Red Information in Netbeans 6
Hi,
receive flg. information if i run a project
Qoute...
Trying to override old definition of task nbjavafxconnect
Trying to override old definition of task nbjavafxstart
Trying to override old definition of task nbjavafxreload
Trying to override old definition of task nbjavafxappreloaded
unQoute
It is a known NetBeans issue [159657|http://www.netbeans.org/issues/show_bug.cgi?id=159657] Output message: Trying to override old definition of task nbjavafxconnect
Similar Messages
-
Photoshop CS5: Any color with zero red information will turn black
I've been having this problem ever since I installed Photoshop CS5 (12.0.4) on a Windows 7 64-bit machine. I've used the program on a Windows Vista 64-bit PC in the past with no problems.
Any color that has zero red information will turn black when in RGB mode and in either 8 or 16-bit mode. If I use the paintbrush, for example, a color with RGB 0/100/100 will be black. However, the color 1/100/100 will not. This problem also occurs with imported images. I've only tried JPEG and PNG so far. The problem does not save out though, as any image exported from Photoshop will appear fine. The issue seems to go away when in 32-bit mode, but it's a little RAM-intensive, and the file sizes are quite large.
I have reinstalled Photoshop, reset its preferences, and reinstalled my video card's drivers (I have a Radeon HD 7870). My PC has 8 GB of RAM and plenty of free hard drive space.
Below is a screencap of what's going on. I'm a bit lost here...any help would be greatly appreciated!It's a well-known issue with current ATI drivers and Photoshop's GPU-accelerated color-management logic.
You can work around it a couple of different ways:
1. You can install ATI's latest Catalyst 13.2 beta driver, which does solve the problem, or you can uninstall and drop back to Catalyst 12.8.
2. You can switch to Basic GPU mode (and restart Photoshop). Basic mode moves the color-management logic into the CPU. This might be a workaround you'd prefer to take until AMD releases their next non-beta driver where the problem is solved.
See also: http://forums.adobe.com/message/5004198#5004198
-Noel -
Olá amigos,
Deixei meu iPhone com meu amigo e ele acabou ferrando com meu celular, agora estou tentando restaura-lo a dois dias e não consigo. Preciso resolver isso urgente pois não posso ficar sem celular. Já tentei de tudo, alterar os arquivos de hosts, adcionar regras de entrada no firewall, desativar antivirus mais nada disso adiantou, não é possivel estabelecer conexão com o servidor de autenticação de firmware.
Fiz um debug e me retornou isso
Microsoft Windows 8 x64 Home Premium Edition (Build 9200)
Hewlett-Packard HP Pavilion Sleekbook 14 PC
iTunes 11.0.4.4
O QuickTime não está disponível
FairPlay 2.4.14
Suporte para Aplicativos Apple 2.3.4
Biblioteca do Atualizador do iPod 10.0d2
CD Driver 2.2.3.0
CD Driver DLL 2.1.3.1
Dispositivo Móvel Apple 6.1.0.13
Driver do Apple Mobile Device 1.64.0.0
Bonjour 3.0.0.10 (333.10)
Gracenote SDK 1.9.6.502
Gracenote MusicID 1.9.6.115
Envio para a Gracenote 1.9.6.143
Gracenote DSP 1.9.6.45
Número de Série do iTunes 0198B6D80A4F2E18
O usuário atual não é um administrador.
A data e a hora do local atual é 2013-09-30 09:17:26.
O iTunes não está sendo executado no modo de segurança.
A composição acelerada do WebKit está ativada.
HDCP é compatível.
Core Media é compatível.
**** Informações de Plug-ins Externos ****
Não há nenhum plug-in externo instalado.
iPodService 11.0.4.4 (x64) está atualmente sendo executado.
iTunesHelper 11.0.4.4 está atualmente sendo executado.
Apple Mobile Device service 3.3.0.0 está atualmente sendo executado.
**** Testes de Conectividade de Rede ****
Informações do Adaptador de Rede
Nome do Adaptador: {415C9B34-025A-4D5B-AAA3-84A8D6F77579}
Descrição: Adaptador Virtual Direto Wi-Fi da Microsoft
Endereço IP: 0.0.0.0
Máscara da Sub-rede: 0.0.0.0
Gateway Padrão: 0.0.0.0
DHCP Ativado: Sim
Servidor DHCP:
Cessão Obtida: Wed Dec 31 22:00:00 1969
A Cessão Expira: Wed Dec 31 22:00:00 1969
Servidores DNS:
Nome do Adaptador: {F4997EF9-AF49-40BC-A2C8-07D9F0C2F2EB}
Descrição: Ralink RT3290LE 802.11bgn Wi-Fi Adapter
Endereço IP: 192.168.0.101
Máscara da Sub-rede: 255.255.255.0
Gateway Padrão: 192.168.0.1
DHCP Ativado: Sim
Servidor DHCP: 192.168.0.1
Cessão Obtida: Mon Sep 30 08:55:47 2013
A Cessão Expira: Tue Oct 01 08:55:47 2013
Servidores DNS: 187.122.127.36
187.122.127.35
Nome do Adaptador: {94CB7669-3D2F-419B-9665-26F5C0FD9FC9}
Descrição: Realtek PCIe FE Family Controller
Endereço IP: 0.0.0.0
Máscara da Sub-rede: 0.0.0.0
Gateway Padrão: 0.0.0.0
DHCP Ativado: Sim
Servidor DHCP:
Cessão Obtida: Wed Dec 31 22:00:00 1969
A Cessão Expira: Wed Dec 31 22:00:00 1969
Servidores DNS:
Conexão Ativa: Conexão de rede local
Conectado: Sim
On-line: Sim
Usando Modem: Não
Usando LAN: Sim
Usando Proxy: Não
Informações do Firewall
O Firewall do Windows está ativo.
O iTunes NÃO está habilitado no Firewall do Windows.
A tentativa de conexão ao site da Apple foi bem-sucedida.
A tentativa de conexão para navegar pela iTunes Store foi bem-sucedida.
A tentativa de conexão para comprar na iTunes Store foi bem-sucedida.
A tentativa de conexão com o servidor de ativação do iPhone foi bem-sucedida.
A tentativa de conexão com o servidor de atualização de firmware foi mal-sucedida.
Esgotou-se o tempo de conexão de rede.
A tentativa de conexão com o servidor da Gracenote foi bem-sucedida.
O último acesso bem-sucedido à iTunes Store foi 2013-09-27 22:31:43.
