Red cross icon on BBM.

Hi, I am new to the forum so please bear with me if this question has been asked before.
When I have typed my message and hit send I get a red cross on the left of the screen. I am also unable to recieve any messages.
This has only started to happen since yesterday.
Any help or advice would be really appreciated.
Thanks in advance,
Lucy.

Hello lucy
Please try this in the same sequence,to see if it helps :
1- Register your Handheld .
KB00510 How to register a BlackBerry smartphone with the wireless network
Wait till a Registration messages comes in your message box.
2- Resend your Service Book
KB02830 Send the service books for the BlackBerry Internet Service
3- Then perform a battery pull restart like this while the device is powered On remove your battery wait for a min. then reinsert it back.
Please try and if it does not work then I think you need to contact or call your carrier Orange to know if there is any issue with BIS on there Network.
Prince
Click " Like " if you want to Thank someone.
If Problem Resolves mark the post(s) as " Solution ", so that other can make use of it.
Click " Like " if you want to Thank someone.
If Problem Resolves mark the post(s) as " Solution ", so that other can make use of it.

Similar Messages

Function will not run (and shows with red cross in SQL Developer)

I have created the function below by typing into the "Enter SQL Statement" box in the SQL Developer tool and running. I see the message "create or REPLACE FUNCTION Statement Processed". I see the Function in the tree view, but it has a red cross icon next to it, so I guess somethings wrong with it. When I try to run it I get the message "The selected program is in an invalid state for running. Recompile the program and try again." If I right-click the function and compile then I get no errors but the red cross remains and I still can't run it.
What am I doing wrong?
Also, I am planning on supplying a SQL script to customers that will have this function at the top of the script, and then I will use the function throughout the rest of the script to decide whether or not to drop a table before re-creating it. Will that be ok? i.e. will the function be available to the rest of the script, or would the function creation need to be followed by a commit/grant/other?
CREATE OR REPLACE FUNCTION CHECK_TABLE_EXISTS(tableName VARCHAR2)
RETURN BOOLEAN IS
    tableExists NUMBER(1,0);
BEGIN
      SELECT COUNT(*) INTO tableExists FROM user_tables WHERE table_name=tableName;
      IF tableExists = 1 THEN
        RETURN TRUE;
      ELSE
        RETURN FALSE;
      END IF;
END CHECK_TABLE_EXISTS;Thanks,
Paul

Hello Try the same at sqlplus and see how it goes. It should not throw any error messages as I tried the same as a normal user Scott with only (connect, resource) priveleges. You dont have to grant any specific previleges for user_tables.
-Sri
SRI>conn scott/tiger@sri
Connected.
SRI>CREATE OR REPLACE FUNCTION CHECK_TABLE_EXISTS(tableName VARCHAR2)
2 RETURN BOOLEAN IS
3      tableExists NUMBER(1,0);
4 BEGIN
5        SELECT COUNT(*) INTO tableExists FROM user_tables WHERE table_name=tableName;
6        IF tableExists = 1 THEN
7          RETURN TRUE;
8        ELSE
9          RETURN FALSE;
10        END IF;
11 END CHECK_TABLE_EXISTS;
12 /
Function created.
SRI>set serverout on
SRI>begin
2 if check_table_exists('EMP') = TRUE
3 THEN
4 dbms_output.put_line('Found');
5 else
6 dbms_output.put_line('Not Found');
7 end if;
8 end;
9 /
Found
PL/SQL procedure successfully completed.

Red cross in the icon

I now have a red cross in the icon for wireless network connection were do I look to fix it?

Denboy, welcome to the forum.
When requesting help, you should always include the make/model of the computer and/or monitor. This information is necessary for us to review the specifications of them.
Signature:
HP TouchPad - 1.2 GHz; 1 GB memory; 32 GB storage; WebOS/CyanogenMod 11(Kit Kat)
HP 10 Plus; Android-Kit Kat; 1.0 GHz Allwinner A31 ARM Cortex A7 Quad Core Processor ; 2GB RAM Memory Long: 2 GB DDR3L SDRAM (1600MHz); 16GB disable eMMC 16GB v4.51
HP Omen; i7-4710QH; 8 GB memory; 256 GB San Disk SSD; Win 8.1
HP Photosmart 7520 AIO
++++++++++++++++++
**Click the Thumbs Up+ to say 'Thanks' and the 'Accept as Solution' if I have solved your problem.**
Intelligence is God given; Wisdom is the sum of our mistakes!
I am not an HP employee.

