Red canvas screen?

Why is my canvas screen Red tinted all of the sudden when it is paused. It's normal during playback.

Is your Canvas set up any differently than the illustration below?

Similar Messages

"Display Unavailable" red canvas screen-forum solutions not working. URGENT

I a few days ago I started getting, in the midst of editing, my canvas going red with the message "Display Unavalible" in it. After this, the sequence would not play. If I close the sequence and try to reopen it, I get an error window which just says "error:out of memory". I found this problem on the board and tried three solutions: deleting all of my render files in render manager (didn't work); trashing FCP preferences (didn't work); checking for any CMYK stills in the timeline (there were none, but there were greyscale clips, I removed them, still didn't work ); and making the sequence offline, then reconnecting all clips and re-rendering (that worked, then it happened again after working a while).
I am in a very tight deadline situation for the screening of this film and must find a solution to this problem! Other sequences in the same project appear to play okay. It seems to be this sequence only. I have done a few things differently in this sequence than I have in others. Maybe they could provide some clues as to what might be causing the problem.
1. I upgraded Magic Bullet for Editors and have applied several effects (problem started after installing MB, for what it's worth).
2. I am also using Natress filters (including frame rate conversion/deinterlacing) on top of Magic bullet filters.
3. I have dv source footage which I have enlarged up to 300%, sometimes with filters applied to those clips (yes I know this is highly unorthodox but this is a punk rock movie and I am experimenting).
The last thing that I did was remove frame rate conversion from all Natress effected clips that also had Magic Bullet Filters on them, reduced all clips to 100%. Then when I when to reconnected the clips the **** thing did it again.
Is there anyone out there who can help with this? I can pay for extra assistance if necessary!
Thanks so much,
Patrick

Thank you for that, I also found this article, silently hoping that this was not the case. On one hand this is good news, as I can get it repaired for free, while on the other I now need to find a way to back up my data without my screen.
As a side note the computer screen did light up last night, on a random restart. However, it once again will not turn on, and I may have lost my chance to back up my data. The symptoms fit a burned out video card, so I guess my next step is heading on over to the apple store.
Thanks again for the article, I'll be printing it off and bringing a copy with me.

Installed the update tonight and now my phone (Lumia 928) won't power up. I've tried a soft reset, but the screen goes from the Nokia logo to a red Verizon screen to a black screen. What's wrong and how do I fix it? Help!

Installed the update tonight and now my phone (Lumia 928) won't power up. I've tried a soft reset, but the screen goes from the Nokia logo to a red Verizon screen to a black screen. Tried it 10 times with the same result. What's wrong and how do I fix it? Help!

Oh no Mr.Ected!
I can see if we can get your phone back on! I understand how important it is to have a phone. Have you tried this to see if we can get it back on? http://vz.to/1DZhteH . If it is still goes to a red Verizon screen and then to black we might need to do a master reset. While the phone is off try this:http://vz.to/1DZhXkU Be mindful this is the last resort because it will erase everything on the phone. If you have done back up assistant in the past you will be able to get you contacts back. Please let me know if you need any more help.
AmberF_VZW
Follow us on Twitter @VZWSupport

How to show a Canvas screen before exit the midlet

If i want to show a canvas screen after user click exit to quit the midlet (after call the notifyDestroy()), any way to do that? thanks.

Hi,
you have to catch the exit event in the commandAction method and there you will display a YES/No form:
create your YES/NO form:
Form yesNoForm = new Form("Exit?");
yesNoForm.append("You are about to exit the application!Exit?")
yesNoForm.addCommand(new Command("Yes",Command.OK,1));
yesNoForm.addCommand(new Command("Cancel",Command.CANCEL,0));
yesNoForm.setCommandListener(this);
!!!Note you can write your own command classes extended from the Command and add those to yesNoForm, that way you will have a better control on the application.
commandAction(Command c, Displayable d){
if (c.getCommandType() == Command.EXIT) {
display.setCurrent(yesNoForm);
if(c.getCommandType() == Command.OK){
destroyApp(true);
notifyDestroyed();
if(c.getCommandType() == Command.CANCEL){
display.setCurrent(mainForm);
This should work.