Agradeceria muito se os amigos da comunidade me ajudassem.Make sure that your hosts file does not contain any entries that are pointing to servers other than gs.apple.com.
On Windows, the hosts file can be found here: C:\Windows\System32\drivers\etc\hosts.
On OSX, the hosts file can be found here: /private/etc/hosts. -
ITunes is unable to connect the server " iTunes não conecta com o servidor"
Microsoft Windows 7 x64 Ultimate Edition Service Pack 1 (Build 7601)
Sony Corporation VPCEH30EB
iTunes 10.6.1.7
O QuickTime não está disponível
FairPlay 1.14.37
Apple Application Support 2.1.7
Biblioteca do Atualizador do iPod 10.0d2
CD Driver 2.2.0.1
CD Driver DLL 2.1.1.1
Dispositivo Móvel Apple 5.1.1.4
Driver do Dispositivo Móvel da Apple 1.59.0.0
Bonjour 3.0.0.10 (333.10)
Gracenote SDK 1.9.5.502
Gracenote MusicID 1.9.5.115
Gracenote Submit 1.9.5.143
Gracenote DSP 1.9.5.45
Número de Série do iTunes 0036AE440EF3BFB0
O usuário atual é um administrador.
A data e a hora do local atual é 2012-05-31 15:55:20.
O iTunes não está sendo executado no modo de segurança.
A composição acelerada do WebKit está ativada.
HDCP é compatível.
Core Media é compatível.
Informações da Exibição de Vídeo
Intel Corporation, Intel(R) HD Graphics Family
**** Informações de Plug-ins Externos ****
Não há nenhum plug-in externo instalado.
iPodService 10.6.1.7 (x64) está atualmente sendo executado.
iTunesHelper 10.6.1.7 está atualmente sendo executado.
Apple Mobile Device service 3.3.0.0 está atualmente sendo executado.
**** Testes de Conectividade de Rede ****
Informações do Adaptador de Rede
Nome do Adaptador: {50AABBFE-3154-4EAF-B85E-17BDFE017E80}
Descrição: Atheros AR9285 Wireless Network Adapter
Endereço IP: 0.0.0.0
Máscara da Sub-rede: 0.0.0.0
Gateway Padrão: 0.0.0.0
DHCP Ativado: Sim
Servidor DHCP:
Cessão Obtida: Wed Dec 31 22:00:00 1969
A Cessão Expira: Wed Dec 31 22:00:00 1969
Servidores DNS:
Nome do Adaptador: {D179EF93-23E1-45F1-82FF-967B61C46D00}
Descrição: Realtek PCIe GBE Family Controller
Endereço IP: 192.168.254.115
Máscara da Sub-rede: 255.255.255.0
Gateway Padrão: 192.168.254.90
DHCP Ativado: Não
Servidor DHCP:
Cessão Obtida: Wed Dec 31 22:00:00 1969
A Cessão Expira: Wed Dec 31 22:00:00 1969
Servidores DNS: 192.168.254.90
Nome do Adaptador: {8CE4C975-44D1-40F6-B07A-F91A95955EF9}
Descrição: Microsoft Virtual WiFi Miniport Adapter
Endereço IP: 0.0.0.0
Máscara da Sub-rede: 0.0.0.0
Gateway Padrão: 0.0.0.0
DHCP Ativado: Sim
Servidor DHCP:
Cessão Obtida: Wed Dec 31 22:00:00 1969
A Cessão Expira: Wed Dec 31 22:00:00 1969
Servidores DNS:
Conexão Ativa: Conexão de rede local
Conectado: Sim
On-line: Sim
Usando Modem: Não
Usando LAN: Sim
Usando Proxy: Não
Informações do Firewall
O Firewall do Windows está inativo.
A tentativa de conexão ao site da Apple falhou.
Esgotou-se o tempo de conexão de rede.
A conexão básica com a loja falhou.
Esgotou-se o tempo de conexão de rede.
A tentativa de conexão com o servidor da Gracenote foi bem-sucedida.
Esgotou-se o tempo de conexão de rede.
O iTunes nunca teve acesso à iTunes Store com êxito.Close your iTunes,
Go to command Prompt -
(Win 7/Vista) - START/ALL PROGRAMS/ACCESSORIES, right mouse click "Command Prompt", choose "Run as Administrator".
(Win XP SP2 & above) - START/ALL PROGRAMS/ACCESSORIES/Command Prompt
In the "Command Prompt" screen, type in
netsh winsock reset
Hit "ENTER" key
Restart your computer.
If you do get a prompt after restart windows to remap LSP, just click NO.
Now launch your iTunes, Sync and see if it is working now.
If you are still having these type of problems after trying the winsock reset, refer to this article to identify which software in your system is inserting LSP:
iTunes 10.5 for Windows: May see performance issues and blank iTunes Store
http://support.apple.com/kb/TS4123?viewlocale=en_US -
Hello!
I am facing a problem.
Every time I run Disk Repair, it does not complete the process. It stops in the middle of the process and the report does not conclude. The correct it was finished with a message GREEN or RED, informing or not an error. But every time it stops in the middle of the process, not informing anything.
For the message to appear, I have to run it multiple times or restart the Mac into Recovery mode and run it by Disk Utility in offline mode.
I did this same test in another Macbook Pro like mine and the same thing happens.
See in first pic that proccess not was concluded, but the Utility finishid it.
In second pic, I've runned the Utility 2 times to the proccess be completed. And see that the report not is the same!!
Would anyone advise what might be happening?
Thanks.Startup in SafeMode first and try "Repair Disk".
Startup in Safe mode
http://support.apple.com/kb/PH14204?viewlocale=en_US -
Logger Service keeps shutting down and restarting
Hello,
I have upgraded my lab UCCE call center to v9.0
I have a simplexed environment
Ever since, the logger service keeps shutting down and restarting.
Recently, the node manager issued an error message and shut down the server
I tried to check some logs but I point out the problem, there are errors in different processes.
Attached are the logs.Hi,
if the NM tries to reload the server, it indicates a Problem (capital inteded).
Indeed, there's something interesting going on:
08:29:11:822 la-rpl Trace: Starting Recovery Key for Admin table is 6717118506000.0
08:29:11:822 la-rpl Trace: The largestkey = 7201232308043.0 >= startkey = 6717118506000.0
08:29:11:823 la-rpl Trace: To correct this problem: Stop logger service. Use ICMDBA tool to sync configuration data from its partner logger database. Restart logger service.
