Red hat 6.0 & ows 3.0x & wrb listener doesn't start

is there a patch for upgrading the oracle application 3.x to work
on red hat 6.0? I got the patchset for the 8.0.5 db and it
now works correctly but when I try to start the web server
i get:
OWS-08820: Unable to start WRB process
`/home/oracle/ows/3.0/bin/mnaddrsrv'.
I see there has been recent discussion about OAS 4.0.7 and a
patch but nothing about 3.x
null

bear (guest) wrote:
: oas3.0 can not run on rh6 ,owsctl can not start wrb and adm
Downgrade your procps rpm package to 1.2.9
Don't forget to create a sym link for /var/opt/oracle/oratab
to /etc/oratab
Even the PS/SQL cartridge works....
Greetings, Eric.
null

Similar Messages

Installation of Oracle AS 10g on Red Hat ES 3.0

Installation of Oracle AS 10g on RedHat ES 3.0 (All issues are cleared and u will b done with no error like Java Configuration Failed and make files errors)
Red Hat Enterprise Linux 3 Custom Installation
Copy from OTN Note
Start
Oracle 10g is certified to run the base release of Red Hat Enterprise Linux 3 (Advanced Server and Enterprise Server) without updates. If you have update CDs, you can use the boot CD from the update instead of the boot CD from the base release to automatically apply all updates during the installation. All updates from Red Hat are supported by Oracle.
1.     Boot the server using the first CD.
o     You may need to change your BIOS settings to allow booting from the CD.
2.     The boot screen appears with the boot: prompt at the bottom of the screen.
o     Select Enter to continue with a graphical install on the console. (For other installation methods and options, refer to the Red Hat Installation Guide.)
o     The installer scans your hardware, briefly displays the Red Hat splash screen, and then begins a series of screen prompts.
3.     Language Selection
o     Accept the default.
4.     Keyboard Configuration
o     Accept the default.
5.     Welcome Screen
o     Click on Next.
6.     Mouse Configuration
o     Accept the default.
7.     Installation Type
o     Select Custom.
8.     Disk Partitioning Setup
o     A thorough treatment of disk partitioning is beyond the scope of this article, which assumes that you are familiar with disk partitioning methods.
(WARNING: Improperly partitioning a disk is one of the surest and fastest ways to wipe out everything on your hard disk. If you are unsure how to proceed, stop and get help, or you will risk losing data!)
This article uses the following partitioning scheme, with ext3 for each filesystem:
The 9GB disk on the first controller (/dev/sda) will hold all Linux and Oracle software and contains the following partitions:
- 100MB /boot partition
-1,500MB swap partitionâSet this to at least twice the amount of RAM in the system but to no more than 2GB (32-bit systems do not support swap files larger than 2GB). If you need more than 2GB of swap space, create multiple swap partitions.
-7,150MB root partitionâ This partition will be used for everything, including /usr, /tmp, /var, /opt, /home, and more. This was done purely to simplify installation for the purposes of this guide. A more robust partitioning scheme would separate these directories onto separate filesystems.
9.     Boot Loader Configuration
o     Accept the default.
10.     Network Configuration
o     It is usually best to configure database servers with a static IP address. To do so, click on Edit.
o     A pop-up window appears. Uncheck the Configure using DHCP box, and enter the IP Address and Netmask for the server. Be sure that Activate on boot is checked, and click on OK.
o     In the Hostname box, select manually and enter the hostname.
o     In the Miscellaneous Settings box, enter the remaining network settings.
11.     Firewall Configuration
o     For the purposes of this walk-through, no firewall is configured. Select No firewall.
12.     Additional Language Support
o     Accept the default.
13.     Time Zone Selection
o     Choose the time settings that are appropriate for your area. Setting the system clock to UTC is usually a good practice for servers. To do so, click on System clock uses UTC.
14.     Set Root Password
o     Enter a password for root, and enter it again to confirm.
15.     Package Group Selection
o     Select only the package sets shown here. Leave all others unselected.
o     Desktop
- X Window System
- Gnome
- KDE
- See my comments in the RHES 2.1 section regarding choice of GUI.
o     Applications
- Editors
- Graphical Internet
o     Servers
- Do not select anything in this group.
o     Development
- Development Tools
o     System
