Red Hat can't see my drives for the install

I will be installing Oracle on our new servers, except Red Hat Adv. Server 2.1 does not see the drives in my HP external drive enclosure. Red Hat does see the drive array that is in the local server. Does anyone know how to make Red Hat see this drive attached via SCSI cable (U320)? Best regards

Hi,
Is there any error message when you try to map network Drive manually? It would be better to provide more details about error message.
Generally speaking, this problem can be caused by Network Connection problem, please make sure your Client PC could access to Network Drive PC.
In addition, please check Network Drive PC security setting, if there is any firewall policy prevent this operation.
If still no use, please check Event Viewer if it identify this problem.
Roger Lu
TechNet Community Support
There is no error. There is no connectivity problem. THe drives map automatically and always have. I can open up File Explorer and browse these drives all I want. I can open up Word and browse to these drives just fine.
However, when I open certain programs, and click File | Open, the mapped network drives just simply aren't there. I only see C and D and that's it.

Similar Messages

Where can I find a driver for the SM bus? It is not available thru HP support.

I have a Compaq Presario V5120NR notebook. My operating system crashed and was not recoverable. I ourchased a copy of Windows XP Home Edition and installed it. This is the same operating system that came on the notebook. I downloaded all drivers available thru HP support and installed them. The Device Manager still shows that I have no driver installed for the SM bus. The notebook works, but has a few "quirks", such as the screen saver comes on, but then goes off for no apparent reason. No major problems, just little annoying things like that. Any idea where I can get the driver for the SM bus would be greatly appreciated, :-)
This question was solved.
View Solution.

You're very welcome.
Normally the SMBus controller with the chipset in your notebook is installed with the graphics driver.
I figured installing the generic AMD driver might contain the SMBus controller your notebook needs.
So, you can try that, or...
I have one other suggestion. Try this driver and see if it works. You have to manually install it.
http://h20000.www2.hp.com/bizsupport/TechSupport/SoftwareDescription.jsp?lang=en&cc=us&prodTypeId=12...
Download and run the file. It will extract to C:\SWSetup\sp33927.
Go to the device manager and click on the SMBus controller needing drivers.
Click on the driver tab. Click on Update Driver.
Select the manual search method and browse to the above folder.
Select the SMBUSati.inf file and see if it installs the smbus controller.
This driver is from a dc5750 desktop with an AMD chipset. Maybe that is a generic ATI controller used by a lot of PC's.

Can't see external drive for movie import

Hi gang,
I have all of my iMovie projects on an external hard drive plugged directly by Firewire 2 into my MacPro. When I run iMovie 9.09, I get a beautiful sorted list of all of my projects by year. When I run iMovie 10.0.5., I can't even see the external drive that contains my movies. On the left column of the new iMovie, I have the choices of iPhoto Library, All Events, All Projects, and an iMovie Library that is empty.
How can I see my external drive with all of my long years of iMovie work on it in the new version of iMovie?
Cheers!

Just to respond to the comment above.
Disk formatting and disk access security are two different thing.
An Airport disk can be formatted as HFS+ and both Macs and PCs will be able to access it.
Regarding "Security" which you setup on the Airport Extreme there are two option:
a) "Secure Disks: With accounts": Here each user on your network will only be able to see and access the folders and files they uploaded to the Airport disk themselves. The disk (as hardware) is shared but data is not shared.
b) "With a disk password": Here all users on your network will be able to see and access all folders and files on the Airport disk.
I hope this makes things a little more clear.
Karsten

Where can i find a driver for the mac?

Im looking for driver for this blue ray external harddrive for mac: MATSHITA BD-MLT UJ265

You'd need to check the mfr's website; I doubt there is one as Macs do not support Blu-Ray. However, what you do need is software to either play a movie or burn one.
Correction: are you talking about an external hard drive?
Or are you referring to a CD/DVD drive?
Addendum: googled the model number - it is a burner, so you'll need software. There is Roxio Toast for one thing.

