Red color problems in LR 4.1

Have LR 4.1, CS6, Windows 7, use AdobeRGB1998, PSD, color managed with Eye one display 2, RAW images. Rarely take photos of red subjects, so have not seen this problem before now......wedding with 10 bridesmaids in "coral" dresses has uncovered a problem. Am seeing difference in red colors within LR, from the Library to the Develop mode/views they are different.. When saving PSD to the web as sRBG, colors of red are garrish, not at all true to the original PSD doc. Sending jpegs to Walgreens for my family shows very wrong colors, ranging from pink to orange to too-red. Anyone else having these problems?

Go into your develop panel and softproof one of these images for sRGB. Turn on the monitor and profile gamut warning. My guess is that the red color is outside both your monitor and sRGB. This will give rise to very large color shifts easily especially in highly saturated colors. The only thing you can do about it is to bring them back into gamut. There are many tutorials on the web on how to do this. One example is here: http://tv.adobe.com/watch/whats-new-in-lightroom-4/soft-proofing-images
Or this excellent one from Andrew Rodney: http://digitaldog.net/files/LR4_softproof2.mov

Similar Messages

Printing problem - HP Officejet Pro 8500 Wireless All-in-One Printer, Red color fads on 4th copy

I have an HP HP Officejet Pro 8500 Wireless All-in-One Printer, and am trying to print 75 copies of a program for our event. After the first 5-6 pages the RED in my program starts to turn magenta. I have brand new HP ink, and am printing on HP Color Injet Paper. I have renectly replaced the Black/Yellow printhead (at least 6 months ago). At first when I cleaned the printheads, I could print 2 or 3 pages showing my RED color. Then turns back to magenta. When I received the test patterns after cleaning the print heads they are all perfect with no lines.
What is going on and how can I fix it?
This question was solved.
View Solution.

Hi TM1997,
I understand you have an Officejet 8500 Wireless that is not printing red properly, it keeps turning to magenta. I'm sorry to hear this, but I will definitely do my best to help you!
As I'm sure you saw, when replacing the black and yellow printhead, that there are two printheads in the Officejet 8500 and the second one controls the magenta and cyan. I would suggest that you first have a look through this Troubleshooting Print Quality Issues document. You can also manually clean your printhead with the steps in this 'The Following Printhead Appears to be Missing or Damaged' or 'The Following Printhead has a Problem... document.
Hope this helps, have a great day!!
Please click “Accept as Solution ” if you feel my post resolved your issue, as it will help others find the solution faster
Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
**MissTeriLynn**
I work on behalf of HP

When i waned to buy and finished filling all the (*), i clicked on conifirm membership they worte this in a red color: There was a problem processing your order, please contact our Customer Service team for assistance.Middle East

when i waned to buy and finished filling all the (*), i clicked on conifirm membership they worte this in a red color:
There was a problem processing your order, please contact our Customer Service team for assistance.Middle East & North AfricaBahrain: 80081097Egypt: 08000000447Jordan/Kuwait/Lebanon/Qatar/Yemen: English +44 207 365 0735Jordan/Kuwait/Lebanon/Qatar/Yemen: Arabic/French +44 203 564 4145Oman: 80077173Saudi Arabia: 8008446638Tunisia, Morocco and Algeria: +33 157324642United Arab Emirates: 80004443085Commonthwealth of Independent States (CIS): +44 207 365 0735

Verify that everything about your Adobe ID and your country and your credit card match exactly
Change/Verify Account https://forums.adobe.com/thread/1465499 may help
-http://helpx.adobe.com/x-productkb/policy-pricing/change-country-associated-with-adobe-id. html
-Credit card https://helpx.adobe.com/utilities/credit-card.html
-wrong email https://forums.adobe.com/thread/1446019

Logo overlay problem - red color

I have two logos that I need to put on top of footage on a 16:9 NTSC timeline. One logo is white and read crisp, the other has a red element that pixelates after rendering it. I've imported it as a psd, tif and jpeg and they all act the same. How can I get it to render properly? Thanks.

but I have to take the red almost all the way to a brown color. I have also tried taking the saturation down in FCP using 3-way color corrector. This also creates a brownish red. How can I get a decent red color to represent the corporate logo correctly?
You probably cannot. Converting CMYK or specific ink colors to video is quite nearly impossible. If your client balks at this, ask them how they would represent their red in any medium their logo designers did not anticipate or allow for in their brand specs. Say they were given an opportunity to display their logo on the side of the Goodyear blimp which uses RGB LEDs. The logo, as art would look quite good. But if you are trying to display a copy of a video or television commercial, their "red" would be redefined by the video codec, the blimp's onboard computer's transcoding processor, and the ability of the LEDs to render the colors received from the computer. There will need to be some adjustments to their perception of accuracy.
bogiesan

HP Color Laserjet 2605dn won't print the red color

My HP Color Laserjet 2605dn won't print the red color. It's comes out very light, barely a pink color. It's not the ink cartridge because it's full and I'm having this problem even when I change cartridges.