- Administration Tools
o     Red Hat Enterprise Linux
- Do not select anything in this group.
o     Miscellaneous
- Legacy Software Development
o     Click on Next to proceed.
16.     About to Install
o     Click on Next.
17.     Installing Packages
o     Software will be copied to the hard disk and installed. Change disks as prompted, and click on Next when the installation is complete.
18.     Graphical Interface (X) Configuration
o     Accept the defaults unless the installer does not recognize your video card. If your video card is not recognized, you will not be able to continue.
19.     Monitor Configuration
o     Accept the default if the installer correctly identifies your monitor. Otherwise, select a compatible monitor from the list.
20.     Customize Graphical Configuration
o     Accept the defaults.
21.     Congratulations
o     Remove the installation media from the system, and click on Next.
22.     The system automatically reboots and presents a new welcome screen.
o     Click on Next.
23.     License Agreement
o     Read the license agreement. If you agree to the terms, select Yes, I agree to the License Agreement and click on Next.
24.     Date and Time
o     Set the Date and Time.
o     If you want to use an NTP server (recommended), select Enable Network Time Protocol and enter the name of the NTP server.
25.     User Account
o     Create an account for yourself.
o     Do not create an account for oracle at this time. Creating the oracle account is covered later in this section.
26.     Red Hat Network
o     If you want to use or activate your Red Hat Network account now, accept the default, click on Next, and follow the product activation instructions that accompanied your Red Hat product.
27.     Additional CDs
o     Click on Next.
28.     Finish Setup
o     Click on Next.
29.     A graphical login screen appears.
30.     Congratulations! Your Linux software is now installed.
End of OTN Note
Now just install compat-db-4.0.14-5.i386.rpm
Gnome-libs-1.4.1.2.90-34.1.i386.rpm
Libpng10-1.0.13-8.i386.rpm
ORBit-0.5.17-10.4.i386.rpm
Install patch 3006854
Copy libcwait.so file from /etc to /lib
And make links
mv /usr/bin/gcc     /usr/bin/gcc323
mv /usr/bin/g++     /usr/bin/g++323
ln âsf /usr/bin/gcc296     /usr/bin/gcc
ln âsf /usr/bin/g++296     /usr/bin/g++
Kernel Settings as per requirement of ORACLE AS 10g in /etc/sysctl.conf
kernel.shmall = 2097152
kernel.shmmax = 2147483648
kernel.shmmni = 4096
kernel.sem = 256 65000 200 256
fs.file-max = 131072
net.ipv4.ip_local_port_range = 1024 65000
kernel.msgmnb=65556
kernel.msgmni=4096
Then restart the computer
Login with Oracle user
now path setting as
I have done this by make two environment files
Infra.env
TMP=/tmp
Export TMP
TMPDIR=$TMP
Export TMPDIR
ORACLE_BASE=/oracle
Export ORACLE_BASE
ORACLE_HOME=$ORACLE_BASE/appsrv/infra
Export ORACLE_HOME
ORACLE_SID=asdb     (if u will not define SID here then while starting database u will face an error ORA-07217:sltn:environment variable cannot be evaluated)
Export ORACLE_SID
PATH=/usr/bin:/usr/sbin
Export PATH
PATH=$PATH:$ORACLE_HOME/bin     (u can include command paths like dcm as u needed)
Export PATH
LD_ASSUME_KERNEL=2.4.19
Export LD_ASSUME_KERNEL
Copy this file with name as.env and change ORACLE_HOME from infra to as.
. ./infra.env
DISPLAY=localhost:0.0; export DISPLAY
Xhost +
Now u can check that DISPLAY is ok by run the command xclock if clock appears then ok else set DISPLAY with root user ok
Start installation from CD 1 .
. ./runInstaller
Press Y               (There is no need to disturb, upgrade, degrade any package)
Press Y
Installation will start while installing and reaches at ~50% then go to /oracle/appsrv/infra/bin open relink file and change at line # 50 i.e. remove 2 brackets
] âo [ and at line # 102 make= /usr/ccs/bin/make to /usr/bin/make remove ccs and save the file
There will no error in installation in infrastructure
Same as done with relink file in Middle tier installation. I would like to turn ur attention for a serious problem no one asked about it. Here u have seen that a script make 3 file in /usr/local/bin for infrastructure and middle tier when u finished infrastructureâs installation plz rename that 3 files as
Mv coredb coredb-infra
Mv dbhome dbhome-infra
Mv ora     â¦     oraâ¦-infra
If u overwrite that files by creating same name of middle tier files no problem.
When problem comes?
AS will work fine but when u have to install patches on AS then problem comes if u have overwrite that files. So plz rename them before creation of same files of middle tier. Thanx
Zeeshan
@CES
[email protected]

