RED footage not showing up on external monitor (CS6)

Hello all,
When I select a RED clip (R3D) and place it in the source window to play it back. It does not show up on my external monitor. (via Blackmagic Intensity Pro).
However, it shows up once placed in the timeline.
This is a problem because when attempting to play footage back for my client, they can not see the image.
Thanks!
- Ryan

I have cs6 but dont have BM card and dont do what youre doing on set etc... but have worked on sets a lot and if youre trying to show producer, director, client ...stuff.... fast.... the best thing is just to do what works fastest... IMO you should just dump your clips into a sequence ( call it previews or something )... timeline and play the stuff so the program monitor is getting the and in turn going to your external monitor.. You can also ( at that point.. on timeline ) decide what to do with fast color correction type stuff ( looks etc ).... so they see something at least close to what they wanna see....
The source monitor has traditionally been a way to set in out points to sorta do a quick edit of what you wanna use... and drop that into timeline from there...it was never intended to be a program monitor...and thats what BM is also dealing with.
good luck..

Similar Messages

Color Corrector's Frame Viewer Split Not Showing Up On External Monitor

Kind've a long title - sorry - but . . . here's my question:
Why am I not able to see the Frame Viewer's split on my external monitor?
A further, more detailed explanation of the problem:
I recently purchased Ripple Training's Color Correction with Andrew Balis. It's very, very imformative and I think will help a lot when it comes time to begin color correcting the feature I'm working on. The section I'm on shows the Frame Viewer tab in the Tool Bench window that presents itself when one opens Color Correction under the Arrange area. In other words, Arrange>Color Correction sets up your windows for color correcting with your Viewer, Canvas, and Tool Bench windows aligned from left to right. When one opens up the 3 Way Color Corrector on a clip and makes a change in the clip, the Frame Viewer tab in the Tool Bench window will show a split screen where on one side you'll have your clip with the color correction you just did, and the other side un-color corrected. Isn't this (split) image supposed to show up in your external monitor just as the images in the Canvas and the Viewer?
That doesn't seem to be happening on my external monitor.
I'm not sure if this problem/issue I'm having is related to the muticlipl issue I posted in an earlier thread http://discussions.apple.com/thread.jspa?threadID=1330596&tstart=0
perhaps.
Any help on this issue would be greatly appreciated.
Thanks in advance,
Javier Calderon

Ahhh, Shane. So it's as simple as that? So then there's nothing wrong with my setup or my external monitor? FCP's just not designed to show the Tool Bench's Frame Viewer image in your external monitor? Wow . . . Well that answers that then I guess. And you're right . . . that IS indeed kind've lame . . .
Thanks.
Javier
. . . um . . . doesn't that kind've defeat the purpose of proper color correction then (regarding the Tool Bench's Frame Viewer anyway)? If the only place you can see your color corrected Frame Viewer split images is on a monitor that's NOT suited for color correction? Anyway . . . just a thought . . .

Clips not showing up on NTSC monitor when editing

I have a Sony DSR-11 and Sony NTSC monitor connected to my computer.The clips are not showing up on the monitor when I am editing. They show up when I am in Log and Capture. Is there anything I can do to get this to work again?
Thanks

Start with the basics.
View> video playback > apple firewire ntsc (or pal if you swing that way)
View> external video > all frames
View> external audio > audio follows video
View> refresh all devices
x

HT1338 the Macbook Pro would not even detect the external monitor.

My Macbook pro will not connect to an external monitor after moving it. It has been running on this same monitor for 8 months. I switched to a new Desk last night, after hooking it up, the Macbook Pro would not even detect the external monitor. It was only showing the Macs monitor in Display. It did not even have where you could "Detect Display" available. Is there an update that I may have missed. I have tested all the Monitor connections with another laptop they all work.

finally I would like to know if my computer falls under
http://support.apple.com/kb/TS2377
If nothing displays but you hear normal startup sounds, then it's possible this is a video issue, and you should take it to an Apple store or AASP.

