Red Hat Linux Enterprise 5 64bit and Enterprise Manager 10.2.0.3 Install ?

Appreciate specific steps to ensure that Oracle Enterprise Manager 10.2.0.3 is installed as baseline for upgrade.
Red Hat Linux Enterprise 5.2 64bit.
The major problems are with the Configuration Assistant Web Cache during the Install. It fails with OUI-25031.
The configToolFailedCommands script contents is:
oracle.sysman.emcp.agent.AgentPlugIn

The root cause of Oracle Grid 10.2.0.3 did not install successfully was because of a Network Configuration Issue. i.e., some strange IP was being referenced over the internet and mapping it to my hostname of my server. I performed a "dig hostname" to see what ip was being associated with my so-called unique hostname. After fixing that problem and removing all of Oracle, I only had one warning with OPMN not starting. I discovered additional rpms that needed to be installed and all is good now until the next opportunity.
Learned Lesson: Pay Very Careful Attention to all configuration components and document as you go to ensure that you have your process documented.

Similar Messages

Install forms6i and report 6i on Red Hat Linux Enterprise edition 4.0.2

Dear All
we want to install forms 6i and reports 6i on Red Hat linux enterprise edition 4.0.2
if any person have step by step guide pl share with me
Thanks

such an old forms version on Red Hat 4 ? Please check first, if this is certified by Oracle
metalink.oracle.com - Region Certifications
can't you use the new Oracle Forms 10g ?

Jinitiator for Red Hat Linux Enterprise Edition 3

Hello Technocrats,
I need your reply for our very critical situation asap.
We have Red Hat Linux EE 3 hosted in all developers PC. Oracle Application 11.5.5 is hosted in a Sun Ultra1 server. Now we have licence for Oracle Developer Suite 10g for RH Linux 3.
My question is , will Oracle Jinitiator for the OS compatible be installed at time of iDS installation??
do we need to grab any specific Oracle Jinitiator for E-Business Suite in this regard??
Is Oracle Jinitiator avbl for Linux platforms. If not wat will be the solution for executing a E-Business module form in a Mozilla web browser in Linux Pc's
Kindly give all your valuable suggestions asap....... awaitng your reply

See http://www.oracle.com/technology/products/forms/htdocs/10g/clientsod_forms10g.html for information on officially supported configs.
The only certification I can see for Redhat is using Sun JPI 1.4.2. The Sun JPI certification was added with the latest patchset (9.0.4.2.0). I know Oracle was planning on certifying Forms 10.1.2 for Sun JPI 1.4.2 and 1.5, but I'm not sure if they managed in the end. Forms 10.1.2 is already available.
We decided to go for Sun JPI and not JInitiator because we have hundreds of external users. Their sysadmins are much more comfortable installing Sun JPI then they are installing the (unknown) Oracle JInitiator.
I've written a number of blog articles about our Sun JPI confguration at http://www.oratransplant.nl/category/oracle/forms/

Configure oracle rac10g on Red Hat Linux Enterprise 4 and vmware

Can anybody tell how can I configure Oracle 10g RAC using Vmware and Red Hat Enterprise Linux 4. I have two installations of Linux on vmware and I am able to ping inbetween two. A document will do the most.

http://www.scribd.com/doc/320791/Install-Oracle-RAC-10g-on-Oracle-Enterprise-Linux-Using-VMware

Oracle 10g on red hat linux enterprise 4

Please
Is REH enterprise 4 is perfect for installing oracle 10g or are there any installation issues. please guide me any one
Nasir

Hi everyone
Even though I'm an Oracle ACE I'm not an ACE in the Linux operating system.
I am getting a new laptop that has 4 GB RAM and a server that has a quad-core with 4 GB RAM and SCSI drives. Both of these are using the Windows operating system, the laptop using WIndows XP and the server using 2003 Server.
I have been advised to use VM Ware to install Linux and then install my Oracle database and / or application server.
Has anyone done this and would you be willing to give me some pointers?
I also noticed in this thread that someone is not recommending the use of Linux 5 from Oracle but rather use version 4, update 5. Would you be willing to let me have the low down on this?
If anyone has any white papers or word documents that show how to install Linux 4.5 on VM Ware I would be most grateful. My email address is: [email protected]
Best wishes
Michael
Best wishes
Michael

