Red light after connecting usb cable each time

My ipod shuffle (4th gen) is weird and would not start. I know it's because someday I plugged out the usb cable right after I perform the sync task and forget to press the reject button first.
Now the symtons is: It won't start / recharge, and it even doesn't show any light. Each time I connect it to the PC or AC adaptor, it will show RED light in about 5 seconds, and after few seconds there will be no light and it just dies.
How can I fixed my poor faily new shuffle?

Hey exkaede,
Welcome to Apple Support Communities! I'd go ahead and try restoring your iPod shuffle to factory settings, so the software will be restored to its original factory condition with updates:
Restoring iPod shuffle to factory settings
http://support.apple.com/kb/HT1481
If your computer doesn't recognize the iPod and it isn't appearing in iTunes, take a look at this document:
iPod shuffle not appearing in iTunes
http://www.apple.com/support/ipodshuffle/assistant/itunes/#section_0
Best,
David

Similar Messages

  • Kernel Panic when I connect USB cable to use Rane Serato SL3

    Connect USB cable to use Rane Serato SL3 causes the following kernel panic. Used cable is an 5 meter USB-2 cable. This is 100% reproducable.
    Yes yes I know Rane does not officially support Mavericks yet however if I use another (shorter) USB-2 cable with the Rane Serato SL3 it's no problem. I also have an older Rane Serato SL1 and this device works (USB-1) perfect with the same 5 meter USB-2 cable and the same short USB-2 cable.
    I've taken the liberty to ask Rane what's going on and no succes there. They just don't seem to know.
    So you smart people over here, what's going on?  
    Here is the Kernel Panic:    
    Anonymous UUID:       944C81E9-22DD-96FF-FD1A-553E9CAD6B34
    Sat Nov  2 20:34:06 2013
    panic(cpu 4 caller 0xffffff800b8dc19e): Kernel trap at 0xffffff7f8debe166, type 14=page fault, registers:
    CR0: 0x000000008001003b, CR2: 0x0000000000000000, CR3: 0x000000000e538000, CR4: 0x00000000000606e0
    RAX: 0x00000000e0000200, RBX: 0xffffff8025405000, RCX: 0xffffff800bf024b0, RDX: 0xffffff802d0add08
    RSP: 0xffffff80fcbc3d80, RBP: 0xffffff80fcbc3da0, RSI: 0x00000000000a0014, RDI: 0x0000000000000000
    R8:  0x0000000000000051, R9:  0xffffff800be01910, R10: 0x00000000000003ff, R11: 0xffffffffffffffff
    R12: 0xffffff801ecc1800, R13: 0xffffff802d0add00, R14: 0xffffff8025405000, R15: 0xffffff7f8debe200
    RFL: 0x0000000000010246, RIP: 0xffffff7f8debe166, CS:  0x0000000000000008, SS:  0x0000000000000000
    Fault CR2: 0x0000000000000000, Error code: 0x0000000000000000, Fault CPU: 0x4
    Backtrace (CPU 4), Frame : Return Address
    0xffffff80fcbc3a10 : 0xffffff800b822f69
    0xffffff80fcbc3a90 : 0xffffff800b8dc19e
    0xffffff80fcbc3c60 : 0xffffff800b8f3606
    0xffffff80fcbc3c80 : 0xffffff7f8debe166
    0xffffff80fcbc3da0 : 0xffffff7f8debee0f
    0xffffff80fcbc3dc0 : 0xffffff7f8c13aadc
    0xffffff80fcbc3df0 : 0xffffff7f8debe2a9
    0xffffff80fcbc3e00 : 0xffffff7f8c13aa20
    0xffffff80fcbc3e30 : 0xffffff7f8c139634
    0xffffff80fcbc3e60 : 0xffffff7f8debbaf4
    0xffffff80fcbc3ea0 : 0xffffff800bcae4b3
    0xffffff80fcbc3f00 : 0xffffff7f8debaa62
    0xffffff80fcbc3f20 : 0xffffff800b84a15a
    0xffffff80fcbc3fb0 : 0xffffff800b8d6aa7
          Kernel Extensions in backtrace:
             com.apple.iokit.IOAudioFamily(1.9.4f11)[5077FB4F-0903-3D79-8280-5B2341E93BF3]@0 xffffff7f8c135000->0xffffff7f8c163fff
                dependency: com.apple.kext.OSvKernDSPLib(1.14)[744516ED-C05D-340F-9867-F5E89B2E8BE5]@0xffff ff7f8c124000
             com.rane.driver.sl3.10.6(1.3.3f1)[46AEB5AC-AD52-3F5C-9927-59ABE444B435]@0xfffff f7f8deba000->0xffffff7f8dec5fff
