Red LED: Adapter Engine ? Help

Hi All,
The status of Adapter Engine in Integration Server is showing status "RED". Displays the messages components contains errors.
Please advise me on resolving the issue .
Kind Regards
Shiva

Hello
As your Adapter engine status in the monitoring is red you can find out which particular channel is having errors. To do this Go to Component Monitoring and click the Adapter Engine under components and then click the Communication Channel Monitoring.
A separate Window would appear for communication channel monitoring and then in filter select Status->Channels with error.
and click Use filter.
it will show you all the channels with errors.
and you can selecting each with radio button you can see the error details and modify accordingly.

Similar Messages

S750: control pod flashing red led READ AND HELP!

Hi, basically my S750 set of speakers isnt working correctly. When im listening to music and start to pump the voloume up it just stops and the control pod goes back to standy mode with the red led light. Sometime it keeps flashing and I can hear a clicking noise coming from the sub, when the control pod was flashing and the sub was making a clicking noise i looked at the back and saw the green light flickering. Can anybody help me please

I did thing is its really a lot of hassle. Im based in England, and I need to call a number in dublin (International call) and then pay 6.75 to a 'tutoring session' which will last 30 minutes. That's why I was trying to resolve my problem on here, they don't even know what it could be either. I have dropped my control pod a few times on the floor, so i don't know if it could be faulty now, like a wire may have come loose inside,but then that doesn't explain when i try and play fall power it all cuts out,what do you think?

PT880 Neo 4 red led, Need your help please!!

Hello all
It is my first post and I need your help. Today I purchased a combo P4 3/800 E Box CPU, MSI PT880 Neo FSR Mboard and DDR 512MB 3200 VS Corsair 400Mhz 184 Pin Dimm from Fry's Electronic. I can not get my system to boot , no beep but only 4 red led and nothing on the screen. I used on my system Enermax 300W with DVD burner, DVD player, 60G HD, SBlive 5.1, ALL in Wonder Radeon 32Mb..After I am following all recommendation in the defferents Topic, I have no luck it won't boot. The 4 red leds are still on. Help me please thank you
Brono85

I've just got my Noisetaker 470watts too, it has the same rails as CoolerGiant , but I like CoolerGiant's active cooling system for both CPU and PSU , just that it's too lengthy and my chassis was small in size .
Back to the topic, likewise anr11 mentioned, you may need a BIOS flash and you can use Memtest86 to test your RAMs out .

4 Red Led Lights - Please help

the other day I left my computer on for a few hours and when I came home and moved the mouse it wouldn't come out of standby. To get it to shut off, I had to hold the power button down. Now when I start it, the fans start spinning, the DVD drive spins for a second and a few times the orange light on the monitor turned green. But after about 10 seconds, it shuts down.
I have the 4 red lights on the LED, so I swapped in a new PS - Enermax 550W with 36A on the 12v. Still same thing. So I'm guessing either the CPU or the board. I built this about 6 months ago. It's not overclocked and it was idle during the time I left it. Any suggestions?

Yes and no. I know that is confussing. However go to this first as you may have had a problem right along and did not know it nor would you without testing. Memtest86 is a great way to test memory. The no part is that it could be something else. But hey you have to start somewhere.
As for the timings in RAM you need to go to Corsairs page and check the exact model on their charts. Also be sure to read any side notes as they may have specific timings for your A64 versus other CPU's. It can be different as the memory controller is on the CPU in our case instead of on the MB.
Corsair also has tech support that can walk you through memory timings if you don't follow them at all.
You can also have some other thing in the system that went bad even as simple as a HDD cable that came loose. To troubleshoot sometimes the easiest way to find out is to unplug anything that is not needed to boot.
But start with the memory as the 4 Red LED's indicate.

Help!Cache status of object for Central Adapter Engine is incorrect

this problem cconfused me several days!
version:PI 7.1
after i activate the communication channel, the cache not update for central adapter engine
problem: in cache status overview, the update for central adapter engine not yet started, but notification is ok.
the update for integration server and mapping run time are all correct.
then when i display wsdl for sender agreement(SOAP sender), show message:Cache status of object abcd123 for Central Adapter Engine is incorrect
if i ignore this message, error message popup:dapter Engine af.xid.sapittest for communication channel abcd123 not registered in SLD
who can help me solve this problem.
thank you in advance.