Red cross when sendin 1 person a Bbm

I've had this problem.....the red cross when sending just the same 1 person a Bbm and even sendin them a pin MSG. This has been happening for 3weeks now. I can still receive msgs from them though......please help as I've tried everything xx

Hello Chelle29
Welcome to the Community
Have you tried deleting the contact and adding them back by sending them an invite?
Ron
Click "Accept as Solution" if your problem is solved. To give thanks, click thumbs up Blackberry Battery Saving Tips | Follow me on Twitter

Lan icon shows red cross but have internet

Hi,
my lan icon shows red cross but i have internet access, can assist?
have tried sfc /scannow but no error detected.

Hi,
This issue is related to Network Connection Status Indicator, which is reponsible for detecting Internet connectivity status using an active probe. Please check if the probe is enabled.
HKLM\ SOFTWARE\Policies\Microsoft\Windows\NetworkConnectivityStatusIndicator
Value: EnableActiveProbing (DWORD) defaults to 1, Set this value to 0 will disable active probes.
Or Expand Computer Configuration\Administrative Templates\System\Internet Communication Management\ Internet Communication settings.
In the details pane, double-click Turn off Windows Network Connectivity Status Indicator active tests, and then click Enabled.
Andy Altmann
TechNet Community Support

CUPC 8.6.1 with red cross which means no ringing

Hello!
In some way, we have the problem, that cupc change it's presence status from DND to available. The red presence indicators changes from red to green, but sometimes, the red cross on the handset icon didn't change, so I have the setup that I have a green presence indicator, but a red cross which means that I cannot hear incoming calls. If you change status back to DND and then back to available brings no success, also restarting the cupc client is unsuccessfull. I do not know when exactly this happens, a lot of users are telling me about this issue. I then have to manually onhook the DND status in device settings of the framework services client of the cupc endpoint to get it running again, that user hear the sound of incoming calls.
Can someone help? Any idea? Someone aware of this issue/bug?
We are using CUPC 8.6.1 and CUCM 8.6.2
Thanks!

No one an idea?

A red cross has come up on the screen of my Ipod classic, what do I do?

my ipod classic was out of charge so i have charged it for 24 hours. when i went back on to it it came up with a red cross and said that i had to go the support page but i cant find anything and need help. any suggestions.

iPod Displays a Red "X" Icon
tt2

My bb 9380 won't turn on while the screen shows one battery sign with red cross mark ( not charging sign )

my bb 9380 won't turn on while the screen shows one battery sign with red cross mark ( not charging sign ), i think the battery drained and switch it for charging but it will show only not charging sign . i bought this phone before 9 months, whats the solution for this ?

Hi and Welcome to the Community!
Please try this sequence...note that, throughout the entire 4h15m process, your BB must remain directly connected to a known-good wall charger (not PC USB, not a cradle):
With the battery inside, connect your BB to the wall charger
Leave it alone for 2 hours, no matter what the LED or the display does
Remove the battery
Wait 15 minutes
Insert the battery
Wait another 2 hours, no matter what the LED or the display does
This has been known to "kick start" some BBs.
It is also possible that your battery or BB has experienced a problem...to test, this sequence is needed:
Obtain an known good and already fully charged additional battery...use it in your BB and see what happens
Obtain access to a known good and identical BB...use your battery in it and see what happens
The results of this will indicate if it's your BB or your battery that has the problem. Note carefully please that "new" and "know good" are not necessarily the same things. While rare, a "new" battery certainly could be defective. Rather, the simplest (and least costly, btw) method to conduct this test is to find someone with an identical BB who has no issues...trade batteries and see what happens.
Good luck and let us know!
Occam's Razor nearly always applies when troubleshooting technology issues!
If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
Join our BBM Channels
BSCF General Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

After following the instructions to reset my ipod classic i am confronted with a red cross. Does anyone know how to remove this?

After following the instructions to reset my ipod classic i am confronted with a red cross. Does anyone know how to remove this?

