Red flashing light and nothing else

My blackberry curve 9360 kept restarting then having a white background with app error 200. And now it has stopped that and nothing will appear on the screen and the led light just keeps flashing red what could I do to fix this?

courtneyannefox wrote:
My blackberry curve 9360 kept restarting then having a white background with app error 200. And now it has stopped that and nothing will appear on the screen and the led light just keeps flashing red what could I do to fix this?
Hi and Welcome to the Community!
To add to the above all-too-brief instructions, here is the official KB concerning the "200" error:
KB30100 "JVM 200" appears on the BlackBerry smartphone
But, what is likely now the problem is that your battery has run down flat, and you can't attempt any recovery until that is first remedied. So please try this sequence...note that, throughout the entire 4h15m process, your BB must remain connected to a known-good wall charger (not PC USB):
With the battery inside, connect your BB to the wall charger
Leave it alone for 2 hours, no matter what the LED or the display does
Remove the battery
Wait 15 minutes
Insert the battery
Wait another 2 hours, no matter what the LED or the display does
This has been known to "kick start" some BBs.
It is also possible that your battery or BB has experienced a problem...to test, this sequence is needed:
Obtain a known good and already fully charged additional battery...use it in your BB and see what happens
Obtain access to a known good and identical BB...use your battery in it and see what happens
The results of this will indicate if it's your BB or your battery that has the problem.
Good luck and let us know!
Occam's Razor nearly always applies when troubleshooting technology issues!
If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
Join our BBM Channels
BSCF General Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

Similar Messages

Red light and nothing else

Hi all,
I bought the BBZ30 2 days ago, everything was working fine and then I got an alert for a software update. During the update my phone switched itself off and all that is happening now is the red flashing light and nothing on the screen. The phone was fully charged prior to the update and I can't switch it back on. It has been like this for 12 hours.
Please help.

Hi and Welcome to the Community!
Please try this sequence...note that, throughout the entire 4h process, your BB must remain directly connected to a known-good wall charger (not PC USB, not a cradle):
Connect your BB to the wall charger
Leave it alone for 2 hours, no matter what the LED or the display does
Force a reboot by holding the up/down arrow keys together for at least one minute
Wait another 2 hours, no matter what the LED or the display does
This has been known to "kick start" some BBs.
If this fails, then somehow the OS update became corrupt during the process, and you will need to attempt a very forceful method of installing an OS to your device...AutoLoader:
http://supportforums.blackberry.com/t5/General-BlackBerry-Functions-and/Unlocking-your-BlackBerry-Gu...
Hopefully it will succeed. Good luck and let us know!
Occam's Razor nearly always applies when troubleshooting technology issues!
If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
Join our BBM Channels
BSCF General Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

Flashing apple and nothing else! help

We bought a mini for my daughter about 8 months ago. She got it for x-mas and is loving it. This morningshe went to turn it on and it wouldn't. It sits at night in her JVC sound thing (ring shaped) and charges. She uses it as a stereo in her room. The apple logo just flashes slowly. I can hear the drive inside trying to work and then it shuts down. IT just does that over and over. I tried to re-set it, restore it and everything else, but no luck. It does not recognize it on my imac, power mac or PC as even being attached. I have tried the fi-wi connection and the usb with no results. It was not dropped and was working fine when she went to bed. Please help her! Thanks so much!!

Check these out.
iPod only shows an Apple logo and doesn't start up.
iPod doesn't appear in iTunes or on the Mac desktop
iPod does not appear in iPod Updater or iTunes in Mac OS X
iPod appears on the Mac OS X desktop but not in iTunes.
I have to say that the hard drive noise you can hear may mean it needs service.

My power mac G5 won't boot up but has red flashing light and intense fan noise.

I Have a Power Mac G5 that flashes a red light that I've never seen before. There is nothing on the monitor and the fan noise is incredible.
HAs anyone ever had this problem?

