Red Eye Removal not working properly

I'm having a problem with the red eye tool. I've done a search of this problem which returned no results.
I have three similar photographs, i.e, taken a few seconds a part at a wedding ceremony. I've corrected the red eye problem on the first file. However, the red eye "dots" REMAIN when I switch to the next files. If I select the red eye tool, I even get the location ovals overlaying the new picture.
Bug?
Eric

> It only works on red eye, not bright eye, steel eye, green eye, or any other color.
How about Evil Eye? 8-}
Actually I've had the same problem with Red Eye Removal not working properly. Problem is intermittent and the eye was for sure red.

Similar Messages

Red Eye Removal not working

I am using 1.3.1 and started out using the original version of lightroom that was released. I have really enjoyed lightroom. However, the red eye removal tool which worked when I started using lightroom is no longer working. I am having to pull all red eye corrections into "Elements" and that is annoying. When I select the red eye tool and click on the red eye all I get is a beep. I have tried clicking and dragging to select the exact size and that does not work either, just a beep. Does anyone have an answer to my problem?

> It only works on red eye, not bright eye, steel eye, green eye, or any other color.
How about Evil Eye? 8-}
Actually I've had the same problem with Red Eye Removal not working properly. Problem is intermittent and the eye was for sure red.

Red eye tool not working

Since I reinstalled Aperture 3 on my new iMac, I cannot get the red eye tool to work. I get the circles around the eyes, but nothing happens... I looked for settings or something, but found nothing to solve my problem...

Yes, I am using the right tool. I have been using this tool in Aperture for a long time. In fact, it works fine on my older iMac. I imported the same photo in both iMacs. It corrects fine on my old iMac (2008), but it does nothing on my new 2013 iMac.
Both are running the same version of Aperture (3.5) and both systems are also running on Mavericks.
I noticed a difference in the build of the digital camera RAW, but I would be surprised that that would influence a feature like the red eye tool...
Newer iMac
Older iMac

Red Eye reduction not working

Iphoto 11
Red eye reduction does not work, auto is not selectable and circling eye and clikcingh does do anything.
I have trashed the plist file, repaired permissions and rebuilt the iphoto database. Nothing fixed the problem.
ANy other ideas I can try ?
all software updates applied , 10.7.3

As a Test:
Hold down the option (or alt) key and launch iPhoto. From the resulting menu select 'Create Library'
Import a few pics into this new, blank library. Is the Problem repeated there?

Red eye function not working correctly - big black spot

On my old mac I never had a problem with this feature. Now, when I hit the red eye button, a green dot appears on the icon and I get the croos hairs on the screen. I select the eye to change and it leaves a huge black/grey spot round the eye. Looks like an ink spot and it's quite large. What is going on here? Thanks
Matthew

Judy:
To get closer just move the slider at the bottom to the right. Then you'll need to hold down the space bar to drag the picture till the area you want is in view.
Regarding the green dot, that's a new one. Try deleting the iPhoto preference file, com.apple.iPhoto.plist, that's in your User/Library/Preferences folder. Also emptying the User/Library/Caches/iPhoto folder wouldn't hurt either.
Do you Twango?
TIP: For insurance against the iPhoto database corruption that many users have experienced I recommend making a backup copy of the Library6.iPhoto database file and keep it current. If problems crop up where iPhoto suddenly can't see any photos or thinks there are no photos in the library, replacing the working Library6.iPhoto file with the backup will often get the library back. By keeping it current I mean backup after each import and/or any serious editing or work on books, slideshows, calendars, cards, etc. That insures that if a problem pops up and you do need to replace the database file, you'll retain all those efforts. It doesn't take long to make the backup and it's good insurance.
I've written an Automator workflow application (requires Tiger), iPhoto dB File Backup, that will copy the selected Library6.iPhoto file from your iPhoto Library folder to the Pictures folder, replacing any previous version of it. You can download it at Toad's Cellar. Be sure to read the Read Me pdf file.

"Red-eye" removal for dogs

The red-eye removal tool works great in people, but not in dogs or other animals, mostly because their eyes don't reflect red.
What is the best way to do this? Is there another program that will do this automatically?