ORA-01017: OS Authentication on Red Hat Linux 6.2 and Oracle 11gR2

Hello
I am trying to eanble OS Authentication on Oracle 11.2.0.3 installed on a Red Hat Linux Server 6.2 and it just does not work. When I try to login I always get the error ORA-01017: invalid username/password; logon denied
I have set the following Oracle parameters:
remote_os_authent = TRUE
os_authent_prefix = OPS$
and i have created a linux user "oracle" and the Oracle user "OPS$oracle".
I know that the parameter remote_os_authent in 11g is depricated but i thought that it still should work, just an error messages occures then i start the database but it runs as usual, just the OS Authentication does not seem to work.
Does anyone knwo where the problem could be?
Oracle said that remote_os_authent is depricated because as it is risky, i know that, but my database is in a secure environment without any connection to the internet. What other way would there be without using remote_os_authent?
Thank you very much for your help.
Regards Bernhard

Thanks for the link, i found that i used a case sensitive user name as i created the user with "OPS$USERNAME" and this was why i cound not connect with that user.

FMS RED HAT LINUX PROBLEMS

Hi,
I hope that someone can help me. I am having so much trouble
getting FMS to work it is unbelievable.
We have installed FMS onto virtual server running Red Hat
Linux Enterprise 3. We have managed to get
FMS running but cannot get a connection to work. This is
using the sample application 'textchat'. here is a summary of what
we and a coleague have done.
1) I have linked the libraries to obtain the desired
libssl.so.4,
libssl.so.6, libcrypto.so.4 and libcrypto.so.6.
2) I have installed the lates mozilla firefox and the latest
flash
plugin (together with the update-flashplugin)
3) Then I have created the installation by adding the
following entry:
/etc/redhat-release together with it's content
4) Then I have performed a regular fms installation together
with adding
the licensing etc. I have also copied the textchat main.asc
file and the
textchat pages (swf and html)
So basically we have added all the missing libraries (that we
know of...cmon adobe get it together £3000
and you don't even include relavent libraries) .
If any body has any ideas please reply. we are almost a month
down the line struggling with this software.
Thanks for an help
Paul

Got Oracle Grid Infrastructure 11.2.0.3 to work on Red Hat Enterprise 6.3 Linux with out using asmlib and oracleasm.
SQL> alter system set asm_diskstring='/DATA/','/FRA/' scope=both;
SQL> show parameters asm_diskstring
NAME TYPE VALUE
asm_diskstring string /DATA/, /FRA/
SQL> create diskgroup FRA external redundancy disk '/FRA/';
Diskgroup created.
SQL> select name,state, total_mb, free_mb from v$asm_diskgroup;
NAME STATE TOTAL_MB FREE_MB
DATA MOUNTED 500,000 494,000
FRA MOUNTED 200,000 194,000
The issue I had encountered that was that I tried to install and configure Grid Infrastructure the way that I had previously using Red Hat Linux 5.5, 5.8 and then 6.0. I had decided to install Red Hat Linux 6.3 which does not support Oracle asmlib and oracleasm to keep up with the technology and to be innovative.
Oracle has added significant enhancements to Grid Infrastructure. The only way to become aware of these enhancements is to "Do It". I've documented this implementation and will now

Invoking oracle utilities in Oracle10g on Red Hat Linux

Hi,
I manage an oracle 10g database on Red Hat Linux Enterprise Server 3.
I have problems invoking oracle utilities like netca, dbca, dbua etc from the bin directory. Every time i type netca while in the bin directory, i get the following error:
bash: NETCA: command not found
however when i type ./netca while in the bin directory, this is what i get:
****ORACLE_HOME environment variable not set!
ORACLE_HOME should be set to the main
directory that contains Oracle products.
Set and export ORACLE_HOME, then re-run.
i then set the enviroment variable thus:
set ORACLE_HOME=/u01/app/oracle/product/10.1.0/db_1 export ORACLE_HOME
Further attempts to invoke netca still gives the same errors listed above.
please help if u can.
olumide

Hi,
check the installation guide how to set the environment. $ORACLE_HOME/bin is not included in the PATH variable (therefore bash: NETCA: command not found), ORACLE_HOME (and I assume other environment variables) are not set.
Don't read instructions word-to-word ,
set ORACLE_HOME=/u01/app/oracle/product/10.1.0/db_1 export ORACLE_HOME' is syntactically wrong, use
export ORACLE_HOME=/u01/app/oracle/product/10.1.0/db_1 .
Best regards
Werner