The applet fails to load. with 'red cross' screen JVM 1.6.19 and above

After updating the JVM to one of the latest version 1.6 builds, our users started to experience a problem with opening java applets.
All the users have JVM versions 1.6.0_19 – 1.6.0_26 on Windows 7/2008. The browser is IE8. On the server usually there is IIS7, with ‘Integrated Windows authentication’
on applet’s virtual folder. Applet’s classes are packaged into a signed JAR file. Both the client and the server are located in the same local area network with no proxy or firewall between them.
The applet’s website usually belongs to the trusted security zone. When loaded, the applet establishes HTTP connection to the server to get the necessary data.
When the user tries to open an HTML page containing the applet, there can be the following scenarios:
1.     The applet fails to load. We’re getting a ‘red cross’ screen. All the HTML elements except of the applet are loaded OK.
From the IIS log we can see that the loading of the JAR file failed with the error code 401, the user name field in the log for the JAR is empty.
2.     The java asks for the user name and password showing a popup ‘Authentication required’. At this moment we can see the following message in the Java console:
network: Firewall authentication: site=/XX.XX.XX.XX:XX, protocol=http, prompt=, scheme=ntlm
If the user enters the correct credentials, the applet loads OK. Even if the user checks the ‘Save the password in your password list’ checkbox, Java continues to ask for credentials
on every page reload. It’s worth to note that the company’s external firewall doesn’t get any requests from the applet.
The problems happen even when the client and the server are located on the same machine, but never happens when we use localhost as the server name in the page URL.
During investigations we found out the following workarounds:
1.     Enabling anonymous authentication on the virtual folder always solves the problem.
2.     Sometimes, changing security zone from ‘Trusted’ to ‘Local intranet’ solves the scenario 2 (‘Authentication required’ popup) problem.
It’s worth to note that changing the security zone never helps if the page URL contains dots (for example, uses IP address instead the server name).
3.     Upgrading to IE9 solves the scenario 2 problem partly: Java asks for the credentials only once.

I have the same issue. I use single sign-on with IIS 7 and Integrated Window authentication on the tomcat virtual folder. The applet jar file is on the root directory of the web application (the same level of index.html). So I use '.' as the code_base to call the applet from javascript.
So when I launch my web application into a browser, the auto-connection is successfully performed (single sign-on through Upstream, kerberos, remote_user, ...). But when I want to launch the applet in the web application, a new authentication panel (red panel with "authentication required") occurs in order to set credentials (login, password, domain) with the message in the java applet console:
"network: Firewall authentication: site=myApplicationUrl, protocol=http, prompt=, scheme=ntlm"
So why the applet doesn't inherit previous credentials in this case ??
Have you solved this problem ?
Thanks
Edited by: 886341 on 20 sept. 2011 08:56

HT1212 how do i fix the red disabled screen

my homie locked me outta my ipod touch he set up a password then disabled it what do i do i cant even fix it in itunes

Place the iPod in Recovery Mode and restore via iTunes.
iOS: Wrong passcode results in red disabled screen
If not successful, try DFU mode.
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings

My I pad has a red blotchy screen and keypad has gone blue? Any ideas how to solve?

MY iPad has a red blotchy screen and keypad has gone blue, any ideas if I can rectify this?

This happened to me a few times. Take the case off and sit down, give it (Back side of ipad) a hard smack on your thigh, but do it in a way that the back lands flat on your leg. There are some component cables that can come loose and this smacking motion can cause them to go back into place.
*be cautious so you don't dent the Ipad*

Webutil canvas screen

hi all
when i run the excel form.i attached libraries and created object groups so when i run the form then i get webutil canvas screen.
i donot want to display that small screen anyone can guide me how to disable it?
any suggestion?
Applications server 10G version 9.0.4...
sarah

when i run the excel formWhat is "The excel form" ?
i donot want to display that small screen anyone can guide me how to display that it?If you don't want to show to WEBUTIL-canvas, then create your own canvas, but an item on it and make that item the first navigable item in the first block.

Red startup screen

I uninstalled a backup program and restarted my mac.
I got a red startup screen and login in to my account.
All my data is still there, but it like a new machine,
Asking me to verify my mac, iMessage, iCloud, some apps don't work or license is gone for new computer.
Not sure what to do macbook pro 10.10.3
Help

Reset PRAM. http://support.apple.com/kb/PH18761
Reset SMC. http://support.apple.com/kb/HT3964
Choose the method for:
"Resetting SMC on portables with a battery you should not remove on your own".
Start up in Safe Mode. http://support.apple.com/en-us/HT1564
Repair Disk. http://support.apple.com/kb/PH5836
Best.

