Red flashes created during transcode process

Hi everyone,
Does anyone know why my one frame red flashes are being created during the transcode process of my DVD's? When i watch my files ready to create the DVD there are no red flashes and the file plays fine. When i create the DVD with menus etc and watch it back there are no red flashes and it plays fine. As soon as the file is transcoded, whether as part of the burning process, or during DVD creation, these one frame red flashes appear . I have watched the films on different players and they are burnt onto the final disc image. I have tried a whole host of transcode settings whether 1 pass cbr, 2 pass vbr, 25i or 25p, working to 4, 7 or 8MB. It does not make any difference. The red flashes persist!
Any ideas?
Cheers, Ruth

Start with the SEARCH link http://www.adobeforums.com/webx?126@@.1de98ec0
Enter
red flash
or
red frame
Lots of reading and possible causes

Similar Messages

  • CS4 Encore keeps freezing during transcoding process.

    I'm using CS4 and trying to make a DVD that is 30 minutes long using Encore. It keeps freezing after about 5 minutes during the transcoding process and seems to always freeze at the same spot according to the progress bars.  I don't get an error message...it just stops and has to be forced to close.  Shorter videos seem to go through just fine as long as they are not over 12 minutes long.  Any ideas?  System is running Intel i7 975, 20gb ram, 2gb ddr5 Radeon video card.  I've made longer videos in the past...this is a new issue.

    >this is a new issue
    Some general things to try
    Run as Administrator http://forums.adobe.com/thread/969395 (Encore AND PPro)
    Odd Errors http://forums.adobe.com/thread/670174
    Long File Names or odd characters cause problems
    Read http://forums.adobe.com/thread/588273
    And #4 http://forums.adobe.com/thread/666558
    And This Message Thread http://forums.adobe.com/thread/665641

  • PSE9: Second 'My Pictures' gets created during Restore process

    I'm running PSE9 on Win7.
    I've been doing some Restore Catalogs to move my PSE from an old pc to this new one.
    My old pc was Win XP.
    I've noticed that the Restore process creates what looks like a second 'My Pictures' folder
    in my folder structure. Inside this My Pictures there is an Adobe folder which has an Other Pictures folder.
    All of these folders are empty.
    All of my images go into a second 'My Pictures' folder. I'm puzzled why I'm getting this extra
    My Pictures folder. I thought it might have something to do with Homegroup. The icon for the folder
    looks a little different than the other folder. Anyway, I believe I have disabled the Homegroup feature.
    Thanks for any help of advice!

    OK.
    It looks like it is something that comes with the Library support in Win7.
    'My Pictures' seems to be a label. The actual directory node comes out
    as 'Pictures'.
    I removed the 'Public' directory from the Library for Pictures.
    And customized the look of Windows Explorer so that I see what I want
    to see now.
    Thanks!

  • No PSWCLIEnvironment file created during installation

    I've installed SUNWisw and the PSWCLIEnvironment file was not created during the process.
    Could anyone tell me what data the file contains as I have to create it on my own?
    Tried reinstalling with the same effect.
    I'm installing the following version: isw.6.0.sp1.solaris.sparc

    Did you previously had Firefox installed?
    The Firefox 4 RC version is a regular release and will replace the current Firefox entry in the Start menu even if you do a custom install (haven't tested this, so I might be wrong). You can easily create a new entry in the Start menu yourself if it is missing by dragging the desktop icon to the start menu or by using Windows Explorer to create a folder structure in "C:\Users\All Users\Start Menu\Programs\Mozilla Firefox" if that folder is missing.

