Red light during video capture on N95

CAn I change the orange light lifght to white light at least?during shootng video with N95??

Very cool there Bhagiratha!
The green stuff looks like a copper oxide to me, perhaps the leftover from thermal paste?
The thermal paste is supposed to make up for the slight unevenness and/or give a better heat transfer if I remember correctly.
Since it's all around the outside edges "squeezed out" that's my assumption.
(don't try this at home folks it will void your warranty and can make you very unhappy if things go bad)

Similar Messages

How to enable flash during video capture nokia n90...

Hi-
How can I turn on or enable flash during video capturing on Nokia n900? Is there a way because I tried to take videos at night and they were unvisible or dim. I know we can use flash while taking pictures!!
Thanks

if your camera settings is on automatic then the flash will be on while recording. that is how mine is set and it stays on.
everything happens for a reason
check out my blog @ http://mycellife.blogspot.com/

Color shift during video capture (moved from Nseri...

I have noticed that the video camera in my n79 is very sensitive to changes in light. Often I get a major color shift during a video capture seemingly for no reason, especially when shooting outside. Is this a defect or should I use a particular setting for video? Current settings are:
quality: High(TV);
scene mode:Auto;
video light: off(shooting video outside during day);
white balance: Automatic (this MIGHT be the culprit?);
Color tone:Normal.
Two stills from the same video are attached; the second, a few seconds later, is unnaturally vivid (almost day-glo!).
Thanks for any suggestions.

Wow, what a quick reply!
Delivery was going to be Quicktime HD and probably downconvering to SD MPEG2 for a DVD. I was just going to edit in HDV, since I'm not doing anything fancy, just to try it out as a workflow option (and previews for the client). The first couple of projects I've started on my Macbook Pro though have had this hue shift (I can post an example on-line if need be by filming my monitor...) It's not inherent in the actual captured QT file, just when being played back in FCP. When I export out of FCP the QT file looks great as well. I've never had this problem on my G5 tower with HDV from the same camera or captured the same way. I'm worried that it's the univeral copy of FCP or even worse, my Macbook!
Make sense?
Thanks

Constant event error being logged during video capture

I recently upgraded my version of Premiere Pro to version CS4. When I now perform a video capture from my DV Device, I get the following error logged in the event window: "file is busy, and couldn't be updated". Until the first logging, there is no RED X in the bottom right corner. Upon the first log, the RED X appears in the bottom right corner.
As far as I can tell, the event error occurs immediately after a scene download has been completed and the next scene is initiated.
The camera I am using is a MiniDV camera (not HD) and it is not listed in the device table within Premiere (Panasonic PV-GS500). I have Premiere's device set to Standard Panasonic and have also tried each of the Alternatives (1,2,3,4 and 5).
Can anyone please help me understand what this error/event means as Adobe is somewhat prehistoric when it comes to providing definitions.

Several possible causes:
1. You are not running as administrator or with administrative rights.
2. You use Win7 and your firewire driver is not the 'Legacy' one. See Adobe Forums: Can not capture under Win7
3. Background processes are getting in the way.
Possible solution:
Try Scenalyzer Live for capturing SD material. Better, more reliable and with more features than CS4.

6220c - red light on video mode?

When i want to record a video (not a picture) there is red light which is useful for red eyes for shoot picture. But for what is when i want to record a video? I do not see a point . If i recording someone near from the phone there is big red rectangle over his face. How to turn this off?!
Solved!
Go to Solution.

by law in certain countries you can not take pictures of and/or record anyone without thier knowledge. the light alerts others that they maybe recorder or have thier pictures taken. i don't think you can turn it off sorry
You know what I love about you the most, the fact that you are not me ! In love with technology and all that it can offer. Join me in discovery....

