Red error of a web template in Metadata Repository in TEST system

This red error only occurs on our test system (maybe related to transport).  RSA1->Goto Metadata Repository page->Double Local objects under Activated objects in the middle frame -> Double click Web Template Name in the right frame, then can see two same lines of red errors (see below in between two dashed lines):
Object 'our_web_template_name' (our_web_template_name) of type 'Web Template Name' is not available in version 'A'
Message no. RSO252
Diagnosis
You wanted to generate an object with the name 'our_web_template_name' (in transport request our_web_template_name) of type 'Web Template Name' (TLOGO). This is, however, not available in the BW Repository database. It does not exist in the requested version A. If the version is 'D' then it is possible that an error arose during the delivery or installation. If the version is 'A' then the Object was either not created or not activated.
System response
The object was not taken into account in the next stage of processing.
What could cause the above red error in Metadata Repository how to correct it?
Thanks

For these requests can you check if they contained objects like:
BW: LOIO Class Web Templates
BW: PHIO Class Web Templates
See, even if the transport for a web template does not contain these, it is imported fine, but the web template will not function in the target system. This happens quite often and you need to make sure that the above objects are also included in the request.
Hope this helps...

Similar Messages

  • Error: web template does not exist in master system

    I have Bex 7x query. I wnat to publish it on SAP enterprise portal (EP 7.0 SP19).
    When I create a Bex iview and provide link of query, I get following error in preview:
    The webtemplate <queryname> does not exist in master system.
    Could you please let me know what can be the root cause of this error?
    Regards,
    Deepti

    Dear Deepti,
    Can you please make sure that Web template "0ANALYSIS_PATTERN" is acive in your system. If not, please activate it from
    Business content.
    You can check this by following below steps:
    Please run TX SE38 and Execute Report RS_TEMPLATE_MAINTAIN_70 and enter the template name and execute.
    If you could see the HTML code , this means it is activated.
    Could you also please confirm me the settings you have in TX RSCUSTV27.
    Regards,
    Arvind

  • Urgent - Error when opening web template

    Hello,
    I was trying to open few CRM SAP standard web template in WAD. When I try to open the web template, getting the following error:
    'The selected web template contains HTML fragments, non-supported web items or it is not designed to be edited with WAD. ......' Although I can execute templates and also can execute with 'RS_TEMPLATE_MAINTAIN' in BWD.
    I tried all the CRM web templates and getting same opening error. How can I solve this problem? I want to see the template in WAD. Is there any solution?
    I appreciate your help.
    Regards,
    Ashok

    You can only view the template "HTML" (code) view with WAD for the problem you described.  This can be done using RS_TEMPLATE_MAINTAIN or WAD.  You cannot view the template using WAD to get the "Layout" graphical view (is this what you are trying to see?). 
    The only way to get around this is to strip out the HTML "fragments" from the HTML code, or to partition the templates into sub-templates.

  • Error while saving Web Template in WAD

    When i try to save a web template in WAD i get an error masg " Unable to generate history entry" and when i save ok i can see that the templete has been saved wven though i had the error message.I am in BI 7.0.Any idea what this error is and how do i get it resolved

    Hello,
    This error comes when your portal configuration is incorrect.
    please deploy the support Desk Tool according to the note 937697 and fix the portal configuration.
    Regards, Karol
    SAP NetWeeaver BI, Development

  • Error while saving web template

    Hi,
    Iam new to this forum , i have a problem and that is when iam trying to save web template, it is saying 'error in data transfer' and could not save.
    2.when iam trying to save a query in workbook it is throwing error'workbook storage fault -310' . Is this related to Excel problem?
    please clarify
    thanks and regards
    Raja

    Hi Raja,
    For the worbook error, you can check if note 592918 is useful.
    Hope this helps...

  • Error in saving web template

    Hi all,
    I have added a logo in web template in WAD but when i am clicking on save button in WAD it is showing error "object cannot be processed due to a transport problem".
    What is the problem. Please help !!!!
    Regards,
    Saurabh

    Hi Saurabh ,
    Either you have to close WAD and open it again, so it will recognize the new BEx transport,
    or some depenent objects are locked in another transport request. In that case, release both, open a new BEx transport, restart WAD and try saving again.
    Regards,
    Sigal.

  • Error in saving Web Templates

    I am currently seeing a problem in creating new Web Templates in Web Application Designer in SMD. The error occurs when a Web Template is newly created or when an existing Template is modified but clicking the OK button in the error dialog screen allows you to proceed with saving the template.
    Message Class      Message Number   Description
    RSBOLAP               014                     Transformer exception while transforming
                                                             BEx Web Templates
    RSWADMDERR1     090                     Java-Stack check found incorrectly
                                                             formatted templates
    Is there any known corrections/ implications in regards to this error? Thank you.

    Check and make sure BI and Portal connection is configured. Use note 917950 for  checking this.
    Also make sure you have the latest WAD SP level (Sp 12)

  • Error while saving web template in WAD? Error in opening RFC Connection?

    Hi All.
    In BI 7.0, While trying to save an web template using BEx WAD resulting an error as mentioned below:
    " Java communication error : Error when opening an RFC connection "
    Who provides this RFC connection?
    - By Basis guy or BI Guy or EP guy or helpdesk.
    Please reply.
    Thanks in Advance.

    Hi,
    Kindly review the notes 917950 and 888687 and ensure that all your web configuration settings are proper.
    Award points if helpful.
    Thank you.
    Regards
    Suresh

  • Error when collecting web template to transport

    Hi All ,
    I am gettingthe following error
    "No authorization for transporting role SAP_BWC_PATTERN_OBJECTS "
    when I collect a standard custom web template which was create by copying 0analysis_pattern template and adding some customizations.
    Please guide me.
    Thanks,
    HM

    check tcode - SU53 for authorization error immediately after you get the error ,if you find some fwd it to ur basis to assign proper auth to your user id.
    Hope it Helps
    Chetan
    @CP..

