Red alert flags on cc folders

hello
does anyone know why I get those nasty red flags on CC folders?
thanks
raffaella

Hi,
Can you now send me some log files?.
The log files can be found here:
Mac: /Users/<yourusername>/Library/Application Support/Adobe/CoreSync/
Windows: C:\Users\<yourusername>\AppData\Roaming\Adobe\CoreSync\
The logs have the date in the filename, like "CoreSync-2014-03-25.log". Please compress (zip) all the CoreSync-2014-MM-DD.log files and email them to me directly at [email protected]
Thanks
Warner

Similar Messages

  • Error message while trying to run red alert 1 in xp

    I have just bought command and conquer: the first decade for windows xp. All of the games other than the first two (c&c 1 and red alert 1) run fine. (I am running XP through boot camp).
    When starting up these two games, I get this error message:
    "Error: Unable to set video mode"
    These games were designed for windows 95 but I am running it windows 95 compatability mode in xp. They just do not load.
    I downloaded the latest patch which was meant to fix this common problem, however it dd not work. I have even gone into the settings folders and upped the screen resolution to 640 x 480 but to no joy.
    I have an ATI Radeon HD2400
    Does anyone have any ideas?
    Andy
    p.s. a lot of pc users have this problem to, not just because of my mac i do not think

    kory wrote:
    I'm trying to use Disk Utility to clone it. I have verified and repaired both the MacBook Pro HD and the external HD with Disk Utility.
    *Hi Kory, Welcome (Back)* to Apple's Users Help Users Forums.
    In addition to Utilities Restore, these are popular Cloners.
    http://www.shirt-pocket.com/SuperDuper/SuperDuperDescription.html
    Purchase at $27.95 will allow smart backups that look at the bu files and only move over new ones. It's quick at ~7 mins to change ~1 gig out of 20.
    Be sure to test that the clone boots and apps behave properly.
    Here are other popular cloners.
    http://www.bombich.com/software/ccc.html
    http://www.prosoftengineering.com/products/drivegeniusinfo.php?PHPSESSID=909c070fb2e13b35097fa9cc1340bfc0
    Good Luck, JP
    Message was edited by: Jpfresno "In addition to ..."

  • Red Alert 2 on Windows 7 Boot Camp

    New MBA 13" 2011.... Installed Windows 7 (Boot Camp) with latest Windows Support tools/drivers from Apple.  Install Red Alert 2 the game but get a graphic glitch where the videos and user menu isn't displayed.
    Anyone help?

    I ran the automatic setup, I did notice that there was an ATI folder there, however I thought the graphics were Intel graphics not ATI on the new MBAs.

  • Re:  Reference field to change red alert message. How?

    Hi FICO Consultant,
    We are using T-Code:  FBL1N, using our com code and execute the report.  In this report, we have used the reference field for company purpose key in the same reference no.: (EX:  789100).  The same number appeared again on the screen (Reference No.).  That time red alert message appeared on the screen or an existing same reference in this field.  Any body gives the idea to me in FICO.
    We expect the reply from you. 
    Thank you,
    Regards,
    Krishnan.

    The icons are a function of the Alert style: that can only be changed in the property palette. I'don't believe there is any way of substituting your own icons for the Oracle ones short of overwriting the Oracle supplied files with graphics of your own. However, we can set the Alert Title and Message Text programmatically with the SET_ALERT_PROPERTY built-in.
    Cheers, APC

