Red cross button vs cmd+h

Hi, I would like to ask someone what is the difference between pressing a red cross button or pressing cmd + h command for hiding an application? If cmd+h is used then cmd+tab can be used for bringing any running application on desktop but all apps which were hidden by pressing red cross button cannot be restored/ display on the screen by pressing cmd+tab command even they are shown in a menu. It does not make a sense for me and in my opinion it would by great if red cross button works in the same way like cmd+h command

Pressing the red button actually closes the window; for some applications, closing the only window will also quit the application. Hiding the window or application keeps it open in the background or on the Dock.
(44417)

Similar Messages

Pressing red-cross button in safari and then opening

Hi! When i'm pressing red-cross button in safari and then opening it again my recent webpages that was open when i closed safari don't show up again? This have worked before but now i doesn't? Please help MacGurus!!!
Best regards Henrik
This is my current preferences in Safari

You are misunderstanding the preferences.
The open with same page preference takes effect when you open a new window with a window open. If no window is open when you open a new window, there is no "same page" to open. It will then open your home page setting.
The All Windows from last session is similar. If you don't have any windows open in the last session, there is nothing to reopen. Your last session has no windows open.

New 80GB ipod - red cross with support website

Hi
I was connecting my new ipod (only 3 weeks old) to my macbook leopard when suddenly a red cross symbol came up on the screen with the address of the mac support website at the bottom. I went to the website and it suggested I put it in disk mode. The apple sign came up as described - but straight after I toggled the hold button not roughly six seconds after holding the select and menu button as it suggested. Next when I tried to switch 'immediately' to the select and play button, it returns to the red cross with the web address - not to the disk mode screen.
I have tried holding them down for different lengths of time, swapping quicker and faster etc but no change. If I repeat holding the select and menu buttons then the apple symbol goes away momentarily and comes back.
Im on holiday at the moment - so if theres nothing to do but send it off to be fixed then it means Im without my ipod for the long traveling hours - the reason I bought it when I did - only 3 weeks ago - I hadnt expected it to break so soon. I also have a macbook and before that had an ibook and they both had early problems. I am always conflicted with apple - they make the best most advanced and creative products but they are always flawed and undurable - quick to break and succumb to errors. I am starting to think that I may just slum it out with pc in future - it may be better in the long term.
Ironically enough Im not even sure if I kept the HMV receipt at home = I really should have learned after past experiences with apple products. If anyone could save me the hassle and money of paying for repair (if I cant find the proof of purchase) by suggesting another way to fix it for the rest of my journey - I would really appreciate it!
THANKS :)*

Ok researched online and managed to get it in Diagnostics mode.
Ran a test on HDD Specs and HD Smart Data - both resulted in "Error! Diag Halt" flashing across the bottom of the screen.

My bb 9380 won't turn on while the screen shows one battery sign with red cross mark ( not charging sign )

my bb 9380 won't turn on while the screen shows one battery sign with red cross mark ( not charging sign ), i think the battery drained and switch it for charging but it will show only not charging sign . i bought this phone before 9 months, whats the solution for this ?

Hi and Welcome to the Community!
Please try this sequence...note that, throughout the entire 4h15m process, your BB must remain directly connected to a known-good wall charger (not PC USB, not a cradle):
With the battery inside, connect your BB to the wall charger
Leave it alone for 2 hours, no matter what the LED or the display does
Remove the battery
Wait 15 minutes
Insert the battery
Wait another 2 hours, no matter what the LED or the display does
This has been known to "kick start" some BBs.
It is also possible that your battery or BB has experienced a problem...to test, this sequence is needed:
Obtain an known good and already fully charged additional battery...use it in your BB and see what happens
Obtain access to a known good and identical BB...use your battery in it and see what happens
The results of this will indicate if it's your BB or your battery that has the problem. Note carefully please that "new" and "know good" are not necessarily the same things. While rare, a "new" battery certainly could be defective. Rather, the simplest (and least costly, btw) method to conduct this test is to find someone with an identical BB who has no issues...trade batteries and see what happens.
Good luck and let us know!
Occam's Razor nearly always applies when troubleshooting technology issues!
If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
Join our BBM Channels
BSCF General Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

