Red light next to secondary cam in C7

Hello! The other day I found a red light in the front of my C7, almost next to the secondary camera. Tried to find sth about it in the users guide, but nothing, just a picture showing the cam but not the other two "holes" (the left one being a red lignt sometimes). As I don't know what's for, I can't know if the red light was ok or there was a problem. Thanks for your help.
Regards,

I suppose we are talking about proximity censor or ambient light sensor next to it. No need to worry.

Similar Messages

  • HT1567 I can't import an audio cd to itunes to add to my library. I ran a diagnostics test and it had a red light next to: Unable to access audio cd. I am wondering if anyone else has had this problem and if there is an easy solution?

    I can't import an audio cd to itunes to add to my library. I ran a diagnostics test and it had a red light next to: Unable to access audio cd. I am wondering if anyone else has had this problem and if there is an easy solution?

    Satellite L675-S7113 Specifications (PSK3AU-07C02S)
    Satellite L675-S7113 Support Page
    rwls wrote:...since I got it 3 years ago I've been unable to burn an audio CD from ITunes or Windows media although it worked once after the computer had been shut off for awhile..and didn't find the problem until after my warranty had expired...
    From your statements above, it sounds like you never tried to burn a CD for at least the first year that you owned the laptop, as it had a one year warranty on it. While you might have used it frequently to install software,  play DVDs, Blu-Ray disks, etc, that's unclear from your statements. Nonetheless, it might just be dirty-dusty. So, before deleting-uninstalling any software, and given they're cheap, try a CD-DVD Cleaner Disk first and see if that resolves your problems.
    Let us know what happens. Good luck.
    Mike

  • HT1462 The green light next to my camera lens comes on but the picture is black, how do I get it to come on?

    The green light next to my camera lens comes on but the picture is black, how do I get it to come on?

    •  If you have not already done so, restart Mac and
        try again.  If the iSight still does not work, continue.
    • If Apple's http://support.apple.com/kb/HT2090
       suggestions do not help you, (are you certain that you
       used the correct "reset" procedure?), yours is most likely a
       hardware problem that will require a professional fix. 
       Unless you have a current backup, make one now.
      Then use the final "Troubleshooting" suggestion:
    "... contact Apple or an Apple-Authorized Service Provider for service."
    • If you want to try one more thing on your own first,
      use Disk Utility to repair permissions.  Then
      download and apply the latest Combo Update for
      your OS.  Currently, the latest SL Combo is here:
        http://support.apple.com/kb/DL1399
    • Repair permissions again immediately following the system restart
       that completes the Combo update.
    Properly applying the Combo version of updates can sometimes correct software problems, but, if your trouble is caused by a hardware problem, there are no user serviceable parts of iSight. 
    Message was edited by: EZ Jim

  • TS2634 the flashing light next too the camera is stays on,can anyone help me with this problem.thanks

    the flashing light next too the camera is stays on,can anyone help me with this problem.thanks

    Basics from the manual are restart, reset, restore.  Have you tried these?
    Have you read the manual?

  • HT4528 Why is there a little red light next to my speaker in the front by the camera ?

    You see a red light , you see it a lot more in the dark and it fades and comes back and it's right but the speaker underneath the camera in the front .

    I mean I'm using it or like texting or anything I don't always have it on my face like a call, and yet it still shows.

  • Everytime I get a text messages the light next to my camera flashes, is there some way I can turn this off?

    It just started flashing the other day and I didnt turn anything on for it to flash. It like the little flash light bit next to the camera on the back.

    I want exactly what you want.
    Settings -General- Assessibility - LED Flash for Alerts - Turn it off.
    This should do it.
    Let me know if this works.

  • What does it mean when there is a small red light next to my ear piece?

    There is a small circular red light lit up near my ear piece, I've never seen it lit up before and I haven't had my phone wet except for a few drops on the screen that were wiped away shortly after....
    What does this mean? I'm freaking out!

    It usually means that you may have upgraded the version of OS X to a version with which these apps are incompatible.

  • What's the little green light next to the camera mean?

    Sometimes it's on; other times its not.  Also:  it's on when I have Mission Control focused on a particular desktop -- or so it seems.

    It means the camera is on and some program is using it. 
    Captfred
    Facetime, Photobooth, ichat or messages, skype are a few that use it.

  • The light next to my camera won't turn off , how do I get it off ?

    The flash for my camera won't turn off and stays on all the time , how do I turn it off?

    Basic troubleshooting from the User's Guide is reset, restart, restore (first from backup then as new).  Try each of these in order until the issue is resolved.

  • HT1430 Light next to camera will not turn off

    I have an iphone4 & all of a sudden this past week the light next to the camera has come on & will not turn even when the phone is turned off. Anybody ever experience this problem or hear of it??

    Try a reset:
    1. Hold the Sleep and Home button down (together)
    2. For about 10 seconds
    3. Until you see the Apple logo (very important)
    4. Ignore the red slider

  • What does a red light near front camera signify?

    My iPhone shows a tiny red light near its front camera, what does it mean when its on?