                dependency: com.apple.iokit.IOAudioFamily(1.9.4fc11)[5077FB4F-0903-3D79-8280-5B2341E93BF3]@ 0xffffff7f8c135000
                dependency: com.apple.iokit.IOUSBFamily(650.4.4)[972D3024-AF9C-3E09-A9EC-D9AB2A559B38]@0xff ffff7f8c19a000
    BSD process name corresponding to current thread: kernel_task
    Mac OS version:
    13A603
    Kernel version:
    Darwin Kernel Version 13.0.0: Thu Sep 19 22:22:27 PDT 2013; root:xnu-2422.1.72~6/RELEASE_X86_64
    Kernel UUID: 1D9369E3-D0A5-31B6-8D16-BFFBBB390393
    Kernel slide:     0x000000000b600000
    Kernel text base: 0xffffff800b800000
    System model name: MacBookPro8,2 (Mac-94245A3940C91C80)
    System uptime in nanoseconds: 431507508429846
    last loaded kext at 426057833798866: com.sophos.kext.sav          8.0.14 (addr 0xffffff7f8dec6000, size 24576)
    last unloaded kext at 426034845418472: com.sophos.kext.sav          8.0.14 (addr 0xffffff7f8dec6000, size 20480)
    loaded kexts:
    com.sophos.kext.sav          8.0.14
    com.rane.driver.sl3.10.6          1.3.3f1
    com.regularrateandrhythm.driver.RowmoteIREmu          1.0
    com.eltima.ElmediaPlayer.kext          1.58
    com.Cycling74.driver.Soundflower          1.6.6
    com.serato.usb.kext          2.3.0
    net.osculator.driver.OSCulatorIOKit          2.1
    com.squirrels.airparrot.framebuffer          3
    com.squirrels.driver.AirParrotSpeakers          1.7
    at.obdev.nke.LittleSnitch          4050
    com.apple.driver.AppleHWSensor          1.9.5d0
    com.apple.iokit.IOBluetoothSerialManager          4.2.0f6
    com.apple.driver.AGPM          100.14.11
    com.apple.filesystems.autofs          3.0
    com.apple.driver.AppleMikeyHIDDriver          124
    com.apple.driver.AudioAUUC          1.60
    com.apple.iokit.IOUserEthernet          1.0.0d1
    com.apple.kext.AMDFramebuffer          1.1.4
    com.apple.driver.AppleHDA          2.5.2fc2
    com.apple.driver.AppleMikeyDriver          2.5.2fc2
    com.apple.Dont_Steal_Mac_OS_X          7.0.0
    com.apple.driver.AppleUpstreamUserClient          3.5.13
    com.apple.driver.AppleHWAccess          1
    com.apple.AMDRadeonX3000          1.1.4
    com.apple.iokit.BroadcomBluetoothHostControllerUSBTransport          4.2.0f6
    com.apple.driver.AppleMuxControl          3.4.12
    com.apple.driver.AppleIntelHD3000Graphics          8.1.8
    com.apple.driver.AppleIntelSNBGraphicsFB          8.1.8
    com.apple.driver.AppleSMCPDRC          1.0.0
    com.apple.driver.ACPI_SMC_PlatformPlugin          1.0.0
    com.apple.driver.SMCMotionSensor          3.0.4d1
    com.apple.driver.AppleSMCLMU          2.0.4d1
    com.apple.kext.AMD6000Controller          1.1.4
    com.apple.driver.AppleLPC          1.7.0
    com.apple.driver.AppleMCCSControl          1.1.12
    com.apple.driver.AppleThunderboltIP          1.0.10
    com.apple.driver.AppleUSBTCButtons          240.2
    com.apple.driver.AppleUSBTCKeyboard          240.2
    com.apple.driver.AppleIRController          325.7
    com.apple.AppleFSCompression.AppleFSCompressionTypeDataless          1.0.0d1
    com.apple.AppleFSCompression.AppleFSCompressionTypeZlib          1.0.0d1
    com.apple.BootCache          35
    com.apple.iokit.SCSITaskUserClient          3.6.0
    com.apple.driver.XsanFilter          404
    com.apple.iokit.IOAHCIBlockStorage          2.4.0
    com.apple.driver.AppleUSBHub          650.4.4
    com.apple.driver.AppleSDXC          1.4.0
    com.apple.iokit.AppleBCM5701Ethernet          3.6.9b9
    com.apple.driver.AppleFWOHCI          4.9.9
    com.apple.driver.AirPort.Brcm4331          700.20.22
    com.apple.driver.AppleAHCIPort          2.9.5
    com.apple.driver.AppleUSBEHCI          650.4.1
    com.apple.driver.AppleSmartBatteryManager          161.0.0
    com.apple.driver.AppleRTC          2.0
    com.apple.driver.AppleACPIButtons          2.0
