Red button problem

I have a nokia n95 8gb. And there is a problem with red button. I does not cancel active calls and does not close the applications after pressing it. What could be the problem and solution for that??

Upgrading / Re-installing the firmware and / or a Soft Reset MAY solve.. but most probably looks like hardware problem and you will have to show it at Nokia Care..
Pl. take a back-up before any of the above..
--------------------------------------------------------------------------------------------------------------------------------------------------------------If you find this helpful, pl. hit the White Star in Green Box...

Similar Messages

Red Close Button Problem

Hi there,
After i have installed the mavericks update for my macbook pro, i had started having a problem in closing my apps or browser or files with the red X button,
When i click on the button to close my apps it doesnt work at all unless i drag the app or browsers a little bit and then close them. This is annoying, So if someone can help me fix this bug or something.

A Safe Mode boot deletes some system caches that may help.
Startup your Mac in Safe Mode
A Safe Mode boot takes much longer than a normal boot so be patient.
Once you are in Safe Mode, click Restart from the Apple () menu.
Then try the red button.

When I try to open yahoo bookmarks (red button) on Firefox I get a "page not valid" or some otgher error message (works okay with Explorer.

I recently done an upgrade on my PC (can't remember what). since then I haven't been able to open or log in to my Yahoo bookmarks (red button on tool bar). I get a log in screen, but when I log in with my Yahoo ID and password, I get "This page expired" error message. I've gone the the help menu and reset my yahoo password, but it still won't let me log into yahoo bookmarks with Firefox. If i use Explorer, it works fine. I like Firefox, but I need to be able to access yahoo bookmarks.

Hello,
Many site issues can be caused by corrupt cookies or cache. In order to try to fix these problems, the first step is to clear both cookies and the cache.
Note: ''This will temporarily log you out of all sites you're logged in to.''
To clear cache and cookies do the following:
#Click the menu button [[Image:New Fx Menu]], choose History, and then Clear Recent History....
#Under "Time range to clear", select "Everything".
#Now, click the arrow next to Details to toggle the Details list active.
#From the details list, check ''Cache'' and ''Cookies'' and uncheck everything else.
#Now click the ''Clear now'' button.
Further information can be found in the [[Clear your cache, history and other personal information in Firefox]] article.
Did this fix your problems? Please report back to us!
Thank you.

Nokia 5530 XM Touchscreen (red button) not working...

I bought my nokia 5530 for about 4 months and i had dropped it a couple of times..
But before that it did not experience any serious damage.
It was until recent i accidently dropped it AGAIN and i found out that the red button is not working anymore.
Is there any solution to fixed it??
Thanks in advance for any help..

If you want to try something yourself, Dial this code as normal phone number *#7370# enter your lock code default is 12345. (BACKUP DATA FIRST)
BUT
it seems a hardware problem,and i suspect what i suggested above won't help So visit your nearest Nokia Care Point and have it checked:
http://europe.nokia.com/support/repair-and-recycle/repair/care-points
Previous Phones: 6600, 7610, 6230, 6230i, 1100, 1112, N70, N73, N95, N95 8GB, 5800XM, 5230, C5, iPhone 3GS, SE Xperia X10, N900, N8, SE Xperia Arc
Current Phones: Nokia N9, iPhone 4

BLACK DOT INSTEAD OF X IN THE RED BUTTON TO CLOSE

I have a strange behaviour of an Excel file. In the red button to clese the window in the left upper corner there is a black point always visible instead of the usual x that appears only if you go there with the mouse.
This file frized last time I tried to close it but now it works OK even if there is this strange point.

Thanks Charlie.
Even if I noted it yesterday I went back (Time Machine) and I could see the same bahaviour 1 mont ago. The file probably is corrupted in come way (hile I open a message says it has Macros but if I try to remove it I do not find any Macro.). The black point is there at the opening and yesterday was impossible to remove it. Now I open it and it appears immediately, I save the file and it goes away. Strange. I am moving to Numbers. It tkes some work to adapt the XLS files to numbers but it works.
In this case I had no problems. I will try to forget Excel.
Thanks again

I just did an update to 6.0 on Lion. Now when I re-open Safari after closing it by clicking the red button it re-opens to my home page, not all my previous tabs.. prior to the update it would re-open with all my previous tabs, which is what I want.