  • MMC red alert

    Hi Experts,
    When i started SAP MMC  its starting with red alerts and i am not able to login to server.
    i have checked listener, saposcol, r3trans -d everything is working.
    trc file: "dev_disp", trc level: 1, release: "700"
    sysno      00
    sid        HMT
    systemid   560 (PC with Windows NT)
    relno      7000
    patchlevel 0
    patchno    75
    intno      20050900
    make:      multithreaded, Unicode, optimized
    pid        2596
    Wed Apr 13 20:06:14 2011
    kernel runs with dp version 217000(ext=109000) (@(#) DPLIB-INT-VERSION-217000-UC)
    length of sys_adm_ext is 572 bytes
    SWITCH TRC-HIDE on ***
    ***LOG Q00=> DpSapEnvInit, DPStart (00 2596) [dpxxdisp.c   1237]
         shared lib "dw_xml.dll" version 75 successfully loaded
         shared lib "dw_xtc.dll" version 75 successfully loaded
         shared lib "dw_stl.dll" version 75 successfully loaded
         shared lib "dw_gui.dll" version 75 successfully loaded
         shared lib "dw_mdm.dll" version 75 successfully loaded
    rdisp/softcancel_sequence :  -> 0,5,-1
    use internal message server connection to port 3900
    Wed Apr 13 20:06:18 2011
    WARNING => DpNetCheck: NiAddrToHost(1.0.0.0) took 4 seconds
    ***LOG GZZ=> 1 possible network problems detected - check tracefile and adjust the DNS settings [dpxxtool2.c  5273]
    MtxInit: 30000 0 0
    DpSysAdmExtInit: ABAP is active
    DpSysAdmExtInit: VMC (JAVA VM in WP) is not active
    DpIPCInit2: start server >sapserver_HMT_00                        <
    DpShMCreate: sizeof(wp_adm)          23936     (1408)
    DpShMCreate: sizeof(tm_adm)          3994272     (19872)
    DpShMCreate: sizeof(wp_ca_adm)          24000     (80)
    DpShMCreate: sizeof(appc_ca_adm)     8000     (80)
    DpCommTableSize: max/headSize/ftSize/tableSize=500/8/528056/528064
    DpShMCreate: sizeof(comm_adm)          528064     (1048)
    DpFileTableSize: max/headSize/ftSize/tableSize=0/0/0/0
    DpShMCreate: sizeof(file_adm)          0     (72)
    DpShMCreate: sizeof(vmc_adm)          0     (1440)
    DpShMCreate: sizeof(wall_adm)          (38456/34360/64/184)
    DpShMCreate: sizeof(gw_adm)     48
    DpShMCreate: SHM_DP_ADM_KEY          (addr: 06640040, size: 4659000)
    DpShMCreate: allocated sys_adm at 06640040
    DpShMCreate: allocated wp_adm at 06641E40
    DpShMCreate: allocated tm_adm_list at 06647BC0
    DpShMCreate: allocated tm_adm at 06647BF0
    DpShMCreate: allocated wp_ca_adm at 06A16E90
    DpShMCreate: allocated appc_ca_adm at 06A1CC50
    DpShMCreate: allocated comm_adm at 06A1EB90
    DpShMCreate: system runs without file table
    DpShMCreate: allocated vmc_adm_list at 06A9FA50
    DpShMCreate: allocated gw_adm at 06A9FA90
    DpShMCreate: system runs without vmc_adm
    DpShMCreate: allocated ca_info at 06A9FAC0
    DpShMCreate: allocated wall_adm at 06A9FAC8
    Wed Apr 13 20:06:19 2011
    MBUF state OFF
    DpCommInitTable: init table for 500 entries
    Wed Apr 13 20:06:20 2011
    EmInit: MmSetImplementation( 2 ).
    MM global diagnostic options set: 0
    <ES> client 0 initializing ....
    <ES> InitFreeList
    <ES> block size is 1024 kByte.
    Using implementation flat
    <EsNT> Memory Reset disabled as NT default
    <ES> 511 blocks reserved for free list.
    ES initialized.
    Wed Apr 13 20:06:21 2011
    J2EE server info
      start = TRUE
      state = STARTED
      pid = 3028
      argv[0] = E:\usr\sap\HMT\DVEBMGS00\exe\jcontrol.EXE
      argv[1] = E:\usr\sap\HMT\DVEBMGS00\exe\jcontrol.EXE
      argv[2] = pf=E:\usr\sap\HMT\SYS\profile\HMT_DVEBMGS00_sapserver
