Red images in bridge and cs5?

In the last couple of months my images have become quite red in bridge and it switches back and forth from being too red on photoshop and then too red on bridge. I have no idea what the problem is and need help please.

also, do you have a wide gamut monitor, are you positive you are embedding profiles (and applying them in Ps)
can you post a low resolution copy of one of the problem images....

Similar Messages

New pc with windows 8.1, downloaded and installed cs5,no problem open bridge and cs5, but can't read raw file , try to update, can't complete or failed updating, please help

new pc with windows 8.1, downloaded and installed cs5,no problem open bridge and cs5, but can't read raw file , try to update, can't complete or failed updating, please help

Sounds like you somehow got the mac version.
Download the windows 6.7 camera raw update from this link:
Adobe - Photoshop : For Windows : Camera Raw 6.7 Update

Adobe Bridge and CS5 open when iPad connected

Why does Adobe Bridge and Downloader open when I connect my iPad? I cannot find in Preferences any way to toggle this off. HJZ
Message was edited by: Harry Zemel1

The same thing happens when you connect an iPod Touch.
Here's the solution:
1) Plug in your device; when Adobe Bridge pops up, just close them.
2) Open Image Capture app on your Mac (not sure about PCs), bottom left side says, "Connecting this (insert device name here ie. iPod or iPad) opens:"
3) select No application.
Done!

DNGs produced from Hasselblad .fff files display a different image in Bridge and Camera Raw

Lately, not sure when this started exactly, Bridge CC (and Camera RAW 8.7) are displaying incorrect DNG images! Instead of showing the image I expect to see, I'll see an old image from days ago. This seems to carry on from Bridge through to Camera RAW. But then if I continue on to Photoshop with the image, it'll finally show the correct image.
I'm assuming this has something to do with DNG, because if I load another raw file type (like .fff or .NEF), it seems ok. Also it seems to be ok with DNGs produced from other cameras like Nikon D90.
My set up:
- Mac OS X 10.9.5 (Mavericks)
- Bridge CC
- Camera Raw 8.7
- Photoshop CC 2014
- Hasselblad H4D-50

HI, I managed to fix the trouble by reinsatalling once again and running updates BEFORE opening bridge. It seemed that if I ran the update AFTER opening bridge I would get either an up to date status when checking for updates or I would get an install failure notice on all 4 updates that were trying to install. The updates were for camera raw, bridge and PS. I can't explain why but that helped a little. I also changed permissions on my whole user accnt to include read/write for all users. I can't say if this helped or not. I also had to go into my camera B/U files on a sepate HD and replace some of the CR folders I was using o nthe desktop. Still the CR files would not show a thumb nor a preview till I then went to each individual file inside that folder and purged the cashe for that file so it could repopulate the cashe yet again. This has been the strangest few days in PSCS6 history! Well my personal history. I will report back here if more quirks emerge. I would prefer quarks though....aloha, U

Image in Bridge won't open in Photoshop CS5

When I right click on an image in Bridge and select Open it won't open in Photoshop like it used to. Why? What can I do?

I was posting incorrectly. I have no further comments.