Hello dp146,
I understand your concerns. Unfortunately, I need to direct you to our Enterprise Business Community Forums.
This will be the right section to troubleshoot this issue.
Good luck.
I worked on behalf of HP.

With DB02 tcode, DB file in red color & status gives No free space

Hi Experts,
With DB02 transaction --> in File tab it is showing all Database files with red color and in the status message gives "No free space in file".
Below is details for your reference
Logical file name used by SQL Server: DEVDATA1
File size in MB: 30.220
SQL Server FILE ID      1
Next file growth(MB)     3.022
Physical file name of the database file     E:\DEV\SAPDATA\DEVDATA1\DEVDATA1.mdf
Allocated MB     30.167
Free on file system (MB)     86.284
Growth Setting     10%
File size limit in MB     no limit
Filegroup name     PRIMARY
Status Message     No free space in file
FLPRIM     X
FILE GROWTH PERCENT     X
Kindly reply what action we have to perform to change the file status.
Regards,
JP

Hello Jigar,
I had the same problem, I found this help file:
http://help.sap.com/erp2005_ehp_03/helpdata/EN/f2/31ad9b810c11d288ec0000e8200722/content.htm
It helped me solve my issue, I increased the size of the files as recommended and their status in DB02 changed to green.
Hope this helps you.
Regards,
Chris

Default Color Problem

I Have a small problem, that I need some help on ...
I need to find the rgb value for the default background colors
of Panels. I used
new Color color = JPanel().getBackground();
int red = color.getRed();
int green = color.getGreen();
int blue = color.getBlue();
int alpha = color.getAlpha();
Result is (r=204,g=204,b=204,a=255) ........
Then When i try to set a Color of panel's background using these values
I get slightly a different color. (same color but the its darker)
new JPanel().setBackground(new Color(204,204,204,255));
Please tell me Why is this ?
I Really need to know the exact values of the default color .......
Thanks
Shirantha.

I have the same problem when using Forte for Java IDE. When I
create a swing component, its color is initially set to 204,204,204.
At least, that is what it shows in the properties table. If you change it to another
color and then later decide that you want it back to default and set RGB
values back to 204,204,204 the slightly darker color that you mentioned comes up!
I tried to trick Forte by editing the source code with an editor. I Compiled
the program and it worked fine. The problem came back as soon as I loaded
the class in the IDE again since the source file was re-built.
Is there anyone who experienced this problem before??

Lightroom 4 color problem

I imported tiff images into Lightroom 4 that were scanned by DigMyPics.com. The color of the images look good on the Windows 7 photo viewer. It looks horrible in Lightroom 4. My monitor is callibrated, the import develope setting is set to "none" , the box is unchecked "apply auto tone adjustments". I think that the windows viewer is showing the accurate color of the scan and LR is not. I don't think DigMyPics would send this awful color. What could the issue be?

monitor NEC 2690 wuxi
eye-one display 2
Original message
From: twenty_one
To: [email protected]
Received: 2/10/2013 12:30:42 PM
Subject: lightroom 4 color problem
Re: lightroom 4 color problem
created by twenty_one in Photoshop Lightroom - View the full discussion
Yes, that certainly looks like a problem with the Lightroom rendering. Skin tones and red in general is clearly off, while Windows Photo Viewer looks good.
I'm almost certain this is a problem with the monitor profile. As troubleshooting, try to set sRGB as monitor profile (or Adobe RGB if your monitor is wide gamut), and see if the difference persists. But try to recalibrate first.
What calibrator and what monitor?
Please note that the Adobe Forums do not accept email attachments. If you want to embed a screen image in your message please visit the thread in the forum to embed the image at http://forums.adobe.com/message/5062403#5062403
Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: http://forums.adobe.com/message/5062403#5062403
To unsubscribe from this thread, please visit the message page at http://forums.adobe.com/message/5062403#5062403. In the Actions box on the right, click the Stop Email Notifications link.
Start a new discussion in Photoshop Lightroom by email or at Adobe Community
For more information about maintaining your forum email notifications please go to http://forums.adobe.com/message/2936746#2936746.