08:29:11:823 la-rpl Fail: Assertion failed: largestkey < startkey. File: ICRDB.CPP. Line 742
08:29:11:860 la-rpl Trace: CExceptionHandlerEx::GenerateMiniDump -- A Mini Dump File is available at logfiles\replication.exe_20130523082911824.mdmp
08:29:12:074 la-rpl Unhandled Exception: Exception code: 80000003 BREAKPOINTFault address: 754A3219 01:00012219 C:\Windows\syswow64\KERNELBASE.dllRegisters:EAX:00000000EBX:00000000ECX:00001890EDX:E1043F00ESI:015F8AB0EDI:00000005CS:EIP:0023:754A3219SS:ESP:002B:003CE2D8 EBP:003CE2E0DS:002B ES:002B FS:0053 GS:002BFlags:00000246Call stack:Address Frame754A3219 003CE2E0 DebugBreak+26EB1459C 003CE2EC EMSAbortProcess+C6EB1ACD1 003CF7F8 EMSReportCommon+1A16EB1ADBB 003CF818 EMSFailMessage+2B013BBE5A 003CF8A8 ICRDb::ICRDb+44A013B2FE2 003CF9B8 main+582015D96C2 003CF9FC NtCurrentTeb+174767333AA 003CFA08 BaseThreadInitThunk+1277449EF2 003CFA48 RtlInitializeExceptionChain+6377449EC5 003CFA60 RtlInitializeExceptionChain+36
The short version: configuration data is corrupt.
The longer version: the above message in red informs about the result of a sanity check. Each configuration change creates a new row in one of the tables holding the config info, and each row contains a RecoveryKey which is usually a large number incremented by the insertion. The error message says the largest key (= last key) contains a value that is lower than the first key. Naturally, this is something to consider for a lonely philosopher, but the rigid world of Cisco ICM does not allow metaphysical phenomena. Lower numbers are supposed to be lower than higher numbers.
This, of course, raises an exception and the Logger service restarts. If there are too many restarts, the Node Manager kicks in and restarts the machine - this is just a mechanism that prevents a larger extent of data corruption.
Now, if there's an other side Logger - fine, as the error message suggests, you can initiate manual replication (provided the other Logger database contains valid information).
Unfortunately, as you have written, this is a side A only environment. This may mean:
- accepting the situation, stopping ICM, throwing out the logger database, recreating it and reinstalling the Logger service,
- poking around in various tables to check what may be saved - this may mean the beginning of an adventure.
G. -
Hey guys,
I'm running into a memory leak and was reading some other threads where people were having their own memory leaks. Is there a way through NetBeans to track memory usage or something to figure out what is consuming memory? My memory leak sounds similar to this gentleman's: [http://forums.sun.com/thread.jspa?threadID=5409788] and [http://forums.sun.com/thread.jspa?threadID=5357401]
Setup:
I have a mySQL database call that returns a bunch of results and in the end converts each record into its own custom node which then gets put into a sequence, which is then given to a listEventsNode (a custom node VBox) and finally put on the stage. As a note each custom node has its own animations, events, images, and shapes.
listEventsNode gets its list of custom nodes from a publicly accessible sequence variable where its contents is simply cleared and new nodes are added by the next MySQL search. I cleared the eventSequence by using delete myCustomNodeSequence.
I even go as far as setting the same sequence null (myCustomNodeSequence = null;). This unfortunately doesn't make any difference in terms of memory usage. java.exe will reach 100MB then crash.
the listEventsNode is bound with eventSequence, this is to ensure that changes to the sequence of custom nodes are immediately reflected in the Vbox (listEventsNode).
ListEventsNode is on the main stage and there is only one instance of it, but what changes is the content in the eventSequence. Even if I clear the contents of the eventSequence, it doesn't appear to "clean up" the memory.
The way I'm doing it is probably breaking every rule in the book. I should probably make it so listEventsNode is its own object which isn't bound to any external variables (such as eventSequence) and in the event a new search takes place I simply delete the listEventsNode and when a new search is complete, it re-adds the node to the scene. Am I on the right track here?
Is there a good "best practices" for JavaFX? For example, a typical mistake that would cause a node to "recreate" itself over and over again in memory when the programmer may have thought it was simply being "written over"? Does this make sense? Because I have a feeling that my application is not deleting the custom nodes that were created for the eventSequence and even if the eventSequence is "deleted" and re-assigned with new custom nodes, the original or previous custom nodes are still residing in memory.
Let me know if you need to see the source or any logs/readouts from NetBeans during execution if this will help.
Thanks for taking the time to read this.
Cheers,
Nik.Your heap usage looks pretty typical. In scenario 5, I think you are simply running out of memory. I doubt its a leak inside the javafx runtime (although it could be).+
I think you might be right. It's running out of memory and I may have to increase the heap size.
Say that my application legitimately needs more memory to operate, and I need to increase the heap size. How does this work if you have a fully deployed application? Is the heap size information built into the application itself so that when the jvm runs the application, it allocates the appropriate amount of memory? I've increased the heap size from 64mb to 128mb, and I added many many nodes and I still crapped out when I hit the 128mb ceiling. I changed it to 512 and I added a TON of nodes (when you click a node from the VBox, it adds a miniature version of the node to the scene graph) and I'm just under 200MB. I plan on setting a cap to how many concurrent additional nodes can be placed on the scene graph, which will help.
If you deploy this as is, how does the application utilize memory if you've adjusted the heap size? Or is this specific to the IDE only?
Do you know what objects are on the heap? Can you compare what objects are on the heap from one scenario to the next?+
Where can I find this information in NetBeans profiler?
Do you have a lot of images? Are they thumbnails or are they images scaled down to thumbnail size?+
Actually, yes I am using a scaled down thumbnail size of the original image. The original image files are PNG format, 60x60 pixels, and about 8kb in size. I simply use the "FitWidth:" property to scale the image down. I was doing some more reading before I went to bed and I was going to use an alternative way to scale the image down. By simply doing this, the initial heap usage off the 500 node search went down form 44MB to 39MB. It's still slower on consecutive searches versus the first, but it's stable.
Edit: I've used the width: property to downsize the image and it looks like I'm not running into that heap crash as fast but this poses a problem where I need to have the full size of the image available when a custom node is selected. What's the best way of doing this? I should probably store the image location in a string and recreate the image when I need it in full size since there is only one full size version of it on the screen at a given time. I've also completely disabled the addition of a picture in my custom node; it appears these images don't take up a lot of space since they are very small. I save an additional 3-5MB in heap space if I completely disable the pictures and have just the nodes themselves. Each node has animation effects (i.e. fading in/out of colors, changing of color if selected). Although the class itself is pretty dang long in comparison with any other classes I have.