My computer is not showing up in share monitor

Hi
I was happily creating and sharing files to Vimeo from Final Cut Pro x - When I had a kernal panic - Hard reset and now "My Computer" does not show up in share monitor - It says no clusters found - When I goto share a file to vimeo now nothing happens ..
Any clues - I am going mad....

There is nothing to fix, it is not supposed to show up there. It will only show there as a 'camera' if there are photos taken with the iPad, copied onto it via the camera connection kit, or saved from emails/websites etc which you might want to then copy to your comptuer.
What do you want to do with the iPad via My Computer ?

:: NWA does not show table view for monitoring reports ::

Hi,
We are facing an issue in one of our portal system.
I click on Portal index page, then I go to Net weaver Administrator --> Monitoring --> Java system reports.
Here I get the resource utilization graphs.
The graphs show proper values however when I click on table view it does not show any value or table at all.
Then I click on Settings button, and click on Persistent radio button.
It asks to enter the number of days for which the the data should be stored.
I gave it as 2 days and click on Apply button.
It shows a message saying "changes would be effective after restarting monitoring service".
However when I go there i.e. NWA --> Administration --> Applications
I get below services
cafruntimemonitoring~ear
com.sap.ip.bi.sdk.monitoring
tclmwebadminmonitoravail~wd
tclmwebadminmonitorcomplib~wd
tclmwebadminmonitorprovider_ear
tclmwebadminmonitorstate~wd
tclmwebadminoverviewmonitoring~wd
tcmonitoringsysteminfo
Would you kindly suggest which service from above list should be restarted ?
Thank you, Regards,
Girish Garje.

I think what is being asked is "How do I expose a database view as a schema table in Configuration Manager?"
This is accomplished by creating a database view within the WCC database schema (and with the WCC schema user as the view owner). The view then will appear as a table in the "table" tab in Configuration Manager.
One caveat in 11g is that the user created by RCU does not have any privileges to read/create views in its own schema. You may need to grant privileges to views for the WCC schema user before this will work.

Not all iTunes Files not showing up on External HDD

My old TC (the flat model from back to 2008 I think it was) broke down the other night so I removed the WD 2.0TB HDD (containing over 30'000 music files) to run this as an external HDD. I had swapped the original 500Gb with a 2TB drive which worked super for a couple of years.
Anyway, before all of this happened all songs showed up on iTunes and each single one could be played correctly from iTunes (without the ! should the file not be found) so all files were located through iTunes to the correct directory. Only one directory for my Music files...
Now, when I connect the HDD through an USB cradle (nothing has been touched on the drive) only a fraction of the files actually show up in the directory which is very odd indeed? I believe it was the same when the thing was actually working but didn't give it a think as it was doing what it was expected to do.
Next step was that I copied the whole HDD over onto my MAC and sizewise all (?) the files came over but still not all are showing...
So, how can I make sure all the files are being included as I want to move them all over to my new 2TB TC?

Thanks Limnos for taking your time with this.
Here's what happened
1) All my Music was stored on a TC 2.0TB WD hard disk which I shared with my partner.
2) All music in iTunes were mapped to this specific location and only this location.
3) When opening the folder on the TC only a fraction of the actual music folders were available to see (i.e. Artist The Wonder Stuff folder was present and in this folder only 2 album folders were found when in fact there should have been 12)
4) All songs in iTunes did play correctly so if i wanted to listen to one of the The Wonder Stuff songs they would all play (even albums that did not show up in the artist folder from above).
5) When clicking show file in finder, the file would show up and then again when going back manually into the folder as above.
6) TC dies on me. No more power.
7) Took out the HDD and put it in a cradle to extract the songs.
8) Right click on the folder shows there are about 35'000 files which sounds right BUT only a fraction of these can be seen.
9) Now I cannot do the show in finder through iTunes as the directory no longer exists (the TC died and I threw it away, except for the HDD).
10) The files are on the HDD but I cannot see but a fraction of them when opening the folder...
I hope this makes it a little more clear.
I honesty do not know what to do as I know the files are there but cannot see them and thus map them in iTunes... :-(