Basically humans have one reflective layer and animals have two. Here is an explanation I found with a Google search:
"The consistently red color of the human reflex derives from the red blood pigment hemoglobin. Light from the flash picks up the red from blood vessels encountered during its bounce off the retina, just as reflected sunlight picks up the color of a red sweater.
Why, then, do animal reflexes come in so many other colors and seldom in red? The answer lies in the tapetum lucidum, a highly reflective, variably pigmented membrane backing the retina in animals with good night vision (including dogs, cats and most domestic animals) but entirely absent in humans. The tapetum lies directly behind the retinal photoreceptors. (Nova's The Nocturnal Eye nicely illustrates the anatomy).
The tapetum enhances low-light vision by giving retinal photoreceptors a 2nd crack at any incoming light that manages to escape absorption (detection) on the first pass. In dogs, at least, an additional boost may come from tapetal fluorescence, which shifts incoming wavelengths into better alignment with the peak spectral sensitivities of the photoreceptors. Tapetal pigments surely come into play here.
When tapetal pigment is present, its color dominates the color of a given animal's reflex. Tapetal color loosely follows coat color. For example, black coats and green reflexes tend to go together. Most dogs and cats show a blue reflex as their eyes mature in the first 6-8 months of life. Pigment-poor animals like blue point Siamese cats with no tapetal pigmentation show a red reflex for the same reason humans do."
Hope this is useful/helpful/just interesting!

Adobe Creative Cloud (Desktop) does not work properly. The application is blocked : it could not be launch neither stopped. I'm on MAC Yosemite OS, does anyone know how to remove it properly or to force its stop. It does not appear in the launched applica

Adobe Creative Cloud (Desktop) does not work properly. The application is blocked : it could not be launch neither stopped. I'm on MAC Yosemite OS, does anyone know how to remove it properly or to force its stop. It does not appear in the launched applications.

I received no error message. The application was just trying to find applications unsuccessfully.
I am using MAC OS 10.10.1
I tried to uninstall the application but it seems that a kind of deamon is still installed thus providing me to reinstall properly. Do you know where are the elements to remove in order to get my machine just like before ?
Otherwise I would have to reinstall everything and this would be a pain.
Thanks for your help.

After update to IOS 4.3.5 my Iphone incoming and out going calls is not working properly and I have to remove the SIM regulerly to conduct or receive a call

after update to IOS 4.3.5 my Iphone incoming and out going calls is not working properly and I have to remove the SIM regulerly to conduct or receive a call
It is not practicale to do this always any one faces the same problem

There may be a problem with the SIM card. Get a new SIM card from your carrier - there should be no charge for a replacement.
If no change with a new SIM card, the standard troubleshooting steps in order are:
Power your iPhone off and on.
An iPhone reset, which is done by pressing and holding the home button and the sleep/wake or on/off button simultaneously until you see the Apple logo and then release.
Restore your iPhone with iTunes from your iPhone's backup.
Restore your iPhone with iTunes as a new iPhone or not from your iPhone's backup.
If no change after any of these steps in order, your iPhone has a hardware problem.

Accidentally removed from,sharing and permissions the admin user,and now i do not when i find the home icon at my computer i do not have permmission,and the mac does not works properly,lots of question mark at the dock ,please help

accidentally removed from,sharing and permissions the admin user,and now i do not when i find the home icon at my computer i do not have permmission,and the mac does not works properly,lots of question mark at the dock ,please help

I'm going to assume that since you deleted your hard drive and all its files, you had a backup, yes? If the backup has an OS (bootable clone), then you can boot into it by holding down the option key when you start up you iMac and choose the backup drive. Then use Carbon Copy Cloner or Super Duper to copy the files back to your iMac.

I am new to mac air. Today i installed (unsuccessfully!) MAPLE16 on my mac book air. Now since it does not work properly (it also does not appear in applications) i decide to delete it. I could not remove it from launchpad . i need urgent help

i am new to mac air. Today i installed (unsuccessfully!) MAPLE16 on my mac book air. Now since it does not work properly (it also does not appear in applications) i decide to delete it. I could not remove it from launchpad . i need urgent help from your side.

Any third-party software that doesn't install by drag-and-drop into the Applications folder, and uninstall by drag-and-drop to the Trash, is a system modification.
Whenever you remove system modifications, they must be removed completely, and the only way to do that is to use the uninstallation tool, if any, provided by the developers, or to follow their instructions. If the software has been incompletely removed, you may have to re-download or even reinstall it in order to finish the job.
I never install system modifications myself, and I don't know how to uninstall them. You'll have to do your own research to find that information.
Here are some general guidelines to get you started. Suppose you want to remove something called “BrickMyMac” (a hypothetical example.) First, consult the product's Help menu, if there is one, for instructions. Finding none there, look on the developer's website, say www.brickmyrmac.com. (That may not be the actual name of the site; if necessary, search the Web for the product name.) If you don’t find anything on the website or in your search, contact the developer. While you're waiting for a response, download BrickMyMac.dmg and open it. There may be an application in there such as “Uninstall BrickMyMac.” If not, open “BrickMyMac.pkg” and look for an Uninstall button.
You generally have to reboot in order to complete an uninstallation.
If you can’t remove software in any other way, you’ll have to erase and install OS X. Never install any third-party software unless you're sure you know how to uninstall it; otherwise you may create problems that are very hard to solve.
You may be advised by others to try to remove complex system modifications by hunting for files by name, or by running "utilities" that purport to remove software. I don't give such advice. Those tactics often will not work and maymake the problem worse.