      argv[3] = -DSAPSTART=1
      argv[4] = -DCONNECT_PORT=1431
      argv[5] = -DSAPSYSTEM=00
      argv[6] = -DSAPSYSTEMNAME=HMT
      argv[7] = -DSAPMYNAME=sapserver_HMT_00
      argv[8] = -DSAPPROFILE=E:\usr\sap\HMT\SYS\profile\HMT_DVEBMGS00_sapserver
      argv[9] = -DFRFC_FALLBACK=ON
      argv[10] = -DFRFC_FALLBACK_HOST=localhost
      start_lazy = 0
      start_control = SAP J2EE startup framework
    DpJ2eeStart: j2ee state = STARTED
    rdisp/http_min_wait_dia_wp : 1 -> 1
    ***LOG CPS=> DpLoopInit, ICU ( 3.0 3.0 4.0.1) [dpxxdisp.c   1623]
    ***LOG Q0K=> DpMsAttach, mscon ( sapserver) [dpxxdisp.c   11586]
    DpStartStopMsg: send start message (myname is >sapserver_HMT_00                        <)
    DpStartStopMsg: start msg sent
    CCMS: AlInitGlobals : alert/use_sema_lock = TRUE.
    CCMS: start to initalize 3.X shared alert area (first segment).
    DpMsgAdmin: Set release to 7000, patchlevel 0
    MBUF state PREPARED
    MBUF component UP
    DpMBufHwIdSet: set Hardware-ID
    ***LOG Q1C=> DpMBufHwIdSet [dpxxmbuf.c   1050]
    Wed Apr 13 20:06:22 2011
    DpMsgAdmin: Set patchno for this platform to 75
    Release check o.K.
    Wed Apr 13 20:06:23 2011
    DpJ2eeLogin: j2ee state = CONNECTED
    Wed Apr 13 20:07:13 2011
    MBUF state ACTIVE
    Wed Apr 13 20:07:14 2011
    DpModState: change server state from STARTING to ACTIVE
    Wed Apr 13 20:07:56 2011
    ***LOG Q0I=> NiIRead: recv (10054: WSAECONNRESET: Connection reset by peer) [nixxi.cpp 4235]
    ERROR => NiIRead: SiRecv failed for hdl 4 / sock 1428
         (SI_ECONN_BROKEN; I4; ST; 127.0.0.1:1437) [nixxi.cpp    4235]
    DpJ2eeMsgProcess: j2ee state = CONNECTED (NIECONN_BROKEN)
    DpIJ2eeShutdown: send SIGINT to SAP J2EE startup framework (pid=3028)
    ERROR => DpProcKill: kill failed [dpntdisp.c   371]
    DpIJ2eeShutdown: j2ee state = SHUTDOWN
    Wed Apr 13 20:08:01 2011
    J2EE server info
      start = TRUE
      state = STARTED
      pid = 1080
      argv[0] = E:\usr\sap\HMT\DVEBMGS00\exe\jcontrol.EXE
      argv[1] = E:\usr\sap\HMT\DVEBMGS00\exe\jcontrol.EXE
      argv[2] = pf=E:\usr\sap\HMT\SYS\profile\HMT_DVEBMGS00_sapserver
      argv[3] = -DSAPSTART=1
      argv[4] = -DCONNECT_PORT=1583
      argv[5] = -DSAPSYSTEM=00
      argv[6] = -DSAPSYSTEMNAME=HMT
      argv[7] = -DSAPMYNAME=sapserver_HMT_00
      argv[8] = -DSAPPROFILE=E:\usr\sap\HMT\SYS\profile\HMT_DVEBMGS00_sapserver
      argv[9] = -DFRFC_FALLBACK=ON
      argv[10] = -DFRFC_FALLBACK_HOST=localhost
      start_lazy = 0
      start_control = SAP J2EE startup framework
    DpJ2eeStart: j2ee state = STARTED
    Wed Apr 13 20:08:03 2011
    DpJ2eeLogin: j2ee state = CONNECTED
    Wed Apr 13 20:11:39 2011
    J2EE server info
      start = TRUE
      state = ACTIVE
      pid = 1080
      http = 50000
      https = 50001
      load balance = 1
      start_lazy = 0
      start_control = SAP J2EE startup framework
    Wed Apr 13 20:15:58 2011
    ERROR => DpMsgProcess: MsReceive () -> MSEPARTNERUNKNOWN, partner: -                    [dpxxdisp.c   2465]
    Wed Apr 13 20:21:08 2011
    ERROR => DpMsgProcess: MsReceive () -> MSEPARTNERUNKNOWN, partner: -                    [dpxxdisp.c   2465]
    Wed Apr 13 21:15:24 2011
    DpSigInt: caught signal 2
    DpHalt: shutdown server >sapserver_HMT_00                        < (normal)
    DpIJ2eeShutdown: send SIGINT to SAP J2EE startup framework (pid=1080)
    DpIJ2eeShutdown: j2ee state = SHUTDOWN
    DpModState: change server state from ACTIVE to SHUTDOWN
    Wed Apr 13 21:15:25 2011
    Stop work processes
    Regards
    Hemant G