Ipod stuck on red charge screen

Hi,
i have a 3g 8gb mc ipod touch that worked well for 1 year and a half but now
it is stuck on the red charge screen if it is connected with the usb cable to a power source else it is dead;
it isn't really stuck,when i press the home or the power button or i connect it, it shows the screen but after 10 seconds the screen goes black again.
the ipod is out of warranty
i can't get it in recovery, dfu or else--> i can't restore it.
Thanks in advance for the answers
Francesco

Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar

Why when I publish template to FCPX the design appears as a thumbnail but the view shows the red warning screen with the Number 2?

why when I publish template to FCPX the design appears as a thumbnail but the view shows the red warning screen with the Number 2?

That is priceless!!! Thanks! I sure needed a good laugh after spending/wasting hours & days trying to either get my c6280 to give up on its Ink System Failure fixation, or find a decent replacement. Unfortunately I need the Smart Web Printing feature that I guess only HP has, or I'd try a different brand. And now even HP has very few models with that available.
My error msg is a little different from those previously stated, but close: 0xc18a0201. Even tho there were frustrations with my c6280, I did like several of its unique features which are hard to find now under $100. I hate how HP (& I suppose other brands also) are CONSTANTLY changing models & then of course ink cartridges.
Oh heavens, I've had the c6280 a whopping 2 1/2 years! I'm sure they want us poor slobs to have to buy a new one every year & a day! To say nothing of the exorbitant prices for ink. And now if this one is really dead in the water, I have SIX unused #02 ink cartridges which I cannot return---I got them in a combo pack, & for some reason have wound up with THREE lite pink & THREE lite blue cartridges, while having to buy extras of the other colors, that ran out before the others!!! Yeah, & what's with that not being able to print in BLACK if a color runs out????
Anyway I really loved your essay! It's a classic! And says it all! I hate that we have to be 'slaves' to the electronic 'wonders'!!!

Hp notebook just shows a red blinking screen when turned on,can go to esc startup

Hi I have a Comp Hp presario CQ56 notebook pc,windows 7. I turned on my notebook
and it only shows a red Compaque screen and it blinks,I can how ever click on esc
and can go to the startup menu,I have ran the diagnostic tests and everything passes.
I can't figure out why nothing else loads,I also noticed that it gets very hot I have only
had it for 9months,could this be my motherboard?I can't boot in safe mode to even scan it
for a virus.do you know whats causing this and what I can do?
Thank you

Your issue sounds the same as the one I am having on my HP Pavilion dv6 purchased 14 months ago. Yikes out of warranty. I have owner only HP's laptops, about 4 so far. I even had a mini HP that I accidently left out in the rain overnight. The screen would not display after that I was surprised it even powerd up but I just keep it and then one day before I was giving it to Goodwill I decided too try one more time. Amazing it started up and worked like before. I gave it to my grandson and he still uses it.
I also recommend HP laptop to my daughter which I now regret doing because she said she has seen some issue. I told her to take it in she still has a warranty.
Are you still draining the battery to be able to startup without having this issue? I see that some have completely removed the battery.
If HP can't help with this issue they need to recall all of the models affected.
I hope someone can help us.

Help! Canvas screen is blank

My canvas screen is blank. I cannot see video in there.
I can see video in viewer and my timeline is working.
Thanks!

Sounds like you have wireframe selected. Click on the right hand drop down menu of the three buttons at the top of the canvas and select "image" or "image + wireframe".
DM