Processor Red light during G5 take-apart

About two days ago I decided to open up my G5 to do a general dust clean-up especially the power supply. If your computer is down on the floor, believe me .. it picks up alot of dust. I had the service manual for my system, so the take-a-part was easy, being very careful with the cooling unit. To get to the power supply, you need to remove the water cooling system. some pics of the power supply are here, if you have never seen the insides:
http://homepage.mac.com/bhagiratha/POWERMAC_G5/PhotoAlbum19.html
I also decided to take a closer look at the water cooling unit to see if there were any odd things. I was socked when I removed the processors which were screwed down to a part of the cooling unit, and saw this "green" looking thing on the edges. It looks like some of the liquid had licked out and formed this residue. Here is a pic:
http://homepage.mac.com/bhagiratha/.Pictures/PowerPC%20Photos/CIMG0813.JPG
Anyway, I decided to clean it off with some solution before securing the processors back on top. After doing all that, I put everything back together, secured the cooling back on the logic board and powered on the machine (fingures crossed).
the machine powered on, I heard the boot chime and northing else happen. I had no video, keyboard and mouse did work. right and then, I almost died. Am thinking..."my god, did I just screwed-up my only computer". Being a PC tech, this was the very first time taken-apart a G5 machine, so I wasn't sure what had gone wrong. N0n-the-less, I looked through the holes on the front, and noticed a red light which was lit on one of the processors board. And it hit me ... that I had damage one of the chips. So I took out the cooling unit again, and noticed that there were un-even gaps where the chip touch the cooling unit. came out that one of the chips was not touching, and I had to secure it tighter with the screws.
After that ... am now happy to say that I have my baby up and running again. It was a very close call.
So if anyone is thinking of taken apart their G5 .... think about it, and just be careful. Those systems are very delicate. One wrong move and it could be your last.
also, does anyone know what goes in here: it's a mini slot on the logic board that's numbered "J26".
http://homepage.mac.com/bhagiratha/.Pictures/PowerPC%20Photos/CIMG0805.JPG
I also was this material stuck to a plastic back located on the side of the cooling unit but attached to the base metal that covers the power supply. Anyone seen something like this before? I think it is some sort of "dust-catching" material, cause when shook it, dust started to fall out. Mines looked old cause it started to fall apart.
http://homepage.mac.com/bhagiratha/.Pictures/PowerPC%20Photos/CIMG0797.JPG
Thanks

Very cool there Bhagiratha!
The green stuff looks like a copper oxide to me, perhaps the leftover from thermal paste?
The thermal paste is supposed to make up for the slight unevenness and/or give a better heat transfer if I remember correctly.
Since it's all around the outside edges "squeezed out" that's my assumption.
(don't try this at home folks it will void your warranty and can make you very unhappy if things go bad)

Lost segments during video capture

I know I've got enough horsepower to do the job, but every time I attempt video capture either from the S-video input (Hi8 camcorder)or via Firewire (DV camcorder)I get periodic breaks in the captured data. I'm not losing frames per se, I lose 2-3 second segments of the video stream every 9 to 30 seconds with no repeatable pattern that I can see.
I've tried most of the tips found on various sites, ie. eliminating background tasks and registry fiddling with only some improvement.
I've tried the following software:
Intervideo Winproducer
Intervideo Wincinema
Sonic MyDVD
Arcsoft Showbiz
Any help, ideas welcome.
BTW, thanks to the posters here. I've found solutions to a number of problems and some good ideas in the few days I've been lurking here.

On one of my older systems, I've experienced same problem. It was solved by disabling USB in BIOS (I don't have much explanation for this, maybe a strange driver).
On the other hand, try iuVCR (http://www.iulabs.com they could pay me for advertising :D ), it's the only application I've used, able to capture in divx on the fly without loosing frames (of course it depends on cpu frequency, I have athlon 1ghz, capturing 352x288, but on 2.4ghz 640x480 is ok)
Costin

IMovie Importing cuts off during video capture

Hi!
I am in the process of importing a video footage from my mini dv cam tape into iMovie. It seems that iMovie cuts off the video capture after 16 minutes into the duration. I have a 60-minute footage that needs to be captured for iMovie.
Is there a time limit for video captures within iMovie?
Any tips will be greatly appreciated.
Thanks.

Hi
Can it be
- Ken Burns effect
- Zoom in effect
- Image stabilization
All of them enlarhe the picture. Turn them off
- set Crop to ADJUST - and all will be there (letterboxed or columned)
Yours Bengt W

Premiere Pro won't minimise properly during video capture

If anybody could help me with this it would be much appreciated:
I haven't encountered this problem this before but I have Premiere Pro from the CS3 Master Suite running and the capture window is open, capturing video from a deck. When I minimise Premiere I can normally carry on with other work in Microsoft Excel or other similar software. This only lasts for a few moments before the tab for Premiere on the Start Bar starts flashing and deselects whichever program I am working on so that any keystrokes or keyboard shortcuts I use are applied to Premiere and are halting or otherwise affecting the capture process. I need to know if there are any options in Premiere to prevent it from "re-activating" whilst minimised as it is halting the progress of my work, it is flashing away at me now like an insidious little beacon of hate........I must stop it........

If you are capturing SD, try Scenalyzer Live. I have to use it because Premiere does not capture audio correctly from my camera (one of the few that Sony used an odd audio process on). Scenalyzer captures fine in the background. The trial is free. Check a few files to be sure it is working for you; I have an older system (P4), and no problems with captures.

