Red LED is on all the time

I got the problem with new phone z30.
i just had it for a week and when i turn on the phone from the first time.
there a red led on and it kept on all the time never stop.it hot really hot when i make or receive a phone call.
it burning my ear. i try all the way from reset, to turn of all the notifications off but it still on..
Can some one help ....

Reboot: On the side edge volume keys, press and hold down both of the Up and Down volume keys for about 20 seconds, ignoring the initial screenshot message... the screen will go black and reboot.
Now, if the red LED continues ON, check your Settings > App Manager and determine which of your apps is using the CPU the most, or draining the battery.
1. If any post helps you please click the below the post(s) that helped you.
2. Please resolve your thread by marking the post "Solution?" which solved it for you!
3. Install free BlackBerry Protect today for backups of contacts and data.
4. Guide to Unlocking your BlackBerry & Unlock Codes
Join our BBM Channels (Beta)
BlackBerry Support Forums Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

Similar Messages

The led is on all the time

hello again!
the led is on all the time on my precious playbook 64GB! - green, yellow or red depending on the battery status.
any suggestion for closing the led? - aside from sticking the bubble gum, coloring it with some permanent marker or definitely physical removing it?!
it is verry annoying, especially in dark ambient light.
thank you!

you might have a battery connector issue, you can pop off the back and remove the battery connection and put it back in. It does require a screw driver and you cant slip when doing this or a short can happen.
if that dont cure it then let it power down to 5 % and then reboot it while charging and then once at 77% reboot it again and drain it and then charge it again.
Click here to Backup the data on your BlackBerry Device! It's important, and FREE!
Click "Accept as Solution" if your problem is solved. To give thanks, click thumbs up
Click to search the Knowledge Base at BTSC and click to Read The Fabulous Manuals
BESAdmin's, please make a signature with your BES environment info.
SIM Free BlackBerry Unlocking FAQ
Follow me on Twitter @knottyrope
Want to thank me? Buy my KnottyRope App here
BES 12 and BES 5.0.4 with Exchange 2010 and SQL 2012 Hyper V

How Can I do that the leds of my UIR is blinkin all the time

Hello
I have a question of CVI, I am modify a UIR and I am add a LEDs in my UIR, I nedded do that these Leds is blinking all the time, but I am having problem for do this.
I know that exist 2 functions in CVI SetCtrlVal and GetCtrlVal for Set and Get the state of the Led, but in my code I am try of use these functions for the Led and this Is not blinking. Only change of color one time not more.
Do you know what is the form or the method for does this ??

You've posted this to the wrong forum. This is the LabVIEW forum. LabVIEW is the graphical programming language, not the C-based programming language. You need to post this in the LabWindows/CVI forum.

BB Curve 8900 died and will not turn on with the red lights on all the time

Hey all
The Blackberry Curve 8900 I have battery completely drained yesterday afternoon and I could not connect it to a charger until I get back home last night. I plugged the phone in around 11:00 , and even now 8 in the morning still wont be able to switch it on and the red light is on all the time.
Its a brand new one, I dont know what should I do to make it working.
Thanks for all your help!!

Hi and Welcome to the Forums!
Typically, these batteries do not like to be fully drained...while rare, it has been known to render the battery useless. But, before you jump to that, there are a few diagnostic steps you can take.
Get a known good and fully charged battery -- put in in your BB. See if it works. See if you can charge.
Get a known good other charger, attach it to your BB, see if it charges.
Try a different power outlet.
Give your battery to someone with the same model BB that they know charges fine. See if they can charge it.
The results of these steps will guide you to the root cause...which could be your battery, your BB, your charger, or the wall outlet you were using.
Good luck!
Occam's Razor nearly always applies when troubleshooting technology issues!
If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
Join our BBM Channels
BSCF General Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

LED on all the time

The green LED light in front of the Webcam Live. It's on all the time. I thought it supposed to be on only when the webcam is doing capture?
If the LED is on all the time, how can I tell if the webcam is capturing or not?

The led just indicates that it's connected to USB and activated by the webcam-drivers.
To capture you need software. there you can see if the cam captures or not.
At least it's that way with the led of my WebcamGo.
Greetz

SPA3102 all the time in flashing mode

Hi, SPA3102 doesn't receive IP from DHCP and still flashing signal LED. I can access it via http and rebooted it several times via phone and 2 times flashed the newest firmware but all this for nothing - LED is blinking all the time.
Please help me.

I think it is bootloader going on and something in soft is bad. How can I do my gate in state SOS ?

[WTA] MSI P55-GD65 6 phase on all the time? Where's APS?