  • Create debit entry in DFKKOP during Return processing

    Hi,
    I have a requirement where an debit entry with particular main/sub needs to be created in DFKKOP during return processing. Can anyone have idea how we can approach for this requirement? Any FQEvent and FM/BAPI for debit entry creation.
    Thanks in advance,
    Murtuza

    Let me explain the exact requirement. Actually this requirement is a suggested solution of the below issue.
    In our system, there is an extra charge called NC charges along with consumption for selected accounts.
    So with consumtion line item in DFKKOP, there is NC line item having main/sub for example as 999/S*
    Now payment is made with full amount (consumption + NC charge), then system clears both consumption+NC items with payment and also creates one more line in DFKKOP with main/sub as 999/A* having the exact amount of 999/S* item. (I dont know the reason for this logic and how it is implemented)
    Issue comes when Return is processed for the above payment. It removes clearing status of consumption+NC items and clears payment document with return document. But here is fails to create debit entry for 999/A* item (as it was created extra with payment). So my requirement is to create this line during Return. Otherwise it shows reconciliation difference during G/L posting for NC business unit.

  • Exception During Transcoding: unrecognized fill type

    I'm running Flex 2.0.1 with HotFix 3. and everytime I output
    any SWF from Flash, whether it be Flash 9/AS3 or Flash 8/AS2, and
    try to embed it into my Flex Application I get an "exception during
    transcoding: unrecognized fill style type: 19" error. I've tried
    embeding the symbol that I want as well as embedding the entire
    swf. I've noticed that when I change the fill type from Gradient to
    Solid the style type goes from 19 to 255.
    Is this a bug with the flex compiler?

    I'm on Mac OSX Snow Leopard and I have the Adobe CS4 Master Collection updated to latest. I was using DVD Studio pro for a short project and I started to recreate the whole thing in Encore CS4 as I had more flexibility with Photoshop based menu system for the DVD.
    I have a simple menu system created in Photoshop with the corresponding (+) naming for the layers. My menu has 4 text buttons, 1 logo layer and a background. I left all the text as text, didn't rasterize the text. ( I tried that after the crashes but with same bad result)
    In Encore CS4 I imported the PSD file as a Menu Asset. I set up a video asset to loop as the background, and an audio asset to play.
    I have 4 timeline assets with short videos.
    I connected each button to the apropriate timeline to play.
    At the end of each timeline I set up to go back to the Menu.
    The Menu is set to Firts Play.
    That't it.
    When I go to Build I hit the Check Project and it tells me that I have 2 Orphan Menus. Now when I try to click on them Adobe Encore CS4 Crashes.
    If I don't click on them and I hit Continue with Building, it starts transcoding but after a few minutes of trasncoding it crashes.
    I found a long thread about the Orphan menu BUG Crash, but I didn't found a solution. I cleared my cache, I recreated the menu with rasterized text, but crashed again. I created a new menu system with buttons taken from the Library, the Orphan menu was not there anymore at Check Project, and the transcoding was building ok, but then after 30 minutes of trasncoding it crashed again.
    Please help as I am frustrated with Encore CS4!!
    Imre

  • How do I restore backup swm files created during system recovery from external hard drive

    Good day,
    I was facing some problems with my laptop (HP Envy 17 3D Notebook with windows 7 home premium, 64 bit) and I had to return it back to its original state using system recovery.
    During the process I was asked if I want to back up my data. I have chosen to backup my data in the flash drive. Once the process has completed and my laptop is to the original state, I tried to recover my backup but it tells me:
    The version of this file is not compatible with the version of windows you're running. Check your computer's system information to see whether you need an x86 (32-bit) or x64 (64-bit) version of the program, and then contact the software publisher.
    If i click run as administrator it tell me:
    Windows cannot find 'F:\Backup_2015-04-29 143842\Restore.exe'. Make sure you typed the name correctly, and then try again.
    there are files labeled like backup.swm, backup1.swm, backup2.swm. I can't open these files or do anything with them. In a text document it lists all the files it apparently copied. It is only a list of text, nothing else.
    any help will be greatly appriciated.