Hi,
I tried uname -a and it returns the following:
Linux NLABLINUX 2.4.21-20.EL.c0 #1 Thu Sep 9 02:07:03 EDT 2004 i686 i686 i386 GNU/Linux
We have the following problems:
1. I am having a box running RHEL 3.0 (got from centos.org). I have Oracle 10g running ok. Now I tried to install ASMLIB downloaded from technet. The files are:
rpm -Uvh oracleasm-2.4.21-EL-1.0.3-1.i686.rpm \
     oracleasmlib-1.0.0-1.i386.rpm \
     oracleasm-support-1.0.3-1.i386.rpm \
When I tried to install these files, I got the following error:
Checking for Red Hat enterprise kernel: [FAILED]
Also when I try to run /etc/init.d/oracleasm , I get the same error
Checking for Red Hat enterprise kernel: [FAILED]
2. We created 4 raw partitions /dev/raw/raw1 - 4 using raw command.
[root@rcdell root]# ls -l /dev/raw/raw[1,2,3,4]
crw-rw---- 1 oracle dba 162, 1 Sep 9 11:05 /dev/raw/raw1
crw-rw---- 1 oracle dba 162, 2 Sep 9 11:05 /dev/raw/raw2
crw-rw---- 1 oracle dba 162, 3 Sep 9 11:05 /dev/raw/raw3
crw-rw---- 1 oracle dba 162, 4 Sep 9 11:05 /dev/raw/raw4
then tried this:
SYS at +ASM on 29-DEC-04 >create diskgroup dg1 normal redundancy
2 failgroup c1 disk '/dev/raw/raw1'
3 failgroup c2 disk '/dev/raw/raw2';
create diskgroup dg1 normal redundancy
ERROR at line 1:
ORA-00600: internal error code, arguments: [kfdsk::grpmatch], [1],
[3939617408], [], [], [], [], []
ORA-00600: internal error code, arguments: [kfgrpJoin2], [5], [], [], [], [],
ORA-15076: Emulating I/O errors on the OSM disk
ORA-15076: Emulating I/O errors on the OSM disk
ORA-15076: Emulating I/O errors on the OSM disk
ORA-15076: Emulating I/O errors on the OSM disk
Any help is appreciated.
Irshad A. Buchh
Senior Principal Consultant

Graphic manager Oracle 9i on linux Red Hat 8.0

I would like to know if someone can help me about the way that i can start the Graphic manager of Oracle 9i on Linux Red hat 8.0, because after i installed Oracle, the manager starts but when I shut down my computer it never appeared again. Can you help me please???

I would like to know if someone can help me about the way that i can start the Graphic manager of Oracle 9i on Linux Red hat 8.0, because after i installed Oracle, the manager starts but when I shut down my computer it never appeared again. Can you help me please???

Name Service Error in Red Hat 7.3

Hi, I developed a CORBA application and everything works fine while I use Windows NameService. When I try to use Red Hat 7.3 NameService I get this:
org.omg.CORBA.COMM_FAILURE: vmcid: SUN minor code: 201 completed: No
org.omg.CORBA.COMM_FAILURE: vmcid: SUN minor code: 201 completed: No
at com.sun.corba.se.internal.iiop.ConnectionTable.getConnection(Unknown Source)
at com.sun.corba.se.internal.iiop.ConnectionTable.getConnection(Unknown Source)
at com.sun.corba.se.internal.iiop.GIOPImpl.getConnection(Unknown Source)
at com.sun.corba.se.internal.corba.ClientDelegate.createRequest(Unknown Source)
at com.sun.corba.se.internal.corba.ClientDelegate.createRequest(Unknown Source)
at com.sun.corba.se.internal.corba.ClientDelegate.request(Unknown Source)
at org.omg.CORBA.portable.ObjectImpl._request(Unknown Source)
at org.omg.CosNaming._NamingContextExtStub.rebind(Unknown Source)
I'm using J2SDK 1.4.2 in both Win2000 and Red Hat 7.3. In linux tnameserv looks like it starts fine but when I want to use it from Windows I get the error.
Is there any problem with NameService included in J2SDK 1.4.2 or in Red Hat?
Thanks