PS4 rendering very "hot" compared to Bridge and LR2- HELP I am stuck

Have done all kinds of tests and still get a difference nearly equal to setting the vibrance to +50 and the saturation to +6 in LR2 to somewhat equal the look of the imported image in PS2.
Here are the facts:
I have used Bridge to convert the NEFs into DNGs using Camera Standard for the D700 with no other changes;
Lightroom 2 and Bridge give the same rederings in terms of colors and relationships of color to each other. PS4 however, adds lots of yelow, brightens reds and blows highlights. I have opened the file three ways in PS4, three attempts through Bridge with Save and convert, another time with Save and option click, another time with Open. All three methods look equally bad. I have opened the file directly through PS4, not using Bridge. Just as bad.
Now here is the interesting part: when I take spot readings for the image in Bridge and the image in PS4, I get the same numbers.
For example: R,G,B for Bridge: 232,205,162 PS4: 232,205,163.
Should look the same, right?
PS4 Color Settings: Prophoto RGB, Gray gamma 2.2,Dot gain 10%,Convert to working profile, ask for mismatch, Engine: Adobe ACE, all other options not checked.
If I desturate monitor colors by about 15% the image looks closer to Bridge and LR2, but is still more yellow. This is not a good solution for printing reasons, however.
PS4 version 11.0.1 Mac OS/X version: 10.5.8 (not using the latest which is SnowLeopard.)
I have sent the query to Adobe Support, but suspect they'll tell me I don't have support and then there is a time lag, also.
Camera Raw: 5.5.097, PS4 11.01, LR2: 2.5 with Camera Raw 5.5 in the dialog box
WHAT VARIABLE HAS NOT BEEN CHANGED?

Yes, sorry, you did mention that the Zoom has replaced the Netgear. Regardless, if the Zoom is providing the NAT & DHCP services ... which I would assume that it is by default, the AEBSn should be reconfigured as a bridge.
With AEBSn still configured as a bridge, please try the following:
o Power-down the Zoom, AEBSn, and computer(s); wait at least 10-15 minutes.
o While the equipment is powered-down, connect one of your computers directly to any available LAN port on the AEBSn using an Ethernet cable.
o Power-up the Zoom; wait at least 10-15 minutes.
o Power-up (plug-into power) the AEBSn; wait at least 5-10 minutes.
o Power-up the computer connected by Ethernet.
The computer should now be able to gain Internet access. Please post back your results.

Using Bridge and LR with same folders/files

Having organized, edited and rated my photos using Bridge CS4 but recently started getting seriously into LR3 I still want to keep that file structure, either in a transitional period or indefinitely.
I normally use Bridge to import the photos, then spend some time creating sub-folders (one folder per event), organizing them. I'm hoping that I can add those (already organized) folders into LR, but can't figure out how. I see how I can import the photos, but I don't want that as I want to keep them all in the same location (they're all organized on the hard drive as I want them), just have LR "see" them so I can further edit and rate them. How do I do that?
I also want LR to understand and see the edits I've made to my RAW files as well as my ratings, keywords etc.
Are there other things I should keep in mind when having my photos work with both Bridge and LR?

It's possible to work the way you do, but with Lr it's a bit awkward, particularly if you start editing (developing) your images in Bridge.
You ask: " I'm hoping that I can add those (already organized) folders into Lr, but can't figure out how."
You have to import the images. Without importing nothing can happen in Lr.
So, open the Import Dialog. If it shows only the small window of the Import Dialog, click on the triangle in the bottom left corner, to expand the window.
On the left side you'll see the <Source> panel. navigate to the folder in question and click on it to select it. You will see all images in this folder in the main window of the Import Dialog.
Then in the top center of the Import Dialog select <Add>.
<Add> is for importing images that are already on the hard drive and you do not want to change their location.
<Move> is for importing images that are already on the hard drive and you do want to change their location.
<Copy> is for importing images from camera / memory card.
By selecting <Add> Lr will import the images in their present folder and will display the folder.
Your Bridge edits will also be imported because on import Lr reads the image file and the xmp-file where Bridge has stored the metadata of your edits.
But this is true only for import. Should you then decide for an image that has been imported in Lr to edit it in Bridge again, these edits would not automatically be visible in Lr. This is so because with imported images Lr stores all edits in its catalog, and does not display the metadata from the xmp-file where Bridge saves edits.
But you can make Lr read and display these additional Bridge-edits by doing a <read metadata from file>. But this is problematic because <reading metadata from file> will overwrite any Lr edits.
So you see that because of the fact that Lr works with its catalog while Bridge does not, editing images in Bridge and in Lr is a recipe for frustration. It can be done, but it's awkward and prone to mistakes.
Therefore I would suggest to bite the bullet and henceforth use Lr as your only editor. Import images from camera in Lr, do all your editing in Lr.
Since you are used to do edits in in Bridge Camera Raw, Lr will pose no big problems for you.
But if you don't want to let go of Bridge right away, I'd suggest you do at least one thing: After importing the images in Lr refrain from further editing these images in Bridge.