Xserve RAID - to slow during video capture

I have Xserve RAID with 14 drives in 2 stripes ( 2x7 drives ) in RAID5. I can see in my system two "drives" called RAID1 & RAID2 - each 2.18TB.
When I`m using BlackMagic Disk Speed test utility I have only 150MB/s read and 100MB/s write which is to slow for 1080i HD.
What is wrong ? What should I do to get better performance ?
I`m new in Xserve so maybe somebody could explaine me "step by step" what to do.
I read a little about RAID50 but I have no idea how to create it.
Regards.
Rafal Szermanowicz
www.grupa13.com

Those speeds are fast enough for HD capture.
Anyway, to ensure you're getting full speed, make sure:
1) You have the 1.5 firmware on the RAID
2) Enable controller write cache is checked (enabled)
3) Use drive cache is checked (enabled)
4) Allow host cache flushing is DISABLED (unchecked)
5) Use steady streaming mode is DISABLED (unchecke)
For capture, leaving the settings at 8 stripes as prefetch is probably best. If you are going to be doing extensive playback of uncompressed HD, you may want to consider setting the prefetch at 128 stripes.

N8 - Disable red light video recording

Any way to disable the red light during video record? Thanks

I tried all settings, and wherever i could find an option for turning the focus light off, i did.
So, i noticed that once i have settings on macro, it turns off the red light, but only for the first video shoot. If i pause, instead of stopping, and keep recording the video, it's alright.
But once i stop, the red light turns on again. In that case I have to restart the camera pro.
Not a perfect solution, but nevertheless, there is a solution.

N95,GPS, Flash in night for video capture

please help me, i have some questions.
1. when i want record a video with N95 flash dont turn on in night, why ?? i cannt turn on flash for video capture in night>
2. how can my nokia N95 i bought is original ???
3. my GPS doesnt work in iran ?? why?? i must download iran maps on it , or???

15-Jul-200705:21 PM
probit wrote:
please help me, i have some questions.
1. when i want record a video with N95 flash dont turn on in night, why ?? i cannt turn on flash for video capture in night>
2. how can my nokia N95 i bought is original ???
3. my GPS doesnt work in iran ?? why?? i must download iran maps on it , or???
1) The N95 currently does NOT offer the facility to use the flash as a light for video capture.
2) I don't understand your question
3) Your GPS should work in Iran, although there may be an issue with the US (to which all GPS satellites belong to) not allowing Iran to use the satellites - not too sure about this bit.
You will need to download Iranian maps (if available) for the N95 - you can find the download page for Nokia Maps here :
http://europe.nokia.com/A4353385
Also if you follow the link below it'll give you more information on how to get your GPS working :
/discussions/board/message?board.id=connectivity&message.id=8921#M8921
Regards,
Edward

How can I download video from a Canon ZR30 video camera to my IMac. I bought Elgato Video Capture, but the connections do not match. There is no white female end in the camera. Also, the red and yellow connections are loose at the camera end.

How can I download video from a Canon ZR30 video camera to my IMac? I have Elgato Video Capture, but the provided connectors are loose in the camera and the camera does not have a white female end. No signal shows up on the computer when I connect the red and yellow connectors.

Broken solder joints on the camera me thinks!!
sorry

How do get rid of an addon when it's not listed in the Addons? It's a video capture app and (small red circle on the bar) . Help!

I can't remember the name of the addon, it looks like a small red dot on my toolbar. I know that you need to install CSHelper extension in order for the video capture to work.
I don't want to software but as I stated before the addon isn't listed in the Addon section and if it is I don't see it.
I really don't want to have to uninstall it Firefox and reinstall it but I will as a last resort. :(
Any help would be appreciated.

Could be "Download Helper" (Video Download Helper). It has a screen capture option and that option requires CSHelper.
*Info about the screen capture option of this add-on here - http://www.downloadhelper.net/screen-capture.php

Skype Video calling - red light but no video

I did a search but couldn't find anything on the boards. If I initiate or receive a video call, the red light comes on and a black box where the picture should be, but nothing shows up. The audio works fine, but not the video. Is there a setting i need to activate or something?

take a look at the top 12 thread i made. one of them is detailed on how to do skype.
@richwhite
check the network you are on and be sure it is 3/3.5G as the video sometimes takes a while...even if on 3G. depends on the data connection. even though you may be connected 3/3.5g...not all areas of the network have the same data speeds.
also, if you have the cssu installed. it seems it takes a bit longer then before the cssu. may just be my unit.

Red light during video capture on N95

Similar Messages

Maybe you are looking for