    com.apple.driver.AppleHPET          1.8
    com.apple.driver.AppleSMBIOS          2.0
    com.apple.driver.AppleACPIEC          2.0
    com.apple.driver.AppleAPIC          1.7
    com.apple.driver.AppleIntelCPUPowerManagementClient          216.0.0
    com.apple.nke.applicationfirewall          153
    com.apple.security.quarantine          3
    com.apple.driver.AppleIntelCPUPowerManagement          216.0.0
    com.apple.iokit.IOSerialFamily          10.0.7
    com.apple.kext.triggers          1.0
    com.apple.iokit.IOSurface          91
    com.apple.iokit.IOBluetoothFamily          4.2.0f6
    com.apple.driver.DspFuncLib          2.5.2fc2
    com.apple.vecLib.kext          1.0.0
    com.apple.iokit.IOAcceleratorFamily          98.7.1
    com.apple.driver.AppleSMBusPCI          1.0.12d1
    com.apple.iokit.IOBluetoothHostControllerUSBTransport          4.2.0f6
    com.apple.driver.AppleGraphicsControl          3.4.12
    com.apple.iokit.IOAudioFamily          1.9.4fc11
    com.apple.kext.OSvKernDSPLib          1.14
    com.apple.driver.IOPlatformPluginLegacy          1.0.0
    com.apple.driver.AppleHDAController          2.5.2fc2
    com.apple.iokit.IOHDAFamily          2.5.2fc2
    com.apple.driver.AppleSMC          3.1.6d1
    com.apple.kext.AMDSupport          1.1.4
    com.apple.AppleGraphicsDeviceControl          3.4.12
    com.apple.driver.IOPlatformPluginFamily          5.5.1d27
    com.apple.iokit.IOFireWireIP          2.2.5
    com.apple.driver.AppleBacklightExpert          1.0.4
    com.apple.iokit.IONDRVSupport          2.3.6
    com.apple.driver.AppleSMBusController          1.0.11d1
    com.apple.iokit.IOGraphicsFamily          2.3.6
    com.apple.driver.AppleThunderboltDPInAdapter          2.5.0
    com.apple.driver.AppleThunderboltDPAdapterFamily          2.5.0
    com.apple.driver.AppleThunderboltPCIDownAdapter          1.4.0
    com.apple.driver.AppleUSBMultitouch          240.6
    com.apple.iokit.IOUSBHIDDriver          650.4.4
    com.apple.driver.AppleUSBMergeNub          650.4.0
    com.apple.driver.AppleUSBComposite          650.4.0
    com.apple.iokit.IOSCSIMultimediaCommandsDevice          3.6.0
    com.apple.iokit.IOBDStorageFamily          1.7
    com.apple.iokit.IODVDStorageFamily          1.7.1
    com.apple.iokit.IOCDStorageFamily          1.7.1
    com.apple.iokit.IOAHCISerialATAPI          2.6.0
    com.apple.iokit.IOSCSIArchitectureModelFamily          3.6.0
    com.apple.driver.AppleThunderboltNHI          1.9.2
    com.apple.iokit.IOThunderboltFamily          2.8.5
    com.apple.iokit.IOUSBUserClient          650.4.4
    com.apple.iokit.IOEthernetAVBController          1.0.3b3
    com.apple.driver.mDNSOffloadUserClient          1.0.1b4
    com.apple.iokit.IOFireWireFamily          4.5.5
    com.apple.iokit.IO80211Family          600.34
    com.apple.iokit.IONetworkingFamily          3.2
    com.apple.iokit.IOAHCIFamily          2.6.0
    com.apple.iokit.IOUSBFamily          650.4.4
    com.apple.driver.AppleEFINVRAM          2.0
    com.apple.iokit.IOHIDFamily          2.0.0
    com.apple.driver.AppleEFIRuntime          2.0
    com.apple.iokit.IOSMBusFamily          1.1
    com.apple.security.sandbox          278.10
    com.apple.kext.AppleMatch          1.0.0d1
    com.apple.security.TMSafetyNet          7
    com.apple.driver.AppleKeyStore          2
    com.apple.driver.DiskImages          371.1
    com.apple.iokit.IOStorageFamily          1.9
    com.apple.iokit.IOReportFamily          21
    com.apple.driver.AppleFDEKeyStore          28.30
    com.apple.driver.AppleACPIPlatform          2.0
    com.apple.iokit.IOPCIFamily          2.8
    com.apple.iokit.IOACPIFamily          1.4
    com.apple.kec.corecrypto          1.0
    com.apple.kec.pthread          1