I just did an update to Lion 10.7.4 with Safari 6.0. Now when I re-open Safari after closing it by clicking the red button, it re-opens to just my home page, not to all my previous tabs as it did before the update. I prefer having my old tabs re-open. How can I fix this?

I've had what I think is the same problem since the most recent software update. I have Lion 10.7.4 and have updated to Safari 6.0. The most noticeable difference is that where previously I had two boxes at the top of the Safari window (one to enter URL addresses, one for Google searches), there is now only one box for both functions. I don't like that as well, but I can live with it. However, since the most recent software update my "back button" only works about 5% of the time. Most of the time it is grayed out. So I usually can't get back to previous pages using the back button. Also, when I've clicked a link that opens a new window (for instance, going through the return process at Amazon, I clicked UPS locator and it opened a new window), where in the past I would have just clicked the red button after I had the information, the UPS locator window would have closed, and I would have been back at Amazon - now if I close the UPS locator window, all Safari windows close. The Safari application doesn't close, but the Amazon window closes, I'm back to an empty screen, and I have to open a new Safari window and reenter everything. I'm using a work-around of clicking on History and selecting the description of the window I want to get back too, but that only works part of the time. In the Amazon example, that's what I did once I had the UPS info, but even though I clicked the correct window description, it took me back to the beginning of the return process & I had to reenter all the info. Of course, that info was easy to reenter, but if I'm in the middle of a complicated process, it's a big problem. I've filed a bug report; I surely hope the Apple engineers are able to fix this. I'm used to using the back button function a lot!

I have a Time Capsule on which I back up 2 MacBooks and on my wife's machine she keeps having Airport Utility popping up all the time with a yellow button flashing on the left and a Red button on the right side with a "1" in the middle of it.

I have a Time Capsule on which I back up 2 MacBooks and on my wife's machine she keeps having Airport Utility popping up all the time with a yellow button flashing on the left and a Red button on the right side with a "1" in the middle of it. Can any one tell me what is wrong. I read where when the yellow light was flashing there was a problem, but I am a novice at this and have no idea where to turn. It seems to be backing up on a regular basis.

On the Mac......
Open up Macintosh HD > Applicatons > Utilities > AirPort Utility
Click on the Time Capsule icon, then click Edit in the small window that appears
Click the Network tab at the top of the next window
Change the setting for Router Mode from the current DHCP and NAT to read Off (Bridge Mode), then click Update at the lower right of the window, and wait a full minute for the Time Capsule to restart to a green light.
Then.....very important
Power off the Time Capsule and your Arris modem/router for a few minutes
Start up the Arris first, and let it run a few minutes by itself
Start up the Time Capsule next the same way
Your network will now be correct, and your printing capabilities will improve.
If Time Machine backups do not occur now, post back and we will tackle that next.

Nokia 5233 Touch button Problems

I just bought the new Nokia 5233 phone.
Whenever the phone is locked and I set a alarm. There is no way i can stop the alaram other than to reset the alarm manually by alarms-> edit.
There will be two touch buttons that apper on the otuch screen. One to stop and other to snooze the alarm. Even If press them, it wont work. The alaram keeps ringing. I even tried clicking on the green button and the menu botton at the bottom. Still no use. I cant even unlock the phone. Only thing i can do is press the red button at the end, which will snooze the alarm. After this, I have to manually change the alarm time.
The same thing happens even with phone calls. I cannot use the touch button that apper on the touch screen. I have to use the green and red button at the bottom.
These problem come into picture only if the phone is locked. Otherwise it works fine.
What can I do to solve this??
Expecting a quick reply.

Hi there,
you right abt getting two option of stop and snooze, try sliding your finger along the arrow rather than presssing the botton...you can pres the red button to put in to snooze also.
I believe you will same issue when you recieve your call while your phone is locked, you get "unlock" and "answer" option, out here too slide you finger along the arrow.
i hope this will help you.