Are you clearing the nodes from your scene content before the search or after? If after, are you creating the new nodes before clearing out the old?+
Yes, I have a function that reassigns the stage.scene.content sequence omitting the custom vbox that houses the list of custom nodes prior to the next search. The "cleanUp()" function is called prior to the insertion of the new custom vbox.
It might be useful to turn on verbose garbage collection (-verbose:gc on the java command line) just to see what's happening in gc.+
What is this exactly? I tried putting in System.gc() but I'm not sure if I'm seeing any difference yet.
Edit: Actually, I've placed System.gc() after I run my cleanUp() function and I'm noticing the heap usage is more conservative. Seems to clear more often than it did before. But yes, the underlying problem of my running out of memory is to be looked at.
You might also (just as an experiment) force garbage collection between your searches.+
This seems to work well with smaller result sets. However, a search that produces over 500 custom nodes in a custom VBox uses more than half of the available heap size, so the next time it tries to do the same search it just crashes like you mentioned in your first point. The memory simply runs out. What I don't get is if I "delete" the custom vbox prior to inserting it, the memory doesn't seem to be released immediately. From what I'm reading about the garbage collector, it doesn't exactly do things in a prompt fashion. -
Safari for windows and itunes won't connect to the internet
Hi all,
I tried to connect to the itunes store this morning and it does't work. I can't tell you the last time I actually used the itunes store. Months ago at least. I'm not getting an error message or anything. The bar gets less than half way accross then just stops.
Second problem. After finally getting fed up with internet explorer I decided to change my browser to Safari (for windows). It insalled fine and opens ok. But it just won't load any web pages. Again, no error messages or anything. The bar gets part way accross then just stops.
I have tried all of the tips on the apple website and I've also tried all the tips in the forums that have worked for everyone else but not me.
I've added Safari and checked that itunes is allowed in my firewall. Even tried turning my firewall off.
I've checked that I'm not connecting through a proxy server.
I've tried resetting the host file.
All of the software on my computer is up to date.
I've tried flushing the DNS settings.
I've run diagnostics in itunes. (All ok)
My internet explorer runs ok so there is no problem with my internet connection.
I've tried just about everything I can think of and nothing works so any suggestions would be greatly appreciated.
Many thanks,
EmmaI'm also having this problem for about 3 months now. Tried contacting twice with Apple Support and after a few tips, they just stopped responding. Tried uninstalling the entire Apple Suite (QuickTime, iTunes, Safari, Bonjour, etc.) and still didn't work. APPLE, PLEASE HELP US HERE!
I also ran a diagnostic and found a problem to connect to the Store (sorry for the diagnostic in portuguese... system language):
Microsoft Windows 7 x64 Ultimate Edition Service Pack 1 (Build 7601)
System manufacturer System Product Name
iTunes 10.4.1.10
QuickTime 7.7
FairPlay 1.12.20
Suporte para Aplicativos Apple 2.0.1
Biblioteca do Atualizador do iPod 10.0d2
Driver de CD 2.2.0.1
DLL do Driver de CD 2.1.1.1
Dispositivo Móvel Apple 3.4.1.2
Driver do Dispositivo Móvel da Apple 1.57.0.0
Bonjour 3.0.0.2 (333.2)
SDK da Gracenote 1.9.1.485
MusicID da Gracenote 1.9.1.102
Envio da Gracenote 1.9.1.133
DSP da Gracenote 1.9.1.43
Número de Série do iTunes 0037B1A011C6CE18
O usuário atual não é um administrador.
A data e a hora do local atual é 2011-09-30 20:45:13.
O iTunes não está sendo executado no modo de segurança.
A composição acelerada do WebKit está ativada.
HDCP não é compatível.
Core Media é compatível.
Informações da Exibição de Vídeo
NVIDIA, NVIDIA GeForce 9500 GT
**** Informações de Plug-ins Externos ****
Não há nenhum plug-in externo instalado.
iPodService 10.4.1.10 (x64) está atualmente sendo executado.
iTunesHelper 10.4.1.10 está atualmente sendo executado.
Dispositivo Celular da Apple service 3.3.0.0 está atualmente sendo executado.
**** Testes de Conectividade de Rede ****
Informações do Adaptador de Rede
Nome do Adaptador: {E14933F0-7331-4D75-B02E-82060957F06F}
Descrição: Dispositivo Bluetooth (Rede Pessoal)
Endereço IP: 0.0.0.0
Máscara da Sub-rede: 0.0.0.0
Gateway Padrão: 0.0.0.0
DHCP Ativado: Sim
Servidor DHCP:
Cessão Obtida: Wed Dec 31 22:00:00 1969
A Cessão Expira: Wed Dec 31 22:00:00 1969
Servidores DNS:
Nome do Adaptador: {62B0A88D-17A9-44AD-8D74-E75F1C8B9747}
Descrição: Anchorfree HSS Adapter
Endereço IP: 0.0.0.0
Máscara da Sub-rede: 0.0.0.0
Gateway Padrão: 0.0.0.0
DHCP Ativado: Sim
Servidor DHCP:
Cessão Obtida: Wed Dec 31 22:00:00 1969
A Cessão Expira: Wed Dec 31 22:00:00 1969
Servidores DNS:
Nome do Adaptador: {CC860C72-3DAF-4110-8A19-0B89F71EF4B6}
Descrição:
Endereço IP: 0.0.0.0
Máscara da Sub-rede: 0.0.0.0
Gateway Padrão: 0.0.0.0
DHCP Ativado: Sim
Servidor DHCP:
Cessão Obtida: Wed Dec 31 22:00:00 1969
A Cessão Expira: Wed Dec 31 22:00:00 1969
Servidores DNS:
Nome do Adaptador: {A62C927C-DBA9-4230-81A2-CCB3501C2622}
Descrição: Realtek PCIe GBE Family Controller
Endereço IP: 192.168.0.137
Máscara da Sub-rede: 255.255.255.0
Gateway Padrão: 192.168.0.1
DHCP Ativado: Sim
Servidor DHCP: 192.168.0.1
Cessão Obtida: Fri Sep 30 20:19:45 2011
A Cessão Expira: Fri Oct 07 20:19:45 2011
Servidores DNS: 8.8.8.8
8.8.4.4
Nome do Adaptador: {3F9E0C26-11A0-4099-ACED-BD314B167697}
Descrição: VirtualBox Host-Only Ethernet Adapter
Endereço IP: 192.168.56.1
Máscara da Sub-rede: 255.255.255.0
Gateway Padrão: 0.0.0.0
DHCP Ativado: Não
Servidor DHCP:
Cessão Obtida: Wed Dec 31 22:00:00 1969
A Cessão Expira: Wed Dec 31 22:00:00 1969
Servidores DNS:
Conexão Ativa: Conexão de rede local
Conectado: Sim
On-line: Sim
Usando Modem: Não
Usando LAN: Sim
Usando Proxy: Não
Suporte para SSL 3.0: Ativado
Suporte para TLS 1.0: Ativado
Informações do Firewall
O Firewall do Windows está ativo.