The problem may have to do with setting up the /etc/hosts file in Linux.
You should not specify -ORBInitialHost for tnameserv,
it always uses the localhost for tnameserv.
Please include the following lines in the /etc/hosts file and see if it corrects the problem:"
127.0.0.1 localhost
<Static IP If Any> <HostName>
If this isn't the solution, the issue may have to do with setting the -ORBInitialPort property correctly for tnameserv (although we suggest that you use the naming service, orbd, which is new to J2SE 1.4.2 and includes an option for using a persistent naming service). If you do not specify otherwise, the Java IDL naming service listens on port 900 for the bootstrap protocol used to implement the ORB resolve_initial_references() and list_initial_references() methods, as follows:
tnameserv -ORBInitialPort nameserverport&
If you do not specify the name server port, port 900 is used by default. When running Solaris software (not sure about Linux), you must become root to start a process on a port under 1024. For this reason, we recommend that you use a port number greater than or equal to 1024. To specify a different port, for example, 1050, and to run the naming service in the background, from a UNIX command shell, enter:
tnameserv -ORBInitialPort 1050&
From an MS-DOS system prompt (Windows), enter:
start tnameserv -ORBInitialPort 1050
Clients of the name server must be made aware of the new port number. Do this by setting the org.omg.CORBA.ORBInitialPort property to the new port number when creating the ORB object. For more information on using tnameserv in J2SE 1.4.2, see the doc at http://java.sun.com/j2se/1.4.2/docs/guide/idl/tnameserv.html. If you'd like to consider using the newer version of the naming service, you can read about it at http://java.sun.com/j2se/1.4.2/docs/guide/idl/orbd.html.

Oracle 10g on Red Hat Fedora

I've downloaded Oracle 10g Express edition on to my computer running a Red Hat Fedora Linux OS. However having read the getting started page of the database setup and followed the instructions to open the Go To Database Home Page, on my applications menu section, I am greeted by a Unable to Connect to Server page. Followed by: Firefox can't establish a connection to the server at 127.0.0.1.
Has any one else had this problem? If so how can it be resolved?
I have already turned off the firewall on my OS and it has made no difference. Is it Oracles fault in that they have not maintained this page on their website? Or is it a problem with the way my computer is set?

If you were able to reach to the end of the installation, then make sure both your database and listener are up and running. OracleXE requires the database to be registered against the listener to have the http access enabled.
From an OS prompt, ensure your environment variables are properly set,
ORACLE_HOME=pathToYourOracleHome
ORACLE_SID=XE #verify the instance name, xe or XE, it is case sensitive
PATH=$ORACLE_HOME/bin:$PATH
Then issue this command to verify the listener is up and running:
lsnrctl status
There you should see the http port at 8080 and the XE instance registered against the listener.
And verify the database is working:
sqlplus / as sysdba
SQL> select status from v$instance
You should see OPEN as the status.
Please post the output of the above commands.
~ Madrid

Oracle 8.1.5 on red hat 6.1

hi,
i am trying to install oracle 8.1.5 on red hat 6.1, i entcountered the when i am trying to run runInstaller.
initializing java virtual machine from
/usr/local/jre/bin/jre please wait.....
error in createOUIProcess(): -1
:permission denied.
I have installed jre1.1.6 v5 downloaded from
blackdown.org as a root user.
I am unable to understand why this permission denied problem is coming.
please help out.
thanks
rajneesh
null

You need JDK. the same version of jre that u used.
then export CLASSPATH to point to classes.zip of the jdk.
Thanks