    The red light is the digital in light, that is how it reads the headphone jack. The reason the sound doesn't work is because a switch to turn the speakers back on is stuck (note that if you boot the computer, you will hear the startup tone).
    There are several ways to fix this...
    Some have found that putting the headphone plug in and out several times (maybe twisting it a little) will work.
    Others have used a toothpick to adjust the switch (I don't advise this because the toothpick may break).
    Instead of a toothpick, many have used a paperclip (probably best to use an insulated one). I couldn't get this to work, but I would suggest straightening, folding in half, then twisting the paperclip and moving it around in the port.
    You can also use a sewing pen/needle.
    I have seen all of these methods online, but they didn't work for me. I took a que from this instrucable and cleaned my jack with a dry q-tip. I then cut off most of the end and turned it around inside the port. This worked, but after I put the headphones back in the same problem came up, I just did the same procedure again and it worked again (even after I plugged the headphones back in and took them out).
    PS: I woud suggest putting some q-tips and possibly some scissors in your MacBook bag in case the problem arises on the move.

  • Leopard 10.5.6 client 10.4.11 server red light in Directory Utility

    Can some one please help or give me a few pointers
    Im running OS X server 10.4.11 as an OD Master, i was able to bind my Powerbook running 10.5.4 to my OD and was able to login, once bond the server was listed in Directory Utility with a green light and was responding normally. However ive just installed the 10.5.6 update on my powerbook and now get a red light next to my server in Directory admin, it wont let me unbind unless i do a forced unbind and then a rebind still comes up with the same, red light next to server and server is not responding. I can no longer login to my OD accounts from the client
    Anyonw have any ideas
    thaks
    John

    dcwong wrote:
    We are running Mac OS X 10.4.11 server and recently have problem of saving/transfer any image files (.jpg) to the server and giving this message "The finder cannot complete the operation because some data in xxxx.jpg could not be read or written. (Error code -36). We start having this problem after the system upgrade from 10.5.5 to 10.5.6 on one of our 20" imac. We do not have this problem with Tiger 10.4.11 clients.
    I'm having exact same error code right after updating imac to 10.5.6 from 10.5.4. Trying to save to 10.4.11 server running basic file sharing (not server version) produces error: "The finder cannot complete the operation because some data in xxxx could not be read or written. (Error code -36)."
    Transfering a file to the network volume produces a stall for about 2 minutes with no visible warning or spinning beachball, then comes back with error.
    I'm able to create a folder on the remote volume, have double checked permissions, and copying from remote volume works fine.

  • What is the little red light?

    What is the little red light next to the ear speaker on the iPhone 5? It's very hard to see unless in a very dark room and it goes off when I lock my phone.

    I saw a forum saying that was what it was. I felt that if that was so that it would stay on even when my phone is locked? Also there are multiple reports of people knowing for sure that there is no water contact with their phone and they still see the light.

  • Green light pemanently on by camera heeeeeelp

    hi
    i updated my mac last night with some standard updates.. itunes etc.
    ive turned it on this morning and the green light next to the camera is permanently on. when i open up photo booth it just shows a green screen.
    if anyone has any ideas that would be great
    thanks

    Hello All,
    My problem has just been resolved.
    I downloaded the OnyX and run the 'automation'.
    After OnyX completed the test I shut down the machine and the web cam turned back operational when I turn on the PC.
    Hope this helps.
    Cheers

  • Red Light On Next to Verizon Logo

    I have a steady Red light on my Incredible 2 next to the Verizon logo. Had this phone over 2 years - never saw this light before, nor can I find ANYWHERE what the heck this means. I've tried resetting. Also, battery is draining very quickly. This came on suddenly.

    KinquanaH_VZW what in the world would the charging port have to do with the proximity sensor?  Not to mention other chargers and outlets?  Like I suggested to lasinah_vzw please read the OP thoroughly before attempting to answer a question.  The OP clearly states that the light is to the LEFT of the Verizon logo, whereas the notification light (which blinks orange when the battery is low, and is solid orange when the device is charging) is in the speaker grill, to the RIGHT side of the phone.  I also find this disturbing that I have already addressed this and you also make the same incorrect suggestion.

Maybe you are looking for

  • Can't get FCKeditorAPI to load to validate HTML Editor contents

    I have an HTML Editor item on my page and wanted to quickly check the length of the text in the editor before submitting the page. It should be possible to get the contents of the HTML Editor using the FCKeditorAPI, but I can't get it to load. I'm do

  • Migration from BO Edge Series to BO enterprise solution

    Hello Everyone, Is there any possibility of migration from BO Edge Series to BO enterprise solution? Will appreciate If you could please help me with some document / details on 1. Quick difference between Edge and Enterprise Series 2. Migration path

  • MDX Parser error

    Hello, While checking the MDX Parser connection in TR SM59, I get the following error... Error occurred when starting the parser: Error opening an RFC connection. Message no. BRAINOLAPAPI011 Diagnosis Failed to start the MDX parser. System response E

  • Mount a directory like WEBDEV in windows in Linux/Unix

    I want to access the Files from a linux/Unix machine through a simple thick client . Is it possible to mount a directory like WEBDEV in windows in Linux/Unix.

  • (spanish) pantalla negra al usar y no cambia hasta apagado forzoso

    mi macbook pro retina 13" 512 gb varias veces me ha pasado que cuando queda en reposo y lo enciendo queda la pantalla negra y no enciende, me toca reiniciarla