    Hello,
    this could be a memory problem, please check the heap size of you java server(s).
    Please also check note 943498 (J2EE Engine does not start)
    Gretings
    Christian

  • The default priority setting in Mail is set to "normal"  and is causing emails I send to be sent with red priority flag. How can I set default priority to low = no flag?

    The default priority setting in Mail is set to "normal"  and is causing emails I send to be sent with red priority flag.
    I have found the flags to reduce the priorty level manually to "low Priorty", but how can I set default priority to low = no flag?
    Thank you for advising,

    Try deleting the .plist.
    Quit the application.
    In Finder hold down the option/alt key while selecting the Go menu item. Select Library. Then go to Preferences/com.apple.mail.plist. Move the .plist to your desktop.
    Open the application and test. If it works okay, delete the plist from the desktop. 
    If the application is the same, return the .plist to where you got it from, overwriting the newer ones.
    If you want to make your user library permanently visible, run the below command in Applications/Terminal.
    chflags nohidden ~/Library/
    You will need to do that after any updates.

  • Why do I have a red alert pellet on the system pref icon in IOS 6.0.1 ?

    My iPhone 5 is new and from the start there has been a red alert pellet above  the System Preferences icon, exactly like the one above the telephone app to indicate a message.
    I haven't been able to discover what this pellet corresponds to. Any ideas?

    Well that's partly the point, because no. I thought to check that and because the software was up to date—I'd just downloaded 6.0.1—I was really puzzled.

  • AVG Not Recognized on Network Magic --Red Alert

    How do I correct the red alert on Network Magic which says I have no antivirus installed when I just put on the new version of AVG?  Now I have got Avast on the desktop and installed a new version with no red alert about it.  Is AVG not a good antivirus?  (Yes, I decided to try it on the laptop while keeping Avast on the desktop.  Just wanted to see if there was any difference.)  Will I need to uninstall AVG and put Avast on the laptop to keep this alert from being there?  Thanks for any help!  Susan

    Network Magic is still being sold but Cisco is providing no support for it.  I am still finding new uses for it in mapping and checking out my fairly complex home network.  If it was updated and given some bug fixes it would be nice, and make me feel a lot better about Cisco.  But because they've abandoned it and also the WRT610N router, I have finally stopped buying new Cisco products.  While my 610N has buggy (IMHO) firmware, and always runs very hot due to poor ventilation, and has poor range since it no longer has external antennas like earlier models.  I'd love the performance of the latest models but I won't take the chance.
    (Mod note: Edited for forums compliance.)

  • BPMon : Separate email notification on yellow and red alert

    Hi, gurus!
    Does anyone know how to set up for Business process monitoring different email adresses for yellow and red alerts?
    Thanks,
    Szilvia

    Hi Szilvia,
    the only workaround is the way you describe by duplicating the monitoring object. This is of course not the intention as the data collection will take place two times.
    What I would like to understand is the use case behind it. As we implemented BPMon at around 100 customers and never got the request as something critical. Is is just for escalating the problem or what is the idea behind different recipients for different ratings?
    If it thought to be for escalation purposes you have to be very careful as seting the right threshold values is really an art. You probably don't want to bother the next escalation hierarchy with too many problems.
    Regards
    Volker

  • RED footage ProRes Log&Transfer VS ProRes Red Alert

    Anyone noticing a quality difference between RED ProRes encoding in log & transfer compared to Red Alert ?
    Looks like Red Alert images look far more crisp and more contrast.

    Well, if you use Red Alert or Red Cine, you can do a one pass on the footage during the transcode, and if you use log and transfer, you can't... I sort of like doing the one pass if you don't have a Kona card to add a LUT with.
    If you like the look better in the RED software, use it.
    Jerry

  • Red Alert in RZ20

    Dear Gurus,
    In RZ20, under ccms monitoring template -> Buffers, i found the following messages. Please note the swap ratio for " table description, field description and Export/Imort.
    Please suggest me what should i do....
    Startup time of server :     20.05.2010 09:24:12
    Ram Size is 16GB
    PHYS_MEMSIZE is 16373
    Program
        DirectoryUsed    9 %      , Green 05.08.2010 , 16:40:20
        SpaceUsed        100 %    , Red 05.08.2010 , 16:40:20
        HitRatio         99 %     , Green 05.08.2010 , 16:40:20
        Swap             74.9 /min, Yellow 05.08.2010 , 16:40:20
    Screen
        DirectoryUsed    18 %    , Green 05.08.2010 , 16:40:20
        SpaceUsed        100 %   , Red 05.08.2010 , 16:40:20
        HitRatio         98 %    , Green 05.08.2010 , 16:40:20
        Swap             5.2 /min, Green 05.08.2010 , 16:40:20
    TableDefinition
        DirectoryUsed    100 %     , Red 05.08.2010 , 16:40:20
        SpaceUsed        100 %     , Red 05.08.2010 , 16:40:20
        HitRatio         96 %      , Green 05.08.2010 , 16:40:20
       Swap             133.8 /min, Red 05.08.2010 , 16:40:20
    FieldDescription
        DirectoryUsed    8 %       , Green 05.08.2010 , 16:40:20
        SpaceUsed        81 %      , Green 05.08.2010 , 16:40:20
        HitRatio         98 %      , Green 05.08.2010 , 16:40:20
        Swap             119.1 /min, Red 05.08.2010 , 16:40:20
    Export/import
        DirectoryUsed    35 %      , Green 05.08.2010 , 16:40:20
        SpaceUsed        80 %      , Green 05.08.2010 , 16:40:20
        HitRatio         79 %      , Yellow 05.08.2010 , 16:40:20
        Swap             205.8 /min, Red 05.08.2010 , 16:40:20
    Export/import
        DirectoryUsed    28 %     , Green 05.08.2010 , 15:44:47
        SpaceUsed        76 %     , Green 05.08.2010 , 15:44:47
        HitRatio         76 %     , Yellow 05.08.2010 , 15:44:47
        Swap             58.5 /min, Red 05.08.2010 , 15:44:47
    Regards.
    Edited by: Swami Vivekananda on Aug 5, 2010 1:59 PM
    Edited by: Swami Vivekananda on Aug 5, 2010 2:32 PM