Re: my notebook doesn't display the red color

I think I have the same or a similar problem. I have a AMD A4-6210APU with radeon r3 graphics 1.8 ghz running 64 bit windows 8.1.
Since updating the graphics driver last week I have noticed the colour red seems more pink or purple. This is particularly notable as a lot of my buttons and icons contain scartlet as the principle colour. I only purchased the laptop in August so I doubt this is due to a deteriation of the hardware and therefore seems to be an issue with either the display driver or the display settings.
I have attempted to rectify the problem by resetting the display settings to default.
This partidular model does not appear to have any contrast settings built into the controls, therefore I have no way to adjust the colours manually.

Hello @pittstop,
Welcome to the HP Forums, I hope you enjoy your experience! To help you get the most out of the HP Forums I would like to direct your attention to the HP Forums Guide First Time Here? Learn How to Post and More.
I have read your post on how your notebook doesn't display the red color on the screen, and I would be happy to assist you in this matter!
To ensure that your system is installed with the correct graphics software, I recommend installing the original software and hardware drivers that first came with your computer. This can be done by following the steps in this document on Using Recovery Manager to Restore Software and Drivers (Windows 8). Once the software is installed, please update the chipset and graphics drivers Using HP Support Assistant (Windows 8).
I would also encourage you to post your product number for your computer. Below is a is an HP Support document that will demonstrate how to find your computer's product number. In addition, it will also help if you indicate whether your operating system is 32 or 64 bit. The more information you can provide, the better!
How Do I Find My Model Number or Product Number?
Is the Windows Version on My Computer 32-bit or 64-bit?
Please re-post with the results of your troubleshooting, as well as the requested information above. I look forward to your reply!
Regards
MechPilot
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the right to say “Thanks” for helping!

Adapter engine in red color status

Dear All,
I got pi production system.When i verified componenet in RWB everything is fine except adapter engine.
Adapter Engine in red color status.Error in Are registrations of connections and protocol handler without errors?
I clicked on details.Please see below
13 of 23 connection(s) registered successfully(it was showing 5 of 23 success after i restarted it's showing 13 of 23)
8 of 8 protocol handler registered successfully
Connection registration failed for connection BC_http://sap.com/xi/XI/System on node 106310950 due to: Failed to register connection BC_http://sap.com/xi/XI/System. Reason: com.sap.engine.interfaces.messaging.api.exception.MessagingException: Failed to load messages into Queue BC_http://sap.com/xi/XI/SystemRecv from database. Reason: com.sap.engine.services.dbpool.exceptions.BaseSQLException: ResourceException occurred in method ConnectionFactoryImpl.getConnection(): javax.resource.ResourceException: (Failed in component: dbpool, BC-JAS-TRH) Cannot create connection.
Possible reasons:
1)Maximum allowed connections to DB or EIS is reached. You can apply CSN Note 719778 in order to check and resolve connection leaks.
2) Configuration to DB/EIS is wrong or DB/EIS is temporary unreachable
3) Connections are not enough for current load.
I tried many ways to resolve this problem unfirtunately i couldn't.Whether this gives any issues i mean shall i ignore this if not please suggest me to resolve this.
Thanks in advance
Regards
Kumar

Dear Team,
I am facing the same issue in SLD(PI Java Stack).
Please find below snapshot. Please Help. Many Thanks .....

No red colors on projector

When showing Keynote presentations via my Macbook and the official Apple convertor to VGA for the projector, I still get no red colors on projectors (or beamers as they are called in Holland). I have tried everything, used different VGA cables. I have been in several presentation rooms, with different projectors and different VGA cables, and the problems remains. No red colors...
It does not seem to be a problem with the different projectors or their attached VGA cables. The Apple convertor is the official convertor as sold by Apple,
Anybody any idea???
Willem

Did you ever figure this out?
I am having the same issue.
Changed the color profile like suggested in other threads, also recalibrated in about a hundred different ways, all to no avail...
The red on the projector screen is showing up as black.
I am currently using a Dell 1100MP projector, but switched it out to a Sanyo and still had the same problem.
I, too, am using an Apple connection for my VGA cable.

Any alternate solution to using Waveform Chart Property Nodes 'ActPlot', 'Plot.Visible' for mulit-plot color problem on PDA?