Can't open NEF in Bridge and Photoshop

Hi. I can't open my D800 Nikon NEF images in Bridge and Photoshop CS 6 of Creative Suite. However the jpgs from the D800 will open........ What to do. This is on an iMac that is 6 years old. What to do+
I have no problems opening the NEF on my newer laptop using the same software.

You'll need at least Camera Raw 7.1 to open D800 images. Go to your Help menu in Photoshop and choose Updates.
If that doesn't work, there's a way to download later Camera Raw updates manually, but Adobe has chosen to hide it for some unfathomable reason. I guess they're under the mistaken impression that the updater always works.
-Noel

How to add a jpg. watermark to images in bridge?

I'm trying to work out how to add a jpg. watermark to my images in bridge and also how to batch add the watermark.

add a jpg. watermark to my images in bridge and also how to batch add the watermark.
You can't do so in Bridge, only option for a watermark inhere is via the Output Module on a PDF contact sheet.
Best try this question in the Photoshop forum, they might have better answers because you need to create an action in PS to get what you want.

Frustrating: Bridge and PS5 desaturates my pictures.

Hi all,
I'm running Win7 with the Dell U2710 monitor. I've calibrated it, and for a while everything was pure joy, until suddenly Bridge and Photoshop choosed to desaturated all of my images!
All of my files are only appearing "native" or what to say in for instance Paint, or other non-color managed programs.
I don't know what is happening, but when I load up Bridge I can see it desaturates all of the tumbnails. Some weird stuff is going on though, because when I select an image, minimize bridge, and pop it up again, the image shows it's natural saturation.
It's really strange, and extremely frustrating!
One "fix" I've found for this, is to choose Proof Colors on, and Proof Setup to "Monitor RGB"
Here is how my color mangement settings are:
It's danish, I know, but I hope you understand the essens anyway :-)
I really hope someone has a solution for this!
I read another thread, about this issue but It seemed like she changed to mac - I hope i'm not forced into like that, since I'm happy with my Workhorse, AKA cheap hardware PC!

A little update:
This is what happens in PS:

Deleting images from bridge

I used to be able to right click on an image in bridge and delete it. That option seems to be gone. Has it moved? Am I missing it somehow?

In Mini Bridge, that option is not available, but in the full Bridge, it's still an option. Mini Bridge is mainly a tool to open/import your photos into Photoshop. Any file handling should be done in Bridge.

CS5 Bridge and Permission Problems

Hello there;
I just started experiencing a problem with Adobe Bridge. I am (and have been) using CS5 with no problems at all until just recently. Adobe Bridge does not seem to delete image files or rename image files for some strange reason. I get a message that says... "The file cannot be renamed because you do not have sufficient permissions or it is in use"!!! I have never experienced this since I installed CS5. I know the file(s) is (are) NOT in use. I am not able to delete or rename. Not sure if any other Bridge functions will suffer through the same problem as well.
Anyone experienced this issue before? Any suggestions to resolve it? Many thanks.

Hi Curt;
Many thanks for your response.
When I view the thumbnail images in Bridge, there is NO padlock symbol at all. Since I shoot everything in RAW, Explorer and Windows do not display the image itself, but an icon representing the .CR2 file (I shoot Canon). I have also tried the right-click to check the Properties of the files, and there is NO check mark for "read only". I am still at a loss. I sincerely appreciate your help if you can think of anything else.

