Red cell in the "Time" column of SM50 page
Hi all,
I find that there is a red cell in the "Time" column of SM50 page. Would anyone can tell me why it happen?
Many thanks!
Best regards,
Marcus
Hey!
How Niten said, it just shows you that this process is running for a long time. This can have an impact on the hole system because all the time resources like memory, cpu-time and a process is needed.
How to handle depends.If you see this red field the process is still running. If you have a dialog process there is a limit parameter. I think a normal value would therefore be 600 seconds and the process than is running twice the time. Maybe shorter.
If it is a batch job (backround) it can run for days, I think there is no limit excepting a shut down of the system. I think basis admins don't like to see running such a process for hours or days because of the resource consumption.
So, for what do you need this process? It is a loading process? Normally loading processes run such a long time but could also be another process. If it is loading maybe it is possible to load a smaller amount of data or maybe a performance tuning of the loading process is possible. Tell us more abount the process and what it is needed for.
Best regards,
Peter
Similar Messages
-
How do I get it so after initially importing my video the line above the time line will be green instead of red. It stays red until after I render the whole clip. I am importing my video clips from my camcorder. How do you determine the correct project settings if that is the issue?
Thanksfreedog69
How do I get it so after initially importing my video the line above the
time line will be green instead of red.
Not possible as worded. If you have the correct project preset, there will
be no colored line over this Timeline content.
If you do not have the correct project preset, there will be a red line
over this Timeline content.
What version of Premiere Elements are you using and on what computer
operating system is it running? APE 8 Windows XP 3GB of ram Pentium Dual core
Proc 2.41 Ghz
If you are talking "red" line, then you must be working with a version of
Premiere Elements earlier than 11. Assuming that....
If your project preset matches the properties of your source media, then,
when you bring one of those files to the Timeline, you will get no colored
line over the Timeline. But, after that, after you edit that content, a red
line will appear. That is when you render the Timeline content to turn the
line green.Thereafter, that original content will never revert to the no
colored line status as you work through editing that project. It will just go
through the red green color indicator system.
No colored line and green = the program telling you that you now have the
best possible preview of the Timeline content when viewing it in the Edit
Mode monitor playback. Red line = the program telling you that you do not
have the best possible preview of the Timeline content and, if you want that,
then you can press the Enter key of the computer main keyboard to make that
happen.
What are the properites of your source media... Canon HF 10 camera and
Panasonic HV-720
video and audio compression
frame size
frame size
interlaced or progressive
file extension
pixel aspect ratio
General Panasonic HV-720
ID : 1 (0x1)
Complete name : K:\Busters_Tap\New
Matches-CamB\f0069412.m2ts
Format : BDAV
Format/Info : Blu-ray Video
File size : 2.00 GiB
Duration : 58mn 59s
Overall bit rate : 4 854 Kbps
Maximum Overall bit rate : 18.0 Mbps
Video
ID : 4113 (0x1011)
Menu ID : 1 (0x1)
Format : AVC
Format/Info : Advanced Video Codec
Format profile : [email protected] (mailto:[email protected])
Format settings, CABAC : Yes
Format settings, ReFrames : 2 frames
Format settings, GOP : M=1, N=30
Codec ID : 27
Duration : 58mn 59s
Bit rate mode : Variable
