Red Blue issue with published DeskI Report in InfoView

Hi everyone,
i'm expieriencing a strange behaviour with my published DeskI Reports.
I'm using logos in my report and they work just fine... in my full client. As soon as I publish them to InfoView and open them up in the browser, then somehow the color red and blue interchange. Red becomes blue and vice versa...
My System consists of:
BOE R 3.1 SP2
Win Server 2008
DeskI and WebI
Has anyone expirienced the same issues?
Thanks and kr,
Nils

Hi Stratos,
so far everything is just fine. Hope you are doing great too.
my IE version is: 7.0.5730.13
Tomcat version: 5.5.20
If I click on the logos in InfoView, nothing happens.
I tested 3 different ways to implement them:
1) via link; pictures shows up, but again with the red blue issue
2) as an object; pictures shows up; also w/ the red blue issue
3) inserted a cell, and pasted the picture in it, pictures shows up; also w/ the red blue issue
The strange thing is, that this issue only appears in the browser.
Thanks,
Nils

Similar Messages

  • Issue with Exceptions in Reporting

    Hi BW Gurus,
                I am still new to BW, Like I have a issue with exceptions in reporting.
                Let me explain clearly, I created a report which gives me two MRP values they are for example V1 and PD(there other MRP types but I am focusing only this two). Here I can see in my report those two values and the overall result of all MRP types (they are 6 different types). My report looks like this for examply
       V1                  46,782,434(this are rough figures)
       PD                  56,232,453
       Overall Result      102,434,111
            Here my requirement is I need to find this overall result like accroding to thresold values this overall result shows RED,YELLOW,GREEN.
            I have given threshold values in exceptions. like
       0           -
    > 45,000,000(Red)
       45,000,001  -
    > 65,000,000 (Yellow)
       65,000,001  -
    > 500,000,000 (Green)
           But according to this values I should get Red( Overall Result), I cant see any change in the overall result.
           Please can some one give advice how to reflect this threshold values in my report.Or I have to select any other options in exceptions.
           Thanks in advance.
    Regds
    Sam

    Not really possible with BEx functions, but if you provide a workbook to users you can just type in this information in a non-Bex cell and save the workbook.
    Else you can try to name your exception such that it shows the value ranges. Then in the report, from the toolbar Layout > Display Exceptions.
    Hope this helps...

  • Strange issue with WEBI schedule Report

    Hi All,
    I have a strange issue with schedule WEBI reports, a schedule report runs for Hours , i reschedule it again by deleting the instance and the schedule report never got succeed even after running for hours.
    Any idea???
    regards

    Hi Manoj,
    1. Try to put some filters in the report and then run the report. if it takes less time, then probably your query is fetching very    large data.
    2. MDX query error may be the reason , this error come when a query runs endless, please try running the query 2-3 times, or when load on server is less.
    Hope this will help,
    Anamika.

  • Large DeskI report in Infoview

    Hi,
    I am getting error u2018No server was available to process the request. Please try again later. (Error RFC 00101) (Error: INF)" while opening a DeskI report in Infoview (BOXIR2 SP4).
    Same error appears while viewing scheduled instances of this report. There are more than 1 million rows in the report. WebI report with same data runs properly. No issue in DeskI full client.
    I applied the workarounds mentioned in the SAP notes 1199258, 1199491, etc. Also tried using dedicated servers for the report; no impact.
    Please advice.
    Regards,
    Hitesh

    Hi Hitesh,
    Following information might help you to resolve the issue.
    Issue might be related to timeouts on the connection server.
                                                                                    Please login into CMC and go Home>servers , locate Input and Output File servers and modify timeout of each to be 60 minutes. Default is 10 mins                                                                               
    This 10min default value can be modified in the registry as well:                                                                  
    HKEY_LOCAL_MACHINE\SOFTWARE\Business Objects\Suit 11.5\File Server\Instances\input.<machine name>                                  
    There is a registry key called u201CServerMaxIdleTimeu201D. Modify it and change the decimal value to 90 (default is 10, max is 90).                                                                               
    After this change is made, please restart CMS and FRS servers and test same again. Please let me know the results.                                                                               
    Regards,                                                                               
    Sarbhjeet Kaur

  • (Error RFC 00101) (Error: INF) Large DeskI reports in Infoview.