I recently purchased a Canon 7D. I own Adobe Photoshop/Bridge CS5. I cannot open my raw images in Bridge. I have tried to download the plug in but does not seem to work. Please Help, I need to be able to open my raw images in Bridge ASAP. I do not want to

I recently purchased a Canon 7D. I own Adobe Photoshop/Bridge CS5. I cannot open my raw images in Bridge. I have tried to download the plug in but does not seem to work. Please Help, I need to be able to open my raw images in Bridge ASAP. I do not want to upgrade to CS6 at this time.

If you had given us sensible information, I could look it up for you if your efforts fail.
Right now, I don't even know if you are on a Mac or on a Windows box.
BOILERPLATE TEXT:
If you give complete and detailed information about your setup and the issue at hand, such as your platform (Mac or Win), exact versions of your OS, of Photoshop and of Bridge, machine specs, what troubleshooting steps you have taken so far, what error message(s) you receive, if having issues opening raw files also the exact camera make and model that generated them, etc., someone may be able to help you.
Please read this FAQ for advice on how to ask your questions correctly for quicker and better answers:
http://forums.adobe.com/thread/419981?tstart=0
Thanks!

Why are my images coming out of CS5 Photoshop granulated and pixelated after saving?

I am new to CS5 Design Premium. I use a Canon 50D and shoot in RAW format. I upload my pictures into Bridge and do most of my editing in Camera Raw, then I open the object into Photoshop where I save the image into a folder. I save each image as a .psd file AND a .jpg file. I save an extra as a .jpg so I can upload to my website and to order from the lab I use.
My question is: Why is it that my pictures are so granulated when I open them back up? They look completely fine on the screen but when I re-open them or upload them to my site, they look terrible. Have I messed up something with the formating/file size/ppi...? 8-bit, 16-bit? PPI...?
I am confused here and highly discouraged from using my new program....HELP PLEASE!!

Are you seeing this problem, when you Import those PSD's into a Premiere Pro Project, or in Photoshop?
If the former, have you done the Scaling to match the Frame Size of Sequence in PrPro? If not, this ARTICLE will be helpful. Note: in Video, DPI/PPI is meaningless, and only pixel x pixel dimensions matter.
If the latter, you will want to post to the Photoshop Forum.
Good luck,
Hunt

Images saved in PS CS5 show as red boxes

The folks in the Photoshop forum say that this is a RoboHelp 7 issue, so here I am.
My company recently upgraded me from Photoshop CS2 to CS5. Now, when I update an image in CS5, it shows up as a small red square in RoboHelp 7. If I re-open the image in CS2 and resave it, it loads correctly in RoboHelp. I've checked the save settings in CS2 and CS5 and they match and have not been able to find anything in RoboHelp that would change how it loads images saved in CS5.
So, is there a setting I'm missing in either CS5 or in RoboHelp that would get the images to show up correctly in RoboHelp?
Thanks in advance,
-darlisa

Hello again
I've been performing my own testing from this end. I just used an existing JPG image, then edited it in PS5 and saved back as JPG and am seeing what you are reporting. Definitely something is amiss here. CS5 HAS to be doing SOMETHING to the format because as you said, if the image isn't touched by CS5 it appears just dandy. But once you make any sort of a change to it in CS5, poof! (or is that a crash?)
I reached out to a Photoshop guru friend and she is stymied as well. Said it shouldn't be happening. As a workaround, you can save as PNG and that should work. I'll send a note to the RoboHelp developers and see if they have an answer. Maybe they can engage in a conversation at Adobe that will result in something.
In the mean time, you should consider filing a Bug Report on this to report it to Adobe. I'll also report from my end. (Link to the Bug Report form is in my sig)
Cheers... Rick
Helpful and Handy Links
RoboHelp Wish Form/Bug Reporting Form
Begin learning RoboHelp HTML 7 or 8 within the day - $24.95!
Adobe Certified RoboHelp HTML Training
SorcerStone Blog
RoboHelp eBooks

Red images in bridge and cs5?

Similar Messages

Maybe you are looking for