HP Probook 4520s: sound card doesn't work (no sound, red mute button)

Нello!
I have an issue with my HP Probook 4520s. Its internal speakers and microphone doesn't work. I've tried to install and reinstall drivers from here, tried to rollback driver to older version but I always have the same result: installed the IDT sound codec, and after a restart, the mute button turned red and I cannot switch it.
Soundcard device ID: HDAUDIO\FUNK_01&VEN_111&DEV_7605
OS: Windows 7 Professional x86
How can I fix it?

Hi, just registered to post my solution. I got HP ProBook 4330s in for repair. Problem: some sticky liquid spilled all over and no sound. Also discovered that no microphone as well, but webcam did work just fine.
What I tried:
1) Installed fresh Win 7 Ultimate 32-bit and all official drivers (audio driver did not want to install), still no sound. Sound icon shows red cross. Message: No audio output device installed.
1) Installed the newest version of BIOS, in my case F.40, still no sound.
2) Pluged in headphones, still no sound.
3) Took apart, unpluged and firmly inserted every possbile cable, still no sound.
4) Found in BIOS everything that relates to Audio. Made sure Audio device is enable, still no sound.
5) Install XP and installed XP sound driver, still no sound. In fact, that driver did not install correctly, showed some kind of error.
What did work, in consecutive order:
1) Took apart again and took out the coin battery that retains the BIOS data, date, clock etc.
2) Put everything back together, switched on, entered the correct date in BIOS settings, and started Win 7 Ultimate. Still no sound. But I noticed that Win 7 Ultimate has found some devices and was installing drivers for it. Though did not check exactly which ones.
3) If I could not get the sound working I was determined to buy some speakers with USB connection. Then, I remembered that I already had a set of speakers for another laptop. These speakers had USB connection to draw power from and a grean standard headphone connection/plug to draw audio signal. I plugged in these speakers into HP 4330s and the sound started coming from these external speakers. The sound icon next to the clock in bottom right corner switched to normal mode and I could control volume with my mouse. Then I unpluged external USB speakers and the sound started coming from the HP's built in speakers.
Checked with Device Manager that correct sound drivers are installed and microhpone appeared to be installed as well. Though did not check with Skype if microhpone was working.
I was soooo happy!!! I struggled with this problem for three long days, searched many forums (none gave solution), tried everything with drivers, took apart the laptop some three or four times (now I learned to do it with my eyes closed, so to speak).
I started to think that taking out the BIOS/date coin battery did the trick. There must be some glitch in BIOS to motherboard connection in these HP ProBook laptops, and all BIOS settings need to be reset.
I'll be happy if this helps someone.

Battery, Red Cross, Dead Blackberry...

Hi All,
I put my BB 9220 in water by mistakenly and it started to work initially for say around 8 hours but now it shows a battery mark with a red cross over it. Can you please help in setting it right?

That battery is either discharged or damaged. It could also be a problem in the charging circuit. No telling with water damage.
1. Please thank those who help you by clicking the "Like" button at the bottom of the post that helped you.
2. If your issue has been solved, please resolve it by marking the post "Solution?" which solved it for you!

I need help a Red Cross when I send a instant message but Internet still works?

Well I topped up not that long ago and when I have tried to send a instant message it comes up with a red cross but my Internet still works? I need it to work it's urgent

Hi and Welcome to the Community!
BBM, SMS, or some other service please? The exact service you are having trouble with will likely have a completely different resolution path from the others...
Good luck and let us know!
Occam's Razor nearly always applies when troubleshooting technology issues!
If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
Join our BBM Channels
BSCF General Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

Red Cross with 2 dots underneath

Have had the Black vision box for a while now and all has been fine, but all of a sudden one day , the red cross with 2 dots have come up, so anyone know how to get it back to normal? i have tried turning it off by the switch and holding the Ok button and down button at the same time i switch it on but then these cogs come up and then they load and take me right back to the red cross again! so how do i fix it?