    Hi @Jef35,
    Welcome to the HP Forums!
    It is a superb  place to find answers and information!
    For you to have the best experience in the HP forum I would like to direct your attention to the HP Forums Guide Learn How to Post and More
    I understand that while doing the recovery back to factory you opted to backup your personal files  and would now like to know how to restore them .
    Here is a link to  HP PCs - Restoring Files that were Backed Up Using HP Recovery Manager (Windows 7)
    If you appreciate my responding, please click the kudos button below to say thanks.
    If this resolved your difficulty please select solution provided to enable other posters to locate this information more easily.
    I hope this helps
    Sparkles1
    I work on behalf of HP
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos, Thumbs Up" on the bottom right to say “Thanks” for helping!

  • CRM 2011+An error has occurred during report processing. (rsProcessingAborted)

    Hi,
     i have installed CRM 2011 on-premise version in Server A. Database and CRM 2011 Reporting Extenison in Server B. Both the server are 64 bit server and IIS 7.0 . i can able to browse the Report server url. USer as been added in Sql DB Logins and
    as permission to Reportserver and ReportservertempDB.
    i can able to access the CRM Reports only using Admin Credenttials that is from the credential which Report server is installed and configured
    Error in server 1: 
    Web service request SetDataSourceCredentials to Report Server
    (http://servername/Reportserver_XXXSQLSRVR)failed with SoapException. Error: An error has occurred during report processing. (rsProcessingAborted).
    Error in Server 2: took this error From error log file
    processing!ReportServer_0-1!7e4!03/16/2011-10:34:51:: e ERROR: Data source 'CRM': An error has occurred. Details: Microsoft.ReportingServices.ReportProcessing.ReportProcessingException: Cannot create a connection to data source 'CRM'. ---> Microsoft.Crm.Reporting.DataExtensionShim.Common.ReportExecutionException:
    Caller S-1-5-21-1587242514-2812063576-513219026-1110 has insufficient privilege to run report as user 9f69b98c-c73d-e011-bd85-842b2b6567dd
    processing!ReportServer_0-1!7e4!03/16/2011-10:34:51:: e ERROR: An exception has occurred in data source 'CRM'. Details: Microsoft.ReportingServices.ReportProcessing.ReportProcessingException: Cannot create a connection to data source 'CRM'. ---> Microsoft.Crm.Reporting.DataExtensionShim.Common.ReportExecutionException:
    Caller S-1-5-21-1587242514-2812063576-513219026-1110 has insufficient privilege to run report as user 9f69b98c-c73d-e011-bd85-842b2b6567dd
    processing!ReportServer_0-1!7e4!03/16/2011-10:34:51:: i INFO: DataPrefetch abort handler called for Report with ID=. Aborting data sources ...
    processing!ReportServer_0-1!7e4!03/16/2011-10:34:51:: e ERROR: Throwing Microsoft.ReportingServices.ReportProcessing.ProcessingAbortedException: An error has occurred during report processing., ;
     Info: Microsoft.ReportingServices.ReportProcessing.ProcessingAbortedException: An error has occurred during report processing. ---> Microsoft.ReportingServices.ReportProcessing.ReportProcessingException: Cannot create a connection to data source 'CRM'.
    ---> Microsoft.Crm.Reporting.DataExtensionShim.Common.ReportExecutionException: Caller S-1-5-21-1587242514-2812063576-513219026-1110 has insufficient privilege to run report as user 9f69b98c-c73d-e011-bd85-842b2b6567dd
    Eventvwr error in server 2:
    Failed to unload app domain DefaultDomain. The following exception occurred: Error while unloading appdomain. (Exception from HRESULT: 0x80131015).
    I tried the Following ways to fix it
    1.added User as content manager
    2.In CRM apppool i have Admin in identity column
    its really paining when i'm unable to access the CRM 2011 Default Reports. got stucked for a day.
    Thanks, Saraswathy Kumaravelu