    Most likely, one of these is the culprit.
    com.sophos.kext.sav          8.0.14
    com.rane.driver.sl3.10.6          1.3.3f1
    com.regularrateandrhythm.driver.RowmoteIREmu          1.0
    com.eltima.ElmediaPlayer.kext          1.58
    com.Cycling74.driver.Soundflower          1.6.6
    com.serato.usb.kext          2.3.0
    net.osculator.driver.OSCulatorIOKit          2.1
    com.squirrels.airparrot.framebuffer          3
    com.squirrels.driver.AirParrotSpeakers          1.7
    at.obdev.nke.LittleSnitch          4050
    Boot into safe mode (restart holding down SHIFT key). If no KP, then disable these, reenable one at time to determine which. If KP, then most likely hardware related. Run the Apple Hardware Test suite, extended tests at least twice, followed by Rember.  See
    OS X About kernel panics,
    Technical Note TN2063: Understanding and Debugging Kernel Panics,
    Mac OS X Kernel Panic FAQ,
    Resolving Kernel Panics,
    How to troubleshoot a kernel panic, and
    Tutorial: Avoiding and eliminating Kernel panics for more details.

  • Nokia N8 - Connect USB cable to device

    My new nokia N8 is constantly coming up with the message "connect usb cable to device".
    I'll click ok and 2 minutes later it will reappear.
    When i connect it to a usb, it disappears but will then reappear when i unplug. I've tried updating software but none is available, and there is no programs running on the phone.
    When i turn off and on i still get the same problem.
    Anyone know of a solution before i throw it against the wall?