Eye Dropper tool in After Effects Not working Properly

I am using Adobe After Effects CS5 on a mac. And most all of the eyedropper tools in the software are not working properly. They always select a way different color than it should be. What is wrong?
One day they just all decided to not work. Its really frustrating. Its been a few weeks now.

Well, For some strange reason its working just fine today. I did restart my computer yesterday and after that it seems to be working.
I haven't recenitly messed with my hardware acceleration/graphics card or monitor color profile. So if that was it, then it did it on its own.
None the less its working now. Thank you for your help!!!

Red Eye removal tool bug

Hi everybody,
I have a big problem using the red eye removal tool:
When trying to select the area around the eye to correct, LR randomly creates a selection rectangle of a different size and at a different location.
Does anyone have the same problem?
Example:
+ I activate the red eye removal tool
+ I drag the cursor to create a selection around the red eye to correct, taking care to have the center of the rectangle more or less in the red area of the eye
+ Release the mouse button
+ the selection rectangle disappears for a split second and appears again at a different location, for example around the eye brow or somewhere under the eye in a 20-30 times smaller size than what I selected.
Is this a failed attempt of artificial intelligence to properly recognize the area to correct or simply a bug?
BTW. the file in question is a JPG, with 2 people, red eye correction worked fine on 3 of the eyes (selection rectangle stayed where I created it) and fails on every attempt on the fourth (LR restarted and so on).

The red eye tool works by selecting the whole eye not just the pupil. If it still does not work try lightening or darkening the image to gaiain some more colour. If that does not work you can clone form one of the eyes that has worked.
Hope this helps you out.........

Satellite Pro U200: VGA output not working properly when AC adapter was connected

Hi,
I have a problem with vga output. When I'm working on battery and connect my notebook to external monitor it's ok, but when I connect AC adaptor then start waving also bluetooth and wlan does not work properly. In other case when I remove battery from notebook and connect AC adaptor it works properly.
thanks in advance

As long as you use a CRT you should set the refresh rate new, at least 85Hz. Standard is 60Hz as far as I know, and that hurts in your eyes.
The wireless lan behaviour is quite normal as long as your not right next to the access point. On battery power the wireless lan card reduces its energy consumption thus the connection will be poor if you dont have a perfect signal. You can turn this off in the iNTEL Pro/SET wireless software, where you can configure the adaptor. Try to change the powersafe mode to manual and full power, this should solve your problem.

Browser is not working properly

default browser is not working properly .....
closed on few second !!!!!!!
what the solution?

Hi and Welcome to the Community!
Anytime random strange behavior or sluggishness shows up, the first thing to try is a proper reboot:
Pre-BB10 Devices ONLY. With power ON, remove the back cover and pull out the battery. Wait about a minute then replace the battery and cover. Power up and wait patiently through the long reboot -- ~5 minutes.
BB10 Devices. Hold the top button down until the counter reaches zero. Wait for the device to be fully shut down (e.g., nothing at all displayed on the screen, no LED lights, etc.). Hold the top button until the red LED is lit. Wait through the full boot-up process. If this fails, you can attempt the battery-pull method above, but it is normally NOT recommended unless nothing else works.
See if things have returned to good operation. Like all computing devices, BB's suffer from memory leaks and such...with a hard reboot being the best cure.
Good luck!
Occam's Razor nearly always applies when troubleshooting technology issues!
If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
Join our BBM Channels
BSCF General Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

BUG: Red Eye Removal on JPGs + Auto commit to XMP

There seems to be a bug in 1.3.1 when using the Red Eye Removal tool on JPGs and auto commit metadata to file option is selected:
Can anyone confirm?
This is what I've written to Adobe in a bug report:
******BUG******
Concise problem statement:
When using "Red Eye Removal Tool" on jpgs and in File->Catalog Settings->Metadata the option "Automatically write changes into XMP" is selected this will end up in a loop reading and writing metadata. The picture is always in status: "checking metadata". "Metadata Date" of file is changing from time to time because Lightroom is always saving metadata to file (modified date of the jpg file itself also changes, so something is written to file).
Steps to reproduce bug:
1. in File->Catalog Settings->Metadata check option "Automatically write changes into XMP"
2. select a JPG picture and go to Develop Module
3. use the Red Eye Removal Tool
Results:
Endless loop by Lightroom trying to save this change into Metadata of JPG file
Expected results:
Either it is not possible to store this change in metadata: then don't touch the file.
Or it is possible, then this needs to be fixed so it is written/read correctly from file.

The red eye tool works by selecting the whole eye not just the pupil. If it still does not work try lightening or darkening the image to gaiain some more colour. If that does not work you can clone form one of the eyes that has worked.
Hope this helps you out.........

Red Eye Removal not working properly

Similar Messages

Maybe you are looking for