Failed Installation of Oracle8i on Red Hat Linux 7.0

Hi,
I have successfully installed Oracle8i(8.1.6) Enterprise edition on Red Hat Linux 7.0 but while running the Database Configuration Assistant, it stops at the database initialization portion. I suspect the initmig8i.ora file is causing the problem. I have followed the installation guide very closely and the SID is mig8i. What might be the problem causing it to stop? Now, I can't connect to database.
initmig8i.ora located at
/u01/app/oracle/admin/mig8i/pfile
# Copyright (c) 1991, 1998 by Oracle Corporation
# Example INIT.ORA file
# This file is provided by Oracle Corporation to help you customize
# your RDBMS installation for your site. Important system parameters
# are discussed, and example settings given.
# Some parameter settings are generic to any size installation.
# For parameters that require different values in different size
# installations, three scenarios have been provided: SMALL, MEDIUM
# and LARGE. Any parameter that needs to be tuned according to
# installation size will have three settings, each one commented
# according to installation size.
# Use the following table to approximate the SGA size needed for the
# three scenarious provided in this file:
# -------Installation/Database Size------
# SMALL MEDIUM LARGE
# Block 2K 4500K 6800K 17000K
# Size 4K 5500K 8800K 21000K
# To set up a database that multiple instances will be using, place
# all instance-specific parameters in one file, and then have all
# of these files point to a master file using the IFILE command.
# This way, when you change a public
# parameter, it will automatically change on all instances. This is
# necessary, since all instances must run with the same value for many
# parameters. For example, if you choose to use private rollback' segments,
# these must be specified in different files, but since all gc_*
# parameters must be the same on all instances, they should be in one file.
# INSTRUCTIONS: Edit this file and the other INIT files it calls for
# your site, either by using the values provided here or by providing
# your own. Then place an IFILE= line into each instance-specific
# INIT file that points at this file.
# NOTE: Parameter values suggested in this file are based on conservative
# estimates for computer memory availability. You should adjust values upward
# for modern machines.
db_name = "mig8i"
instance_name = mig8i
service_names = mig8i
control_files = ("/u01/app/oracle/oradata/mig8i/control01.ctl", "/u01/app/oracle/oradata/mig8i/control02.ctl", "/u01/app/oracle/oradata/mig8i/control03.ctl")
open_cursors = 100
max_enabled_roles = 30
db_block_buffers = 2048
shared_pool_size = 4194304
large_pool_size = 614400
java_pool_size = 0
log_checkpoint_interval = 10000
log_checkpoint_timeout = 1800
processes = 50
log_buffer = 163840
# audit_trail = false # if you want auditing
# timed_statistics = false # if you want timed statistics
# max_dump_file_size = 10000 # limit trace file size to 5M each
# Uncommenting the lines below will cause automatic archiving if archiving has
# been enabled using ALTER DATABASE ARCHIVELOG.
# log_archive_start = true
# log_archive_dest_1 = "location=/u01/app/oracle/admin/mig8i/arch"
# log_archive_format = arch_%t_%s.arc
# If using private rollback segments, place lines of the following
# form in each of your instance-specific init.ora files:
#rollback_segments = ( RBS0, RBS1, RBS2, RBS3, RBS4, RBS5, RBS6 )
# Global Naming -- enforce that a dblink has same name as the db it connects to
# global_names = false
# Uncomment the following line if you wish to enable the Oracle Trace product
# to trace server activity. This enables scheduling of server collections
# from the Oracle Enterprise Manager Console.
# Also, if the oracle_trace_collection_name parameter is non-null,
# every session will write to the named collection, as well as enabling you
# to schedule future collections from the console.
# oracle_trace_enable = true
# define directories to store trace and alert files
background_dump_dest = /u01/app/oracle/admin/mig8i/bdump
core_dump_dest = /u01/app/oracle/admin/mig8i/cdump
#Uncomment this parameter to enable resource management for your database.
#The SYSTEM_PLAN is provided by default with the database.
#Change the plan name if you have created your own resource plan.# resource_manager_plan = system_plan
user_dump_dest = /u01/app/oracle/admin/mig8i/udump
db_block_size = 8192
remote_login_passwordfile = exclusive
os_authent_prefix = ""
compatible = "8.0.5"
sort_area_size = 65536
sort_area_retained_size = 65536
Thank you.
null