Bit rate : 4 267 Kbps
Maximum bit rate : 16.8 Mbps
Width : 1 920 pixels
Height : 1 080 pixels
Display aspect ratio : 16:9
Frame rate : 29.970 fps
Color space : YUV
Chroma subsampling : 4:2:0
Bit depth : 8 bits
Scan type : Interlaced
Scan order : Top Field First
Bits/(Pixel*Frame) : 0.069
Stream size : 1.76 GiB (88%)
Audio
ID : 4352 (0x1100)
Menu ID : 1 (0x1)
Format : AC-3
Format/Info : Audio Coding 3
Mode extension : CM (complete main)
Codec ID : 129
Duration : 58mn 59s
Bit rate mode : Constant
Bit rate : 384 Kbps
Channel(s) : 2 channels
Channel positions : Front: L R
Sampling rate : 48.0 KHz
Bit depth : 16 bits
Compression mode : Lossy
Delay relative to video : -558ms
Stream size : 162 MiB (8%)
Text
ID : 4608 (0x1200)
Menu ID : 1 (0x1)
Format : PGS
Codec ID : 144
Duration : 58mn 58s
Delay relative to video : 34ms
General- Canon HF 10
ID : 0 (0x0)
Complete name : K:\Busters_Tap\New Matches
CAM-A\00001.MTS
Format : BDAV
Format/Info : Blu-ray Video
File size : 1.90 GiB
Duration : 49mn 5s
Overall bit rate : 5 551 Kbps
Maximum Overall bit rate : 13.7 Mbps
Video
ID : 4113 (0x1011)
Menu ID : 1 (0x1)
Format : AVC
Format/Info : Advanced Video Codec
Format profile : [email protected] (mailto:[email protected])
Format settings, CABAC : Yes
Format settings, ReFrames : 2 frames
Codec ID : 27
Duration : 49mn 5s
Bit rate mode : Variable
Bit rate : 5 066 Kbps
Maximum bit rate : 12.0 Mbps
Width : 1 440 pixels
Height : 1 080 pixels
Display aspect ratio : 16:9
Frame rate : 29.970 fps
Color space : YUV
Chroma subsampling : 4:2:0
Bit depth : 8 bits
Scan type : Interlaced
Scan order : Top Field First
Bits/(Pixel*Frame) : 0.109
Stream size : 1.74 GiB (91%)
Audio
ID : 4352 (0x1100)
Menu ID : 1 (0x1)
Format : AC-3
Format/Info : Audio Coding 3
Mode extension : CM (complete main)
Codec ID : 129
Duration : 49mn 5s
Bit rate mode : Constant
Bit rate : 256 Kbps
Channel(s) : 2 channels
Channel positions : Front: L R
Sampling rate : 48.0 KHz
Bit depth : 16 bits
Compression mode : Lossy
Delay relative to video : -66ms
Stream size : 89.9 MiB (5%)
What brand/model/settings camera provided you will the source media for the
Premiere Elements 10 project. Canon HF 10 and Panasonic HV-720
In a message dated 1/9/2014 5:00:15 P.M. Eastern Standard Time,
[email protected] writes:
Re: Red line above the time line
created by A.T. Romano (http://forums.adobe.com/people/A.T.+Romano) in
Premiere Elements - View the full discussion
(http://forums.adobe.com/message/5998225#5998225) -
Hello:
How do I enable the WHO columns in OAF pages in R 12.1.3 ?
Thanks - YeshHi,
Please post your question in "Technology - OA Framework" forum for a better/faster response.
Technology - OA Framework
OA Framework
Thanks,
Hussein -
since the last update a few days ago of firefox, the time has been 25 to 35 seconds to enter bookmarks or even the time it takes to page down when it used to take a few seconds. can you tell me why it taking so long since the update on firefox. may another update is in order.
I have now done pretty much every suggestion that even vaguely applies in the various helpful link provided. Thanks for the ongoing help. =)
I have managed to get FireFox's start-up memory usage down to about 100,000K, however it appears that memory usage keeps creeping up the longer FireFox is open. (It seems to top out around 500,000K.) And I'm not talking open for many hours or days - but rather for minutes and possibly up to a couple hours. (Based on how long I've been fiddling with all this so far.)
On the plus side, it does not appear GreaseMonkey is the culprit since with it active or disabled this memory creep still occurs. Although having GreaseMonkey enabled definitely increases the rate of memory creep. Though once it has creeped up to 150,000+K, disabling GM does not make it drop back down to the starting 100,000K.