    Hi All,
    I encountered this same issue today after installing CRM 2011.
    CRM 2011 on Server A
    SQL and SSRS 2008 R2 on Server B
    I found that I got the same errors described here when running the standard reports even after I had installed the Reporting Extension (CRM 2011 replacement for CRM 4.0 Data Connector). The reason I got the error was because the 'Data Source Type' had not
    been updated in Report Manager.
    Here's how I resolved:
    1. Browse to Report Manager (http://SERVERB/Reports)
    2. Open the Organisation_MSCRM folder
    3. Click Show Details
    4. Open the MSCRM_DataSource
    5. Change the Data Source Type from Microsoft SQL Server
    to Microsoft Dynamics CRM SQL
    *Note: - This option is only available once Reporting Extension has been installed on SSRS Server.
    6. Clear the contents of the Connection String box
    7. Set the Connect Using: option to Credentials Supplied by user running the report
    but do NOT check the
    Use as Windows Credentials when connecting to the DataSource option.
    8. Click Apply
    9. Restart the SQL Reporting Services Service in
    Reporting Services Configuration Manager
    10. Test by running one of the Standard CRM Reports (e.g. User Summary)
    Ta Da!! - Success!!
    Hope this helps!

  • [Forum FAQ] Troubleshooting "An error has occurred during report processing" message when viewing SCCM reports

    Symptom:
    When you view a report with SCCM, you may encounter the following error message:
    An error has occurred during report processing.
    Under the details box, you can see the detailed error information as below:
    System.Web.Services.Protocols.SoapException: The report server has encountered a configuration error. Logon failed for the unattended
    execution account. ---> Microsoft.ReportingServices.Diagnostics.Utilities.ServerConfigurationErrorException: The report server has encountered a configuration error. Logon failed for the unattended execution account. ---> Microsoft.ReportingServices.Diagnostics.Utilities.LogonFailedException:
    Log on failed. Ensure the user name and password are correct. ---> System.ComponentModel.Win32Exception: The user name or password is incorrect
    at Microsoft.ReportingServices.Library.ReportingService2005Impl.GetReportParameters(String Report, String HistoryID, Boolean ForRendering, ParameterValue[] Values, DataSourceCredentials[] Credentials, ParameterInfoCollection& Parameters)
    at Microsoft.ReportingServices.WebServer.ReportingService2005.GetReportParameters(String Report, String HistoryID, Boolean ForRendering, ParameterValue[] Values, DataSourceCredentials[] Credentials, ReportParameter[]& Parameters)
    Figure 1 is the screenshot of the error message in SCCM:
    Figure 1.
    Cause:
    According to the detailed error message, it indicates that “The report server has encountered a configuration error. Logon failed for the unattended execution account.”
    and “The user name or password is incorrect”, so this issue would be caused by the mismatched credential stored in report server.
    Solution:
    To solve this issue, you can follow the steps below:
      1.
    Access Report Manager URL on your reporting server.
    From figure 2, you can see that the URL for Report Manager is
    http://SCCM:80/Reports
    in our lab environment. You can check your Report Manager URL in Reporting Services Configuration Manager.
    Figure 2.
      2.
    Find out the date source {5C6358F2-4BB6-4a1b-A16E-8D96795D8602} and access it.
    Figure 3.
    3. Test connection (Figure 4)
    You can have a test connection to check whether the credentials stored in the report server are correct or not.
    Figure 4.
    4.
    Modify the password or choose another authentication method
    If you want to change the password, please make sure that password is the same as the one that you have set for that user account in the domain.
    5. Confirm connection
    After you change the password, you can test connection again. From figure 5, we can see that connection created successfully.
    Figure 5.
    After all the steps above, there is no error message when viewing the report. (Figure 6)
    Figure 6.
    Please click to vote if the post helps you. This can be beneficial to other community members reading the thread.

