Red Light in Output Message for Print

Hello.
When I create an Output Message to Print a Purchase Order, a red light appears in the status column.
Then when a I click over, the system said " No Analysis Log exist".
Does anyone know what turns this on?
I appreciate your help.
Hector.

Hi,
Check following options:
Option:1-->Are you using two output type of Purchase order Print( one is default output type & one you are entering manually).
Check your entry of print operation ( 1 or 2) for your PO output type manually in following path:
SPRO>MM>Purchasing>Message>Output control>Message type> Define message type for Purchase Order-->Fine-Tuned Control: Purchase Order
Option:2-->Have look on dispatch time ( 1 or 2 or 3 or 4) set for output type in NACE t.code
Option:3--> In NACE t.code for output type, check CannotBeChanged check box selected or not in default tab.
Regards,
Biju K

Similar Messages

  • Manually create an output message for GRs

    Is it possible to manually create an output message for a GR that has never been printed?  There was an issue with our output determination and we have a GR that never had a message created when saved so I can't use MB90 to print it.  The problem with the output determination settings has since been resolved; however we need to find a way to print this GR.  Is there a manual procedure?
    Thanks!

    Hi
    You can go to MB02 (material document change), enter material document. Double click on quantity, You can find messages button on the top.assign output and print the same.
    regards
    Srinivas

  • Dispaly of the output message for the not released contract

    Hi, all,
    Is there a possibility, for buyers (conract creators),  to display an output message for the purchasing contract, which is subject to a release procedure, but has not been released yet. Acctually it is possible to do it in ME35K, by indicating the relevant release code and pressing "print preview" after executing the report. But it is not a way out, since buyers are not participating in release procedure and therefore do not have a releasecode.
    Thank you.
    Vadim.

    Hi @Zag_rvn ,
    I see by your post by your post that you would like to be able to change the printer to scan to. I would like to help you out today.
    Please clarify what you are trying to do.
    The Laserjet M251 doesn't have the copy or scanning features available.
    Have a great day!
    Thank You.
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
    Gemini02
    I work on behalf of HP

  • In po,every time i want to add the message for print out.

    in po,every time i want to add the message for print out.
    is there any permanent solution for above issues ?

    Hi,
    1) use transaction nace
    2)Select application EF  and go to condition records
    3) o/p type is neu , select the same and double click on it .
    4) select paricular condition table.
    5) maintain condition records , means for particular combination NEU should appear automatically in PO print.

  • Output type for printing payment voucher

    Dear freinds,
    Can any one tell me what is the output type for printing Payment Voucher.
    Thanks & Regards,
    Santosh.

    For FI config will be done by the functional team you may not see it in NACE tcode, do consult your functional consultant...
    Close the thread once your question is answered.
    Regards,
    SaiRam

  • RED light in Output determination in VA02 for Custom SAP Script

    Hi,
    Am trying to get Order Acknowledgement output from VA02 as a preview. We have custom Script, custom print prog. So, I went to VA02>Extras>Output>Header>Output.....but, here am seeing the associated OUTPUT TYPE ZB00 as RED light!!
    So, pls. let me know that,
    1 - Why am gettign RED light? Wht culd b the reasons?
    2 - How to fix it to get it GREEN?

    Hi,
    Did you try debugging the print program? Also check the output determination analysis.
    Follow below path. Once you are in outputs edit screen...
    Select your output, menu=>Goto=>Determination analysis(or ctrl+f1).
    Here you can see what went right and wrong for all the outputs allowed for that order. You can see there might be some routines which has not been satidfied. Check this analysis for your output and see what is wrong.
    Condition records might also be missing. Check with your functional for this.
    Thanks,
    Vinod.

  • Duplicate output message for invoice

    Hello,
    I'm searching a Bapi or MF to duplicate an output message executed on invoice.
    For exemple:
    on invoice 12345 I create and execute the message RDA0 (for exemple for print).
    Now, by a zprogram I would duplicate this message.
    Any idea ?
    Thank you.

    Hello,
    tks for reply, I run both
    1. RV_MESSAGES_INSERT
    2. RV_MESSAGES_UPDATE
    and the message is created. Anyway, I chose mode 'Archive only', and the archive is not done.
    Do you jnow why ?
    Thank you.

  • Error in Output message for PO

    Hello,
    While saving Purchase Orders I get a warning in message type NEU for the Fax transmission for two particular vendors.When I select the line and check on 'Processing log' button, I see a message in popup as "Error in OPEN_FORM for (purchase order number)".
    Please help.
    Thanks,
    Amit G

    Hi Amit,
    I have found some information that may assist us in determining the cause of your issue.
    The error ME142 can have different causes like missing authorizations or a terminated connection.  Please check SAP NOTE 397691.  This note states that is errors occur when purchasing documents are output, the system generates an error message in the log of the message overview.
    However, error message ME142 'Error in OPEN_FORM for document &' contain only the information that an error occurred and not the error cause. With the attached source code, the error cause is also displayed in the error message (for example, missing authorizations, terminated connection and so on).
    If you apply the note then this will provide more detailed
    information behind the problem you are having. Please apply this SAP note and then you can go further.
    Sanjeev

  • Output Message for Purchase order not being created Automatically

    Hi all,
    I created a Condition type for Purchase order in MN04 with key combination "Doc.Type/Purch.Org/Vendor". The problem arises when i delete this condition record. After deletion when i create purchase order in me21n for that condition type, the system gives an error.
    Message no. 06261 - No message generated for output of purchasing document.
    Is there anyway the purchase order message is created automatically again when its condition type has been deleted from MN04.
    - Regards
    Sahar Khalid

    Before creating the entry in MN04 the message was being created automatically. I want the system to create the same output message as it was creating before the creation of the entry in MN04.