How to install ECC IDES in RED HAT linux version 5

Hai..
I would like to install ECC IDES in linux OS. I dont know Linux. So it is difficult for me to install.
I am having 500 gb HD.and in that 30 GB allocated as NTFS for WinXP.
Left space(470 GB Free) for linux and ECC IDES.
I want to know - how to partition this 470 GB in linux. I dont know which file system should be allocated and how it should be partitioned. I am using RED HAT LINUX Version 5.
i need a step by step process to install red hat linux with proper(file system) partition and
I need a step by step process to install IDES with Linux commands.
Thank You
Regards
R.Thillai Govindarajan

> i need a step by step process to install red hat linux with proper(file system) partition and
> I need a step by step process to install IDES with Linux commands.
Get the official installation guides at
http://service.sap.com/instguides
However, they won't contain "now enter command X and now enter command Y". You will need to have a basic understanding what you are doing before you can install a SAP system (and the database).
Markus

How to install and configure ASM on Red Hat Linux 6.4

Hi Team,
How do you install and configure ASM on Red Hat Linux 6.4?
Thank you in advance.
Bee

Here is an article that you may find useful http://eriglen.blogspot.com/2013/01/step-by-step-configuring-automatic-storage-management-on-standalone-server-with-oracle-enterprise-linux-and-oracle-11g-R2-using-external-storage-managed-by-openfiler.html

Memory Problem with Oracle10g R2 and red Hat linux 2.4.21-37.EL

Hi All.
i've a 64Bit red Hat Linux 2.4.21-37.EL , 5GB Ram , 3GB Swap Space.
Oracle10g R2. i've 2 prodection database each is having 1400MB of SGA.
when i check the free meory it shows only 12mb of ram is free..why..?
and in swap space it's only 200mb is used...why..?
when i check the dbwither is taking 1.2GB of RAM why..?
can anybody help me in this ...how to get free memory or configure os level to get more free memory.
Sarit
[email protected]

Linux uses Swap space to run applications. The RAM available may not be enough to run the applications so OS swaps the program between RAM and the swap space to run applications.
You can see your swap partition being used as the swap space with:
cat /proc/swaps
Regards,
Senthil Murugan

Installing 11i apps on windows xp and Red Hat linux AS 3.0

Hi,
I am a newbie to Oracle E-business suite............i will be very helpful if anybody could help me with the full procedure on how to install Oracle apps on windows on Windows XP and Red Hat linux AS 3.0.........starting with configuring ip.....i would really appreciate if somebody helps me out...........well thanks in advance..waiting for a optmistic reply...
Thanks again,
Virendra