Screen splitting error and red boot screen

Hi, I was using my macbook pro just now and the screen started to glitch and show black vertical bars and the displayed image was split up. I tried to see if there's an unresponsive program that i can force quit then the screen just turned grey and was stuck there.
I then manually restarted the mac, it prompted me with a press button to continue booting up screen then it was stuck on the grey screen again.
I tried to start in safe mode then it booted with a red screen and i believed did a system check. But I'm not sure. It then got stuck on the grey screen again.
I rebooted the machine manually and then now it booted up fine.
It has happened twice before. Once the split screen issue was solved by quitting Spotify and the second time similar events happened as described above.
I have previously taken the mac to the genius bar and they ran a hardware check and found that everything was fine. Since I couldn't reproduce the error whilst being in the store they said there was nothing they could do.
Update:
The screen splitting issue has occurred at least twice since the event happened above. I have managed to collect another problem report which i can show in addition to the first one.
I believe that there is a problem with the dedicated graphics card since whenever i use gfxCardStatus to switch to the AMD Radeon HD 6490M graphics card the screen splitting problem occurs. The problem also occurs when the machine automatically switches to the dedicated graphics card with things like Spotify, Google maps and other more intensive applications. Moreover, the second time the problem occurred when i was streaming a TV show and gfxCardStatus showed that the machine has switched to the dedicated Radeon card.
I'm not sure what i can do about it right now other than trying not to use the dedicated graphics card. Any help would be very much appreciated, thanks!
If it helps, I've upgraded the ram myself previously. But that was a few years ago and didn't show any problems when i first installed it.
It is an early 2011 Macbook Pro with OS X Mavericks 10.9.4
The split screen issue looks like this:
Apologies for the rotated image I don't know how to rotate it on the site.
It also appears identical to the one shown here, three posts down: https://discussions.apple.com/message/15920113
The problem report of the first event is shown here:
Anonymous UUID: 81B375DF-0157-0360-53AE-96FF39CBAC4B
Wed Jul 2 01:41:51 2014
Machine-check capabilities: 0x0000000000000c09
family: 6 model: 42 stepping: 7 microcode: 40
signature: 0x206a7
Intel(R) Core(TM) i7-2635QM CPU @ 2.00GHz
9 error-reporting banks
Processor 0: IA32_MCG_STATUS: 0x0000000000000004
IA32_MC3_STATUS(0x40d): 0xbe00000000800400
IA32_MC3_ADDR(0x40e): 0x00003f7f8f9ccb5f
IA32_MC3_MISC(0x40f): 0x000000000003ffff
Processor 1: IA32_MCG_STATUS: 0x0000000000000005
IA32_MC3_STATUS(0x40d): 0xbe00000000800400
IA32_MC3_ADDR(0x40e): 0x00003f7f8f9ccb5f
IA32_MC3_MISC(0x40f): 0x000000000003ffff
Processor 2: IA32_MCG_STATUS: 0x0000000000000004
IA32_MC3_STATUS(0x40d): 0xbe00000000800400
IA32_MC3_ADDR(0x40e): 0x00003f7f910c5aa8
IA32_MC3_MISC(0x40f): 0x000000000003ffff
Processor 3: IA32_MCG_STATUS: 0x0000000000000005
IA32_MC3_STATUS(0x40d): 0xbe00000000800400
IA32_MC3_ADDR(0x40e): 0x00003f7f910c5aa8
IA32_MC3_MISC(0x40f): 0x000000000003ffff
Processor 4: IA32_MCG_STATUS: 0x0000000000000004
IA32_MC3_STATUS(0x40d): 0xbe00000000800400
IA32_MC3_ADDR(0x40e): 0x00003f7f90a09905
IA32_MC3_MISC(0x40f): 0x000000000003ffff
Processor 5: IA32_MCG_STATUS: 0x0000000000000005
IA32_MC3_STATUS(0x40d): 0xbe00000000800400
IA32_MC3_ADDR(0x40e): 0x00003f7f90a09905
IA32_MC3_MISC(0x40f): 0x000000000003ffff