Richard,
It's a glib problem. 8i uses the glib 2.1 libraries, while RH7 uses the 2.2. There is a patch available from oracle support, or you can find a solution that has worked for me twice on the otn discussion forum.
Cory Franzmeier
<BLOCKQUOTE><font size="1" face="Verdana, Arial">quote:</font><HR>Originally posted by Richard Yip ([email protected]):
Hi,
I have successfully installed Oracle8i(8.1.6) Enterprise edition on Red Hat Linux 7.0 but while running the Database Configuration Assistant, it stops at the database initialization portion. I suspect the initmig8i.ora file is causing the problem. I have followed the installation guide very closely and the SID is mig8i. What might be the problem causing it to stop? Now, I can't connect to database.
initmig8i.ora located at
/u01/app/oracle/admin/mig8i/pfile
# Copyright (c) 1991, 1998 by Oracle Corporation
# Example INIT.ORA file
# This file is provided by Oracle Corporation to help you customize
# your RDBMS installation for your site. Important system parameters
# are discussed, and example settings given.
# Some parameter settings are generic to any size installation.
# For parameters that require different values in different size
# installations, three scenarios have been provided: SMALL, MEDIUM
# and LARGE. Any parameter that needs to be tuned according to
# installation size will have three settings, each one commented
# according to installation size.
# Use the following table to approximate the SGA size needed for the
# three scenarious provided in this file:
# -------Installation/Database Size------
# SMALL MEDIUM LARGE
# Block 2K 4500K 6800K 17000K
# Size 4K 5500K 8800K 21000K
# To set up a database that multiple instances will be using, place
# all instance-specific parameters in one file, and then have all
# of these files point to a master file using the IFILE command.
# This way, when you change a public
# parameter, it will automatically change on all instances. This is
# necessary, since all instances must run with the same value for many
# parameters. For example, if you choose to use private rollback' segments,
# these must be specified in different files, but since all gc_*
# parameters must be the same on all instances, they should be in one file.
# INSTRUCTIONS: Edit this file and the other INIT files it calls for
# your site, either by using the values provided here or by providing
# your own. Then place an IFILE= line into each instance-specific
# INIT file that points at this file.
# NOTE: Parameter values suggested in this file are based on conservative
# estimates for computer memory availability. You should adjust values upward
# for modern machines.
db_name = "mig8i"
instance_name = mig8i
service_names = mig8i
control_files = ("/u01/app/oracle/oradata/mig8i/control01.ctl", "/u01/app/oracle/oradata/mig8i/control02.ctl", "/u01/app/oracle/oradata/mig8i/control03.ctl")
open_cursors = 100
max_enabled_roles = 30
db_block_buffers = 2048
shared_pool_size = 4194304
large_pool_size = 614400
java_pool_size = 0
log_checkpoint_interval = 10000
log_checkpoint_timeout = 1800
processes = 50
log_buffer = 163840
# audit_trail = false # if you want auditing
# timed_statistics = false # if you want timed statistics
# max_dump_file_size = 10000 # limit trace file size to 5M each
# Uncommenting the lines below will cause automatic archiving if archiving has
# been enabled using ALTER DATABASE ARCHIVELOG.
# log_archive_start = true
# log_archive_dest_1 = "location=/u01/app/oracle/admin/mig8i/arch"
# log_archive_format = arch_%t_%s.arc
# If using private rollback segments, place lines of the following
# form in each of your instance-specific init.ora files:
#rollback_segments = ( RBS0, RBS1, RBS2, RBS3, RBS4, RBS5, RBS6 )
# Global Naming -- enforce that a dblink has same name as the db it connects to
# global_names = false
# Uncomment the following line if you wish to enable the Oracle Trace product
# to trace server activity. This enables scheduling of server collections
# from the Oracle Enterprise Manager Console.
# Also, if the oracle_trace_collection_name parameter is non-null,
# every session will write to the named collection, as well as enabling you
# to schedule future collections from the console.
# oracle_trace_enable = true
# define directories to store trace and alert files
background_dump_dest = /u01/app/oracle/admin/mig8i/bdump
core_dump_dest = /u01/app/oracle/admin/mig8i/cdump
#Uncomment this parameter to enable resource management for your database.
#The SYSTEM_PLAN is provided by default with the database.
#Change the plan name if you have created your own resource plan.# resource_manager_plan = system_plan
user_dump_dest = /u01/app/oracle/admin/mig8i/udump
db_block_size = 8192
remote_login_passwordfile = exclusive
os_authent_prefix = ""
compatible = "8.0.5"
sort_area_size = 65536
sort_area_retained_size = 65536
Thank you.<HR></BLOCKQUOTE>
null