Hi Michael,
It's normal for the fans to go full speed if the OS won't load to handle them.
Where is this red light, on the logic board, or front panel?
Can you count the beeps or flashes?
1 beep = no RAM installed
2 beeps = incompatible RAM types
3 beeps = no good banks
4 beeps = no good boot images in the boot ROM (and/or bad sys config block)
5 beeps = processor is not usable
In addition to the beeps, on some computers the power LED will flash a corresponding number of times plus one. The LED will repeat the sequence after approximately a 5-second pause. The tones are only played once.
Note: In this case, a flash is considered to be 1/4 second or 250 ms or greater in length.
http://support.apple.com/kb/HT1547
LED 1—CPU A: red—contact Apple or an Apple Authorized Service Provider
LED 2—Overtemp: red—contact Apple or an Apple Authorized Service Provider
LED 3—Power On: red—the main power is on
LED 4—Trickle: yellow—Power Mac G5 is plugged into the wall correctly
LED 5—Open Firmware good: green—no problem
LED 6—CPU B: red—contact Apple or an Apple Authorized Service Provider
LED 7—Checkstop: red—contact Apple or an Apple Authorized Service Provider

MiFi2200 has a red flashing light

MiFi2200 has a red flashing light and will not get a signal. When it's plugged into the wall, the button light flashes red. When I plug the device into the computer, Verizon manager doesn't detect the device.

wobbly214 wrote:
MiFi2200 has a red flashing light and will not get a signal. When it's plugged into the wall, the button light flashes red. When I plug the device into the computer, Verizon manager doesn't detect the device.
You may have discovered by now:
"Red Blinking The battery is critically low."
Leave it plugged in for a while.
The LED can be Green, Green/Yellow which the book calls Amber, or Red.
http://support.vzw.com/clc/devices/index.html?p=5607&m=
Device Manual
Clarence

HT1551 just updated my apple TV and whit light is flashing continuously and nothing is on the screen anymore.

Can anyone help with this please?
Just updated the Apple TV and the white light is now flashing quickly and nothing is on the screen. Can't access it with the remote from the Ipad.

Same problem here. Long time Apple fan, own lots of their products... Greatly disappointed.
Bought a brand new Apple TV, worked fine for 3 days but then the picture went blank (possibly after an auto update?) and I observed a quickly flashing white light on the Apple TV. Manual indicates this means it is "having problems" (no kidding) and recommends restoring the software via a micro-USB cable (cable not provided).
Acquired a cable and attempted this fix but after following the procedure the Apple TV never showed up in iTunes, so I'm unable to perform the restore. Returning the device today, not sure if we want to get another or just give up and save the $100.

Why does the color red change from working with images in develop to library? The color gets lighter and nothing shows a change on histogram but visually you can see it.

Why does the color red change from working with images in develop to library? The color gets lighter and nothing shows a change on histogram but visually you can see it.

That's probably a broken display profile. The conversion from Library's Adobe RGB is different than the conversion from Develop's linear ProPhoto, so if there's a problem with the display profile it can show up this way.
Recalibrate, or if you don't have a calibrator use sRGB. If your monitor is a wide gamut model use Adobe RGB.
Assuming Windows, change it in Control Panel > Color Management > Devices, and relaunch Lightroom so that it can pick up the new profile at startup:

Black screen red flashing light

Plz help.
Today my touch screen on my bb torch 9800 wouldnt work, I did a battery pull and now my phone wont switch back on. the screen is black and there is a red flashing light.
I have had my bb neary 18 months and never had a prob before.
Can you advise what i should do next,

Hi and Welcome to the Community!
Put your BB onto a known-good wall charger for 2 hours, and do not touch it. Then, with it still on that charger, remove the battery, leaving it out for 5 minutes (with the BB still on that charger!). Put the battery back in. If it boots up, leave it alone (still on the charger) for 5 hours to see if it will fully charge and function again.
Good luck!
Occam's Razor nearly always applies when troubleshooting technology issues!
If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
Join our BBM Channels
BSCF General Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