panic(cpu 4 caller 0xffffff800ecdcad9): "Machine Check at 0xffffff7f90a09905, registers:\n" "CR0: 0x000000008001003b, CR2: 0x00000001089ba000, CR3: 0x0000000011ba1000, CR4: 0x00000000000606e0\n" "RAX: 0xffffff8119485100, RBX: 0xffffff8021c65c00, RCX: 0x0000000000002833, RDX: 0xffffff8021c74c80\n" "RSP: 0xffffff811ab1bed0, RBP: 0xffffff811ab1bf10, RSI: 0x000000001dcd64ff, RDI: 0xffffff8021c65c00\n" "R8: 0xffffff8111bfd078, R9: 0x0000000000000000, R10: 0xffffff811ab1be20, R11: 0x0000000000000200\n" "R12: 0x00000000ffffffff, R13: 0x00000000ffffffff, R14: 0x0000000000000000, R15: 0x0000000000400001\n" "RFL: 0x0000000000010246, RIP: 0xffffff7f90a09905, CS: 0x0000000000000008, SS: 0x0000000000000010\n" "Error code: 0x0000000000000000\n"@/SourceCache/xnu/xnu-2422.110.17/osfmk/i386/trap_native.c :168
Backtrace (CPU 4), Frame : Return Address
0xffffff8111bede80 : 0xffffff800ec22f79
0xffffff8111bedf00 : 0xffffff800ecdcad9
0xffffff8111bee060 : 0xffffff800ecf3fef
0xffffff811ab1bf10 : 0xffffff7f90a0c023
0xffffff811ab1bf30 : 0xffffff800f0af292
0xffffff811ab1bf80 : 0xffffff800f0af367
0xffffff811ab1bfb0 : 0xffffff800ecd7417
Kernel Extensions in backtrace:
com.apple.driver.AppleAHCIPort(3.0.5)[7F56F309-28C2-342A-82C0-3908C164EBCC]@0xf fffff7f90a02000->0xffffff7f90a1bfff
dependency: com.apple.iokit.IOAHCIFamily(2.6.5)[AB2D7D6A-B59B-3039-AE08-CBCC38208911]@0xfff fff7f8fd72000
dependency: com.apple.iokit.IOPCIFamily(2.9)[4662B11D-2ECA-315D-875C-618C97CDAB2A]@0xffffff 7f8f27c000
BSD process name corresponding to current thread: kernel_task
Mac OS version:
13E28
Kernel version:
Darwin Kernel Version 13.3.0: Tue Jun 3 21:27:35 PDT 2014; root:xnu-2422.110.17~1/RELEASE_X86_64
Kernel UUID: BBFADD17-672B-35A2-9B7F-E4B12213E4B8
Kernel slide: 0x000000000ea00000
Kernel text base: 0xffffff800ec00000
System model name: MacBookPro8,2 (Mac-94245A3940C91C80)
System uptime in nanoseconds: 117766305248
last loaded kext at 88599052330: com.tuxera.filesystems.tufsfs.fusefs_txantfs 2010.12.28 (addr 0xffffff7f914ef000, size 94208)
loaded kexts:
com.tuxera.filesystems.tufsfs.fusefs_txantfs 2010.12.28
com.orderedbytes.driver.ControllerMateFamily 4.4.3
com.orderedbytes.driver.CMUSBDevices 4.4.3
com.apple.driver.AppleHWSensor 1.9.5d0
com.apple.driver.AudioAUUC 1.60
com.apple.macos.driver.AppleUSBEthernetHost 7.0
com.apple.driver.AppleTyMCEDriver 1.0.2d2
com.apple.driver.AGPM 100.14.28
com.apple.iokit.IOBluetoothSerialManager 4.2.6f1
com.apple.filesystems.autofs 3.0
com.apple.driver.AppleMikeyHIDDriver 124
com.apple.driver.AppleHDAHardwareConfigDriver 2.6.3f4
com.apple.driver.AppleHDA 2.6.3f4
com.apple.iokit.IOUserEthernet 1.0.0d1
com.apple.Dont_Steal_Mac_OS_X 7.0.0
com.apple.driver.AppleUpstreamUserClient 3.5.13
com.apple.driver.AppleHWAccess 1
com.apple.iokit.IOBluetoothUSBDFU 4.2.6f1
com.apple.driver.SMCMotionSensor 3.0.4d1
com.apple.driver.AppleLPC 1.7.0
com.apple.driver.ApplePolicyControl 3.6.22
com.apple.kext.AMDFramebuffer 1.2.4
com.apple.driver.AppleIntelMCEReporter 104
com.apple.iokit.BroadcomBluetoothHostControllerUSBTransport 4.2.6f1
com.apple.driver.AppleMikeyDriver 2.6.3f4
com.apple.driver.AppleBacklight 170.3.5
com.apple.driver.AppleMCCSControl 1.2.5
com.apple.AMDRadeonX3000 1.2.4
com.apple.driver.AppleSMCLMU 2.0.4d1
com.apple.driver.AppleMuxControl 3.6.22
com.apple.driver.AppleSMCPDRC 1.0.0
com.apple.driver.ACPI_SMC_PlatformPlugin 1.0.0
com.apple.kext.AMD6000Controller 1.2.4
com.apple.driver.AppleIntelHD3000Graphics 8.2.4
com.apple.driver.AppleIntelSNBGraphicsFB 8.2.4
com.apple.driver.AppleThunderboltIP 1.1.2
com.apple.driver.AppleUSBTCButtons 240.2
com.apple.driver.AppleUSBTCKeyEventDriver 240.2
com.apple.driver.AppleUSBTCKeyboard 240.2
com.apple.driver.AppleIRController 325.7
com.apple.driver.AppleFileSystemDriver 3.0.1
com.apple.AppleFSCompression.AppleFSCompressionTypeDataless 1.0.0d1
com.apple.AppleFSCompression.AppleFSCompressionTypeLZVN 1.0.0d1
com.apple.AppleFSCompression.AppleFSCompressionTypeZlib 1.0.0d1
com.apple.BootCache 35
com.apple.iokit.SCSITaskUserClient 3.6.6
com.apple.driver.XsanFilter 404
com.apple.iokit.IOAHCIBlockStorage 2.6.0
com.apple.driver.AppleUSBHub 683.4.0
com.apple.driver.AppleSDXC 1.5.2
com.apple.iokit.AppleBCM5701Ethernet 3.8.1b2
com.apple.driver.AirPort.Brcm4331 700.20.22
com.apple.driver.AppleFWOHCI 5.0.2
com.apple.driver.AppleAHCIPort 3.0.5
com.apple.driver.AppleUSBEHCI 660.4.0
com.apple.driver.AppleUSBUHCI 656.4.1