Classes not found when compiling for jdk1.3.1_01 on red hat 7.2

I have just installed jdk1.3.1_01 (rpm) on linux red hat 7.2
I have written a small program to test, however, the compiler isn't able to locate the classes.
import javax.swing.*;
public class JTest {
public static void main( String args[] )
JOptionPane.showMessageDialog( null, "Hello", "Test Dialog",
JOptionPane.INFORMATION_MESSAGE );
System.exit( 0 );
When compiled it generates the error:
JTest.java:10: error:Variable "JOptionPane" is not defined in current context
I have the path and classpath set to what I think are the correct directory paths.
Any advice would be much appreciated!
Thanks..

Sorry, typo in the classpath... but now when I compile
I get error: "segmentation fault" then nothing else.
This also happens when I execute a precompiled app (eg
"java OldApp").This is to do with GLIBC-2.2, I believe. :/ (Pointed out by Niteen. :)
"ulimit -s 2048" should fix this. Adding this line to /etc/profile or your ~/.profile shall automatically run this command every log in.
Bhav

Installation Problem Oracle 9.2.0.4 on Red Hat Linux 5

I have installed Red Hat Enterprise Linux 5. I want to install Oracle 9i (9.2.0.4) Server.
I have created oracle user and set oracle home directory in the .bash_profile.After that i run runinstaller file but the message comes as below..
'The user is root. Oracle Universal Installer cannot continue installation if the user is root. No such file or directory.
Please tell me the actual solution.
- Prasanta

First of all, as pointed out by Hans, make sure you perform the installation with the oracle user, not root.
Next, you should be aware that installing Ora9iR2 on RHEL5 is neither supported nor planned, so you must be aware you will be on your own. There is no official procedure to install 9i on RHEL5, however, considering you will use this for personal purposes, not production, you can attempt the procedure provided by Ivan Kartik --> Oracle 9i on RHEL 5.
~ Madrid
http://hrivera99.blogspot.com

Oracle 8.1.7 installation problem on ( linux) red hat 7.1

HI,
I AM TRYING TO INSTALL ORACLE 8.1.7 ON LINUX RED HAT(7.1).
AFTER DOING ALL THE STEPS WHEN I RUN(./runInstaller) I am getting message
"Initializing java virtual machine from ../stage/components/oracle.swd.jre/1.1.8/1/datafiles/Expanded/Linux/bin/jre. please wait" and the execution terminates.
PLEAE HELP ME please help me !!!!!!
Also let me know which file to untar in the CD (linux81701.tar & glibc-2.1.3-stubbs.tar) also installed JDK1.1.8.
Please help Me..

Hi,
My name is Fridirick REMBEAUX and I have the same problem. ;))
I did not understand the first point after :
1. /usr/i386-glibc21-linux/bin/i386-glibc21-linux-env.sh
At which url can I get this script ?
I think that maybe it's not the same problem because the installer and so the jre
still executed but nothing else appears.
And I'm also lost. When did the oracle products work well ??
I think I damned.
Hi
I get same Problem on Rh7.3 !But when i execute 2 Step will be OK!
1. /usr/i386-glibc21-linux/bin/i386-glibc21-linux-env.sh
2. export LD_ASSUME_KENERL=2.2.5
HI,
I AM TRYING TO INSTALL ORACLE 8.1.7 ON LINUX RED HAT(7.1).
AFTER DOING ALL THE STEPS WHEN I RUN(./runInstaller) I am getting message
"Initializing java virtual machine from ../stage/components/oracle.swd.jre/1.1.8/1/datafiles/Expanded/Linux/bin/jre. please wait" and the execution terminates.
PLEAE HELP ME please help me !!!!!!
Also let me know which file to untar in the CD (linux81701.tar & glibc-2.1.3-stubbs.tar) also installed JDK1.1.8.
Please help Me..