    ok . the user name is sccm.admin this user have the assignment to run as a services, he is a domain admin, on the sql server this user have the sysadmin, i create the reporting with the Reporting Services Configuration Manager, and on the Database i use
    the sccm.admin to create the new database, on the Service Account i use sccm.admin user, also this user have local administrator on the SCCM server, + i give him the dbreader on All the database on the SCCM server witch it also the SQL server, i add the sccm.admin
    on the reporting web the system role and check the all settings give him full permissions
    do i make my self clear ? (my English is not so bright )
    now from the SCCM 2012 console , some reports run perfectly, and some run and trow this error at me
    Microsoft.Reporting.WinForms.ReportServerException
    An error has occurred during report processing. (rsProcessingAborted)
    Stack Trace:
       at Microsoft.Reporting.WinForms.ServerReport.ServerUrlRequest(Boolean isAbortable, String url, Stream outputStream, String& mimeType, String& fileNameExtension)
       at Microsoft.Reporting.WinForms.ServerReport.InternalRender(Boolean isAbortable, String format, String deviceInfo, NameValueCollection urlAccessParameters, Stream reportStream, String& mimeType, String& fileNameExtension)
       at Microsoft.Reporting.WinForms.AsyncMainStreamRenderingOperation.RenderServerReport(ServerReport report)
       at Microsoft.Reporting.WinForms.AsyncRenderingOperation.PerformOperation()
       at Microsoft.Reporting.WinForms.ReportViewer.AsyncReportOperationWrapper.PerformOperation()
       at Microsoft.Reporting.WinForms.ProcessingThread.ProcessThreadMain(Object arg)
    this poor gay have the same problem
    An error has occurred during report processing. (rsProcessingAborted)

  • Looking for quick creation of a new contact during activity processing

    We are looking for a quick way to create a new contact during the process of activity management.  Once I have selected my business partner and then I search for a contact, if the contact I need does not exist yet there are several long involved ways to go create the new contact.  Several people from SAP have alluded that there is an add button that should be available on the business partner central search window that comes up when you look for contacts but we have no add button.  Does someone know if the add button becomes available later?  We are on CRM 5.0  - has anyone customized a way to add a contact here without having to go into the account application relationship tab.  We are coming off of Mobile Sales where there is a pop up window to add a contact. We need to replace this functionality.

    Hello Pascale,
    "Follow-up" button is present to enable a quick creation of follow up.
    That is end user can just input those limited fields, and click on this button to create the document without going into the detail.
    And at the same time, standard IC do provides another link to the detailed follow up documents to enable user add more detail.
    The link "Follow-up Details" can realize such purpose and should be the one you are asking for.
    The steps are:
    - select the transaction type in the drop down;
    - click on "Follow-up Details" link, this lead to another page of the detailed activity creating, only at this time the activity is being created;
    - click on the Back button without save, you will return to the previous screen, and get the link in Activity Clipboard for future access;
    Hope I have understood your requirement correctly!
    Hongyan

  • Red Flashes in footage

    Hello All,
    I'm having an issue where footage has completely random frames that are completely solid red.  I was working with raw MXF wrapped files that are 1080p from a sony F5 so I thought it I might need to transcode.  So I transcoded everything to Pro Res 422 (LT).  The flashes are still there but in different places in the clip.  The frames that were competely red are now fine but other frames in the clip are now solid red.  Upon re-transcoding the exact same clips the red frame are always in different seemingly random places in the clip.  Ranging from 1-5 flashes per clip for all my footage.  I imagine I'm dealing with some form of corrruption here but the frames that are lost or corrupted should theoretically be consistent right?  How could frames that are lost magically reappear upon re-transcoding?  I'm a bit stumped.  The raws are stored in DMG's. This a problem prevelent throughout the footage not just one card.  (There are 5 dmg's from 5 transfers from SxS cards.  Not sure how many cards were used on set.  Help is much appreciated.  I was transcoding in Media Encoder.   Premiere CC 2014 8.0.0   Thanks. 