My ipad keeps showing the apple logo and nothing else and it wont restore it keeps coming up with error 19

I have an iPad 2nd generation and all it does is show the apple logo continuously and nothing else. I cannot get into the iPad and I have tried to restore it numerous times but it comes up with error 19 or error 14. Or it restores but after it has it just comes back up with the apple logo once again and nothing changes or it flashes a few times. does anyone know how to fix this?
Cheers Meg

You need to put your iPad into Recovery Mode. Follow the instructions in this Apple support document very carefully. It might take several attempts to get it to work.
If you can't update or restore your iPhone, iPad, or iPod touch - Apple Support

I have just tried to connect my Mac book pro to an LG Plasma TV via an iWires Mini DisplayPort to HDMI cable. All I get on my TV is the Mac wallpaper and nothing else. I am missing something really silly, could anyone help please.

I have just tried to connect my Mac book pro to an LG Plasma TV via an iWires Mini DisplayPort to HDMI cable. All I get on my TV is the Mac wallpaper and nothing else. I am missing something really silly, could anyone help please.

Hi there. I also bought an iWires mini Display port to HDMI cable and have an LG LED/LCD TV. I plugged it in to my MB Pro and followed the very small writing that came in the package and got both audio and video going. You need to change the audio settings from within System Preferences on your Mac to select your TV as the audio output.
My concern is the data latency - do you experience a delay between moving your mouse on the MBPro and the TV displaying the movement? It is only a fraction of a second, but certainly enough to be annoying, especially in a cable as expensive as the iWire.

I receive a Software Update notice that fails. How do I find out who/what is trying to update? How do I stop its attempt to update? The only response allowed is "OK". When OK is selected the window goes away and nothing else happens.

About once a month I receive the Software update notice that has failed. How do I find out who/what is trying to update? If I decided I want this update how do I allow it to continue? If I decided I do not want this update how do I stop it and its attempt to update? The only response allowed is "OK". When OK is selected the window goes away and nothing else happens.

Hi sharkbiscuit79,
Yes your cabinet 10 on the Crediton exchange has already been installed and linked with a FTTC DSLAM cabinet (making it able to provide FTTC fibre broadband) and has been Accepting FTTC orders since December 2013. PCP10 (with it's DSLAM cabinet within 100meters of it) is locate on the junction of Commercial Road and the A3072.
However by the looks of things your are just too far away to obtain a FTTC (VDSL2) connection, meaning FTTC fibre broadband is not available to you.
Have a look at the Connecting Devon and Somerset Considerations (particularly the last paragraph) - http://www.connectingdevonandsomerset.co.uk/where-when-map-conditions/
Your best bet is to talk to Connecting Devon and Somerset to see if there are any further plans to get a fibre based service to your area via https://www.connectingdevonandsomerset.co.uk/contact-us/ (as your area may not be inscope of any further deployment). Best give them your full address and landline number too as they can check if you are within a NGA area.
jac_95 | BT.com Help Site | BT Service Status
Someone Solved Your Question?
Please let other members know by clicking on ’Mark as Accepted Solution’
Try a Search
See if someone in the community had the same problem and how they got it resolved.

Everytime i go on Itunes it tells me i have to restore my ipod but everytime i do, it just tells me to do it again? When i try and use my ipod it just has a connect to itunes sign and nothing else, it wont work at all?

Everytime i go on Itunes it tells me i have to restore my ipod but everytime i do, it just tells me to do it again? When i try and use my ipod it just has a connect to itunes sign and nothing else, it wont work at all?
I updated itunes and everything but nothings working and i just can't figure it out?
Everytime i restore the stupid thing, it never pops up in my itunes again like its supposed to!