    Hi,
    I am getting error u2018No server was available to process the request. Please try again later. (Error RFC 00101) (Error: INF)" while opening a DeskI report in Infoview (BOXIR2 SP4).
    Same error appears while viewing scheduled instances of this report. There are more than 1 million rows in the report. WebI report with same data runs properly. No issue in DeskI full client.
    I applied the workarounds mentioned in the SAP notes 1199258, 1199491, etc. Also tried using dedicated servers for the report; no impact.
    Please advice.
    Regards,
    Hitesh

    Hi Hitestwar,
    Try these notes as well
    1363743 - '(DA0005)... no default driver specified state: IM002' and 'RFC 00101 Error INF' errors when refreshing a deskI report in InfoView
    1202263 - Error: "No server was available to process request. Please try again later. (Error: RFC 00101) (Error: INF)"
    1336210 - when refreshing Desktop Intelligence report in InfoView "No server was available to process request. Please try again later. (Error: RFC 00101) (Error: INF)"
    1423194 - "No Server was available to process the request. Please try again later. (Error: RFC 00101) (Error: INF)" when refreshing a DeskI document in InfoView
    1200315 - No server was available to process the request.Please try again later(Error:RFC 00101)(Error:INF)
    You can do another thing in the "Help & Support" section on the http://service.sap.com/support/ search for "Error RFC 00101" you will get more references to this issue.
    Or try to set logs on the server and check what is happening.
    Thanks,
    Vivek

  • DeskI report from Infoview - doc.zabo_fc

    Post Author: nagh
    CA Forum: Administration
    In BO XIR2, I tried to edit / create a DeskI report from Infoview on a PC, where no DeskI is installed. Then it prompted me to download a file doc.zabo_fc. I downloaded the file; but even then I could not create / edit a report. So is it correct that, even if we invoke Deski through Infoview (to create/edit a report), we should have a local installation of the DeskI ??  Please clarify.

    Hi nagh,
    Thats right. You need to have DeskI Client locally installed on your machine for the create/edit option from Infoview for deski reports. This is the difference from the earlier 6.5.
    Hope this helps,
    Rahul

  • Page size issues while saving Deski report to PDF

    Hi All,
    While saving the Deski report as PDF, the page size changes randomly.
    The workflow is:
    Created a report in Deski.
    -- Chekced in File | Page setup the zoom size(Fit to Print | Adjust to) is 100% and the paper size is A4.
    -- Saved it as PDF.
    -- In Acrobat Reader 7.0, opened the save report, the size of paper is 8.5*11, the normal paper size.
    -- In the report in theFile | Page setup, changed the zoom size to anything less than 100% (e.g changed to 90%) whereas the paper size is A4.
    -- Saved it as PDF.
    -- In the Acrobar Reader noticed that the page size increases to some random size(e.g 9.18*12.99).
    When priting the Document the printer changes the same to A4 resulting in truncating of the content.
    The page size should be same but the content size should reduce.
    The issue can be reproduced in 6.5 and XIR2 as well.
    Is there any workaround for this that the size of the content decrease rather than increasing the page size??

    Hi Sarbhjeet,
    Thank you for all your help.
    Further to our investigation we found that this is known issue and it is a limitation of the Product, it wont be fixed.
    The ADAPT for the same is ADAPT00743734
    It is reproducible with XI 3.1 as well.
    FYI...........
    1. PDF Engine will get the rendering information from the busobj. If there is a character size differences between PDF and busobj, there are chances that you may see bigger cells or reduced data in PDF.
    2. In the report when Fit to 1 page by 1 wide in Pagesetup->FitToPrint, the page size will be set to the fit the complete report in busobj.
    3. When save as PDF, this information (increased page size, due to settings in 2) will be sent to PDF Engine. The Engine will try to fit the size into the available standard PDF size (based on Print settings and other combinations).If it tries to fit the report (enhanced page size) to the available size, then we loose lot of information depending on the number of columns and rows.
    4. Shrinking the report in busobj may not feasible.
    When we change the page size in Fit to Print (either Adjust to % or Fit to ) , in reporter it changes the page size instead of changing the rendering to fit to the page.
    When save the report to PDF, it gets the information with extended page size. So we see the enhanced page in PDF.
    Also in order to implement the shrink (instead of changing the Page size), each cell has to be shrieked to the percentage of the reduced page (compared to the original page size). It becomes more complicated when charts come to picture.
    I hope the above information helps.
    Thanks & Regards,
    Anisa