Where can I download a Windows 7 64bit driver for the hp CDDVDW TS-L633N on my cpq60-615DX

EDIT --
I neglected to say that I tried updating the driver from the Device Manager device window and the result was a message saying it could not find a newer driver, that the one installed was correct.
Another EDIT
I also did not say that I have uninstalled the device, through Device Manager. Upon restarting the system, the drive was found and software installed but the problem remains.
Original message follows:
System: CPQ60-615DX
Windows 7 Home Premium 64bit
Drive: hp CDDVDW TS-L633N
In the process of installing some Roxio software, Creator 9, an unusable driver, are part of one, was installed. Now the device is not working.
When I didn't see on the list of devices on Windows Explorer, I went to Device Manager and found that it was flagged with the "problem" icon (exclamation point on a yellow background).
The General Tab Device Status box contains"
A driver (service) for this device has been disabled. An alternate driver may be providing this functionality. (Code 32)
The following information is shown for the device:
hp CDDVDW TS-L633N ATA Device Properties windo
Driver Tab:
hp CDDVDW TS-L633N ATA Device
Driver Provider: Microsoft
Driver Date:     6/21/2006
Driver Version: 6.1.7601.17514
Digtal Signer:   Microsoft Windows
Driver File Details:
hp CDDVDW TS-L633N ATA Device
Driver files: c:\Windows\system32\Drivers\cdrom.sys
Provider:         Microsoft Corporation
File Version:     6.1.7600.16385 (win7_rtm.090713-1255)
Copyright:        Microsoft Corporation. All rights reserved.
Digital Signer:   Microsoft Windows
c:\Windows\System32Drivers\PxHlpa64.sys
Provider:         Sonic Solutions
File version:     2.03.27a
Copyright:        Copyright 2003 Sonic Software
Digital Signer:   Not digitally signed
It appears that the Creator install installed part of the driver but not one that functions. It might be a problem with Windows 7 or the fact that this install is 64 bits.
I have searched the HP site and can't find a driver for the device. When I look at the list of drivers available for this system, the optical drive is not shown.
I downloaded and installed the HP driver search program - or whatever it is called - and ran it. There were no devices listed on "Optical Drive" tab when I looked at the results - it could not "see" the drive.
I realize that what I need is probably a generic driver from MS, that's why one is not shown on the HP site, but how do I go about finding the right one for this device?
Is there a generic "one size fits all" driver for Windows 7 which can drive this device?
Any assistance will be greatly appreciated.
Bob and Simon
This question was solved.
View Solution.

HI nhgfdstr:
Thank you for your inquiry. I am pleased to assist you!!
I am sending you a link to a "CD/DVD Drive Is Not Detected (Windows 7)" click here. For your convenience here is a document on "Downloading or Updating Software and Drivers for HP Computers"   click here.   I am also sending you a link, to third party site, with a driver for your hp CDDVDW TS-L633N , " Hp CDDVDW TS-L633N ATA Device Drivers Download" click here.
Happy Holidays!!!
Sparkles1
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the bottom right to say “Thanks” for helping!

Can't see hard drive on Reinstall

Was having some issues with my MBAir. Was all bogged down, taking 20 minutes to boot up and giving them the dreaded pinwheel. So I ran a reinstall of Snow Leopard opening that might clean it up. Took 5.5 hrs to do the initial writing and then when it rebooted and asked for me to select the disk location for the install there were none shown. Suggestions? I've tried restarting the OS Install disc and I still can't see my hard drive for the install. I opened Disk Utility and the only thing showing is my USB DVD drive with the install disk in it... kind of stuck.

If you want to try to replace it yourself, [iFixit has good repair guides|http://www.ifixit.com/Guide/Repair/MacBook-Air-Hard-Drive-Replacement/86 0/1].
As I take the parts out, I tape them to a piece of paper with clear packaging tape and write the step number (and screw color from guide) next to them. Making sure you've got the correct tiny screw in the right place is a bugger without doing that.

A driver for the PM 5191

Our lab would like to use the Labview 7.1 to control the Programmable synthesize / function generator (0.1 mHz-2 MHz, PHILIPS: PM 5191). Please tell me how can I find a driver for the PM 5191.
Thank you!