    vvaino wrote:
    Ok,
    Have you tried the trick  you can find from the phone's
    manual; long press the on/off button (for 8-10 sec) until the
    phone vibrates three times? With this, you don't lose any
    of your information.
    -vvaino
    That's barely a trick
    it just kills the power to the phone and is esentialy the same as using the on off switch
    anyway as to the OP don't know
    you could try resseting the device  type *#7370# into the dialer,
    this will restore the phone to an out of box stateand you will loose all of your settings
    see if that helps

  • TS1538 i cant connect my iphone to laptop. its nither charging nor connecting :( usb cable is okay .... can any one help ??

    i cant connect my iphone to laptop. its nither charging nor connecting usb cable is okay .... can any one help ?? pls...

    BOB we need you urgently
    Perhaps Bob will see this thread, he is the professor in these cases.
    You do not use a WEP password but wpa/wpa2 on router and equipment.
    All equipment connects to WiFi, but for your iPad.
    Even with all other equipment WiFi off, you cannot connect your iPad.
    Your iPad connects to other WiFi nets correctly.
    All resets etc done on iPad and Router.
    Still I am not sure it is your router for sure, frustrating...
    I want to test 2 other things:
    1. in your iPad, set everything OFF in Settings/Cellular, turn off/then/on your WiFi, and see whether it will still not connect...
    2. If that does not do it: disconnect the router as well as the modem from the power, for 15 seconds, then reconnect the modem, let it fully start, then reconnect the routet let it fully start, turn of your WiFi in iPad, then on, and see whether it will connect.

  • HT4623 since i updated my iphone 4 to ios 6, i ve noticed that the wifi connection turns off each time when the screen is locked. I need to be connected with wifi all the time so as to stay updated with all my emails.

    since i updated my iphone 4 to ios 6, i ve noticed that the wifi connection turns off each time when the screen is locked. I need to be connected with wifi all the time so as to stay updated with all my emails. is there anyway for this problem.
    (PS: i know we could use 3G but i want to use wifi instead)

    I am having a really wierd issue as well that is probally related. I dont see 95% of the album artwork associated with my music. Also, it seems as if this has gotten worse since I started using that match feature

  • After updating, as requested, each time I select iPhoto, the system is requesting that I download the iPhoto upgrade.  I have downloaded this several times.  However, I continue to receive this message.  Please help me resolve this issue.

    After updating, as requested, each time I select iPhoto, the system is requesting that I download the iPhoto upgrade.  I have downloaded this several times.  However, I continue to receive this message.  Please help me resolve this issue.

    Can you give us the exact error message you get?

  • I have an iphone 5c and I left the office to reach 0 percent and now when I put it in charge of a battery icon appears red and under a usb cable and will not turn... what can I do?

    I have an iphone 5c and I left the office to reach 0 percent and now when I put it in charge of a battery icon appears red and under a usb cable and will not turn ... what can I do ?

    Read this
    If you can't update or restore your iPhone, iPad, or iPod touch - Apple Support
    and ensure you plug it into a wall socket to recharge

  • Ipod shuffle 4th generation device not shown on itunes, not charging. Seeing red light when connecting to USB charger for a few seconds, then nothing. How to fix this?

    My ipod shuffle 4th generation was working fine for a few months. My son then bit the USB charger. I bought a new USB charger, but the shuffle is not charging and not showing up under the devices in itunes. It also doesn't appear in my windows under my computer. Just to note. I also have a new ipod touch. I am able to charge that fine on the same computer using the USB charger. The device (Ipod touch) does show up in windows and in itunes. The shuffle doesn't show in either place.
    I have tried to use the apple support page. I went through each step. I made all of my USB drives not shut down, I had my computer on all night to try and charge the shuffle. All I see is a red light that appears on the shuffle for a few seconds when I first connect the USB charger to the computer. Then, nothing. Since this was working a bit ago, I don't think that I have a defective shuffle. The USB charger is brand new, I just picked it up yesterday from the apple store. I have the short one, and the longer cable as well.
    Any help that you might be able to give to me would be much appreciated. My daughter is missing listening to her music. Thanks!