com.apple.driver.AppleSmartBatteryManager 161.0.0
com.apple.driver.AppleHPET 1.8
com.apple.driver.AppleACPIButtons 2.0
com.apple.driver.AppleRTC 2.0
com.apple.driver.AppleSMBIOS 2.1
com.apple.driver.AppleACPIEC 2.0
com.apple.driver.AppleAPIC 1.7
com.apple.driver.AppleIntelCPUPowerManagementClient 217.92.1
com.apple.nke.applicationfirewall 153
com.apple.security.quarantine 3
com.apple.driver.AppleIntelCPUPowerManagement 217.92.1
com.apple.iokit.IOSerialFamily 10.0.7
com.apple.kext.triggers 1.0
com.apple.driver.DspFuncLib 2.6.3f4
com.apple.vecLib.kext 1.0.0
com.apple.iokit.IOAudioFamily 1.9.7fc2
com.apple.kext.OSvKernDSPLib 1.14
com.apple.iokit.IOSurface 91.1
com.apple.iokit.IOBluetoothFamily 4.2.6f1
com.apple.iokit.IOBluetoothHostControllerUSBTransport 4.2.6f1
com.apple.driver.AppleHDAController 2.6.3f4
com.apple.iokit.IOHDAFamily 2.6.3f4
com.apple.driver.AppleSMBusController 1.0.12d1
com.apple.iokit.IOAcceleratorFamily 98.22
com.apple.iokit.IOFireWireIP 2.2.6
com.apple.driver.AppleBacklightExpert 1.0.4
com.apple.driver.AppleGraphicsControl 3.6.22
com.apple.driver.AppleSMBusPCI 1.0.12d1
com.apple.driver.AppleSMC 3.1.8
com.apple.driver.IOPlatformPluginLegacy 1.0.0
com.apple.driver.IOPlatformPluginFamily 5.7.1d6
com.apple.kext.AMDSupport 1.2.4
com.apple.AppleGraphicsDeviceControl 3.6.22
com.apple.iokit.IONDRVSupport 2.4.1
com.apple.iokit.IOGraphicsFamily 2.4.1
com.apple.driver.AppleThunderboltEDMSink 2.1.3
com.apple.driver.AppleThunderboltDPOutAdapter 3.1.7
com.apple.driver.AppleThunderboltDPInAdapter 3.1.7
com.apple.driver.AppleThunderboltDPAdapterFamily 3.1.7
com.apple.driver.AppleThunderboltPCIDownAdapter 1.4.5
com.apple.driver.AppleUSBMultitouch 240.9
com.apple.iokit.IOUSBHIDDriver 660.4.0
com.apple.driver.AppleUSBMergeNub 650.4.0
com.apple.driver.AppleUSBComposite 656.4.1
com.apple.iokit.IOSCSIMultimediaCommandsDevice 3.6.6
com.apple.iokit.IOBDStorageFamily 1.7
com.apple.iokit.IODVDStorageFamily 1.7.1
com.apple.iokit.IOCDStorageFamily 1.7.1
com.apple.iokit.IOAHCISerialATAPI 2.6.1
com.apple.iokit.IOSCSIArchitectureModelFamily 3.6.6
com.apple.driver.AppleThunderboltNHI 2.0.1
com.apple.iokit.IOThunderboltFamily 3.3.1
com.apple.iokit.IOUSBUserClient 660.4.2
com.apple.iokit.IOEthernetAVBController 1.0.3b4
com.apple.driver.mDNSOffloadUserClient 1.0.1b5
com.apple.iokit.IO80211Family 640.36
com.apple.iokit.IONetworkingFamily 3.2
com.apple.iokit.IOFireWireFamily 4.5.5
com.apple.iokit.IOAHCIFamily 2.6.5
com.apple.iokit.IOUSBFamily 683.4.0
com.apple.driver.AppleEFINVRAM 2.0
com.apple.driver.AppleEFIRuntime 2.0
com.apple.iokit.IOHIDFamily 2.0.0
com.apple.iokit.IOSMBusFamily 1.1
com.apple.security.sandbox 278.11.1
com.apple.kext.AppleMatch 1.0.0d1
com.apple.security.TMSafetyNet 7
com.apple.driver.AppleKeyStore 2
com.apple.driver.DiskImages 371.1
com.apple.iokit.IOStorageFamily 1.9
com.apple.iokit.IOReportFamily 23
com.apple.driver.AppleFDEKeyStore 28.30
com.apple.driver.AppleACPIPlatform 2.0
com.apple.iokit.IOPCIFamily 2.9
com.apple.iokit.IOACPIFamily 1.4
com.apple.kec.pthread 1
com.apple.kec.corecrypto 1.0
Model: MacBookPro8,2, BootROM MBP81.0047.B27, 4 processors, Intel Core i7, 2 GHz, 8 GB, SMC 1.69f4
Graphics: Intel HD Graphics 3000, Intel HD Graphics 3000, Built-In, 512 MB
Graphics: AMD Radeon HD 6490M, AMD Radeon HD 6490M, PCIe, 256 MB
Memory Module: BANK 0/DIMM0, 4 GB, DDR3, 1333 MHz, 0x014F, 0x4A4D313333334B534E2D3447202020202020
Memory Module: BANK 1/DIMM0, 4 GB, DDR3, 1333 MHz, 0x014F, 0x4A4D313333334B534E2D3447202020202020
AirPort: spairport_wireless_card_type_airport_extreme (0x14E4, 0xD6), Broadcom BCM43xx 1.0 (5.106.98.100.22)
Bluetooth: Version 4.2.6f1 14216, 3 services, 15 devices, 1 incoming serial ports
Serial ATA Device: TOSHIBA MK5065GSXF, 500.11 GB
Serial ATA Device: MATSHITADVD-R UJ-898
USB Device: FaceTime HD Camera (Built-in)
USB Device: Hub
USB Device: Apple Internal Keyboard / Trackpad
USB Device: BRCM2070 Hub
USB Device: Bluetooth USB Host Controller
USB Device: Hub
USB Device: IR Receiver
Thunderbolt Bus: MacBook Pro, Apple Inc., 22.1