I should point out I run a MacBook Pro and use Bootcamp to partition the hard drive and run it as a Windows 7 PC about half the time. I am running it literally as a PC or, alternately, as a Mac depending on which hard drive I choose to load. (I'm not "windowing" it.) This problem exists regardless of whether I am using the PC or the Mac. These repairs have been made currently on the PC side, and I will attempt them all again on the Mac side. I find it odd that this enormous memory drain has occurred on 3 different computers at the same time. (The two "halves" of my home laptop as well as the PC at my work place.) -
Is the time column in VA05 the time the sales order created?
i have added a time column in VA05. May i know whether it is the time the sales order is created? How do i know if it it the created time? Need to know the sales order created time, for example at 7:00. Thank you
Hi
Yes this is the order creation date. You can cross check by seeing the time by checking the entry in table (VBAK-EZERT) by passing the VBAK-VBELN as the order number.
Thanks
Indranil -
Table Interface : Merge cells in the same column
I want to use the Table Interface to accomplish this...
I need to merge cells that are to the top/bottom of eachother. So, the 2 cells have the same InfoObject. They are 2 different values and i want them to appear in the same cell... for example..
A regular table returns:
STATUS
¯¯¯¯¯¯¯¯¯
OPEN
CLOSED
I want it to be displayed like:
STATUS
¯¯¯¯¯¯¯¯¯
OPEN
CLOSED
The vertical lines on the right should be lined up but i cant get it to format. Anyway, how can this be accomplished?
Thanks.We have data object which is a very long text. Much longer than the 60 char limit. So, we're thinking of breaking the text up into 60 char chunks. And then put each chuck beneath one another. But we need the texts to look like they're all in the same cell.
I first thought of manipulating the borders using CSS styles. But I couln't figure out how to tell if I've reached the last line of the text. (I was trying to use I_Y to navigate through the column.)
Second thought, merge the cells. This would be more efficient.
Thanks. -
Im getting a red sos where the signal indicator should be all the time! even in places where i used to have full service! is my phone broken??
Solved!
Go to Solution.Sorry to hear about the frustration! If you have a red X like you're having then you may have a problem with one of five things (generally): 1) SIM card is dying; 2) System software on phone is messed up; 3) There is something physically wrong with the phone; 4) Your service provider is having a problem with their service (towers, base stations, certain SIM cards are having problems); or 5) Your service provider is not having a general problem but a specific problem that applies to your account only. Before contacting your service provider, you can additionally try pulling the SIM card and ensuring that the contacts are clean. If that's OK, then try your SIM card in another phone...is the signal OK in another phone? Finally, if you are comfortable with it...reinstall the system software for your phone. You should be able to go to your service provider's web site and get the handheld software for your phone. Even if you have the latest software, you can still reinstall it to fix any system glitches. If those steps don't help, it's either the phone or your service provider.
Hope that helps!
"Once you label me you negate me." Soren Kierkegaard
Tim J
Colorado Springs, CO -
The date in the Time column in Console is stuck.
The other day I was checking console to try and figure out some issues I was having and noticed that the date is stuck on Oct/5/08. The time changes and updates properly but the date has been Oct/5/08 for the past 10 days. The proper date is set in the Date & Time area of System Preferences, so what gives?
Message was edited by: RiffamortisWhat date are you looking at?
If you're talking about console.app then the only timestamps I can think you're seeing are related to when the relevant log message was written (all log messages are timestamped, so you may be reading messages from 10/5/08).
Maybe the issue is that you're not getting any newer log messages? -
Setting up my Iphone I must have overlooked something the result of which is time and other information appearing in some foreign, I think Asian, script of some kind. The vast majority of information, App names, etc, are displaying in English as needed, but the time and numbers of some things are in this other language. SOS.
Check Settings>General>International>Region Format and make sure this is set to the correct country/region.
-
Activate only one cell in the table column
Hi experts,
I am facing a problem where in i need to allow only one cell for input in the complete table.
Suppose i have 4 rows and 5 columns, and i want to allow only one field for input in the complete table based on a condition.
Can someone help me how to achieve this?
Regards,
Madhuhi madhu,
what you ca do is, have an extra attribute in the node that is bound o the table, this attribute must be bound to the read only property of the cell. so according to your condition fill the attribute with 'X' or no value so that it will be in read only or editable mode.
---regards,
alex b justin -
Getting a error with red mark in the measures columns..