  • Hierarchy issue with Web Intelligence Report

    Hi All,
    We are facing an issue with OLAP Universe where we are using hierarchy for cost center in reports.
    BEx query shows correct data in RSRT with hierarchy nodes.
    We have built a Universe on top of this BEx Query.
    We are using couple of nodes of cost enter hierarchy in WebI report but if we keep more than one node in WebI query, data comes double (probably because of duplicate rows). Instead if I keep just one of the node in WebI query, WebI report returns correct data.
    Please suggest, why such behavior with OLAP universe and how to resolve this?
    Best Regards,
    Ashish

    Thanks for your suggestions.
    I am little confused on how to check SQL generated for OLAP WebI Query.
    But other reports on same universe behave same way and I'll give a try to another universe but I don't expect it to behave in different way. I saw a setting for relational Universes like restriction on duplicate rows but the same is not present in case of OLAP Universe.
    Do you know how WebI behaves with BEx hierarchies?
    There has to be some setting to make it work...
    Best Regards,
    Ashish

  • Issue with printing lockbox report

    Hi,
    My lockbox report after processing file is giving the total amount and check amount correctly but when I print the same report, the figures don't match with the correct report figures for check amount and advice total.
    Please help....
    Thanks,
    Sheel
    Edited by: Sheel Ahuja on May 19, 2010 11:11 PM

    Hello,
    Please, open a message for SAP on the OSS Marketplace. There are some notes for this type of issue, but they are currently in pilot release.
    So, open a message describing the issue and providing a reproducible example in your system.
    REgards,
    REnan

  • Issue with CRS Historical report scheduler

    Hello guys,
    I have a customer with ipccx 5.02 .
    THe customer could execute manual reports but  the  scheduler reports doesnt work.
    I follow the IPCCX troubleshooting guide :
    1.Stop and start scheduler service.
    2. Connectivity is fine.
    I dont receivce any error from CRS client , i need little help im new in IPCC world?
    Any suggestions please?
    Thanks,
    Carlos

    Hi Anubhati,
    PC is logged during the time that scheduled is programming and also is not in sleep mode.
    I have download the CiscoSch log from CRS Historical report and i found i issue with license :
    INFORMATIONAL Jan 19 2011|17:00:45 Authenticate [email protected]@default user on Application Server 10.181.55.247
    104 ERROR  Jan 19 2011|17:00:45 Getting of total available license info failed
    105 ERROR  Jan 19 2011|17:00:45 Historical Reporting Licenses Available(=0); Report cannot be generated.
    I have the following license :
    UCCX enhanced
    IVR ports 150
    Enhanced seat 22
    CCX Maximum agents 300.
    I generated a report for see how many agents is logged in = 15 .
    Regards,
    Carlos

  • Issue with exporting Financial Report in Smartview 11.1.2.2

    If I export a FR in "Export in query Mode" , it concatenates the parent with the child (parent.child) and does not return anything in Smartview. Even though the report works fine in workspace.
    I narrowed down the issue and it seems if I use Stored member roll up instead of using Shared member roll up it returns the right data when I export the report in Smartview.
    So the issue is only with the FR using Shared members.
    Does anyone know if this is a known issue or can replicate this in their environment ? We are on version 11.1.2.2
    Thanks

    Nope that didn't work, but I figured out the error. I was running the command on a client machine. When I run the command on the server itself, it works fine.. well, now I have issues with my POVs, but at least it's finding my .csc file.
    Thanks for your help John.