Hello, First Post here..
I bought a MSI P55-GD65 lately and it runs spectacular and overclocks nicely. the newer BIOS 1.6 is noticably more stable when High VDroop is used than the BIOS 1.5, resulting in more power-efficient system of my own despite overclocking .
But nonetheless, i have some issues i would like to be answered:
1. When I use BIOS 1.5, the core voltage would be dropped to 0.896 (CPU-Z) when i set the core voltage as auto and all the power saving features enabled (C1E & EIST Enabled, C6 state selected, Turbo Mode off). but when i flash into BIOS 1.6, the same setting does not result in decreased voltage, the core clock still slows down though like it used to be. Maybe the next revision of BIOS will fix it?
2. I searched this forum about APS on P55-GD65, i have found that somebody here had testified that the BIOS 1.6 fixes the all-phase-working problem, as i was having the same problem too. Then i decided to flash to 1.6 too (which work flawlessly with your USB Flasher by the way, kudos ). But the problem still persists. APS only works when i apply through Control Center. i wonder about APS statement of "will work regardless of operating system" is a true and automated one. And yeah, i have tried to clear CMOS and run it on nominal mode and still no changes from BIOS 1.5. The 6 phase LED is lit all the time unless i "apply" in Control Center.
My Current system are:
MSI P55-GD65 (Lotes ILM)
I5 750
HD 5770
Silverstone Zeus 750Watt
WDC Black 500GB
Windows 7 Ultimate
Thanks for your attention.

Quote from: chrisjb on 19-January-10, 17:13:56
you have to run the cpu at default settings so (133mhz X multiplier) the slight overclock of the cpu will disable power saving so all the phase leds will constantly be lit up.
Have the multiplier running at 160 because of XPM 1600 memory blocks, and the board runs with 2/3 phases in normal mode.
Are using BIOS 1.3 because of XPM problems with other versions.

5 Phase - ALL LIT ALL THE TIME

Hello everyone again!!
OK... quick question... read in the manual about the 5 phase led indicators on the board... but there was no reference to what the power levels actually mean... mine is showing all 5 blue led's lit all the time.... is this a bug??? Should it drop to less lights when at idle?
Any information is greatly appreciated...

With the x58 pro, all 5 LEDs will be lit all the time unless you use the Greenpower utility with BIOS version 7.0. If you update BIOS to 7.1, there is a Greenpower setting in the BIOS in which you can enable, and then when CPU is idle, only 1 or 2 LEDs will be lit. When working all 4 or 5 will be lit. The less LEDs lit, the less work your CPU is doing, and the less energy it is using. Hope this helps.

I sometimes have blue and red square-shaped dots appear on my MBP; especially but not exclusively when I'm watching videos. The dots don't stay in the same place; and also they are not there all the time.

I sometimes have blue and red square-shaped dots appear on my MBP; especially but not exclusively when I'm watching videos. The dots don't stay in the same place; and also they are not there all the time. Also, sometimes my animations (applications opening, windows being dragged, etc.) will glitch as well. Again, this is not a continual thing; it just happens variously throughout my day. MBP Model A1212, OS X 10.6.8, 2.33 Ghz 3GB RAM.

Did the original songs that do not appear on the car player play in the Music app on the iPod? Sometimes glitches happen and they do not. Also, If y ohave a 5G iPod/iOS 7, purchase songs will show with an cloud icon by them if they are not downloaded if Shall All is turned on in Settings>iTunes and App Store

Hello evryone, my led of my phone is burning all the time..

hello evryone,
my Led of my phone is burning all the time, verry anoying!
what to do?
greetz,
mijn Led van mijn Iphone blijft de hele tijd branden...
wat moet ik doen?
garantie? en ben een enorme digibeet.. dus kan iemand een link neerzetten hoe ik hem moet opsturen ofzo?
vriendelijk groeten,

Basic troubleshooting from the User's Guide is reset, restart, restore (first from backup then as new). Try each of these in order until the issue is resolved.