Block removed only pressing the red button some seconds

I'm facing a problem from 2 days. My 8500 curve freezes, and after I need push the red button for some seconds, after I can use it almost normally.
Almost, because it seems the "o" key in the keyboard is pressed also when I don't press it. After some seconds, the things turn normally.
I suspect a software problem,
Thank you

Hello infolabsas,
Welcome to the forums.
In this case we can try to reload the software on the BlackBerry® smartphone to make sure it is running the latest version and there are no issues with the OS.
Here is how to backup your BlackBerry smartphone http://bbry.lv/oPVWXc
Once you have backed up your BlackBerry smartphone please follow the link below to complete a clean reload of the BlackBerry smartphone software.
Link: http://www.blackberry.com/btsc/KB03621
Once completed test it and proceed with a selective restore, here is how to restore http://bbry.lv/qgQxLo
-SR
Come follow your BlackBerry Technical Team on twitter! @BlackBerryHelp
Be sure to click Kudos! for those who have helped you.Click Solution? for posts that have solved your issue(s)!

Red button in ios 7 and 7.1

hello
i have problem with ios 7.1
in ios 7 and older when u wanted to end the call u hade to click to the red button and u had a big red rectangular and u press that and u could to end the cal but now in ios 7.1 u have a small circle button for end the call and u must pay-attention first and then end the call and its harder than ios 7 and older
please back the last big red rectangular to the ios for end the call it was so better.
Thank You

Tell Apple:
http://www.apple.com/feedback/iphone.html

Is there a way of quitting an app only by pressing on the red button?

Hello.
I'm a new Mac user (my MacBook Air bought on April, 17th).
I was wondering, is there a way of quitting an app by pressing on the red button only, without pressing on the app name on the menu bar and and then on "Quit X"?
If it's possible, I will be glad to here the way.
Idanref.

No. The red x closes the window but not the application. An exception is when an app can only have 1 window open. (Like system preferences). A quick way to close the app is to press CMD Q on the keyboard.
Regards,
Captfred

How do i close the welcome to iMovie screen? Clicking on red button in upper left does nothing. SOS! Thanks!

How do I close the "Welcome to iMovie" screen? Clicking on the red button in the upper left does nothing. SOS! Thanks!

"Continue" was hidden at the bottom of the welcome screen because my display was changed. Some days I'm smarter than others. Or.... :-)

Mega Sky 580 - RED Button Issue

Hi All,
Just got one of these cards, not bad but a lot of messing about with Aerials. Anyway I have installed the software with it, but was wondering what else I could use and also the remote you get with these things doesnt have the good old RED button to go into interactive mode. Does anyone have any ideas.
Thanks
Ned

Try some different TV software. Ever tried MediaPortal?
http://www.team-mediaportal.com/

Caller screen Buttons problem Z10STL100-1

I have Z10STL100-1 after official update Z10STL100-1/10.3.1.1565 having caller screen Buttons problem these are little above not like it's on 10.2 very below position. I security wipe and restart many times still same position of buttons? See pic attached

Hello,
Did you check if there are no objects on that index slide that have a fading transition? You should set the transition for every object to 'No transition'. The transition can be found in the Properties dialog, tab Options.
Lilybiri

Red Button....or lack of !!

I got fed up over the weekend, again, with the lack of the "red button" on the BT Vision box. I submitted a question to BT Customer service and stated that I had seen posts in here from 2012 saying "it was being worked on" and asked how much longer we had to wait.
I received a call from them to advise "it was still being worked on" but there was no indication how long this would take.
Even the most basic Freeview set top box has this facility, but the piece of junk BT Vision box does not.
When is BT management going to take notice of customer comments and actually do something about things like this instead of blowing their own trumpets and saying how good the service is ?
Have they not paid any attention to recent surveys which put their customer servic way down the league tables ?
Rant over.....for now !!!
Has anyone else had any better info about when we can expect the red button ?

pangit wrote:
I got fed up over the weekend, again, with the lack of the "red button" on the BT Vision box. I submitted a question to BT Customer service and stated that I had seen posts in here from 2012 saying "it was being worked on" and asked how much longer we had to wait.
I received a call from them to advise "it was still being worked on" but there was no indication how long this would take.
Even the most basic Freeview set top box has this facility, but the piece of junk BT Vision box does not.
When is BT management going to take notice of customer comments and actually do something about things like this instead of blowing their own trumpets and saying how good the service is ?
Have they not paid any attention to recent surveys which put their customer servic way down the league tables ?
Rant over.....for now !!!
Has anyone else had any better info about when we can expect the red button ?
Why not upgrade to the YouView box which is a far better bit of kit and has red button + according to the YouView forum, will also gain support for the new Connected Red Button service later this year.

Red button problem

Similar Messages

Maybe you are looking for