  • How Can I Schedule a Deski Report in Infoview that has a VBA Macro

    Hi experts,
    i've made a report that has a vba Macro. I published it in infoview. If I launch it manually (clicking on the refresh button) the macro works normaly. If I schedule it the macro doesn't work.
    What can I do?
    Is it possible to make a program that simulate the opening and click on the refresh button?
    Or i there is another solution?
    Here is my Macro:
    Private Sub Document_AfterRefresh()
    Dim filtervar As Variant
    Dim filterText, Filter As Long
    Dim DocName, NewName As String
    Dim Pathing, TodaysDate As String
    Dim folderName As String
    TodaysDate = Format(Date, "DDMMYYYY")
    Pathing = "
    Ktsdwh0\c$\OutputBO\"
    DocName = ThisDocument.Name
    filterText = "Dpre Cod Produttore"
    filtervar = ThisDocument.Evaluate("=<" & filterText & ">", boUniqueValues)
    For Each sepval In filtervar
        Filter = sepval
        For n = 1 To ThisDocument.Reports.Count
            Call ThisDocument.Reports(n).AddComplexFilter(filterText, "=<" & filterText & "> = " & Filter)
            ThisDocument.Reports(n).ForceCompute
        Next n
            MkDir (Pathing & Filter & "\")
            NewName = Pathing & Filter & "\" & Filter & "-" & TodaysDate & "-" & DocName   'for Prova_Prod.rep
    '        NewName = Pathing & Filter & "-" & TodaysDate & "-" & DocName   'for Prova_Prod.rep
            ThisDocument.ExportAsPDF (NewName)           'to Save as PDF
    Next
        For n = 1 To ThisDocument.Reports.Count
          Call ActiveReport.AddComplexFilter(filterText, "=<" & filterText & "> = <" & filterText & ">")
            ' To delete a Complex Filter, you set it equal to itself...
          ActiveReport.ForceCompute
        Next n
    End Sub
    Please Help!
    Best regards
    Camillo

    Hi Philippe,
    If you are using Windows 2003 with SP2 then it might be the issue as already logged for BOXIR2.
    You can test the issue by using only Windows 2003 without SP2.
    In case your operating system is only windows 2003 then following information and code might be helpful for you to resolve the issue.
    There are a number of things to check when setting up a macro to work through Infoview or scheduled. The first thing is that the macro needs to be triggered to run. This is done by putting a call to the macro in the Document_BeforeRefresh or the Document_AfterRefresh event handler.
    The report server and job server are designed to process one report at a time. Through a macro it is possible to open more than one report, and do various processing with those additional reports. Since the report and job servers are not designed to process more than one report, your macro should not open an additional report.
    The fact that only one report is processed at a time also affects the syntax you should use when referring to a document or report object. In the DeskI client you can use the ThisDocument object to refer to the report which is running the macro. You can also use the ActiveDocument object to refer to the report that is currently displayed. Most of the time these two objects will point to the same report. When the report server or job server process a report there would never be the possibility for a different report to be active, so the ActiveDocument object does not exist. This also applies to the ActiveReport object. Instead of using ActiveDocument your macro code should use the ThisDocument object. Instead of using the ActiveReport object you should use ThisDocument.Reports.Item(1) to refer to this first report tab in a report.
    These items are the most common issues that will cause a macro not to run through Infoview or when scheduled. The best way to debug a macro which is not working in either of those places is to include code which will log the macro's progress to a file. This makes it easy to determine exactly which line of code is causing issues so that it can potentially be corrected.
    #Region u201CWeb Form Designer Generated Code "
    'This call is required by the Web Form Designer.
    <System.Diagnostics.DebuggerStepThrough()> Private Sub InitializeComponent()
    End Sub
    Private Sub Page_Init(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles MyBase.Init
    'CODEGEN: This method call is required by the Web Form Designer
    'Do not modify it using the code editor.
    InitializeComponent()
    End Sub
    #End Region
    Private Sub Page_Load(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles MyBase.Load
    Dim myInfoStore As InfoStore
    Dim myEnterpriseSession As EnterpriseSession
    myInfoStore = CType(Session("InfoStore"), InfoStore)
    myEnterpriseSession = CType(Session("EnterpriseSession"), EnterpriseSession)
    Dim DOCUMENT_NAME As String = "document_name"
    Dim query As String = "Select SI_ID, SI_NAME, SI_SUBJECT, " _
    & "SI_COMMENTS, SI_OWNER From CI_INFOOBJECTS Where SI_KIND = 'FullClient' " _
    & "AND SI_INSTANCE=0 AND SI_NAME='" + DOCUMENT_NAME + "'"
    Dim myInfoObjects As InfoObjects = myInfoStore.Query(query)
    Dim myInfoObject As InfoObject = myInfoObjects(1)
    Dim myDeskiDoc As FullClient = CType(myInfoObject, FullClient)
    Dim mySchedulingInfo As SchedulingInfo = myDeskiDoc.SchedulingInfo
    mySchedulingInfo.Type = CeScheduleType.ceScheduleTypeOnce
    mySchedulingInfo.RightNow = True
    Dim myFullClientFormatOptions As FullClientFormatOptions = myDeskiDoc.FullClientFormatOptions
    myFullClientFormatOptions.Format = BusinessObjects.Enterprise.Desktop.CeFullClientFormat.ceFullClientFormatFullClient
    myInfoStore.Schedule(myInfoObjects)
    End Sub
    End Class
    I hope this will help you.
    Regards,
    Sarbhjeet Kaur