    Instead of "charger," you should call it the "USB cable" to avoid confusion.  When started reading your post, I was thinking, how can your son break a USB power adapter (the "charger" that plugs into a wall socket) by biting it...
    Since you got the product with the two USB cables at the Apple Store, you have the right replacement (some third-party replacements are for the 2nd gen shuffle and do not work with the 4th gen shuffle).  Make sure you are completely inserting the plug into the headphones jack.  The fit may be tighter than expected, since the connectors are new.
    http://support.apple.com/kb/TS3572
    If you tried both of those cables, it would be unlikely that you got two faulty cables in one package.  If a new USB device has been added to the computer between the time it worked with the old cable and now, there could be a problem on the USB bus (such as not enough power or a device conflict). 
    As a test, you should shut down (power off) the computer and disconnect all USB devices (including any hub), except for standard keyboard and mouse (if used).  Do this to reset the shuffle
    http://support.apple.com/kb/ht1655
    Start up computer, run iTunes, and connect the shuffle by itself to a direct USB port on the computer.

  • Problems after connecting USB 1.1 devices to an unpowered USB hub

    After connecting a mouse, usb stick and an external hardrive to an unpowered USB 2.0 hub, I now get no response from any of those devices, though they had been working fine before. Other devices that I have since plugged into that same usb slot work just fine. What could possibly have happened??? I appreciate any insight!

    Nance,
    Welcome to the Discussions.
    You did not mention if each one of these devices still works when plugged directly into the USB 1.1 port. If they do, then I cannot explain the problem. If they do not, it is possible the USB 1.1 port was overloaded with all three devices connected to the unpowered USB 2.0 hub. You may have gotten such a warning on the screen.
    If you have not done so, I would disconnect all devices, shut down the powerbook, then reset the PRAM.
    http://docs.info.apple.com/article.html?artnum=2238
    Now test each device by connecting directly to the USB 1.1 port.
    If both the USB stick and USB HD (I am assuming that you have an unpowered 2.5" HD) were mounted on the computer's desktop when this 'possible' power shortfall occurred, it could have corrupted both devices so they will not longer mount properly. Connect each device to the USB 1.1 port, then see if Disk Utility can see the device and repair any damage. The mouse may no longer work if the preferences or other software was corrupted.
    If you are running an unpowered HD, I would recommend a powered USB 2.0 hub so you can connect other devices without worry.

  • Connecting USB cable to new iPad

    Is there a way of connecting a USB cable to my new iPad? I have a device that I want to connect to it but it is only supplied with a USB cable.

    I don't find this question too clear, but I'll try to answer anyway.
    " ... my new iPad?"  I wonder if that means the latest model iPad, commonly called the iPad 4.  If so, it has a lightning port on the bottom.
    " ... but it is only supplied with a USB cable."  What does "it" refer to ... is it the device you're trying to connect to, or is it the iPad?
    Anyway, your iPad comes with a cable that goes from its bottom port (presumably the lightning port, but maybe a 30 pin port if you're really talking about an older model) to USB.
    So the bottom line is you have a cable with your iPad that connects to USB.  The cable came with your iPad.

  • Why do I have to install Connect Add-in each time I share desktop?

    Each time I want to share my desktop I am prompted to install the connect add-in.  It stays active while the browser is open, but when I close the browser and try again, I have to install it all over again.  Often the install hangs, and I have to cancel and install a dozen times to get it to install.  How do I install once and never again?
    Add-in version:9,0,177,0
    Player Version: WIN 10,0,22,87
    IE7

    Usually Muse only uploads files which have changed.
    A new version of Muse was released yesterday. If you're uploading your site for the first time with the new version, Muse will upload all files because some of the code generation has changed in the new version.
    The next time you upload with the same version of Muse, only the changed files should be uploaded.