Hi cheng,
Kindly check if you have set theparameter 'com.sap.aii.connect.integrationserver.sld.name' in your
Exchange Profile, since it's not set by default. Open note #1278563 and follow the procedures.
And you may check the following notes:
#1031321 - Self-Registration of Adapter Engine and RWB fails
#1334053 - No automatic PI 7.10 SLD Registration (Here you'll see the note 764176 which you have already applied and also the note #1117249).
In RWB, is the adapter Engine "red light"? If yes, what is the specific error?
Regards,
Caio Cagnani

Adapter engine in red color status

Dear All,
I got pi production system.When i verified componenet in RWB everything is fine except adapter engine.
Adapter Engine in red color status.Error in Are registrations of connections and protocol handler without errors?
I clicked on details.Please see below
13 of 23 connection(s) registered successfully(it was showing 5 of 23 success after i restarted it's showing 13 of 23)
8 of 8 protocol handler registered successfully
Connection registration failed for connection BC_http://sap.com/xi/XI/System on node 106310950 due to: Failed to register connection BC_http://sap.com/xi/XI/System. Reason: com.sap.engine.interfaces.messaging.api.exception.MessagingException: Failed to load messages into Queue BC_http://sap.com/xi/XI/SystemRecv from database. Reason: com.sap.engine.services.dbpool.exceptions.BaseSQLException: ResourceException occurred in method ConnectionFactoryImpl.getConnection(): javax.resource.ResourceException: (Failed in component: dbpool, BC-JAS-TRH) Cannot create connection.
Possible reasons:
1)Maximum allowed connections to DB or EIS is reached. You can apply CSN Note 719778 in order to check and resolve connection leaks.
2) Configuration to DB/EIS is wrong or DB/EIS is temporary unreachable
3) Connections are not enough for current load.
I tried many ways to resolve this problem unfirtunately i couldn't.Whether this gives any issues i mean shall i ignore this if not please suggest me to resolve this.
Thanks in advance
Regards
Kumar

Dear Team,
I am facing the same issue in SLD(PI Java Stack).
Please find below snapshot. Please Help. Many Thanks .....

Adapter Engine Red

Hi All,
In Run Time Work Bench, under Component Monitoring, I find that the Adapter Engine is Red in color.
Red LED; Component Status contains an error-Adapter Engine X01
What could be the reason for this error??
Regards
Kartik

check the communication channel monitoring...if any adapter is in error then it status is always red...
even if in the next attempt if interface testing is successful the adapte status will remain RED...
other alternative...inactive the adatper, activate the chage..again activate and chage it..I think then it will show green status..if every thing goes ok with that adapter:)
Thanks
Farooq.

Business Process Engine is showing Red Led in RWB

Hello to All, I installed PI7.1 and after client copy - Business Process Engine is showing Red Led in RWB.
When I click on BPE, the message at bottom of screen (in Yellow Status) indicates " Schedule background job for clearing report". Please let me know if any one has the solution with details.
I gone thru the link in SDN, but no resolution yet.
Re: Business Process Engine is showing Red Led in RWB
thanks, Srini

Hi Mark, All the nodes are green under "Maintain Runtime Environment" and "Maintain Definition Environment".
In RWB, component monitoring --> Display -- Business process engine is RED with message as
"Schedule background job for clearing report" in Yellow.
I looked under batch jobs "SWWCLEAR" and it is already ran successfully.
Please let me know how can i make BPE green.
thanks, Srini
Edited by: Srinivas Chatrati on Apr 20, 2009 11:51 PM

One of 4 led's is red!!! HELP ME

One of 4 led's is red!!! HELP ME
I have MSI KT4AV ane one one 4 leds is red!!! If somebody now what is mins, please help me. Thank

If you follow one of Wonkanobies's links you get a description on how to find the specifications of your Power Supply Unit, the PSU.
If I would do it in words, I'd say:
- turn computer off and unplug the main power cable leading from the wall to... The PSU.
- open the computer case and see if you can read a note on the PSU box.
- What does it say about amperes for the different voltages? See cdm's post or Wonkanobizz' for example.
- Don't be alarmed, cause you don't have to do more than write them down.
- You don't have to close the case directly afterwards, if you don't have childen or pets, but put back the power cable to the PSU.
- Tell us, and it will be possible to check that the PSU gives enough power to your system.

When i get an SMS txt my led light doesnt turn red no more need help!

when i get an SMS txt my led light doesnt turn red no more need help!

1. Product name:
BT Home Hub
2. Serial number:
+068343+NQ34940784
3. Firmware version:
Software version 4.7.5.1.83.8.204 (Type A) Last updated 22/01/15
4. Board version:
BT Hub 5A
5. DSL uptime:
0 days, 00:58:41
6. Data rate:
9995 / 39993
7. Maximum data rate:
11929 / 48683
8. Noise margin:
6.6 / 9.5
9. Line attenuation:
25.6 / 20.4
10. Signal attenuation:
25.4 / 20.0
11. Data sent/received:
8.6 MB / 61.5 MB
12. Broadband username:
[email protected]
13. BT Wi-fi:
Yes

Help! Curve 8300 not responding at all....flashing red LED.