Hello Gurus,
When we try to run the report in analysis, In the columns its shows red mark like this..
Please anyone can help on this issue..?
Thanks
PSNHi
this issue is not related to analysis for office in general
its a GDI+ painting error, thrown by the .net framework.
Is your windows system on the latest patches??
Regards
Thorsten -
How to cell register the date/time when you put a value in another cell
Hello guys!
How do I get a cell (eg A2) tell the date and time when I put a value in another cell (eg A1) in Numbers?
For example, I want to register a cell to read my electricity meter.
I write in cell A1: 45809. When placing this value in A1, I want to appear (on A2) the date and time when I did that record automatically. Is it possible?
I hope you understood the question!
Thank you in advance to those who try to help.There is not automatic time stamping of on entry of a time. One suggestion I've seen has a cell that has the current date and time. Everytime you cahnge any cell that cell will update. You can then copy that cell and paste the value into your date/time cell adjacent to the meter reading:
Create a new, plain table:
Now in cell A1 enter the formula "=now()" short hand for this is:
A1=now()
now resize the table so it is a table that is 1 cell by 1 cell by selecting any cell, then dragging the table size control in the bottom right corrner towards cell A1:
It should look like this when you have completed this task:
Now create another new, plain table and enter "Date" for cell A1, and "Meter Reading" for B1:
Now you can enter a meter reading (I entered "45671"). Now select the CELL that has current date and time from the first table at the very top, and copy:
Now select the cell in the date column where you want to put the current date and paste values by using the menu item "Edit > Paste Value": -
Edit JTable Date Cell, press Enter, the Time Cell changes to GMT time!
Has anyone seen this strange behavior? I try to edit a Date Cell in JTable (orig. value 10/02/2000) and change it to (10/03/2000), I press Enter. But, the value of my Time Cell in the next column, same row which I never edited (orig. value 00:05:00) changes to approximately my system time in GMT (16:28:48).
This is an excerpt from my TableModel which get called from setValueAt():1734 javax.swing.JTable, JTable.java. In the code below, the debug statement prints out:
row, col = 0,0
Value in SubTableModel = 10-02-2000 16:28:48
Value should be "10-02-2000" since I did not edit the time cell at all. And why is row and col both zero?
public void setValueAt(Object value, int row, int col) {
try {
((ITableCellAdapter)adapters.get(col)).setData(getRow(row),col);
System.out.println("row, col = " + row + col);
System.out.println("Value in SubTableModel = " + value.toString());
((ITableCellAdapter)adapters.get(col)).setValue(value);
catch (PropertyVetoException badSet) {
System.out.println("could not set value");
fireTableCellUpdated(row,col);
How can I force it to set the date cell's new value only and leave the time cell alone?
I've also seen that sometimes my date entry gets lost, the old value still showing, what am I doing wrong? I've seen a bunch of bug parade listings about terminating edits within a JTable being buggy, is this related?
Any help on this is most appreciated!Did you find the solution to yuor problem?
Has anyone seen this strange behavior? I try to edit
a Date Cell in JTable (orig. value 10/02/2000) and
change it to (10/03/2000), I press Enter. But, the
value of my Time Cell in the next column, same row
which I never edited (orig. value 00:05:00) changes to
approximately my system time in GMT (16:28:48).
This is an excerpt from my TableModel which get called
from setValueAt():1734 javax.swing.JTable,
JTable.java. In the code below, the debug statement
prints out:
row, col = 0,0
Value in SubTableModel = 10-02-2000 16:28:48
Value should be "10-02-2000" since I did not edit the
time cell at all. And why is row and col both zero?
public void setValueAt(Object value, int row, int
nt col) {
try {
((ITableCellAdapter)adapters.get(col)).setData(getRow(
ow),col);
System.out.println("row, col = " + row +
+ row + col);
System.out.println("Value in SubTableModel = "
del = " + value.toString());
((ITableCellAdapter)adapters.get(col)).setValue(value)
catch (PropertyVetoException badSet) {
System.out.println("could not set value");
fireTableCellUpdated(row,col);
How can I force it to set the date cell's new value
only and leave the time cell alone?