O iTunes NÃO está habilitado no Firewall do Windows.
A tentativa de conexão ao site da Apple foi bem-sucedida.
A tentativa de conexão para navegar pela iTunes Store foi bem-sucedida.
A tentativa de conexão para comprar na iTunes Store foi bem-sucedida.
A tentativa de conexão com o servidor de ativação do iPhone foi bem-sucedida.
A tentativa de conexão com o servidor de atualização de firmware foi mal-sucedida.
Esgotou-se o tempo de conexão de rede.
A tentativa de conexão com o servidor da Gracenote foi bem-sucedida.
O último acesso bem-sucedido à iTunes Store foi 2011-09-30 20:41:29.
Apple, once again I ask you to help us on this one. In the next holliday I'll nuy a tablet and a phone to my mother and I'm considering getting an Android. I have a lot of apps in my library now, but I'll not format my PC just to get iTunes and Safari working. Sorry, but if it doesn't work or we don't receive any response, I'll ditch Apple products for good. -
I have setup a profile card which displays information about individuals by pulling data from an XML database.
I have multiple text fields and couple movie clips that display images but i need a datagrid to display stats for each individual.
The stat information is set as attributes on a array of XML nodes each node is a year.
Example XML
<hockey>
<profile>
<name>Wayne Gretzky</name>
<image>pic1</image>
<dob>Jan 26, 1961</dob>
<position>Centre</position>
<height>6'0"</height>
<weight>185lbs</weight>
<history>"important information"</history>
<medal_record>
<medal standing ="Silver" Event =" 1981 Canada Cup" sport="Ice Hockey"/>
<medal standing ="Gold" Event =" 1984 Canada Cup" sport="Ice Hockey"/>
<medal standing ="Gold" Event =" 1987 Canada Cup" sport="Ice Hockey"/>
<medal standing ="Gold" Event =" 1991 Canada Cup" sport="Ice Hockey"/>
<medal standing ="Silver" Event =" 1996 World Cup of Hockey" sport="Ice Hockey"/>
</medal_record>
</profile>
<profile>
<name>Wayne Gretzky2</name>
<image>pic2</image>
<dob>Jan 26, 1962</dob>
<position>Right Wing</position>
<height>6'1"</height>
<weight>205lbs</weight>
<history>"important information"</history>
<medal_record>
<medal standing ="Gold" Event =" 1981 Canada Cup" sport="Ice Hockey"/>
<medal standing ="Bronze" Event =" 1984 Canada Cup" sport="Ice Hockey"/>
<medal standing ="Silver" Event =" 1987 Canada Cup" sport="Ice Hockey"/>
<medal standing ="Silver" Event =" 1991 Canada Cup" sport="Ice Hockey"/>
<medal standing ="Gold" Event =" 1996 World Cup of Hockey" sport="Ice Hockey"/>
</medal_record>
</profile>
</hockey>
The red information is what i need to get displayed by the Data Grid for each profile.
Standing
Event
Sport
Gold
1981 Canada Cup
Ice Hockey
Bronze
1984 Canada Cup
Ice Hockey
The swf has buttons to cycle through the profiles which loads the new information from the XML.
If you have a good understanding of how the dataGRIDs work please let me know if you can help as this is the last problem holding me from finishing this.
Thanks in advance.Update... I got the data pulling in but it doesnt change as the profile changes with the rest of the data.
-
Lightroom supports Fuji X10 EXR RAF files since version 4 Beta (and v3.6), but unfortunately it is not working properly. There are two different EXR modes and Lightroom seems to support both, but the outcome is not right.
1) Loading 6 MP EXR DR (200/400) mode where images of the two sensor halves are saved in the RAF file leads to wrong colors. Specifically the attenuated highlights of the longer exposed half are turned to purple while they should at least be neutral grey (attenuated clipped white). There also are color artifacts on the edges between the two blended halves when clipped highlights are present.
Generally I would like to be able to have more control over the whole blending process and especially be able to get more information out of clipped highlights. Both Lightroom and the in-camera JPGs just ungracefully attenuate clipped whites from the longer exposed half to gray, but do *not* use the unclipped information of the shorter exposed half to get more information out of them.
Even though Capture One also doesn't give any control over the blending process I was able to pull out detail/information from those highlights while in Lightroom I can only turn bright purple into dark purple regardless of whatever exposure relevant slider I use.
2) Loading 12 MP full resolution RAF files generally works, but there is _less_ detail in them than in out-of-camera JPG, regardless of what filter/sharpness settings I tried. Lightrooms lens correction for the X10 works better than the in-camera one in that it does not compress the middle of the image (by cutting more off the sides), so in the middle there might be slightly mode detail out of Lightroom. But the rest of the image only gets detail on a level somewhere in between 6 MP ooc JPG and MP ooc JPG (meaning more detail than 6 MP, but less than 12 MP).
I can imagine that the demosaicing process could be optimized, but another culprit might be Lightroom's sharpening method, especially where the "Detail" slider is concerned. The Detail slider seems to have a hard time with EXR pattern in general and especially EXR noise pattern. Increasing Detail on Lightroom's Sharpening filter mostly increases noise and quite considerably so. Especially on 12 MP full resolution files the labyrinth like noise pattern of the EXR images gets sharpened a lot by the Detail slider.
LR's luminance filter seems to suffer from EXR specific noise patterns, too. Again it has a hard time finding the right balance of eliminating noise while keeping detail, at least compared to the in-camera noise filter (and some other RAW software I tried).