Help!
My friend was trying to install a theme on my blackberry curve 8300 with her laptop and her blackberry manager. She was trying to sync when a message popped up saying it was deleting applications so she hit cancel and disconnected.
Since she disconnected the USB i have a black screen and flashing red LED. No response when I hit the power button. No response from taking the battery out, waiting, putting the battery back in. No response with ALT-SHIFT-DELETE.
Any help would be VERY much appreciated.

Error 507 simply means the device has no operating system on it.
Basically, you need to load an OS to the BB....
http://www.blackberryforums.com/general-8300-series-discussion-curve/170510-latest-os-8300-4-5-0-174...
1. If any post helps you please click the below the post(s) that helped you.
2. Please resolve your thread by marking the post "Solution?" which solved it for you!
3. Install free BlackBerry Protect today for backups of contacts and data.
4. Guide to Unlocking your BlackBerry & Unlock Codes
Join our BBM Channels (Beta)
BlackBerry Support Forums Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

Adapter Engine self-test status red / Error

Hi.
Im having trouble figuring out what to do about this error.
In Runtime Workbench --> Component Monitoring --> Integration Server --> Adapter Engine, the Adapter Engine self-test (and ping status) are in error.
The error message is: HTTP Request failed. Error code: "403". Error Message: "Forbidden [http://<server>:<port>/AdapterFramework/rtc]".
Anyone have an idea?
Regards...
Peter

Hi again.
Looking in the default trace I get this Info:
Hope it contribute to a solution.
Regards...
Peter
ACCESS.ERROR:
Authorization check for caller assignment to J2EE security role [sap.com/com.sap.aii.af.app*AdapterFramework : xi_af_rtc].
Exception when reading settings:
Thrown:
MESSAGE ID: com.sap.aii.rwb.exceptions.rb_CommunicationException.HttpReqFailed
com.sap.aii.rwb.exceptions.RequestFailedException: HTTP request failed. Error code: "403". Error message: "Forbidden [http://<server>:<port>/AdapterFramework/rtc]"
at com.sap.aii.rwb.exceptions.RequestFailedException.forHttpErrorCode(RequestFailedException.java:79)
at com.sap.aii.rwb.rtcheck.rtcclient.GrmgConnector.request(GrmgConnector.java:238)
at com.sap.aii.rwb.rtcheck.rtcclient.GrmgConnector.getSettings(GrmgConnector.java:105)
at com.sap.aii.rwb.core.XIRTCComponent.refreshConfigParameters(XIRTCComponent.java:279)
at com.sap.aii.rwb.web.componentmonitoring.model.CmMainModel.getConfigParameterCategoriesForSelectedXIComponent(CmMainModel.java:424)
at jsp_component_monitoring1209546798419._jspService(jsp_component_monitoring1209546798419.java:579)
at com.sap.engine.services.servlets_jsp.server.jsp.JspBase.service(JspBase.java:112)
at com.sap.engine.services.servlets_jsp.server.servlet.JSPServlet.service(JSPServlet.java:566)
at com.sap.engine.services.servlets_jsp.server.servlet.JSPServlet.service(JSPServlet.java:190)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
at com.sap.engine.services.servlets_jsp.server.runtime.RequestDispatcherImpl.doWork(RequestDispatcherImpl.java:321)
at com.sap.engine.services.servlets_jsp.server.runtime.RequestDispatcherImpl.forward(RequestDispatcherImpl.java:377)
at com.sapportals.htmlb.page.PageProcessorServlet.handleRequest(PageProcessorServlet.java:68)
at com.sapportals.htmlb.page.PageProcessorServlet.doPost(PageProcessorServlet.java:22)
at com.sap.aii.rwb.web.componentmonitoring.viewcontroller.CmPageProcessor.doPost(CmPageProcessor.java:35)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:760)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
at com.sap.engine.services.servlets_jsp.server.runtime.RequestDispatcherImpl.doWork(RequestDispatcherImpl.java:321)
at com.sap.engine.services.servlets_jsp.server.runtime.RequestDispatcherImpl.forward(RequestDispatcherImpl.java:377)
at jsp_FC_Secure1209546795341._jspService(jsp_FC_Secure1209546795341.java:15)
at com.sap.engine.services.servlets_jsp.server.jsp.JspBase.service(JspBase.java:112)
at com.sap.engine.services.servlets_jsp.server.servlet.JSPServlet.service(JSPServlet.java:566)
at com.sap.engine.services.servlets_jsp.server.servlet.JSPServlet.service(JSPServlet.java:190)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.runServlet(HttpHandlerImpl.java:401)
at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.handleRequest(HttpHandlerImpl.java:266)
at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:386)
at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:364)
at com.sap.engine.services.httpserver.server.RequestAnalizer.invokeWebContainer(RequestAnalizer.java:1039)
at com.sap.engine.services.httpserver.server.RequestAnalizer.handle(RequestAnalizer.java:265)
at com.sap.engine.services.httpserver.server.Client.handle(Client.java:95)
at com.sap.engine.services.httpserver.server.Processor.request(Processor.java:175)
at com.sap.engine.core.service630.context.cluster.session.ApplicationSessionMessageListener.process(ApplicationSessionMessageListener.java:33)
at com.sap.engine.core.cluster.impl6.session.MessageRunner.run(MessageRunner.java:41)
at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37)
at java.security.AccessController.doPrivileged(Native Method)
at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:102)
at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:172)
User XIRWBUSER, IP address
HTTP request processing failed. HTTP error [403] will be returned. The error is [You are not authorized to view the requested resource.No details available].