Ray.R wrote:
After a (quick) search of both Philips & Fluke websites, it's amazing how BAD their support is for that products. But it appears that the 5191, 5192 and 5193 are of the same family, so the link in my previous post should provide a driver that would be useful.
Probably the link will provide a good starting point but you should take some precautions. Despit being billed a a VISA Plug-n-Play Project style driver the drive is a llb that appears to have some very old roots. Font problems galore that I recall were common in 5.1 - 6.i(?) conversions and outdated VISA session handleing. A few Ctrl+A, Crtl+1 keystrokes will fix up the fonts with minimal pain. It does not appear to have full functionality either. The version conversion board could be useful to get it back to LabVIEW7.1. Then follow the manual to add functions you need that may not be supported.
Jeff

New MacBookPro. Where can I find a driver for my Microtek Scanmaker 3600

I recently bought a new MacBook Pro (10.6.8) but to date, haven't been able to find any software/driver to use for my scanner, including the Microtek site. I have a Microtek Scanmaker 3600 that still works perfectly. I have searched forums and online sites for software to use the scanner on the new laptop and hate to think I need to buy a new scanner when the 3600 works fine. I have an HP Deskjet 930C and was able to find the software/driver to use on the new laptop. Does anyone know where I can find the software/driver to get my scanner to work?
Where can I find a driver for my Microtek Scanmaker 3600. Tried VueScan and TwainSane without success. Do not want to buy a new scanner when old one runs great. Please Help?
Thanks!

Thank you for the response.
I downloaded it and it keeps telling me "No Scanner Detected." I looked on their website under supported scanners, found my Microtek ScanMaker 3600 and it says "NO" for Mac.
http://www.hamrick.com/vuescan/microtek_scanmaker_3600.html
I just sent an email to them asking if VueScan does support a my scanner. I hope it does. I have been searching but am not proficient or know enough of what to look for. I just don't want to have to buy another scanner.

If I use Quick Time 7.7.1 for Windows I have not problem, instead with Quick Tome 7.7.4 I can't see some plug-in the a web site

I use Windows XP SP 3 and when I open the web site www.volleybareggio.it, in the page La Società/La Storia there is a plug-in to reproduce and manage a sound that needs QuickTime but after the update to 7.7.4 I can't see it, while with the SW version 7.7.1 I hadn't non problem.
Thanks for your help.

Does the iPod work OK?
Does it charge when connect to the computer?
Does it appear in My Computer?
Look at the dock connector on the iPod. Compare with the iPod that does work/connect.
I suspect you have a 2G iPod. Those can only go to iOS 4.2.1
http://support.apple.com/kb/HT1353#iPod_touch_late2009
iPod touch (3rd generation)
iPod touch (3rd generation) features a 3.5-inch (diagonal) widescreen multi-touch display and 32 GB or 64 GB flash drive. You can browse the web with Safari and watch YouTube videos with Wi-Fi. You can also search, preview, and buy songs from the iTunes Wi-Fi Music Store on iPod touch.
The iPod touch (3rd generation) can be distinguished from iPod touch (2nd generation) by looking at the back of the device. In the text below the engraving, look for the model number. iPod touch (2nd generation) is model A1288, and iPod touch (3rd generation) is model A1318.

Adobe premiere Locate can't see google drive folders?

Hi,
For some reason Adobe premiere's new Locate feature can't see google drive folders. Does anyone know how to fix this?
Cheers,
Jayson

I found this workaround, adding the google drive folder as a new library (works in windows 7 too):
http://forums.adobe.com/message/5188767#5188767

Where can I find a Mac printer driver for the HP LaserJet 1536

Where can I find a Mac printer driver for the HP Laser Jet 1536dnf MFP

Hello, Mario here. All drivers available for this printer are located here: http://h10025.www1.hp.com/ewfrf/wc/softwareCategory?product=3974279&lc=en&cc=us& dlc=en&lang=en&cc=us
Select your operating system and you will be able to see what drivers are available. Let me know if you have any other questions.
I work on behalf of HP