    I've had this problem too on a PC using AVCHD video.   I tried transcoding it in Prelude, which helped but I still had one instance of it happening.  I don't recall this ever happening until recently. 
    I have 2 cameras, a Panasonic HMC150 and an AF100.  I've got the red-frame problem twice and both times it was with the af100 shooting in interlaced mode (its never happened in progressive.  Might be a coinsidence, don't know for sure.

  • An error has occurred during report processing. (rsProcessingAborted)

    Access Web Databases and SSRS
    Issue:
    After creating an access web database, such as Contacts Web Database in SharePoint 2010 we receive the following error when trying reports. This only happens on the Address Book, Phone Book, and Contact List reports. The Contact
    Details and Printable Labels reports both work. The reports do not begin to error until data is added to the database (no errors initially).
    I have duplicated this across all of our environments with the same results and get similar results when adding a Projects Web Database.
    Environment:
    Prod:
    3 WFE Servers – SP 2010 sp1
    3 App Servers – SP 2010 sp1
    2 SQL Servers – 2012 sp1
    QA:
    3 WFE Servers – SP 2010 sp1
    3 App Servers – SP 2010 sp1
    2 SQL Servers – 2012 sp1
    DEV:
    1 WFE/App Server – SP 2010 sp1
    1 SQL Server – 2012 sp1
    Background
    SSRS was installed following recommended guidelines and can be verified to be working. http://blog.helloitsliam.com/Lists/Posts/Post.aspx?ID=66
    Error full text
    Microsoft SQL Server Reporting Services
    An error has occurred during   report processing. (rsProcessingAborted)
    The Group expression for the grouping ‘Group1’ contains an   error: Request for the permission of type   'Microsoft.Office.Access.Server.Security.AccessServicesPermission,  
    Microsoft.Office.Access.Server.Security, Version=14.0.0.0, Culture=neutral,   PublicKeyToken=71e9bce111e9429c' failed. (rsRuntimeErrorInExpression)

    Found the answer
    here.
    In short, SSRS 2012 installation missed a couple of config entries.  You'll have to add them yourself:
    Open C:\Program Files\Common Files\Microsoft Shared\Web Server Extensions\15\WebServices\Reporting\rsreportserver.config.  Search for the <Data> tag and add this entry:
    <Extension Name="ADS" Type="Microsoft.Office.Access.Reports.DataProcessing.AdsConnection, Microsoft.Office.Access.Server.DataServer, Version=14.0.0.0, Culture=Neutral, PublicKeyToken=71e9bce111e9429c" />
    Open C:\Program Files\Common Files\Microsoft Shared\Web Server Extensions\14\WebServices\Reporting\rssrvpolicy.config.
    Search for <NamedPermissionSets> and add this entry:
    <PermissionSet
    class="NamedPermissionSet"
    version="1"
    Name="ReportExpressionsDefaultPermissionSet">
    <IPermission class="SecurityPermission" version="1" Flags="Execution" />
    <IPermission class="Microsoft.Office.Access.Server.Security.AccessServicesPermission, Microsoft.Office.Access.Server.Security, Version=14.0.0.0, Culture=neutral, PublicKeyToken=71e9bce111e9429c" version="1.0" Flags="CalculationCallback" />
    </PermissionSet>
    In the <CodeGroup>node, around line 70, find and change PermissionSetName from “Execution” to “ReportExpressionsDefaultPermissionSet”

  • An error has occurred during report processing. (rsProcessingAborted). Query execution failed for dataset 'DimUserWorkCentre'. (rsErrorExecutingCommand). The Cube either does not exists or has not been processed

    Hi,
    I'm having issues with the report created using SSAS cube.
    An error has occurred during report processing. (rsProcessingAborted)
    Query execution failed for dataset 'DimUserWorkCentre'. (rsErrorExecutingCommand)
    The Operator_Performance cube either does not exist or has not been processed.
    I have searched through internet and tried all the solutions, but didn't worked for me.
    SSRS services running as NETEWORK SERVICE user.
    SSRS Execution running as a Different user, which is the login is used to logon ot that server. I have also verified this user has access to database. I'm using Shared DataSource(SSAS Source) for this report.
    Can any one please help me.
    Thank You,
    Praveen.
    Praveen