Files not showing up on external Drive

I'm having this really strange and irritating issue with my external hard drive in 10.5.
I use a folder named "incoming" on an external usb HDD for all my miscellaneous downloaded files, but for some reason, when the transfer completes in the download application, the new files don't appear there. Similarly, when I unzip or create new files on this drive, they'll inevitably either disappear, or folders will appear empty.
Even stranger, I can actually see all these files and use them like normal if I open my external drive by typing "open /Volumes/Storage" in Terminal, but if I browse through Finder, half are missing.
I was using this drive in Tiger with no issues, it's HFS+ formatted and I've tried running Verify/Repair in Disk Utility to no avail.
UPDATE: Upon looking at the mount point of the drive in finder, it says it's mounted at "/Volumes/Storage 1". When I open that mount point in Terminal I can only see some of the files, but when I open "/Volumes/Storage" I can see all the files.

I have a customer also reporting this same issue with files copied to an external RAID not showing up in Finder, since the 10.5.2 update / Leopard Graphics 1.0 updates. Zapping PRAM fixed the problem temporarily but after a day it's come back. [This is only one of four identical iMacs updated in the same manner that is showing the problem].

Resolution 1920x1080 not available for an external monitor

Hi,
I've just bought a Tv Lcd + Monitor 24 Samsung P2470hn, I have a DisplayPort to DVI adapter and a DVI to HDMI cable to the monitor. But when a I go to System Preferences -> Displays, I only have resolutions up to 1600x900. The monitor supports 1920x1080 but it isn't available. What I'm doing wrong? Could it be the DVI to HDMI cable? The monitor has a DVI input.
One weird thing is that when I go to System Profiler -> Graphics/Displays I see that the external monitor has this
SyncMaster:
Resolution: 1600 x 900 @ 60 Hz
Pixel Depth: 32-Bit Color (ARGB8888)
Main Display: Yes
Mirror: Off
Online: Yes
Rotation: Supported
Television: Yes
Note the last item "Television: Yes" could be that the problem? if so how can I change it?
Thanks
Gabriel

I find it very annoying that I have to use MiniDisplay Port to VGA to get 1366x768 or 1920x1080 resolution options in the Display Control Pane. If I use MiniDisplay Port to HDMI, I get some old common resolutions, (some weird ones too like 1344x1024) as well as 720p, 1080i, and 1080p. 1080p would be great, except this is more of a "TV" video input rather than a "PC" monitor input, I either get overscan or underscan (depending on the "Overscan" check box).
Why, especially since it's all digital with HDMI, doesn't Apple include nice 1:1 Pixel mapping using HDMI? It's very frustrating! I've noticed some, (generally more expensive HDTVs, like my 63" Samsung Plasma), HDTVs will do "Just Scan" (as opposed to "OverScan" or "UnderScan") then the 1080p with HDMI works beautifully.
All of my VIZIO TVs, I have to use the VGA to get 1:1 Pixel mapping. At least, with a high quality VGA cable (even my 25 foot one from MonoPrice.com that would cost 10 times more at a local store) does convert back to digital (for LCD panel) without noticeable noise and pixel shifting (or ghosting, which I've seen with cheap VGA cables, weird, seeing analog distortions on a digital LCD display, but hey, bad analog in -bad analog looking image out). Plus, unless you have the newest Macs with audio supported through the MiniDisplay Port, you can only get the TV speakers to work with the "PC" VGA input and the "PC" audio input (3.5mm stereo phono jack) next to it. With an HDMI input, the TV will look for audio in the HDMI source and not from the "PC" audio input.

Video not in sync on external monitor

Hi-
I have Final Cut Pro 4, with the computer hooked to a DVCAM deck via firewire. The deck is hooked up to an external Sony NTSC monitor via BNC cables. When logging and capturing, I can see the video on the external monitor and it looks fine. However, when I playback video from the timeline, the video on the external monitor is out of sync- it looks like there are rainbow colored bars moving across the screen from left to right, and the picture is all swirly (not a great technical description I know). I checked the suggested settings in FCP and they seem ok, except that I could not find the option to View- Refresh A/V Devices in the menu list. If anyone has any ideas on what I should be looking for, don't know if it's the deck or the monotor or FCP, I'd appreciate any input. Thanks!!