I have done installation on XP and 2000 servers are heres the steps... detailed ones. I also request those who install Oracle Apps 11i to first read the installtion pdf's which helps you understand clearly the prerequisites overall.
You cannot find the Pre installtion steps(such as Mks Toolkit and GNUMake config) in more clear terms from those documents.Which are explained here.
The Must PDF's to refer before installation
1)r1152ins.pdf
2)11iconcepts.pdf
According to the 11iconcepts PDF you can decide your business needs the N-Tier Architecture and Database Server and Application Tier Server File System in a very clear terms.
The installation process can be divided into
Pre Installtion,Installation and Post-Installation stages.
I would caution everyone to concentrate more on Pre Installation stage and which is more critical for a successfull installtion of Oracle Apps and to be free with later cropping up problems.
Further before moving into Installtion stages i have to Explain the Number of CD's and Installtion type's in Oracle App's.
In many places you may need to wait patiently even more than 10 minutes for screens(Dialog Boxes) to appear dont conclude prematurely some problem on system.
In oracle Apps 11.5.1 it consist of 12 CD's.
1) Start Here CD(RAPID Installation Wizard)
2)1-11 CD's
1-3 Application Top information
4th Oracle DB
5-6 IAS and other tools
7-11 Oracle Apps DB.
You have to decide whether you are going to do a Single Node Installation(No Post-Installation Task) or Multi Node Installation. Refer(r1152ins.pdf)
While installing for Multi Node you can see the Installation locations to be mentioned as
Appl_Top,Common_Top,Data_Top etc.Try to install Appl_top and common_Top in one drive and Data_Top in another Drive(Single Node) and in different nodes in Multi Node installation.
Installation Types
Production ==>Real time Env implementation's
Test ==>For test Env Purposes
Vision Demo==>R&D or learning Purposes.
Pre-Installation steps
======================
Space Requirement for types of installtions
Install VC++
How to Download and install MKS tool Kit
How to Download and Configure GNUMAKE
Env path setting
Create Applmgr user in Win2000
Space Requirement for types installtion:
Memory Requirement
1 GB of RAM(512 Fine for initial Installtion)
but planned for more user connections another 1 GB of Ram and according to the number of user's and Application needs you have to Increase the Memory.
HDD capacity
APP_Top(A)
COMMON_TOP(C)
DATA_TOP(D)
Test DB : 22 + 20 GB (60 GB recommended)
Prod DB : 22 + 20 GB (60 GB recommended)
Vision Demo DB: 22 + 35 GB (80 GB recommended).
Plus space for ur staging area.
This are the actuall space required for the Oracle Apps Alone plan for more space for future needs etc.
Softwares on System
Win2000 server with Patch1,Winzip and Acrobat Reader Latest version etc.
Install VC++:
Install a clean installtion of VC++ of Visual Studio Family 6.0
It should be first installed before installing MKS or GNUMAKE
NOTE: When Visual C++ is installed, let the installer register all environment variables. This will allow executables to be linked from the command line.
How to Download and install MKS tool Kit:
Note:Try to purchase the MKS tool kit from the below site.
or try to download the trial version valid for a months time.
http://www.mkssoftware.com/products/tk/ds_tkio.asp
Evaluation copy from
http://www.mkssoftware.com/eval/
Choose "MKS Toolkit for Interoperability " Download it in C:\
Again you have to click the downloaded kit to start the actual download of 38 MB of MKS tollkit Evaluation version.
You will be sent a Demo serial number to your mail id==>copy the same to a Notepad on your desktop.
Now start the installtion of the MKSToolkit on your system by clicking on the MKStoolkit downloaded.
It will prompt you for the Demo serial number which has to be provided.
The MKStoolkit will be successfully installed.
How to Download and Configure GNUMAKE:
1) HOW TO GET AND INSTALL GNUMAKE ON WINDOWS2000
This can be done by performing the following steps:
NOTE: Please, be aware that you must install Visual C++ BEFORE installing GNUMAKE, because its installation process involves linking executables.
1) Before downloading GNUMAKE, you will need to acquire some utilities which will be used for unpacking files. You can obtain the required utilities at the following
URL: ftp://ftp.gnu.org/gnu/windows/emacs/utilities/i386/
The directory contains the following files:
README
djtarnt.exe
gunzip-1.2.4-i386.exe
gzip-1.2.4-i386.exe
tar-1.11.2-i386.exe
tar-1.11.2a.exe
Only two of the files are required:
gunzip-1.2.4-i386.exe and tar-1.11.2a.exe
2) After downloading the above files, rename them as follows:
gunzip-1.2.4-i386.exe => gunzip.exe
tar-1.11.2a.exe => tar.exe
Place them into a directory that you can set in you PATH environment variable.
3) Point your browser to the following
URL: ftp://ftp.gnu.org/gnu/make
The files needed from this directory are:
make-3.77.tar.gz
make-3.78.1.tar.gz
make-3.79.1.tar.gz
make-3.79.tar.gz
Development requires to install version 3.77 or above. Downloading the latest version is perhaps best decision, but there are advantages to downloading the version required by development (3.77). (This document assumes that version 3.77 has been downloaded) (NOTE: AVOID USING SPACES IN
DIRECTORY AND FILE NAMES. GNUMAKE,VISUAL C++, ETC. DO NOT ALWAYS DEAL WELL WITH SPACES)
4) For instance, suppose you have downloaded file make-3.77.tar.gz on a directory called C:\GNUMAKE, unpack this file using gunzip.exe from a Command Prompt Window
Example: C:\GNUMAKE>gunzip make-3.77.tar.gz This last action, will expand file make-3.77.tar.gz and the extension .gz will be removed.
5) On the same Command Prompt Window, you should UnTAR the file, with the following
command: C:\GNUMAKE>tar -xvf make-3.77.tar This will create a new subdirectory called MAKE-3.77 under C:\GNUMAKE, the original directory.
6) In the new subdirectory, there is a batch file
called build_w32.bat; run the batch file to generate GNUMAKE.EXE
Try this from Command Prompt more than once if succesfully not built message appers till you get Generated successfully.
Note:If Possible run all the bat files in the MAKE-3.77 and also config.bat in the sub directory by double clicking it.
WARNING: There is a known issue with this last step, "GNU make fails to build regardless of chosing build_w32 or nmake"
See [NOTE:115937.1]
for work around. RELATED DOCUMENTS ----------------- For Microsoft Visual C++, MKS Toolkit and
GNUMAKE support, you should contact their respective vendors Microsoft Visual C++, MKS Toolkit
and GNUMAKE are registered trademarks.
http://support.microsoft.com/ http://msdn.microsoft.com/ http://www.mks.com/
http://www.gnu.org/ Note:104010.1: Release 11i on NT: Software Requirements
Note:115937.1: GNU Make won't make on windows NT
Important:All the downloaded files from GNU makes web sites shall be put in a single folder called gnumake under c:\ .Try to search for config.bat file inside this folders just click and
run it.
Env path setting:
Try to search make.exe generated in c:\program files\mkstoolkit\mksnt and copy and paste it
c:\gnumake\MAKE-3.77\windebug and c:\gnumake\MAKE-3.77\winRel also paste both this paths in the
My Computers==>Properties==>Advanced==>Environment variables==>Path setting's
After all this check as follows from CMD mode.
1)execute make at c:\>
2)execute gnumake at c:\>
In win2000 it may return error messages or Target wrong ignore it.If it is on Win NT then it will return proper status.
Create Applmgr user in Win2000:
Create a Applmgr user account in win2000 .
Installation:
=============
What here you require is the Patience .
Load the START HERE CD and run the C:\> cd \cdrom\rapidwiz
For Test and Prod it will ask for the location of Appl_Top,Common_Top and Data_Top location. Mention there path and ensure if more than one installtion say eg.Vision and Test or Prod to check the Path in all the tab pages its corresponding values and path's.
In Vision Demo many of the Options are not propmted from the user.
It will then do the system checking for Host Name and other details.All the checking should have been passed or if failed it will mark it in RED cross mark.Rectify the mistake and then onceagain proceed or else you will have problem after installation.
The Installation time takes around 5 to 6 Hrs of time.
For info on Post installation or on Multi Node follow the pdf's i have mentioned above.
The most tedious of all is succesfully crossing the Apps system checking it does for all
installed products it requires without any failure.
The GNUMAKE configuration or steps were nowhere given and it was all our trail and error exp.
This is possibly the most elaborate steps to install Apps on Win. post for further help. email me at [email protected] or [email protected]
Rajeev.