    Hello,
    Have you tried it to execute on report manager , Is your data source properly configured in Report Manager  and your report is mapped with Datset correctly?
    Have you executed the Dataset query MDX editor  now?
    What is the volume of data you are fetching in the report. Try it to execute in other than IE , I don't know the exact reason but some of our report with large volume of data  are failing on IE , on the other hand these reports are running fine Google
    Chrome
    blog:My Blog/
    Hope this will help you !!!
    Sanjeewan

  • Error occurred during WM processing for posting change delivery

    Hi Experts,
    I am getting the following error when i try to create Outbound delivery aginst PO.
    "L9 612 Error occurred during WM processing for posting change delivery"
    Diagnosis
        The indicator AUFER from the delivery type contradicts the
        storage location constellation that was determined by the
        WM system.
        TVLK-AUFER = '<VAR2>'
        WM = '<VAR1>'
    1.Purchase order is Stock transport order ME21N ( UB)
    2.Try to create Outbound using VL10B and i am getting the above error,
    Thanks in advance.
    Cheers...Gopi

    Hi Gopi,
    Looking at problem you discribed, I am assuming you are using the delivery type other than "NL".
    The reason for this error is the indicator "order required" in delivery type defination set to 'X : sales order required' and you have assigned this delivery type to the purshasing document UB in STO customising. So the requirement of delivery defination of having prior document as sales order is conflicting.. so the error is there.
    Resolution:
    Please change the assigned delivery type to NL to purchasing document type UB in SPRO> MM> Purchase order>set up for STO>assign delivery type and checking rule.
    If you have custome delivery type the go to spro> LE> shipping>deliveries>define delivery type
    change the order required from X to "B".
    Hope this will help.
    Regards,
    Sudhir

  • PLEASE HELP ! While updating My Xperia Z1 , my pc hanged during the process and .

    While updating My Xperia Z1 , my pc hanged during the process ( so , installation of update was interrupted , guess it's same as getting your USB connection disconnected )and now the phone won't turn on .
    Its shows the Sony Xperia logo , then shows a black lit screen , and that's it , nothing else happens . I can only turn it off by pressing and holding the power+up volume button , but it turns on automatically if plugged in for charging or in PC only till it gets that black screen .
    I tried to flash it with a flashtool (Emma) , but it says phone locked , but since it can't even be turned on , i can't unlock it .
    It's a store bought phone and is not of any contracts with any mobile service provider or anything like that ....
    Funny you know ... my PC had to crash at the moment i was updating it .... my luck ....
    Anyways , now please can anyone tell me what i can do ? I'm sure there is a way i can fix it using my pc and other downloadable software , so please can some one help me how i can fix this problem ? I don't care if i lose all the data on it , i just want my phone back ....
    Solved!
    Go to Solution.

    Problem Solved ,Thank you  very much !! 
    For those who might face the problem and stumble upon this thread after googling  
    Read above mentioned comments 
    Now here's what I did :
    Turned the phone off by power+volume key method , then plugged it in to the pc via USB and opened sony pc companion , entered Support zone , then entered the Update device option , then I Unplugged my device , only after doing this a window pops up with  Repair my phone/tablet in blue text , then i clicked on that and followed the simple instructions ..
    It's basically what Thommo said , only i was so freaked out at that time that i failed to follow his instructions to the letter  
    So now my phone is back to normal , and , it got the latest lolipop update !
    Problem solved i guess  but Thommo , i need to disturb you again with  just one more  question ,  since at the very beginning , the update process was interrupted , and now i got lolipop after  the repair ,without needing to update again ,  so has the lollipop been installed properly on my phone or do i need to use any other flashtool to re-install lollipop ? 
    again , Thank you ... 

Maybe you are looking for