  • Unable to run Store Procedure based deski report in Infoview

    Hi All,
    I have a Deski report which is created using Store Procedure. I am able to run report in Full Client Deski. But I am unable to run / schedule same report thorough infoview.
    More details about report
    - Report uses 3 store procedures. When I ran report in infovew I get error message as "SP2 Dataprovider did not refresh properly".  -- SP2 is Dataprovider name.
    - Same report I am able to run in Dev environment. After migration to Model, report fails to run in model infoview.
    - I am able to Run report only for 1st. When I refresh and run with same parameter report shows error.
    Any input will be great help.
    Thanks,
    NV

    Hi,
    Could you please test the following solutions to resolve the issue.
    Solution1:
    Test the issue by inserting the following parameter in .SBO file.
    <Parameter Name="Force SQLExecute">Always</Parameter> .
    Solution2
    Just put SET NOCOUNT OFF in the end of the stored procedure SQL.
    If the above doesnu2019t works then please try the following solution.
    Solution3
    Make the new connection from the scratch using ODBC connection and test the issue.
    I hope this will help you.
    Regards,
    Sarbhjeet Kaur

  • Err:INF - access to the deski reports by InfoView

    Hi,
    If user do not have rights to the deski application,
    when trying to view the report deski by InfoView - receives an error ERR:INF.
    When you get right to the application deski this is ok.
    I can not find a solution to the problem.
    regards
    Krys
    PS.
    BOXI R2 SP4, Win2003, Apache/Tomcat
    Edited by: Krzysztof Nowicki on Nov 3, 2009 10:31 AM

    We had a similar problem when opening a deskI report with the pdf-viewer. It was solved by the following:
    DesktopIntelligenceProcessingServer : at the end of the textbox Command Line Parameters, change -allowSilentRefresh false in -allowSilentRefresh true
    DesktopIntelligenceCacheServer : at the end of the textbox Command Line Parameters, change -allowSilentRefresh false in -allowSilentRefresh true

  • Error while scheduling DESKI report in infoview

    I m scheduling a DESKI report to users enterprise inbox from infoview using a server group. This server group has DesktopIntelligence Job server, Destination Job server, Adaptive Job server and Program Job servers and all these servers are running.
    When I schedule the report to boldusers enterprise inboxbold it get failed and shows this error message
    bolddestination DLL disabled. []: [CrystalEnterprise.Smtp] bold
    I m wondering what has to be enabled for scheduling a report to infoview's own inbox.

    Abhilash
    You are correct that it shows all the prompts but only when we run the report either directly from the CR Designer or via View on Demand in Infoview/CMC.
    But if I try to schedule an instance of this report, I am getting a check box in the parameter section which says "Show unused parameters" to see this dyanamic prompt. And When I check that box in Infoview still I am not able to select any value for this prompt as it's greyed out.
    Hope I am able to explain my query to you.
    Also attached a screen shot of the scenario for your reference.

Maybe you are looking for