Did a search on te forums for red dot : Re: cogs of death
Options
on 19-10-2011 19h14
Known as the red cross of doom, sadly.
It means that the box failed to get an update applied and it is in a corrupt state.
The only possible solution is a full factory reset which if successful will leave you with the box in the state it was delivered but with new software. It will however wipe all your recordings.
Factory Reset
Switch off the Vision+ box at the mains socket
Hold down the front panel OK and down arrow buttons
Switch on the power to the Vision+ box
Allow the box to start up (about 15 seconds)
Release the OK and down arrow buttons
The Vision+ box will then contact the servers to get a new copy of its firmware
This will take around 30 minutes
If this doesn't work I'm afraid your box will need replaced, you can either contact the Mods or phone the helpline
If you like a post, or want to say thanks for a helpful answer, please click on the Ratings star on the left-hand side of the post.
If someone answers your question correctly please let other members know by clicking on ’Mark as Accepted Solution’
Contact the Moderators
http://www.btlife.bt.com/
http://kafkasworld.com/
My Radio Station
Life | 1967 Plus Radio | 1000 Classical Hits | Kafka's World
Someone Solved Your Question?
Please let other members know by clicking on ’Mark as Accepted Solution’
Helpful Post?
If a post has been helpful, say thanks by clicking the ratings star.

Grey Screen with red cross and three dots - engine...

Seriously?! No TV for 3 days with a toddler in the house... I am going to go mad... is there any way this can be fixed without waiting for the engineer. Please help?

joko81 wrote:
Thanks for the reply, my lord... 2 weeks? I am terrified about the next three days... doesn't help that I'm also pregnant so am not really fit to be running around the park keeping him busy! So will the engineer definitely fix it on Friday?! How likely is it that it won't be able to be fixed? Gosh can you hear the fear? Hubby is furious! He absolutely hates it when things break and he can't fix them! So I have two moody toddlers in the house and a wriggly baby kicking me in the ribs... maybe I should go stay at my Mums! Lol!
Have you tried resetting the box ?
You need to remove the power from the back of the vision box, then hold down the centre and down buttons on the box and re-apply the power whilst holding them down for a few seconds afterwards.
It should go for a reset, and show a progress bar. It might then show a couple of cogs after the initial cog. If you get back to the red cross, try the process again.
If it still fails, remove all the power from the hub for 5 minutes whilst keeping power to the vision box. Go for a Vision box reset again as before and see what happens.
Sorry it's a bit disjointed - and a bit hit and miss.
http://www.andyweb.co.uk/shortcuts
http://www.andyweb.co.uk/pictures

Battery symbol with red cross wont charge

ive had a blackberry crbe for about 4 months it is brillaiunt condition , but all fo a sudden the phone switched off and now wont turn on . ive tryed charging it but all that comes up is a empty battery sign with a red cross
i had it on charge all night and have tryed 3 different chargers and 2 batterys and still nothing ?
help ?

Hi and Welcome to the Community!
Given what you describe, I think you've done all of the diagnostics that you can...kudo's to you for having thought to try what you did! But, what it indicates is a hardware-level problem in the BB itself, somehow not communicating properly with the battery. For this, only a qualified service technician with the BB in their hands can diagnose any further...and that can't be done at an internet-distance.
If your BB is still under warranty, then take it in for evaluation. Your warranty service provider is whoever you bought the BB from -- your mobile network provider or your authorized reseller would be who you go talk to next.
If your BB is out of warranty, then you can talk to those same folks about other options.
Good luck!
Occam's Razor nearly always applies when troubleshooting technology issues!
If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
Join our BBM Channels
BSCF General Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

When plugged into computer a song started skipping, pressed pause but ipod sounds makes a clicking sound. Eventually goes to black screen with red cross. Cannot reset it and doesn't register on my computer.