  • Error when loading Web Template from Web Dynpro

    Hi Experts,
    I work on a BI ABAP server. I'm trying to integrate a BIApplicationFrame in my ABAP Web Dynpro application.
    First, I created a Web Template (named ZTPL_Z0AFSD_C01_Q0001) with Web Application Designer and I can run it from there. It works fine. The address looks like :
    http://pwdf2927.wdf.sap.corp:50300/irj/servlet/prt/portal/prtroot/pcd!3aportal_content!2fcom.sap.pct!2fplatform_add_ons!2fcom.sap.ip.bi!2fiViews!2fcom.sap.ip.bi.bex?TEMPLATE=ZTPL_Z0AFSD_C01_Q0001&DUMMY=2
    In my BIApplicationFrame in Web Dynpro, I give the server name (and port), the server type (ABAP) and the templateId (ZTPL_Z0AFSD_C01_Q0001). My application work and the BIFrame try to open the following address:
    http://usciq75.wdf.sap.corp:50010/SAP/BW/BEX?CMD=LDOC&TEMPLATE_ID=ZTPL_Z0AFSD_C01_Q0001 ...
    I receive the error:
    Error loading template ZTPL_Z0AFSD_C01_Q0001 
      Notification Number BRAIN 276 
    So, it looks like that the server is found but my Web Template is unknown for Web Dynpro. Did I forgot a step after the creation of the Web Template that would 'activate' it and make it visible? Why the two Web Address looks so different?
    Thanks for your answer
    Davy

    Hi
    Check
    Re: JCO$Exception:  RFC_ERROR_SYSTEM_FAILURE in WAD Template
    Also make sure that you have installed 0ANALYSIS objects from Business Content->Object types -> BEx Web Template and choose all 0ANALYSIS objects and install the same.
    Hope this helps
    Raja

  • Run-time error when saving Web Template

    I recently got upgraded to Windows XP SP2 from Windows 2000.  Since then, when I make a change to a Web template, it can be as simple as check a Web Item property, and then try to save it, I get an error.  A window (called SAPBWWebAppDesigner) pops up with the message "Run-time error '-2147417848 (80010108)  Automation error.  The object invoked has disconnected from its clients". 
    I then get thrown out of WAD and have to log in again.  has anyone encountered this behavior? 
    Any suggestions would be greatly appreciated.

    hi,
    I had a lot of troubles with WAD and there are two causes of those:
    1. bad installation of SAP GUI and its add-ons (see note 197460)
    2. bugs in WAD
    Check note:
    857360 and those (but they are pretty old) 815044, 318248, 647405, 573436,
    Conclusion from above notes is to install latest GUI patch - talk about this with your basis staff (I think most recent for v6.40 is patch 11
    Regards,
    Andrzej
    ps. in case of errors always make a search in service.sap.com/notes on keywords
    Message was edited by: Andrzej Krysiuk
    Message was edited by: Andrzej Krysiuk

  • Error while opening web template through WAD 3.X

    Hi all,
    The below error is getting displayed while opening web template through WAD (Sap BW 3.X):
    " Internal error - No Template property standard item. "
    What needs to be done now.
    Please reply.

    Hi,
    Check the below thread...
    Web Application Designer Opening Error

  • How to display trafic light red/yellow/green in web template

    Hi All,
    I would like to implement a traffic light display within BW web templates.
    Please clarify how I can implement this.
    Thanks
    Karen

    Hi,
    Please check :
    Displaying traffic light in a web template.
    Display traffic lights for KPIs in a web-template (using thresholds)
    -Vikram

  • How to use a Web Template with queries from multiple BW Systems?

    Hi all,
    can anybody help me how to use a Web Template with queries (DATA PROVIDER)in it from multiple BW Systems?
    Thanks in advance, best regards
    Frank

    Great! Thanks for the quick response.
    Have you tried this for XMLA datasources created within the EP system also?
    i.e use Web Analyzer to create a view from the XMLA source and use that view within WAD?
    Thanks.

  • Transport Web Template, Query from development to productive system

    Hi!
    How can I transport Web Template, Query, workbooks from development to productive system?

    RSA1 ---> Transport Coonection ---> Object Types -
    > Select Web Tempelate ---> Drag to right and group under transport
    Similary do for other objects
    Thanks
    Amit

Maybe you are looking for

  • How do I get text to align and look uniform?  This shouldn't be as hard as I am making it!

    Basically, I am trying to get the heading centered and the text aligned left....or at least aligned uniformly here.  Unfortunately, for some reason I am unable to just mess with it in "design" as I usually do.  The design page is blank and I can only

  • PDF to Word Pictures are not visible

    I have just converted and PDF file into a word document with a few pictures and only one picture is visible and the others are all black

  • How to move iPhoto Library from external drive to new mac?

    I have exported a copy of my iPhoto Library from my old mac to an external hard drive. How can I import entire library into iPhoto of new mac? When I click Import to Library, I'm unable to highlight iPhoto Library file listed on my external hard driv

  • Place to put a code for dunning level change in F150

    Hi, I have a requirement to block the credit management of a customer ( KNKK-CRBLB) when dunning level of a customer reaches 3 (KNB5-MAHNS or MHND-MAHNS). I put my code in FM 'CHANGE_DUNNING_DATA'. But this  FM is executed only for the few cases. Rea

  • How do I eliminate this?

    Can somebody tell me how to get rid of this dialogue box that keeps appearing on my screen every day. http://s93744050.onlinehome.us/conflictbox.jpg It's called 'Conflict Resolver' and keeps telling me I have 4 sync conflicts and giving me a choice o