  • Output message for movement type

    Hi
    Where do configure to have Collective or Individual and the print (Tick) by default to have in the material documents.
    Currently my GR or GI documents doesn't have the collective or individual. Manually in MIGO i need to select and tick for print.
    MN21 doesn't help.
    Rgds
    MM

    Hi,
    For automatic GR print which you need setting as default GR Output type as u201CIndividual Slipu201D or "Collective slip" in MIGO.
    Now decide which one you need u201CIndividual Slipu201D or "Collective slip"
    Option-1: For u201CIndividual Slipu201D
    Use T.Code: OMJN, you need activate Individual Slip with field RM07M-WVERS1, Click on Selection button as per your requirement whether you want Required, Hide, Display & save.
    Use T-Code : MN22,clicking on Communication TAB and ticking the check box release immediately & print immediately & maintaining print upon saving should solve this. 
    By doing this as soon GR is saved system will automatically print with individual slip.
    Option-2: For "Collective slip"
    Use T.Code: OMJN, you need activate Individual Slip with field : RM07M-WVERS3, Click on Selection button as per your requirement whether you want Required, Hide, Display  & save.
    Use T-Code: MN22,clicking on Communication TAB and ticking the check box release immediately & print immediately & maintaining print upon saving should solve this. 
    By doing this as soon GR is saved system will automatically print with collective slip.
    Just  check sdn threads for details of GR Print & do setting accordingly:
    MB 90 printout issue
    Material Document not getting printout
    Regards,
    Biju K

  • Output message for invoice reduction

    We need have an output message MLPP, with transmission medium 7 (Simple Mail) to be created only when Invoice Reduction is done. Partner functions to be assigned must be ME (Buyer) and MP (Mail receipient).
    Can someone please advise me how to go about doing this?
    Thanx
    Marinda

    Hello,
    tks for reply, I run both
    1. RV_MESSAGES_INSERT
    2. RV_MESSAGES_UPDATE
    and the message is created. Anyway, I chose mode 'Archive only', and the archive is not done.
    Do you jnow why ?
    Thank you.

  • The same output message for different partner roles

    Hi All,
    Is it possible to create automaticaly in PO the same output message type ( for example - 'mail') for different partner roles( for example - 'VN' and 'OA') ?
    If it's possible,then how?
    Thanks.
    Liza

    Hi,
    Thank you ,but I have a next problem:
    When I  tried in transaction mn05 to add second record for the same output type for other  partner roles.
    I got error message "The condition record entered already exists".
    Regards,
    L.

  • PO Output messages for ECS PO's

    We are on SRM_SERVER 550, SAP 4.7 backend and are moving to ECS scenario (from Classic scenario).
    Although we cannot change the ECS PO copy in R/3, I want to know if we can add new message types in the ECS PO copy which is stored in R/3
    Does R/3 allow changes to the messages (adding new output message, Repeat Output or Change output) for ECS PO's?
    How can we keep the functionality of adding new message types in the PO copy in backend?
    Is there any other way/transaction/option available for this?
    Thanks,
    K.B.

    Hi Kiran,
    I believe you have to create a new PO messages in r/3 if you want to send a po from r/3 instaed of ebp since you are in ECS.
    old consulting note 883693
    Regards
    Muthu

  • Problems in output messages for PO.

    Hi Experts,
    We have a problems with output messages determination, if I have the PO without release approval the system send the output messages ( NEU ) I need that determination doesn't occurs when the po status is unapproved.
    For Explo: I create the PO 45...01 with status unapproved, the system generate tehe messages ( NEU ) but doesnt send to destination, the send only happened when i make the realese.
    There is a file with more details.
    [http://www.easy-share.com/1904410163/POunapproved.doc]
    Thanks,
    Gustavo

    Hi,
    In the release strategy,if the indicator changeablity is 1 the system will not allow you to take repeat out put.
    Solution is that you have to change the release indicator changeability to 6(SPRO>MM>Purchasing>Purchase order>Define release procedure for purchase order>Release indicator>Changeability).
    Another option is that in the message output of the PO in further data change despatch time to 3 and take a repeat out put.
    Also check,
    SPRO > MM > PO > Release Procedure for PO > Release indicator > Changeability of Purchasing Document During/After Release as 2 for Release ID - G and save
    And then Create go to chage mode of PO and repeat the messages
    Regards,
    Rahul.

  • EDI output message for Outbound Deliv send with application own transaction

    Dear All,
    I encountering a problem with the output message "WSOR" via EDI.
    What i want:
           I would to configure this message output without the Dispatch time " 3: Send with application own transaction".
    What is encountering now:
          I have done the setting in "VV22" or VV21, with the conbination of Delivery type and Shipping point. and the setting is EDI with dispatch time 3: Send with application own transaction.
    But When i use ME2O to create the outbound delivery for subcontractor, the message output "WSOR" process automatically and the dispatch time is 4: Send immediately (When application save).
    Can anyone please advice me what are the setting or area that i need to check!!
    Thank you very much,
    Regards,
    Chee Wee

    Hi
    Try here...
    Logistics Execution -> Shipping -> Basic Shipping Functions -> Output Control -> Output Determination -> Maintain Output Determination for Outbound Deliveries
    Regards
    Eduardo

Maybe you are looking for