I had my iPod plugged into my computer and was playing the songs from there. One song started skipping so I pressed the pause button, the ipod kept making a clicking sound like it was still struggling to play the song, eventually went to a black screen with a red cross with apple.com/support/ipod underneath. Have tried to reset it but does not work, comes up with apple logo and immediately makes the clicking sound and then crashes.
Is there anyway I can get my music and photos off?? I just got a new computer and had lost everything on my old one so only have the songs and photos on my ipod, desperately want to get them on to my computer.

You may have damaged the HDD which is located in that spot. I would take it in for service.

CUPC 8.6.1 with red cross which means no ringing

Hello!
In some way, we have the problem, that cupc change it's presence status from DND to available. The red presence indicators changes from red to green, but sometimes, the red cross on the handset icon didn't change, so I have the setup that I have a green presence indicator, but a red cross which means that I cannot hear incoming calls. If you change status back to DND and then back to available brings no success, also restarting the cupc client is unsuccessfull. I do not know when exactly this happens, a lot of users are telling me about this issue. I then have to manually onhook the DND status in device settings of the framework services client of the cupc endpoint to get it running again, that user hear the sound of incoming calls.
Can someone help? Any idea? Someone aware of this issue/bug?
We are using CUPC 8.6.1 and CUCM 8.6.2
Thanks!

No one an idea?

FEBA :Banking: Red Cross on bank statement upload

Hello Gurus,
I am facing a strange behaviour in electronic bank statement uploads.
The file is uploaded in the system and its shown as Red cross. There are no transactions in the bank statement and the opening and closing balances are same.
There is no activity in the bank account and still on loading the satement it shows a Red Cross for file loaded on June 20th.
The file coming on June23rd is loaded successfully and has a green checkbox where again there were no transactions and opening and closing balances are tallied.
I dont see any value or sign difference. I checked other threads but couldnt get solution and had to open a new discussion
Any thoughts on how we can change the red cross to Green Tick. SAP instance is on ECC 6.0.
Any utility to be developed?
Regards
Rutvij

Hello Rutvij,
FEBAN - give Co.code, house bank, account id, statement date and statement nubmer.
If it is outgoing payment then go to statement items i con in top side of that screen. Then click post option.
In the next screen click on payment order because if you want to clear invoices based on payment orders or click either reference or document number in additional selections tab. And then give your co.code and account type. If required, put additional selection like amount, reference, etc in additonal selections tab.
Press enter and then select open items to be cleared and then save.
Now SAP will display all open invoices against the customers. Activate the invoices that must be cleared. Simulate document. Now enter the payment amount and press enter.
Enter once again in the next screen then press save. Now you will get a message saying that document got posted with no.xxxx in co.code
I hope it will resolve your issue else revert us with your query.
Thanks & Regards,
Lakshmi S

I tried down loading mozilla firefox to use as a web browser. It was downloaded 100% then when prompted to "run" the error message comes up with a red cross and the message'This file is corrupted" and won't let me proceed. What do I do now?

I tried down loading mozilla firefox to use as a web browser. It was downloaded 100% then when prompted to "run" An error message comes up with a red cross and the message'This file is corrupted" and won't let me proceed. What do I do now?

It is possible that your anti-virus software is corrupting the downloaded files or otherwise interfering with downloading files by Firefox.<br />
You can try to disable the real-time (live) scanning of files in your anti-virus software temporarily to see if that makes downloading work.
See http://kb.mozillazine.org/Unable_to_save_or_download_files

A red cross has come up on the screen of my Ipod classic, what do I do?

my ipod classic was out of charge so i have charged it for 24 hours. when i went back on to it it came up with a red cross and said that i had to go the support page but i cant find anything and need help. any suggestions.

iPod Displays a Red "X" Icon
tt2

Red cross button vs cmd+h

Similar Messages

Maybe you are looking for