You might try removing these 3rd party applications and see if there is an improvement.
com.tuxera.filesystems.tufsfs.fusefs_txantfs 2010.12.28
com.orderedbytes.driver.ControllerMateFamily 4.4.3
com.orderedbytes.driver.CMUSBDevices 4.4.3

Red blue screen

Hello,
Recently while working on my laptop and using a quite large tv as a second monitor, I suddenly get this plain blue screen on the laptop and a plain red screen on the tv, no text on either one. They then glitch, and for lack of a better word, the displays begin glitching into switched colors(you can see the desktop behind this acting like an old tube tv with the vertical gone crazy) until the tv had a plain red screen on the laptop and a blue screen on the tv. This hangs for a couple seconds until I shut it off because it hurts my eyes and the computer reboots and the computer tells me that it is checking a disk for 'consistency'. It appears to fix a few errors and then boots regularly. Should I be slightly concerned, or should I run away screaming?

Stop errors (also sometimes called blue screen or black screen errors) can occur if a serious problem causes Windows 7 to shut down or restart unexpectedly. You might see a message that says, "Windows has been shut down to prevent damage to your computer."
These errors can be caused by both hardware and software issues, and it can be difficult to troubleshoot the problem. The following tools and methods can often help get Windows up and running again.
http://windows.microsoft.com/en-us/windows7/resolving-stop-blue-screen-errors-in-windows-7
Cheers
Mohammed Hamed

Red canvas screen?

Similar Messages

Maybe you are looking for