The wireless led on my Aspire 5535 is ON all the time

The wireless led on my Aspire5535 is ON all the time, it will not turn off when the wireless button is pushed, instead I get a message on the screen " No Wireless Device" even though there is a card physically installed. Push the bluetooth button and the the message is "No Bluetooth Device ". I have changed the Atheros card and installed newest drivers also have replaced the "Launch card ". I still get the same problem. The machine works ok with a dongle but I would like to use the USB slot. Should I buy a different wireless card instead of the "G" band go for a "N" band? As there is no Bios update I cannot do anything with the Bios, (thinking it may be corrupt). Should I purchase a Bios chip?or has anyone any Ideas as to how to solve my problem. Regards to allBarry D

Hi
You have a couple of options as I see it please try these steps might help you to fix your issue.
1) Disconnect the Battery & Adapter then press & hold the power button on Notebook for 30 seconds then turn on the unit and check if the Wireless light turns on.
2) Go to Device manager then uninstall the wireless drivers from Network Adapter and restart the unit and check if the light turns on.
3) Please update the Bios & Wireless driver from HP website.
4) Click start in search type Recovery Manager then click on it select Yes on User access control then select I need immediate help then select Driver & application recovery select the wireless driver and install it then restart the unit.
5) If you are comfortable reseating the wireless card which will be on the back panel off your unit you could try this steps as well.
If still you have the same issue then you need to call HP Technical support and get the part replaced.
Let us know how it goes!
"I work for HP."
****Click the (purple thumbs up icon in the lower right corner of a post) to say thanks****
****Please mark Accept As Solution if it solves your problem****
Regards
Manjunath

Problem in Cisco 1410 Bridge - Install LED in solid amber all the time

Hi, have anyone encountered during power up of Cisco Aironet 1410 (with integrated antenna), the Install LED status is solid amber all the time?
At Bridge LEDs
Install LED - solid amber
3 LEDS - none
At power injector
Uplink - Off
Injector - Blinking Green
Ethernet - Off

Two things.
1. Did you assign the role of that bridge? Root, non-root, etc.,
2. Check for "install" mode on the GUI itself and that may lead to finding the problem.

My Led flash light switch on all the time,anybody got the solution.i tried 3 things but it couldn't solved the problem. 1.settings-accessibility-LEd flash off   2. Switch off the phone for several times. 3.press the home button n power button until the

My Led flash light switch on all the time,anybody got the solution.i tried 4 things but it couldn't solved the problem. 1.settings-accessibility-LEd flash off   2. Switch off the phone for several times. 3.press the home button n power button until the apple logo appears. 4.reset my all settings.

My Led flash light switch on all the time,anybody got the solution.i tried 4 things but it couldn't solved the problem. 1.settings-accessibility-LEd flash off   2. Switch off the phone for several times. 3.press the home button n power button until the apple logo appears. 4.reset my all settings.

I have a Time Capsule on which I back up 2 MacBooks and on my wife's machine she keeps having Airport Utility popping up all the time with a yellow button flashing on the left and a Red button on the right side with a "1" in the middle of it.

I have a Time Capsule on which I back up 2 MacBooks and on my wife's machine she keeps having Airport Utility popping up all the time with a yellow button flashing on the left and a Red button on the right side with a "1" in the middle of it. Can any one tell me what is wrong. I read where when the yellow light was flashing there was a problem, but I am a novice at this and have no idea where to turn. It seems to be backing up on a regular basis.

On the Mac......
Open up Macintosh HD > Applicatons > Utilities > AirPort Utility
Click on the Time Capsule icon, then click Edit in the small window that appears
Click the Network tab at the top of the next window
Change the setting for Router Mode from the current DHCP and NAT to read Off (Bridge Mode), then click Update at the lower right of the window, and wait a full minute for the Time Capsule to restart to a green light.
Then.....very important
Power off the Time Capsule and your Arris modem/router for a few minutes
Start up the Arris first, and let it run a few minutes by itself
Start up the Time Capsule next the same way
Your network will now be correct, and your printing capabilities will improve.
If Time Machine backups do not occur now, post back and we will tackle that next.

Red "sos" all the time!

Im getting a red sos where the signal indicator should be all the time! even in places where i used to have full service! is my phone broken??
Solved!
Go to Solution.

Sorry to hear about the frustration! If you have a red X like you're having then you may have a problem with one of five things (generally): 1) SIM card is dying; 2) System software on phone is messed up; 3) There is something physically wrong with the phone; 4) Your service provider is having a problem with their service (towers, base stations, certain SIM cards are having problems); or 5) Your service provider is not having a general problem but a specific problem that applies to your account only. Before contacting your service provider, you can additionally try pulling the SIM card and ensuring that the contacts are clean. If that's OK, then try your SIM card in another phone...is the signal OK in another phone? Finally, if you are comfortable with it...reinstall the system software for your phone. You should be able to go to your service provider's web site and get the handheld software for your phone. Even if you have the latest software, you can still reinstall it to fix any system glitches. If those steps don't help, it's either the phone or your service provider.
Hope that helps!
"Once you label me you negate me." Soren Kierkegaard
Tim J
Colorado Springs, CO

Red LED is on all the time

Similar Messages

Maybe you are looking for