Loop
Maybe:
Restore loop (being prompted to restore again after a restore successfully completes)
Troubleshoot your USB connection. If the issue persists, out-of-date or incorrectly configured third-party security software may be causing this issue. Please follow Troubleshooting security software issues. .
Next try placing in DFU mode and then restoring.
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
Then try restoring on another computer.
Last, make an appointment at the Genius Bar of an Apple store.
Apple Retail Store - Genius Bar

Hi, I can't seem to get my ipod 32gb 4th gen to sync with itunes. It's brand new, but everytime I plug it in it says can't access Itunes store and nothing else happens. I enabled my firewall to allow itunes but it still can't access it. Please help.

Hi, I can't seem to get my ipod 32gb 4th gen to sync with itunes. It's brand new, but everytime I plug it in it says can't access Itunes store and nothing else happens. I enabled my firewall to allow itunes but it still can't access the store. Please help.

If you look at the feed, and look at the entry 'The end to an exciting field season in Aulavik National Park' you will see the line:
<pubDateFri, 29 Jul 2011 04:00:00 GMT</pubDate>
You have not closed the 'pubdate' tag - there should be a '>' as the 9th character. Because the tag has been left open, it invalidates everything which follows it, and thus the entire feed. iTunes therefore cannot read it, which is why the Store has not updated. Add the '>' and republish, and all should be well.
It's always worth checking your feed by subscribing manually, from the 'Advanced' menu, or by clicking the 'subscribe free' button on the Store page (both do the same thing) - if you can subscribe to the feed it should be OK.

Blue screen of death? I just updated my MacBook Air with the latest OX (25 Jun 11). When I restart - I get the Apple logo and then a blue screen and nothing else. Help!!!

Blue screen of death? I just updated my MacBook Air with the latest OX (25 Jun 11). When I restart - I get the Apple logo and then a blue screen and nothing else. Help!!!

Insert the install disk and press c on startup. Select your langauge then, if there's a menubar click utilities then click Disk Utility. If you didn't see the menubar continue with the installer until you see it.
Once in disk utitly select the drive and repair permissions.
After the repair is done, quit the utiltiy.
You can try to reboot and see if it works if you reboot, but if it doesn't repeat the same as before again.
Now you can continue with the installer and install the os.
Quit

HT1386 Why is not possible to sync just content like musice ONLY, when I have no time to wait on whole proces of synchronization, there SHOULD be a way to sync JUST MUSIC and nothing else, I dont wanna wait 10minutes to have 3 songs I want to have in my i

Dear Apple, why is not possible in the year 2014...sync to my iPhone just content I want to separety, without the whole sync procedur(backinup,syncing whole purchased things and stuff like that) When I want to have in my phone for example just 3 new songs ..I dont wanna wait 10minutes because of whole synchronization!!! I want add to my iPhone just these 3 songs thats it! Would be perfect, If you will make possible to sync just parts like MUSIC, Apps, Fotos, separetly and not alltime together...it s****!

Ok.
I have Windows OS and iTunes for PC, but the problem is not in my PC, but in synchronization. Your synchronization take minute or two, you have thunderbolt lightning cable??? If is it by you really so quick than ok but by me is it with sync really slow and I have still powerhouse notebook.
I dont know how is it possible that your sync is so quick, but my iPhone starts transfering purchased aplications and all content to the PC, instead of downloading it PC itself without iPhone from iStore. So there is what happend when I am conecting my iPhone.
When it find my iPhone on the first try, it starts makeing backup, than transfering photos, aplication, some info from Safari and to the end also the MUSIC...this should be improved by Apple and it should be able to sync just MUSIC section and not whole system, when I changed just something in MUSIC section(like adding new CD..)
So it does on PC whole resync Maybe is it somewhere in options, but where? I really want sync sometimes just MUSIC or just Apps and nothing else(like Photos, Bookmarks...)
I am sorry for that angry tone, but I am really stresedby this 20minutes sync or 10 miutes...just becouse of adding 1-2 songs, this is by competition phones quicklier :/ !
Message was edited by: Tenotitlan

Red flashing light and nothing else

Similar Messages

Maybe you are looking for