Oracle 8i/9i and Red Hat Linux version

Hi,
Does anyone know, which is the earliest version of Red Hat Linux
supported by Oracle 8i or 9i?
Regards

Hi,
I downloaded the 9i, the installation started ok and I was
able to complete the install procedure, but a few things did not
go as I planned:
1.- The installation MUST be run on the console X, and cannot
be run from a remote terminal (odd!).
2.- On a 2-CPU machine the installation didn't install all the
files for the sistem to start.
3.- During a second attempt the installer issued an error
regarding a compilation problem.
Can anyone help me, I can't get the installer running without
problems.

Guide for Tuning and Optimizing Red Hat Linux AS for Oracle9i Database

I put together a step-by-step guide for tuning and optimizing Red Hat Linux Advanced Server for Oracle9i. It's my first draft version and I would appreciate any comments and feedback.
The article
"Tuning and Optimizing Red Hat Linux Advanced Server for Oracle9i Database"
can be found at:
http://www.puschitz.com/TuningLinuxForOracle.shtml
The article
"Oracle 9i Installation on Red Hat Linux 7.1, 7.2, 7.3, 8.0, and on Red Hat Advanced Server 2.1"
can now be found at http://www.puschitz.com/InstallingOracle9i.shtml
And both links for
"Oracle on Red Hat Linux"
can be found at
http://www.puschitz.com/OracleOnLinux.shtml
Werner

Is this good for Redhat Linux 9.0 and not just the advanced server.
If it is not could you please provide me the links to articles like,
"Guide for Tuning and Optimizing Red Hat Linux for Oracle9i Database"
"Guide for Tuning and Optimizing Red Hat Linux for Oracle9i App Server"
"Guide for Tuning and Optimizing Red Hat Linux for Oracle9i Infrastucture"
Thanks.

How can I build and run CDC in Red Hat Linux?

I downloaded the CDC and CVM(j2me_cdc_fp-1_0_2-src.zip), and wanted to build a VM in Red Hat Linux. But I can't find the Makefile in the "build" directory. How can I build it?

You should be able to run a J2SE VM with the CDC jar as the bootclasspath, I think.

Red Hat Linux Enterprise 5 64bit and Enterprise Manager 10.2.0.3 Install ?

Similar Messages

Maybe you are looking for