Hello theplantman5,
Thanks for participating in the Apple Support Communities.
If your iPod only shows a circle and cross (or x) screen after resetting or restoring it, try placing it in Disk Mode and restoring it.
Restore iPod from Disk Mode
Disconnect iPod from your computer.
Manually put iPod into Disk Mode.
Open the latest version of iTunes and connect iPod.
Restore iPod.
If these steps don't work, or you've already completed them, your iPod may need service:
Setup Service for iPod
If you cannot force your iPod into disk mode and restore it, then your iPod may need service. Click one of the links below to setup an iPod Service Request online or make a reservation at the Genius Bar before visiting your local Apple Retail Store.
Apple Retail Store
iPod Service Request Online
You can find the steps above in this article:
iPod Displays a Red "X" Icon - Apple Support
All the best,
Jeremy

Red cross

My ipod classic is coming up with a red cross and reporting me to the itunes website, does anyone know how to fix this?
I have tried to reset it however it just keeps coming back to the red cross someone please help....

Leave the device to charge 2-3 hours, and then, still connected to the USB cable, remove the the battery from the device a few seconds and reinsert it. If it boots--leave it to charge to 100% (check Options > Status for the percentage).
1. If any post helps you please click the below the post(s) that helped you.
2. Please resolve your thread by marking the post "Solution?" which solved it for you!
3. Install free BlackBerry Protect today for backups of contacts and data.
4. Guide to Unlocking your BlackBerry & Unlock Codes
Join our BBM Channels (Beta)
BlackBerry Support Forums Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

Red cicle with a red cross inside - IPod Classic (5th Gen)

I have a IPod Classic (5th generation) which I use time to time.
When I start it ... it seems to start normally, but after a while it display a red circle with a red cross inside ... with the indication www.apple.com/support/ipod
I tried all what I could find to restart, reset, restore ...
I can't see it on the latest ITunes version nor on file explorer.
Not sure what to do next !
Thanks for any support on this.

Hi bpujol,
Here is an article that addresses what you are seeing:
iPod Displays a Red "X" Icon
http://support.apple.com/kb/TS1463
Cheers!
- Ari

My laptop wifi connection disables automatically and red cross comes up

Hello
I just bought a new toshiba laptop L850-B211 with win 7 home premium 64 bit and i have noticed that my wifi disables automatically in between and i see a red cross come up on the tower icon....when i click on the tower cross it automatically connects....and
works fine again. But why is it disabling the wifi adapter automatically. this happens in every 30 or 40 mins even when i am surfing the net. Is this a hardware problem or some setting in windows 7 or toshiba power management utility which is causing this
problem. Also to mention i always use my laptop with power cord connected. The model no of wifi adapter is ATHEROS AR9485WB-EG.
Thanks,
Amit T.

Hi,
When trying to connect the Wireless network, please check the “Start the connection automatically” option. Then, when you trying to connect certain Wireless network next time, it should connect
to the Wireless network automatically.
In addition, update the wireless adapter driver to see how it works.
Also, please check this thread:
wireless adaptor disables automatically
Hope this helps.
Vincent Wang
TechNet Community Support

I need help a Red Cross when I send a instant message but Internet still works?

Well I topped up not that long ago and when I have tried to send a instant message it comes up with a red cross but my Internet still works? I need it to work it's urgent

Hi and Welcome to the Community!
BBM, SMS, or some other service please? The exact service you are having trouble with will likely have a completely different resolution path from the others...
Good luck and let us know!
Occam's Razor nearly always applies when troubleshooting technology issues!
If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
Join our BBM Channels
BSCF General Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

Red cross with circle

my ipop has a red cross with a red circle around it - how can i reset or get around this problem
its a ipod classic 120gb

Hi seantuckett,
Thanks for visiting Apple Support Communities.
If you're seeing a red X and circle on your iPod screen, this article has steps that can help:
iPod Displays a Red "X" Icon
http://support.apple.com/kb/TS1463
Cheers,
Jeremy

Curve 8530 Red Padlock Icon only when I make/receive calls

When I make or receive a call, a red/white icon resembling a padlock appears in the upper left next to the phone-link icon. Anyone have any idea what that is and why it is showing up all of a sudden?

Are the circles horizontal across the icon or diagonal across...
You're sure it is circles not small ++++ ? See the enhanced call audio icons below.
1. If any post helps you please click the below the post(s) that helped you.
2. Please resolve your thread by marking the post "Solution?" which solved it for you!
3. Install free BlackBerry Protect today for backups of contacts and data.
4. Guide to Unlocking your BlackBerry & Unlock Codes
Join our BBM Channels (Beta)
BlackBerry Support Forums Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

Red cross icon on BBM.

Similar Messages

Maybe you are looking for