    Swami, Red alert or staying green or yellow occurs depending upon the thresholds you have defined.
    By default or defined alert or staying green occurs when your specified hit ratio falls below or above etc. 
    Well, If your question is if "red  alert" appeared for Table Def, Filed Descreption or Export/import hit ratio and what parameters do i need to tweak or indeed if your question is does this "red" mean any underlaying performance issues, its difficult question to answer with given details. Or Probably its not an issue or expected for your system depending on your system confirguation or utilisation or any poor zprogram or some thing else..
    Krishna

  • Red alert shown on setting icon

    just done from the new update,after the systems reboot automatically still red alert shown on setting icon??? please advice

    It could be a carrier update.  Those would show up in settings as well.
    iOS: Updating your carrier settings

  • Getting Red Alerts at a particular process type in Process chain

    Hi Experts,
                       In a Master data chain, We are getting 'RED' alerts in process type ''Delete Target Contents'' in which we have write optimized data.. But the data deletion of that DSO and rest processes are working fine, we can see the reports and all..but we dont understand that why this RED alert coming every day...
    Suggest on it, if any one faced this problem..
    Thanks..

    Hi,
         Yea i checked that message in which "DROP CUBE failed for the Target" but this is a Production system so we cant touch anything now because we getting the reports normally.. We want to look into the Alert with out any changes in current system..
    Thanks,

  • Since upgrading my iphone 5 to OS7, the mail icon displays 11,507 in the red alert box.

    Since upgrading my iphone 5 to OS7, the mail icon is displaying 11,507 in the red alert box. I've tried to select all and mark as read but it keeps defaulting to the previous position. I only want to be aware of the new (genuinely unread) mails. How do I rectify this and go back to the old system which only notified me of the new arrivals?

    I Have same prob. Selecting unreads shows no unread messages

  • RED the flag of the Business Process Engine

    Hello!:
    If we access "http://srvprubpoem:50200/rwb",
    Component Monitoring-Components- the option Business Process Engine is in RED. There is an "JCO request failed".
    Otherwise, if we execute transaction SWF_XI_CUSTOMIZING (to see the problems), there is one DUMP with the text "CHECK_FAILED".
    The transaction SWF_XI_CUSTOMIZING calls the transaction SWFC using the variable SWF_XI_BPM, and here is the other problem.
    Do you know the problem?
    Thanks.

    Hi Alfredo,
    Check out SAP note 1052604 - <i>RAISE_EXCEPTION in CHECK_FAILED exception</i>. It seems to give the solution (either a correction or installation of SP13).
    Regards,
    Thorsten

Maybe you are looking for

  • Transaction type for Account Determination

    This doubt in STO scenario: STO - between 2 plants - different company codes under same client Created STO from Receiving Plant in ME21N with document type NB Based on that STO, Created Delivery in VL10B from supplying Plant Tried PGI in VL02N from s

  • Monitor process on windows or unix environment

    Could we monitor a process using windows or unix environment using OEM?

  • Purchase order created in R3 Is firmed in APO

    Hi All, Is there any way i can unfix the PO in APO?.PO got manully created in R3 and Ciffed to APO. Thanks, Krishna

  • Kernel panic's, crashes and Lion, Lion, Lion

    At first I thougth it was me.. or I should say my system and than I found a lot of people with Kernel panic's and this page. http://rixstep.com/1/20110807,00.shtml When I first saw the new login window in Lion.. for some reason I felt back in windose

  • Ipod nano in car

    I just purchased a new car with a MP3 connection.Am I able to connect iPod nano 1st gen to this outlet and if so what cable would I purchase for it?