Red indicator in J1I5 updation for RG1

Hi,
While updating RG1 with Classification IWO, in stimulation I am getting RED indicators for a particular material document of Transfer posting.
Please advice me how to overcome this problem.
Thanx in advance.

Hi Rithvika,
Thanks for your inputs.
I have checked stock in register, there is enough stock of the material and all the receipts have been updated.
I ran same transaction in QAV and it is working. but in production for this particular material document I am getting red indicator.
The transfer posting is done from one material to another.
any other reason? Also please advice how this red indicator cna be changed to green so that it can be updated.
Thanx,
Anup

Similar Messages

In J1I5 Red indicator...

Hi All,
While updation In RG1 through J1I5, I am giving detial Excise Group E1, Plant HIP, Classification IDH for RG1. After Simulating It is giving RED Indicator for some of the material. What will be problem ?
Pl. give us solution.
Yusuf.

no answer

RG1 Updation for 102 mov type

Dear all,
RG1 relevance was set for movement type 101 gr against order.However 102 was not made relevant for Rg1 ,some documents were reversed using movement type 102 after that 102 was made relevant for RG1. Now when i am going to update RG1 for 102 material documents in J1I5 none of the material documents are getting selected ,Kindly suggest some way to update RG1.

hi,
Conceptually and as per rules u cannot reverse the entries of RG1.u can scrap but cannt reversed.
that is why 102 is not updating RG1.
in short it is better that u take goods to RG1 when u want to sell them.
regards,
sujit borse

How do I get rid of the red update number on app store? I have an update for an appmwhich requires ios6 which I cannot get on my iPad and there for cant do the update it is really annoying

I have an update for an app which I cannot update as it requires ios6 which I cannot get on my iPad - how do I get rid of the little red number? It is really annoying

Does this apply?
If you're asked for the password to your previous Apple ID when signing out of iCloud - Apple Support

Updation of RG1 register for make-to-stock material

Dear Experts,
Will you please guide me how to update the RG1 register in case of sales for make-to-stock materials?
With regards,
Jhelum Roy

Read SAP help documentation [Update of Registers RG 1 and RG 23 (Part I)|http://help.sap.com/saphelp_erp60_sp/helpdata/en/09/ebf138cdd78a4be10000000a114084/frameset.htm]

My MB Pro will not power up. when I look at the connector for the power supply, the green/red indicator on the connector is not lighting up

It appears to not be charged and when I go to plug in the charger the green/red indicator on the connector is not lighting up.

    Reset SMC.     http://support.apple.com/kb/HT3964
Choose the method for:
"Resetting SMC on portables with a battery you should not remove on your own".
     If this does not help, contact Apple.
   Genius Bar reservation:
   http://www.apple.com/retail/geniusbar/
Best.

Steps for Excise Opening Balance for RG1

Hi,
Can anybody tell me the steps involved in uploading the stock balance involved for RG1 updates.
Rgds,
Indrajit

Dear Indrajit
The following is the sequence for RG1 updation:
1. Set the Loose pack Indicator in SE16 Table J_1IRG1BAL to P. You also have to specify the Excise Group, material Number, User Id and Time of Updation. This entry is to be done only once, the very first time.
2. Update RG1 in J1I5. For the initial entry, specify the Posting Date and the Classification. You need to be extremely careful on the Classification type you use. If the material is coming from MB1C (Initial Stock Upload, possibly because you have uploaded the existing Stocks based on Cutover data), use ROP. If the updation is because of Production, you need to use Classification type: RMA - Receipt from manufacture". There is a rare possibility you may not see any entry for the manufactured quantity. More on this in Point No: 6
3. Also update the outward movements of finished goods ( IDH for Domestic Sales and IWE for Exports under Bond/ IDE for Exports against payment of Duty).
4. Extract the RG1 Register using T Code: J2I5. You must get a Green checkmark.
5.Print the RG1 Register using J2I6.
6. Sometimes you may not be able to view the manufactured material when you use RMA indicator in J1I5.(MIGO would have been used with movement type 101). Verify, if in Logistics-General --> Tax on Goods Movement --> India --> Business Transactions --> Incoming Excise Invoices --> Specify which movement types involve Excise Invoices, you have maintained 'RG1 Register' against Movement Types 131 and 132.
thanks
G. Lakshmipathi

Error in updation on rg1 register

Hi
I created a excise invoice for factory sale. While updating the register
J1I5 Update the RG 1 and Part I registers
it is not simulating. Why is there any customization setting i have to do or what?
kindly help in this matter
regards
chakri

In the case if updation is for first time:
RG1 Updation
The sequence is like this:
1. In SE16, enter Table name: J_2IRG1BAL, and click on Create. Enter the material Number and 'P' in Material form (Loose/Pack indicator) and click 'Save'. This step is to be done only for the first time.
2. Do your Initial Stock entry in MB1C, movement type 561
2. Go to J1I5, select Posting Date, Document Year and 'ROP in Classification (Receipt from outside under any other provision). Click on Create icon (Register entry)
4. Go to J2I5 and extract the RG1 Register. You must get a green checkmark.
5. After doing the PFI, go to J1I5, select Posting Date, Document Year and Classification 'IDH' (For domestic sales) or 'IDE' if the first removal is for Export Sale. Based on the accounting document generated during PGI (MB03) the RG1 Register gets updated with the removal for Outbound Delivery.
6. Reextract the RG1 register in J2I5. You must get a green checkmark.For the RG1 Register printout, go to J2I6, select the option, 'Script Form' and hit 'Execute.
All this was in OSS Note: 373001.
Regards,
Rajesh Banka