What does Adapter engine pick from system landscape directory? Kindly help!

Hi experts,
What does Adapter engine pickup from system landscape directory? In other words, what data adapter engine need from SLD?
Kindly give examples.
Thanks
Gopal

Hi,
To add, Integration server picks the URL of the various Adapter Engines form SLD and caches it in AE Cache(You can view the Cached URL in SXI_Cache).
In SLD u can go to Content Maintanence and check the Adapter FrameWork Instance and get the URL for the AE's for Secure and non-secure communication.
Regards,
Sudharshan

K8N Neo2 4 Red LEDs system boots fine except...Please Help

Just installed a K8N with new AMD Athlon 64 3000+ with factory heatsink and fan. Everything boots up fine except that I have 4 Red LEDs. I am using a 450W power supply...its a powerlab brand (didnt cost very much) but has high voltages, windows seems to be running fine. Programs run and install etc. So according to the LED guide the cpu is installed incorrectly...if that was true wouldn't it not run correctly. If I need to reinstall heatsink how do I go about that since there was a thermal coating on the heatsink already.
Additonally:
1. whenever I do an audio test the right channel plays out the left speaker and vice versa.
2. When I try to boot with a second HD it locks up during the splash screen. I messed around with jumpers and nothing seemed to work.
This is my first system build
Please Help

Let me answer the last, first. Yes you can get different RAM that will perform differently. However not all more Expensive RAM will be faster or more stable. I know some of that does not make the sense you would think but remember that the A64 likes cheapy RAM in a lot of cases better than Uber RAM.
OK back to timings. If you test Bandwidth with say SiSoft Sandra you will see that changing from 3,3,8 top say 4,4,8 will hardly affect the performance. Manybe more so it would affect you if you had the system cranked to max overclock. However even then if would not be anything you will notice say running a game or even in other benchmarks. We went through the same issues with the Via boards and I think you will be suprised with the results. In my case going from 4,3,8 to 4,4,8 dropped my Sandra results from 3031 to 3029. You can even determine that amount of difference and in fact that is within the margin of error for the test.
OK so I still say try it and see if the system runs better. Oh and back to the other question for a moment. When we compaired my cheapie RAM in the Via section to some nice Uber Expensive RAM we saw almost identical results ranginging from 3020-3050 at stock speeds. So unless you are planning to really overclock heavy you likely won't see any difference between $80 per 512MB stick and $150 512MB sticks.
Some food for thought. We tested, you decide.

BPE in RWB is showing Red LED.

Hello Experts,
In RWB --> Component Monitoring --> Display -- Business process engine is showing RED LED.The message
"Schedule background job for clearing report" is in Yellow.
In transaction swf_xi_customizing all the nodes are green under "Maintain Runtime Environment" and "Maintain Definition Environment".
I cannot change the "Schedule background job for clearing report". It gives message "Customizing Already Carried Out"
Please help.
Thanks in advance,
Regards,
Suraj

Hi Suraj,
Is this hindering the execution of your BPM. I dont think it should create any problems. I have often seen the adapter engine and integration engine showing Red LED but that does not hinder the execution of messages.
Regards,
Sarvesh

Red LED: Adapter Engine ? Help

Similar Messages

Maybe you are looking for