Well... your sync issue is likely that you do not have powered external speakers and some sort of mixer attached to the dvcam deck.
The other stuff? Dunno.

Red Arrows not showing in debug mode

Hi Experts,
I have a few processes running in my scenario dropping messages on a queue.
For some reason only the main trigger shows red arrows and the rest does not ?
Does someone have an idea how I can solve this because I need to debug those parts but I can't see that red arrows.
Kind Regards,
Brenden Draper

Hi All,
To explain the complete process...
The file comes in and is put to the ASN queue.
1. The ASN scenario is fired putting the same result to a ProcessASNMod1.1 and ProcessASNMod1.2 queue.
2. ProcessASNMod1.1 scenario is fired putting a result message to a ProcessASNMod2 queue.
3. ProcessASNMod2 scenario is fired.
4. ProcessASNMod1.2 is fired.
And I am only able to see the debug arrows in the ASN and the ProcessASNMod2 scenarios.
ProcessASNMod1.1 and ProcessASNMod1.2 arrows does not show.
Can any one tell me why this would happen ?
Kind Regards,
Brenden Draper

Droplet jobs submitted not showing up in Batch Monitor

I am compressing MP4 files in large batches of 100-150 files at a time by dragging them over a droplet. I can submit about 4-6 batches in a row, but after that Batch Monitor does not appear to accept anymore batches.
I can continue dragging files over my droplet and submit the batch. The process completes as if the batch was submitted successfully, but it never shows up in batch monitor and the output files are never created. Any ideas?
I have three, dual-quad Intel machines with 8 GB of RAM in their own private cluster processing my jobs.

Setting found to increase number of jobs.

T400 Images Not Displaying Correctly On External Monitor

One of our users has a T400 laptop (6475-FM4) with Windows XP Professional installed on it. He has an external monitor that he has plugged in to his laptop which he is using to extend his desktop.
If you open up a document (say Word or Excel) that contains images and view it on the laptops screen you can scroll up and down the document and the images are displayed OK.
If you open the document on the external screen then the images are displayed when you first open it, but as soon as you scroll up or down all you can see are the place holders for the images. If you move the document back to the built-in screen they display correctly.
What have I done so far?
I have updated the Chipset drivers and the actual Graphics/Video drivers and the issue is still the same.
I have tried turning down the Hardware Acceleration but that did not resolve the problem.
I've made sure that the Field codes option in Word is not ticked (suggestion found via Google)
I've made sure that the Picture placeholders option is not ticked in Word (again found on Google)
I've searched the internet for other possible solutions and can not find any.
HELP!

one more point to add...i installed windows using bootcamp, and through windows the 2560X1440 resolution works. so its not a hardware problem either

MiniDisplayPort to VGA not working to the external monitor. macnook 2014 13' yosemite

MiniDisplayPort to VGA not working to the external LCD monitor.please help!

Howdy aimilios__,
If you are having an issue with not getting video on your external display from your MacBook Pro, I would suggest that you troubleshoot using the steps in this article -
Apple computers: Troubleshooting issues with video on internal or external displays - Apple Support
Thanks for using Apple Support Communities.
Best,
Brett L

Display not working after using external monitor

I was using my Macbook Air last night to watch via my external monitor displayed to a tv. After I was done, I put my macbook Air in "Sleep" mode via the external display. This morning when I startup my Macbook, I have a blank screen. My suspicians are it's still in the "External display" mode. Anyone experienced this before and found a way to switch back to normal display via key sequence or something?

Reset the NVRAM:
Shut down your Mac.
Locate the following keys on the keyboard: Command (⌘), Option, P, and R. You will need to hold these keys down simultaneously in step 4.
Turn on the computer.
Press and hold the Command-Option-P-R keys before the gray screen appears.
Hold the keys down until the computer restarts and you hear the startup sound for the third time.
Release the keys.

RED footage not showing up on external monitor (CS6)

Similar Messages

Maybe you are looking for