Do you have oracle9i relink problem on Red Hat 7.1? READ THIS!

Red Hat 7.1 ld program has problem.
because that is applied elf_i386_glibc21 emulation patch for oracle8i.
downgrade binutils package or rebuild excluding glibc21 emulation patch.
and relink all :)
ftp://ftp.redhat.com/pub/redhat/linux/7.0/en/os/i386/RedHat/RPMS/binutils-2.10.0.18-1.i386.rpm
ftp://ftp.redhat.com/pub/redhat/redhat-7.1-en/os/i386/SRPMS/binutils-2.10.91.0.2-3.src.rpm

What about instead the java tools like
netasst and dbca (or also srvconfig srvctl:
I used the oracm config without using those tools for configuring rac).
Anyone found how to have them running on rh 7.1? I tried some suggestions from the list
but none works.
Bye,
Gianluca

Install Problem on Red Hat 7.1

When I try to install Oracle 8.1.7 on Red Hat 7.1, and run the
runInstaller, but nothing happens. Even no Welcome Page is
displayed.
[oracle@localhost Disk1]$ ./runInstaller
Initializing Java Virtual Machine
from ../stage/Components/oracle.swd.jre/1.1.8/1/DataFiles/Expande
d/linux/bin/jre. Please wait..
[oracle@localhost Disk1]$
I have create the group and user for installation, install Java
SDK 1.3.1 and set the path. Can anyone show me some directions
about what is the problem and how to solve the problem?

Thanks Olaf Tiemann,
I have not installed those packages yet and try the installation
again.
Finally I install the Oracle successfully and get the DB
running, though there are still 2 minor errors.
1. Error in invoking target relink of
makefile /oracle/OraHome/ctx/lib/ins_ctx.mk, the patch glibc-
2.1.3-stubs.tar.gz seems does not relink/replace this .mk file
2. Error when running the Root.sh, there are 2 sytnax errors at
the beginning of the script
It will be perfect to get rid of these 2 errors.
Anyway, my DB gets running.

Oracle Forms (11.1.2.2.0) is supported on RED HAT 7

Hi, all...
I need know if Oracle Forms (11.1.2.2.0) is supported on RED HAT 7, in certmatrix, the RED HAT 6 is supported, if I install in RED HAT 7, Oracle supports the product?
Thank you.

This forum is dedicated to support the Oracle Maven Repository and related Maven functionality and therefore, are unlikely to find answers to your Oracle Forms-related questions here. However, if the certification matrix does not explicitly list RHEL 7, that means that it has not been certified to run on RHEL 7.

Memory Problem with Oracle10g R2 and red Hat linux 2.4.21-37.EL

Hi All.
i've a 64Bit red Hat Linux 2.4.21-37.EL , 5GB Ram , 3GB Swap Space.
Oracle10g R2. i've 2 prodection database each is having 1400MB of SGA.
when i check the free meory it shows only 12mb of ram is free..why..?
and in swap space it's only 200mb is used...why..?
when i check the dbwither is taking 1.2GB of RAM why..?
can anybody help me in this ...how to get free memory or configure os level to get more free memory.
Sarit
[email protected]

Linux uses Swap space to run applications. The RAM available may not be enough to run the applications so OS swaps the program between RAM and the swap space to run applications.
You can see your swap partition being used as the swap space with:
cat /proc/swaps
Regards,
Senthil Murugan

Problem with Javamail in Red Hat

Good afternoon.
I have a problem with javamail in Red Hat.
When i send a email in windows with my application, works well. But in Red Hat no works.
Gives the following error:
Java.lang.ClassCastException .... gnu.mail.handler.TextPlain
Does anyone know that happens?

You have much to learn. This is the wrong forum for most of it.
You should be able to use the package manager in Linux to
uninstall the Gnu version. Then read this:
[http://java.sun.com/products/javamail/FAQ.html#install|http://java.sun.com/products/javamail/FAQ.html#install]

Red hat 6.0 & ows 3.0x & wrb listener doesn't start

Similar Messages

Maybe you are looking for