I've also seen that sometimes my date entry gets lost,
the old value still showing, what am I doing wrong?
I've seen a bunch of bug parade listings about
terminating edits within a JTable being buggy, is
this related?
Any help on this is most appreciated! -
How to delete the date and time column from a waveform spreasheet file
after acquiring a signal through the DAQ i am writing it in a spreadsheet. but for further post processing of the data the date and the time column are unneccessary. is there some way to format the file in labview so that those columns are removed. the DAQmx read gives as output a 1 d array. so i could not find a way to select only the Y column
If you are getting a 1D array from the DAQmx Read, then you don't have any date/time information to write and if you are using the Write to Spreadsheet File, there should be no way you can have the date/time information in the file. Whatever you hjave programed to put the date/time into the file, don't do it.
p.s. You may not think you need timing information but for a lot of post-processing, it is essential to have. If it's in the file, you can always ignore when you read it and if you later find out it's necessary, it will already be there. -
FROM AI START VI TO FORMAT AND APPEND VI TO CONCATENATE STRINGS,SECOND INPUT IS TAB,THEN EVEY OTHER ONE IS TAB. THIRD AND FIFTH INPUT IS ATTACHED TO GET DATE/ TIME VI, THEN END OF LINE, THEN CHANNEL 0; TAB; CHANNEL 1;TAB, AND SO ON THROUGH CHANNEL 7. THEN THE LAST INPUT IS END OF LINE. ON THE SPREADSHEET I RECIEVE THE SCAN RATE, THEN THE DATE ,THEN THE TIME; ALL ON THE FIRST ROW. THE NEXT ROW HAS THE COLUMN LABLES, AND DATA GOES TO THE CORRECT COLUMN. BUT NO TIME STAMP COLUMN. I WOULD LIKE IT TO BE IN COLUMN "A" EVEN WITH THE FIRST ROW OF DATA. EX." 10:01:01 200 300 400
10:01:03 200 300 400
THANK YOU
FOR YOUR HELP, JOE BOB CRAINI think the best way is to generate an array of time values to send to your spreadsheet BEFORE channel 0 data.
To generate the array you can use Ramp Pattern.vi from 0 to 'Actual Scan Rate' (from AI Start) * number of scans performed.
That way in your spreadsheet you will have the first line same as now, next the columns with time(secs), channel 0, channel 1... channel 7.
If you need the time column with date and time string, you can use Get Date/Time in Seconds.vi when you begin acquisition, then sum the seconds obtained to the array calculated as above and next use Format Date/Time String.vi to obtain the time stamp you need, next build array of time stamps and sent to your spreadsheet.
Hope this helps
Roberto
Proud to use LW/CVI from 3.1 on.
My contributions to the Developer Zone Community
If I have helped you, why not giving me a kudos?
Maybe you are looking for
-
I believe I had some kind of virus attack. I got everything cleaned up. (I HOPE) In the process of cleaning the virus, I unintalled Firefox because it wouldn't open. Kept getting the error message that Firefox was already open and I had to close out
-
Hi: I have a newbie question: Do I gain anything by going to an HDV camera, if I only plan to output to standard DVD? Is the extra resolution an advantage, in terms of having 'more information' to work with, even if the final output will be standard
-
Interaction Center Sales with ERP Sales Order
We are in the process of upgrading from CRM 4.0 sp 6 to CRM 2007. We have been using the Web IC and Mobile sales for the last 4 years. In our original CRM 4.0 implementation (which was developed by SAP) we were using the CRM Web IC to create orders
-
Hi friends, I have created one program with alv list, but i am unable to add one header and footer, also i have to add one logo to the program. Plese some one tell me a easy procedure to add a header, footer and also a logo. If you can
-
Airplay Intermittently Not Connecting Using iTunes
Have a situation. My iTuness library is stored on my iMac, and I am using a Time Capsule for my wi fi network. I have three Airport Expresses, and three Apple TV 2's, that I stream music too. On occasion, when I try to engage Airplay either from my