One more thing that I am not sure about whether it is a problem of RAW software (aka LR) or the camera: While reds in JPG may either be somewhat oversaturated while at other times clip the red channel into turning reds to pink I noticed that in LR they may appear more orange. Pushing orange towards red via sliders helps with that, but I wonder if this is a form of misinterpretation by Lightroom or if the raw file really contains more orange than red information?
Thanks for any answers in advance!"High Resolution" DR (ISO equal or higher than DR) in M size should be usable. L size is usable, too, but the detail is lacking (more than 6 mp, but less than 12 mp ooc JPGs). EXR DR RAW files are a special case. It's not easy to even create them with the camera, because you have to use RAW + JPG and ISO below DR and then shoot a situation where ISO below 400 is enough (broad daylight).
And these files are usable, but colors are somewhat off in LR, which can at least partly be managed via HSL. It's not perfect, because highlights of the longer exposed sensor half are handled wrong (from my point of view), but I send some example images now. We need to give Chan some time, because I only sent the files a few days ago.
One thing that doesn't work well between LR is EXR kind of noise and LR's sharpening. Some people called that "reticulation pattern" on the DPreview forum. What happens is that LR's sharpening tends to sharpen noise more distinct than anything else, so you need to keep that "Detail" slider down and overally watch sharpening. Also LR's luminance noise-reduction tends to remove more detail than the in-camera one and the color noise slider has to be used with caution in order to keep saturation (default value is too high).
It's all workable, but not exactly in love with each other. -
LMS 4: Donde puedo encontrar un paso a paso (step by step)
CiscoWorks LMS4 Soy nuevo con esta herramienta, y la verdad es que tiene muchas cosas y no se por cual empezar. Si hay algún manual o si me pueden guiar por aquí se los agradezco.
Gracias.
Sent from Cisco Technical Support iPhone AppSí LMS es una poderosa herramienta que es capaz hacer lo que muchos fuera de la caja. Parece que esta es su primera interacción con el LMS y hay un montón de guías y soporte para esta herramienta.
Usted puede visitar el siguiente enlace, que es el portal dedicado paraCiscoWorks:
http://www.cisco.com/en/US/products/ps11200/index.html
La característica principal de distribución de sabios en LMS para la gestión de dispositivos son los siguientes:
Principales Áreas Funcionales y Beneficios
* Seguimiento y solución de problemas
Identificar proactivamente y rápidamente solucionar problemas de red antes de que afecten a los usuarios finales y los servicios con fuera de-la-caja de cuadros de mando preconfigurados de vigilancia.
*Gestión de la Configuración
Simplifica el despliegue de nuevas tecnologías y cambios en la red a través deflujos de trabajo guiados basados en las mejores prácticas de Cisco con una función de plantillas de configuración que ayudan a reducir los errores.
Cumplimiento y Gestión de Auditoría
Motor de cumplimiento actualizable ofrece modelos extensa de la industria, las empresas, TI y las políticas tecnológicas y la visibilidad rápido en el estado de cumplimiento de la red.
informes completos
Obtener inmediata puesta al día la información sobre la red a través de informes flexible para el inventario, seguimiento de los usuarios, el cumplimiento, el interruptor de uso de los puertos, al final de su venta, PSIRT, y otras áreas críticas.
Centros de Trabajo
Fácil de gestionar todas las fases del ciclo de vida de extremo a extremo deCisco con valor agregado y soluciones de tecnologías, tales como Medianet,EnergyWise, TrustSec e Identidad, Auto Smartports, y Smart Install.
Algunas de las Guías del usuario que tienen información detallada sobre LMS ysus características, funciones segmentadas son los siguientes:
La administración de Cisco de soluciones de gestión del primer LAN 4.2
Gestión de la Configuración de Cisco LAN Management Solution 4.2 el primer
Gestión de stocks con Cisco LAN Management Solution Primer 4.2
Supervisión y solución de problemas con la solución Cisco Managmement PrimerLAN 4.2
Informes de Gestión con Cisco LAN Management Solution Primer 4.2
Centros Tecnológicos de trabajo en la solución de Cisco LAN Management 4.2 el primer
Yo no sé español y han utilizado los servicios de traductor para responder a esta pregunta, por favor, por lo tanto, omitir un error.
Espero que esto ayudará.
-Gracias
Vinod -
Unable to call Container Managed Entity Bean
Hi
I am developing a JMS application using NetBeans 5.5.1 and Sun Java Application Server 9.0 and J2EE 1.4.When I run the application client it throws me following EXCEPTION:
{color:#ff0000}Sep 9, 2010 1:43:43 PM com.sun.enterprise.appclient.MainWithModuleSupport <init>
WARNING: ACC003: Application threw an exception.