Hello,
    On a waveform chart, 4 signals need to be plotted based on the status of 4 boolean inputs. Eg. if the first boolean input is true, the first signal needs
to be visible on the waveform chart; if the first boolean input is false, the first signal should not be visible on the waveform chart and so on. This can be
done on LabVIEW desktop using the Waveform Chart Property Nodes 'ActPlot', 'Plot.Visible' - a sample VI "BundleSignals_Select_Desktop.vi" is attached for
reference.
    But on PDA, since the Waveform Chart Property Nodes 'ActPlot', 'Plot.Visible' are not supported, some other method has to be used. I have done the
selection/de-selection of these signals using 'Insert', 'Delete' array functions as shown in the attached VIs "BundleSignals_PDA.zip" which works, but the
problem is that the colour of these signals do not work as desired when the selection/de-selection of these signals is done - It is required that the first
signal should always appear in White color, the second signal should always appear in Red color, the third always in Green color & the fourth always in Blue
color.
    I hope i have made myself clear of the problem. Has anyone faced this problem before & is there a solution?
Note: Version of LabVIEW that we are using: LabVIEW 8.5 Professional Development System for Windows Vista/XP/2000 and LabVIEW 8.5 PDA Module for Windows
Mobile.
Thanks & Regards,
Subhashini
Attachments:
BundleSignals_Select_Desktop1.vi ‏25 KB
BundleSignals_PDA.zip ‏26 KB

Unfortunately the only alternative to using property nodes is to set the properties manually on the development environement. The limited size of memory does limit us in terms of features for the module.
Mehak D.

AP's 1240 Change to Red Color in the WLSE

Hi
I work with the WLSE and I connect more APs 1240 in my network, but when I try to add these devices appear in red color or in other cases in yellow color. I check the IOS version of that Devices and does not appear to be that.

No Msr, Thanks for your opinion, but That AP's was installed and worked in the network. I think That problem it's because the Ap's has interference. When I instal other Ios Version, I saw the Ap's change to yellow color and before that change I saw The Ap's int red color.
Waht do you Think??

Missing red color in adobe RGB

I shoot raw with Nikon Camera. I am having a problem with getting red color in photoshop. . For nef files, I open them in Capture NX2 and then save as jpg in Photoshop. The jpg image was opened in Photoshop CS5 with a color setting of sRGB, beatiful red color is seen on the screen. When the same.file was opened in in Photoshop CS5 with a color setting of AdobeRGB ("aRBG"). the red color turned into orange color.
As shown here, the only difference in color is red hue between sRBG and aRGB. This is not an isolated case. All of my pictures look like that. When printed on Canon i9900 inkjet printer under "Photosbhop Manages Colors setting, red color comes out in orange color. But printing under Printer Manges Colors" setting, they came to be close to red color. I do not understand why aRBG does not produce red color. Could someone explain to me why?
PS: I could not upload two pictures (sRBG and aRBG). It seems that inserting image was disabled.

hummer777 wrote:
The jpg image was opened in Photoshop CS5 with a color setting of sRGB...
When printed on Canon i9900 inkjet printer under "Photosbhop Manages Colors setting...
These statements are vague or functionally incomplete. For example, are you saving your JPEGs with a color profile embedded? When you choose "Photoshop Manages Colors", what profile is set for the printer?
Do you have a basic understanding of color-management?
The kinds of color shifts you're describing can occur if you are assigning a profile different than the one the RGB values are encoded in, or viewing an image encoded in Adobe RGB with a non-color-managed application.
The document color profile needs to match the profile used to encode the RGB values, and the application needs to interpret the color profiles of both the document and the output device for the color to be displayed or printed properly.
May I recommend going out and seeking some primers on basic color management online. Keep in mind a lot of what's published is sometimes misleading or downright inaccurate, because a lot of people have trouble understanding color management at first. Try to avoid advice that says "set it like this", but seek the information that describes how color management actually works, so that you can get your mind around it and make your own informed decisions how to set things up.
-Noel

Font color problems in one forum

I'm in a classical music forum--for at least 3 years I could post and reply to messages with my blackberry with a minimum of difficulty. However in the last month when I go to post my reply before I reach the submit option on the screen the font color boxes the forum offers now appear and there are many color choices. It takes a long time to scroll down to where I have to be to hit submit? Is there any option on the blackberry to avoid having to do this? Can I eliminate having to see these big colored boxes every time I post or reply? Any help would be appreciated. Regards, Len

I have found a serious problem in my 17inch imac, the colors in the upper side of the screen looks darker that the bottom, if you make a rectangle in a dark red color in illustrator or photoshop it looks like a gradient, the color is not solid, My imac is just 2moths old, what can i do, I send it to my local apple service provider ( guadalajara mexico), and they change the display for a new one, and te failures is still there, they want now to change the logical board....wath can a I do if they do not can fix it?... excuse my inglish by the way

Red color problems in LR 4.1

Similar Messages

Maybe you are looking for