  • Can't connect ethernet cable on Time capsule without messing Time Machine

    Hi All,
    I just bought a Time Capsule couple of weeks ago.
    I have a mac with time machine enabled on Wi-fi. I also have a vista that I can't get the wireless card to work properly... It keeps disconnecting and connecting from the internet.
    So I decided to plug an Ethernet cable between the vista and time capsule. Everything was working great, except that Time machine cannot connect to time capsule as long as that cable is there...
    Can't find anything to fix this...
    So either solution is fine by me: either some tips on why Vista keeps dropping the internet connection or why my time machine can't back up with an ethernet cable plugged on Time Capsule.
    thanks,
    marcelo.
    Message was edited by: caldas.family

    The warranty entitles you to complimentary phone support for the first 90 days of ownership.

  • HP workstation z400 gives 6 beeps & red light after chaging bios setting

    Maybe somebody here knows what to do:
    After I changed the setting of the PCIe-slots to "compute", the z400 no longer starts at all and won't give me a chance to change this setting back to the way it was.  I understand that the "compute" setting is reserved for special video cards like the Nvidia Tesla card and I also know by now that it is completely wrong for my needs. 
    When I now press the power button, I see the red light flasing along with the 6 beeps indicating a graphics error.  I already tried to reset the cmos by taking the battery out, pushing the cmos button...but no luck.
    The way I see it, the z400 no longer expects a regular graphics card in the PCIe slots and therefore signals that no card is installed (same error code without any graphics card installed). 
    So: does anyone know how I can change this back to normal?  There must be a way!
    I can't tell you how much I appreciate your help because I'm in the middle of a production and this workstation plays a crucial role.
    Thanks!
    Vinne
    PS I don't think it matters, but the OS is Windows 7, 12GB RAM

    Hi,
    Please try to clear it: 
    To clear CMOS, follow these steps:
    Temporarily set jumper CLRRTC1 to pins 1-2.
    Wait 5-10 seconds and then return the jumper to pins 2-3.
    When you startup the PC you will need to enter BIOS setup to reset any custom BIOS settings.
    Where are the jumpers, please refer to the following site:
       http://h20000.www2.hp.com/bizsupport/TechSupport/Home.jsp?lang=en&cc=us&prodTypeId=12454&prodSeriesI...
    Good luck.
    BH
    **Click the KUDOS thumb up on the left to say 'Thanks'**
    Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

  • Help connecting usb cable

    when i connect my usb cable nothing happens.. isn't itunes suppose to open up and on the left hand side of my itunes it should say ipod or somthing. i also tried just opening my itunes my self when i connected the usb cable but my ipod doesnt even appear in my itunes. can anyone help?

    Hi Illaass...I saw that but was putting the best construction on the statement that the lack of WiFi was due to a technical problem that might be resolved soon. Maybe I was reading too much into this and not thinking there was a really urgent need to connect. But, you are right, DB and email become problematic without WiFi...unless the OP could go to a Starbucks and email to the office

  • Need Help for connectivity USB Cable Nokia 5800 ca...

    Hi All,
    I really need help to solve my problems. I just bought nokia 5800 XM last week. I already installed the CD software in my windows XP, but it seems that PC cannot recognize the USB cables. I have plug in an unplugged... At firstime it detects my nokia 5800 XM, but when I open PC suite or OVI, it doesn't connect the USB cables into PC. I already install and uninstall The OVI suite but it is still the same, when I try it in OVI suite to detect my phones, it doesn't react.... I also have download from Nokia website to install manually Nokia USB cable driver for my  cable type CA-101... it seems nothing works here... tell me what should I do? I don't think that the USB cable I bought is fake, it has original guarantee..... please desperately need help! Anybody? 

    When you plug the phone into the computer, ON THE PHONE it should ask you which mode to connect in, and you should select "PC Suite" mode.  Does this happen?
    Ravi

Maybe you are looking for