javax.naming.NameNotFoundException: No object bound to name java:comp/env/jms/MDBDestinationFactory
at com.sun.enterprise.naming.NamingManagerImpl.lookup(NamingManagerImpl.java:751)
at com.sun.enterprise.naming.java.javaURLContext.lookup(javaURLContext.java:156)
at com.sun.enterprise.naming.SerialContext.lookup(SerialContext.java:307)
at javax.naming.InitialContext.lookup(InitialContext.java:392)
at jmsdemo.Main.main(Main.java:30)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:597)
at com.sun.enterprise.util.Utility.invokeApplicationMain(Utility.java:232)
at com.sun.enterprise.appclient.MainWithModuleSupport.<init>(MainWithModuleSupport.java:329)
at com.sun.enterprise.appclient.Main.main(Main.java:180)
Exception in thread "main" java.lang.RuntimeException: java.lang.reflect.InvocationTargetException
at com.sun.enterprise.appclient.MainWithModuleSupport.<init>(MainWithModuleSupport.java:340)
at com.sun.enterprise.appclient.Main.main(Main.java:180)
Caused by: java.lang.reflect.InvocationTargetException
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:597)
at com.sun.enterprise.util.Utility.invokeApplicationMain(Utility.java:232)
at com.sun.enterprise.appclient.MainWithModuleSupport.<init>(MainWithModuleSupport.java:329)
... 1 more
Caused by: javax.naming.NameNotFoundException: No object bound to name java:comp/env/jms/MDBDestinationFactory
at com.sun.enterprise.naming.NamingManagerImpl.lookup(NamingManagerImpl.java:751)
at com.sun.enterprise.naming.java.javaURLContext.lookup(javaURLContext.java:156)
at com.sun.enterprise.naming.SerialContext.lookup(SerialContext.java:307)
at javax.naming.InitialContext.lookup(InitialContext.java:392)
at jmsdemo.Main.main(Main.java:30)
... 7 more
{color}{color:#000000}Source Code for Message Driven Bean:
package jmsdemo;
import javax.ejb.*;*
import javax.jms.Message;
import javax.jms.MessageListener;
import javax.jms.TextMessage;
*public class MDBBean implements MessageDrivenBean, MessageListener {*
private MessageDrivenContext context;
*public void setMessageDrivenContext(MessageDrivenContext aContext) {context = aContext;}*
public void ejbCreate() {}
public void ejbRemove() {}
*public void onMessage(Message aMessage) {*
if(aMessage instanceof TextMessage)
TextMessage t = (TextMessage)aMessage;
try
System.out.println("Received message : " + t.getText());
*}catch(Exception e) {e.printStackTrace();}*
Source code for JMS Client:
package jmsdemo;*
import javax.jms.;
import javax.naming.*;*
*public class Main {*
*public Main() {*
public static void main(String[] args) throws Exception
*// TODO code application logic here*
InitialContext ic = new InitialContext();
ConnectionFactory cf = (ConnectionFactory)ic.lookup("java:comp/env/jms/MDBDestinationFactory");
Destination dest = (Queue) ic.lookup("java:comp/env/jms/MDBBean");
Connection con = cf.createConnection();
Session session = con.createSession(false,Session.AUTO_ACKNOWLEDGE);
MessageProducer mp = session.createProducer(dest);
TextMessage tm = session.createTextMessage();
tm.setText("Hello world .,.");
System.out.println("Sending message ...");
mp.send(tm);
con.close();
Generating code for ejb-jar.xml
<?xmlversion="1.0"encoding="UTF-8"?>*
*<ejb-jarversion="2.1"xmlns="[http://java.sun.com/xml/ns/j2ee%22xmlns:xsi=%22http://www.w3.org/2001/XMLSchema-instance%22xsi:schemaLocation=%22http://java.sun.com/xml/ns/j2eehttp://java.sun.com/xml/ns/j2ee/ejb-jar_2_1.xsd]">*
*<display-name>JMSDemo-ejb</display-name>*
*<enterprise-beans>*
*<message-driven>*
*<display-name>MDBMDB</display-name>*
*<ejb-name>MDBBean</ejb-name>*
*<ejb-class>jmsdemo.MDBBean</ejb-class>*
*<transaction-type>Container</transaction-type>*
*<message-destination-type>javax.jms.Queue</message-destination-type>*
*<message-destination-link>MDBDestination</message-destination-link>*
*<activation-config>*
*<activation-config-property>*
*<activation-config-property-name>acknowledgeMode</activation-config-property-name>*
*<activation-config-property-value>Auto-acknowledge</activation-config-property-value>*
*</activation-config-property>*
*<activation-config-property>*
*<activation-config-property-name>destinationType</activation-config-property-name>*
*<activation-config-property-value>javax.jms.Queue</activation-config-property-value>*
*</activation-config-property>*
*</activation-config>*
*</message-driven>*
*</enterprise-beans>*
*<assembly-descriptor>*
*<container-transaction>*
*<method>*
*<ejb-name>MDBBean</ejb-name>*
*<method-name>*</method-name>
</method>
<trans-attribute>Required</trans-attribute>
</container-transaction>
<message-destination>
<display-name>DestinationforMDB</display-name>
<message-destination-name>MDBDestination</message-destination-name>
</message-destination>
</assembly-descriptor>
</ejb-jar>
Please let me when I am going wrong.
Thanks in advance
Senthil{color}Hi
I am using sun java application server 9.0 and netbeans 5.5.1. For your information the Netbeans 5.5.1 has created already Queue in the sun java application server 9.0 when I created Message driven bean and I am able to see the queue connection in the Sun application server admin console. Even then I getting the same exception displayed below:
{color:#ff0000}Sep 11, 2010 11:45:17 AM com.sun.enterprise.appclient.MainWithModuleSupport <init>
WARNING: ACC003: Application threw an exception.
javax.naming.NameNotFoundException: No object bound to name java:comp/env/jms/MDBDestinationFactory
at com.sun.enterprise.naming.NamingManagerImpl.lookup(NamingManagerImpl.java:751)
at com.sun.enterprise.naming.java.javaURLContext.lookup(javaURLContext.java:156)
at com.sun.enterprise.naming.SerialContext.lookup(SerialContext.java:307)
at javax.naming.InitialContext.lookup(InitialContext.java:392)
at jmsdemo.Main.main(Main.java:30)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:597)
at com.sun.enterprise.util.Utility.invokeApplicationMain(Utility.java:232)
at com.sun.enterprise.appclient.MainWithModuleSupport.<init>(MainWithModuleSupport.java:329)
at com.sun.enterprise.appclient.Main.main(Main.java:180)
Exception in thread "main" java.lang.RuntimeException: java.lang.reflect.InvocationTargetException
at com.sun.enterprise.appclient.MainWithModuleSupport.<init>(MainWithModuleSupport.java:340)
at com.sun.enterprise.appclient.Main.main(Main.java:180)
Caused by: java.lang.reflect.InvocationTargetException
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:597)
at com.sun.enterprise.util.Utility.invokeApplicationMain(Utility.java:232)
at com.sun.enterprise.appclient.MainWithModuleSupport.<init>(MainWithModuleSupport.java:329)
... 1 more
Caused by: javax.naming.NameNotFoundException: No object bound to name java:comp/env/jms/MDBDestinationFactory
at com.sun.enterprise.naming.NamingManagerImpl.lookup(NamingManagerImpl.java:751)
at com.sun.enterprise.naming.java.javaURLContext.lookup(javaURLContext.java:156)
at com.sun.enterprise.naming.SerialContext.lookup(SerialContext.java:307)
at javax.naming.InitialContext.lookup(InitialContext.java:392)
at jmsdemo.Main.main(Main.java:30)
... 7 more
Java Result: 1
{color}
The following connection properties {color:#0000ff}*jmsCF-jms_MDBBean.sun-resource_*{color} file:
<?xml version="1.0" encoding="UTF-8"?>
<resources>
<connector-resource enabled="true" jndi-name="jms/MDBDestinationFactory" object-type="user" pool-name="jms/MDBDestinationFactory">
<description/>
</connector-resource>
<connector-connection-pool connection-definition-name="javax.jms.QueueConnectionFactory" fail-all-connections="false" idle-timeout-in-seconds="300" is-connection-validation-required="false" max-pool-size="32" max-wait-time-in-millis="60000" name="jms/MDBDestinationFactory" pool-resize-quantity="2" resource-adapter-name="jmsra" steady-pool-size="8"/>
</resources>
The following connection properties {color:#0000ff}_jms-jms_MDBBean.sun-resource_{color} file:
<?xml version="1.0" encoding="UTF-8"?>
<resources>
<admin-object-resource enabled="true" jndi-name="jms/MDBBean" object-type="user" res-adapter="jmsra" res-type="javax.jms.Queue">
<description/>
<property name="Name" value="MDBBean"/>
</admin-object-resource>
</resources>
Please help.