Updation of RG1

Hi Friends,
While updating RG1 in J1I5, once i enter all the inputs in the initial screen i am getting all the line items, once i select the line item & click on Simulate button that line item is turning into red actually it should turn into green right? i am not getting what exactly the error is?
Please guide.
Regards,
Vijay

Hi Vijay,
Kindly go thru the below threads,
RG1 updation
Not Enough Balance for utilisation
Re: real time scenario for pricing procedures
Else
Serarch forum with these key words,
1) RG1
2) Updation of RG1 register.....J1I5
3) rg1 difference
4) Issue In RG1 Register
5) issue In RG1 Register
Thanks,
Swamy H P

CIN: Items are not displayed while updating the RG1 Register using T Code:

Hi Experts,
Items are not displayed while updating the RG1 Register using T Code: J1I5.
System is not showing any error message.
Can any one explain to update the RG1 Register?
Thanks
Chandra

Hi,
dont go the table again and again . the table is updated at intial stage only for stock update but not when SAP is running.
In day to day bussiness the flow is as follows:
Production - MB31 - to Unres stock
Sales - VL02n - PGI - to customer - i.e out of unres stock
Every day u can run TC J1i5 once in a day as decided and update the register so all transactions which have happend in that day gets updated i.e both input and output.
and this will happen every day.
hence dont use table as it is only for intial data upload i.e just before golive.
Hope i am clear.
krishna

Updation of RG1 register

Hi,
Once again I am putting this question.
When I am trying to update the RG1 register with t.code J1I5,At the time of simulation,I am not able to simulate the some material document (getting the red tab against them).So that I am not able to update the RG1 register.
What can be the possible resons that some document not simulating.
I have maintained the J1iD after Creation of excise invoice.
Urgent

hi,
this is because there is not enuf bal against the material, try by posintg some inward goods movement thru a PO or a manual JV in j1ih. then ur issue will be resolved.
saurabh

Incorrect Opening stock & closing stock updation in RG1 Register

Hi ,
It's regarding Rg1 register update. As our cut-over date was 31.08.2010.
After extracting for the month of sept. , when no opening and closing stock
reflecting in it, than we realize it .Afterwards we maintain
the closing balance for 31.08.2010 in the table and try to
re-extract it,but there is no change in the sept.figure.After extracing for
October month,we get the values in the column ofopening stock and
closing stock in RG1 register. But for some material it is showing
negative stock and for some as Zero, though physically it is present.
What i found in Rgsum table that the stock quantity are not correct,
it seems that september stocks are not updated in the table also in
J_2irg1bal table ,only october stock are reflecting.
looking forward for your valuable inputs.

Hi,
All the Receipts And issues have been updated in J1I5 for september month.What i also found that in table for
RG23 summary of receipt and issue , the quantities has been updated for the particular month also in RG1
Excise details table all the entry are there for september month.The only problem is on Opening and Closing
balance table for Rg1. here in this , there is no entry for September month,but for october it is there.
How to correct this.
Regards
sujeet

Query for rg1 initial entry

hi gurus
i made initail entry for rg1 registers but now my query is wheather i have to update the RG23A-1 for value update or how it will be updated
in register for value
points will be rewarded for answer
regards
kunal

No need to update RG23A.
Just Update the RG1 Register in J1I5 and extract it using J2I5 if needed.
Points are useful.

Updating the RG1 register.

Hi..Gurus,
Iam updating the RG1 register like this. In my company we create sales order. After that the PP people do the Sales order to process order and put the stock into the unrestricted stock.
Then we do delivery and billing and excise invoice.
After creation of the excise invoice iam using the J1ID here in the Chapter Id and Material combination iam putting the material as RG1.after that iam using the T.code SE16 and in the table j_2irg1bal iam maintaing the some quantity in total receipts+issues field.
After that iam doing RG1 updation ,Extraction.
My question is is my process is correct or not? if we follow the process any problems come in the future.
Gurus please correct me.
regards,
jyothi.

Hi,
dont go the table again and again . the table is updated at intial stage only for stock update but not when SAP is running.
In day to day bussiness the flow is as follows:
Production - MB31 - to Unres stock
Sales - VL02n - PGI - to customer - i.e out of unres stock
Every day u can run TC J1i5 once in a day as decided and update the register so all transactions which have happend in that day gets updated i.e both input and output.
and this will happen every day.
hence dont use table as it is only for intial data upload i.e just before golive.
Hope i am clear.
krishna

Camera Raw 6.7 Update for Mac OS 10.10: Installation Failed error message.

Camera Raw 6.7 Update for Mac: Installation Failed error message. Update downloaded directly from Adobe website. Newly purchased Mac Workbook Pro, OS 10.10, using Photoshop CS5. Other updates successfully accomplished. Camera Raw 6.7 Update was downloaded multiple times with multiple installation attempts. Any recommendations?

thanks for the prompt response...i appreciate it. according to the link you listed, that's correct. the strange thing is that prior to the upgrad to mac os 10.8.4, photoshop CS5 was working just fine and i was able to open my canon raw files with my current camera raw plug-in version 6.7 which adobe has indicated is the last camera raw update they'll be offering for cs 5
so it's clearly an issue related to the "upgrade" of the os. seems like every solution creates 6 new problems...further evidence for the notion that if it ain't broke don't fix it! thanks again.

Red indicator in J1I5 updation for RG1

Similar Messages

Maybe you are looking for