Can't See NTFS drive no matter what i do / install / code

I've read and read and read and read and read. then installed, uninstalled, deleted, coded... no matter what i do i CAN"T get my mac to see my external NTFS drive for the life of me.
i'm about to distroy the stupid pc a friend gave me but fist i need to get the 1T of movies/music/tv shoes off the HD.
PLEASE HELP PLEASE PLEASE PLEASE!!!!!!
thanks
jIM
mountain lion (latest update)
mid 2010 MBP 8 gigs ram

Can anyone help me?? No matter what i do my MBP won't bring up the drives.. doesn't see them, no error messages nothing... they seem to work fine on the windows box but not matter what i install / uninstall the mac just won't see them.... anyone???

How can I download a driver for a Brother printer DCP-J411ODW for Mac OSX 10.9.1?

How can I download a driver for a Brother printer DCP-J411ODW for Mac OSX 10.9.1? I go to the right place on the Brother website and instead of downloading a driver it says there is a problem. Also something I did download and stuff on the CD provided with the printer is for a PC not a MAc. Help please.

OK, connecting a Wi-Fi printer is a 2 step process.
Connect printer to your network
Have computer to "see" printer on the network.
Follow Apple's steps for connecting a Wi-Fi printer in Printing in OS X. Read the article in it's entirety before installing.

How can I switch the region code on MBP w/ DVD drive for the 5th and final time?

How can I switch the region code on MBP w/ DVD drive for the 5th and final time? It brings up the window with that world map to do it, including the warning that "this is the 5th and final time I can do this", when inserting a DVD and opening "DVD Player", but it never executes my click on the "Change Drive Region" button prompt.
VLC or Quicktime Player won't play it either, but won't bring up that window to change Region Code anyway....
Otherwise, I'm not having any other issues with this MBP at all. Peak performance on all counts :-)
I tried resetting SMC after chatting w/ Apple Support, but it didn't help.
That was the link they provided. Resetting the System Management Controller (SMC) on your Mac
Tried zapping PRAM as well.
Thanks for any clues, Rene

Region encoding is the mechanism that enables motion picture studios to control the worldwide release of their movies. It is required by the DVD Forum (http://www.dvdforum.org/forum.shtml) in all commercial hardware DVD players. Every DVD-Video disc contains one byte of data representing a region code, which limits where the disc can be played.
http://support.apple.com/kb/HT2397
Once you have set the region in DVD Player five times it cannot be changed. However see this also:
http://support.apple.com/kb/TA25416?viewlocale=en_US&locale=en_US
Instead, use VLC to view videos from different regions:
http://www.videolan.org/vlc/download-macosx.html

I have multiple devices in my family. Each of us has an iPhone and an iPad. Is there a way for each of us to have our own Apple ID but one account so we can all get the same music, movies, books, etc. I can't see paying twice for something in the same fam

I have multiple devices in my family. Each of us has an iPhone and an iPad. Is there a way for each of us to have our own Apple ID but one account so we can all get the same music, movies, books, etc. I can't see paying twice for something in the same family.

Welcome to the world of digital media. Your can't really transfer it. I don't know what the rules are about transferring to your spouse but I do know that in some cases when you die, your heirs cannot inherit your digital media. This is why there is still an advantage to buying the CD since the usage rights belong to whomever holds the physical media.
A possible workaround is to burn the songs to a music CD with yout account (tracks only without song titles) and then having your wife upload it as a regular music CD onto her account. It's been a while since i've done this so I'm not sure if it would work now.
Please note that I'm not advocating copyright and/or TOS violations. I'm only suggesting ways to copy music for your own personal use which has traditonally been permitted. I only did this because I wanted to convert iTunes songs to mp3 files so I could burn them onto a data CD for use in my car. It would make sense that since married couples are a joint entity, this would be personal use.
Also, I'm not a lawyer so don't take this as legal advice.

Red Hat can't see my drives for the install

Similar Messages

Maybe you are looking for