Thanks in advance
Senthil -
Switch Statement - orphaned case
Hello All
Could anyone explain why i get orphaned case when compiling ? ive never seen it before ?
After some searching all i could find was to remove ; from Switch(input);Any ideas ? thankyou
import java.util.*;
public class Menu
public static void main (String[] args)
Scanner kybd = new Scanner (System.in);
System.out.println ("Please Chose from 1-4");
System.out.println("1. Good Morning");
System.out.println("2. Good Afternoon");
System.out.println("3. Good Evening");
System.out.println("4. Exit");
int input = 0;
do
input = kybd.nextInt();
Switch(input);
case 1:System.out.println("Good Morning");
break;
case 2:System.out.println("Good Afternoon");
break;
case 3:System.out.println("Good Evening");
break;
case 4:System.out.println("Exit");
System.exit(4);
break;
while (input !=4);
}}heya all sorry may have been a bit confusing what i said , i did remove the ; but i get ; expected
And
Exception in thread "main" java.lang.RuntimeException: Uncompilable source code
at Menu.main(Menu.java:21)
this is shown as orphaned case by a red icon in netbeans.
Could anyone explain what an orphaned case is ?
import java.util.*;
public class Menu
public static void main (String[] args)
Scanner kybd = new Scanner (System.in);
System.out.println ("Please Chose from 1-4");
System.out.println("1. Good Morning");
System.out.println("2. Good Afternoon");
System.out.println("3. Good Evening");
System.out.println("4. Exit");
int input = 0;
do
input = kybd.nextInt();
Switch(input)
case 1:System.out.println("Good Morning");
break;
case 2:System.out.println("Good Afternoon");
break;
case 3:System.out.println("Good Evening");
break;
case 4:System.out.println("Exit");
System.exit(4);
break;
while (input !=4);
}} -
hi anyone knows personnel, such as changing color of the label at run time and return to original color
<?xml version="1.0" encoding="utf-8"?>
<mx:Application xmlns:mx="http://www.adobe.com/2006/mxml" layout="absolute">
<mx:Panel id="panel" width="469" height="415" headerHeight="90" layout="absolute" horizontalCenter="27" verticalCenter="-10">
<mx:Button
id="button" click="{effect()}" x="10" y="208" width="122"
</mx:Button>
<mx:Label id="inform" x="140" y="100.8" width="86" />
</mx:Panel>
<mx:Script>
<![CDATA[
public function effect():void
// I go to red
inform.text="test!".setStyle("color", 0xff0000);
glowImage.play();
//after the end return to the blue
inform.setStyle.setStyle("color", "Blue");
]]>
</mx:Script>
<mx:Glow id="glowImage" duration="1000"
alphaFrom="1.0" alphaTo="0.3"
blurXFrom="0.0" blurXTo="50.0"
blurYFrom="0.0" blurYTo="50.0"
color="0x00FF00" target="{inform}"/>
</mx:Application>If this post answers your question or helps, please mark it as such.
I have to ask what you are trying to do, because this is an interesting use of an effect.
<?xml version="1.0" encoding="utf-8"?>
<mx:Application xmlns:mx="http://www.adobe.com/2006/mxml"
layout="absolute">
<mx:Panel id="panel" width="469" height="415"
headerHeight="90" layout="absolute" horizontalCenter="27"
verticalCenter="-10">
<mx:Button id="button" click="effect();"
x="10" y="208" width="122"/>
<mx:Label id="inform" x="140" y="100.8" width="86" />
</mx:Panel>
<mx:Script>
<![CDATA[
public function effect():void{
inform.text="test!";
glowImage.play();
]]>
</mx:Script>
<mx:Glow id="glowImage" duration="1000" alphaFrom="1.0"
alphaTo="0.3" blurXFrom="0.0" blurXTo="50.0"
blurYFrom="0.0" blurYTo="50.0"
color="0x00FF00" target="{inform}"
effectStart="inform.setStyle('color', 0xff0000);"
effectEnd="inform.setStyle.('color', 0x0000ff);" />
</mx:Application> -
Hi,
I know this question has been asked before but I can't seem to find the answer. Has anyone ever build or knows about a FileListener class? I know about File.lastModified but would prefer a different solution. I read some post about netbeans having a FileEvent class but I can't seem to find information on netbeans.
Any help would be appreciated.
TIA
MaizoHi,
Yes, I found something on a different site that works great. The URL for the article is: http://www.jadcentral.com/newscentral/idg/articles/dynamic.properties.jsp
I hope this article helps you. It sure helped me. I was planning on dropping a line to the author thanking him.
Good luck,
Maizo
Maybe you are looking for
-
Custom F4 help in a BSP application working in Mozilla but not in IE
Hi, I have created a custom F4 help in a BSP application. It is working in Mozilla but not in IE. I tried enabling javascript as well but still it is not working. Can someone please suggest a possible solution for this?
-
Cannot create mysites from powershell: Original XSLT List View Web Part not found
I have a bizarre problem in my SharePoint 2013 farm. This does not occur in my test farm, only in the farm we were going to go live with. I'm on windows Server 2012, SQLServer 2012 SP1, SharePoint 2013 April CU. 1 appserver/centraladmin server, 2 web
-
Datagrid within Datagrid - Rows not resizing to fit content
Hi, I have a datagrid with a custom item renderer that renders another data grid... so one column will render datagrids within the outer datagrid. The problem is that the row does not size to fit the inner datagrid. I can't set the rowHeight on the
-
Re: Function Module to Validate ESS Id and Password
Hi , Is there is any function module / BAPI to validate the ESS Id and Password . Regards, Vijay
-
Unable to create partition from free space on hard drive
I have a segment of free space on my Macbook Air's hard drive. It was formerly a Bootcamp partition. When I try to create a new partition from this free space in Disk Utility, it prompts me to start creating the partition, but nothing happens after t