Red light on 9300 keeps on blinking

hello everyone , am having a problem with my 9300, the red led light keeps on blinking , even though there is nothing on screen.
any help will be highly appreciated.
i also want to instal again the os on my mobile any guidance please.

OS install steps:
http://us.blackberry.com/support/installpc.jsp
Please click the Thumbs Up icon if this comment has helped you!
If your issue is resolved, please click the solution button on the resolution!
Every BlackBerry should have BlackBerry Protect, get it now! | Follow me on Twitter | Bring Back BBM Music!

Similar Messages

Red light and won't charge

I got my bb 9300 a couple of weeks ago. my problem is that it suddenly shuts off and the led would turn to red light. it won't turn on. I thought it was just battery empty or something so I charge my phone, it them keeps on having red light and then keeps on having this image of no battery or something. It did turn on one time then vibrates hard and then turns off again. After that it won't turn on. just red light, no battery. Please help.

If you tried a wall charger (that previously worked with your shuffle) and computer ports, the most likely cause is a problem on the iPod. At seven months, it may not be the battery (although it sounds like you use it a lot every day), but it sounds like the battery is unable to charge.
Does the iPod still appear in iTunes when you connect it? If it does, you can try doing a Restore using iTunes.
Restoring iPod to factory settings - Apple Support
If the wall charger is something you did not previously try, it's possible that the computer's USB port is not supplying enough power. As a test, shut down (power off) your computer and disconnect all USB devices (including any hubs). You can leave standard keyboard/mouse connected, if used. If the computer is a laptop, connect its power adapter so that it's not running on battery power. Put the shuffle power switch in the OFF position. Start up computer, run iTunes, and connect iPod to a direct USB port on the computer.
At seven months, it is still under warranty.

Z10 Red Light Keeps Blinking

my bbz10 red light just keep blinking wat should i do

you have either a email, miss call or some type of text notification.

Red light keeps blinking

I recently purchased the new 1gb i pod shuffle. the problem is that i left it plugged in to my computer to charge but when i safely removed it, the i pod shuffle went really hot and ten minutes later the red light started blinking and so i don't know what is wrong with it

My question is not necessarily that there is a red
light, but a series of green and orange flashing
light, followed by no sound of any sort. I've
upgraded the ipod and tried to down load new songs
and it simply won't play them. That is when it
flashes green and orange dots.
Alternating green and orange means no playable content (ERROR: No music loaded). Alternating green and two orange (10 seconds) means ERROR: iPod shuffle must be restored
Which are you experiencing? If the first, then you need to select one of the songs and click on File>Get Info>Summary and let us know what it says.

8900 - Won't Power on. Red Light blinks only! Please help!

I have a Blackberry 8900 and this thing is driving me crazy!
To start, I woke up one morning and had a white scrreen and an error 502. I wasn't able to fix the issue immediately since I had class. I'm usually more attentive to my phone but I'm in law school. Anway, the next day I went to try to fix my phone, it would not power on at all. I just got the red light flash. When plugging it in to my computer, I got the sound it was connected but the AppLoader, JML_Cmder and DTM would not recognize the device. Frustrated, I put the phone aside again to concentrate on school.
So, I've decided to give this another shot but now it's gotten worse. The phone does nothing unless it's plugged up and it's still just that annoying red light blinking. I keep the phone plugged and remove the battery...still that blinking and the pattern is long pause, blink, short pause, blink, blink, blink repeat. Again, there is NO ACTIVITY when the phone is unplugged. Same thing when I plug it into my computer. The battery does not make a difference and doing a battery pull does not work. My computer does not recognize my device at all (no sounds, no connection, etc). I have tried to let it charge from a wall charger and it did nothing but that blink pattern for 12 hours.
Is there anything else I can do? It's an AT&T phone I purchased and use with T-mobile and both companies are being asses. Any last suggestions before I buckle and just throw the **bleep** thing away.
Again, I have tried the AppLoader through c:\program files\common files\research in motion\app loader, I have tried using the Command Prompt, I have tried JML_Cmder, I have tried the battery pull, I have re-installed both the DTM and the Blackberry USB and Modem drivers...
Anything else I could possibly try? Also, does anyone know what that blink pattern means?
And please don't suggest what I've listed already. Thanks!

Just to make sure you haven't missed a step, when you tried the Loader.exe file, did you try the steps to fix a nuked BlackBerry? The trick here is to remove the battery on the device, open the Loader.exe file, go to the second screen, then plug your phone in without the battery. As soon as your computer recognizes the phone, click next. This should be able to catch the JVM and allow access to reload the OS. Then once you get to the next screen, you can reinsert the battery.
If you have already tried that, then see if you can ensure that the battery is charged in another BlackBerry, or see if you can try another battery.
If none of that works, then let me know as there are still some other things we can come up with.
If you want to thank someone for their comment, do so by clicking the Thumbs Up icon.
If your issue is resolved, don't forget to click the Solution button on the resolution!

Blinking Red Light

Greetings,
I'm missing messages because when I receive a message, the red light blinks for only a minutes or two. Can I change it to blink until I check it?
Thanks,
Shane.
Z10 STL100-3 (version 10.3.1.2708)
LTE Playbook (version 2.1.0.1917)

rat-7 wrote:
keithbergoff wrote:
If no one else has a suggestion, backup, reload OS and restore.
Keith you are wrong, the LED will blink only for about 15 minutes unless the messages have been checked before, after about 15 minutes the LED stop blinking to save battery life
It has been like that since 10.0, and it is the same for the Z30 as well
I could be wrong, I use CascaRun app that keeps the display on permanently (45 to 75min), during that time the LED has not stopped blinking when I receive a message. Other times I have never seen an unread message in the HUB when the LED was not blinking.
S.Goodman also mentioned a minute or 2, not 15 min.

Phone died and I put it on the charger and the red light keeps flashing.

Phone died and I put it on the charger (wall charger) and the red light keeps flashing. It's been doing that for a little less than an hour, I pulled the batttery twice & get the same light flashing. I also read othe posts and it says to just let it charge for a few hours but i don't think it's gonna work. If you know anything about it let me know please & thank you.

When connected to the charger, is the "no battery" symbol showing?
Leave the device to charge 2-3 hours, and then, still connected to the USB cable, remove the the battery from the device a few seconds and reinsert it. If it boots--leave it to charge to 100% (check Options > Status for the percentage). If it doesn't reboot on the first attempt, leave it several more hours. I've had one charge for two days before it came back to life after an extreme battery depletion. Every 3-4 hours, with the device still connected to the charger, you can remove and replace the battery to see if it reboots.
1. If any post helps you please click the below the post(s) that helped you.
2. Please resolve your thread by marking the post "Solution?" which solved it for you!
3. Install free BlackBerry Protect today for backups of contacts and data.
4. Guide to Unlocking your BlackBerry & Unlock Codes
Join our BBM Channels (Beta)
BlackBerry Support Forums Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

Xperia z2 dead , red light blinking when connected to usb charging cable

My phone is totally dead, i cant do anything power button + volume up button , force restart button near the sim , and nothing happens , also when i connect to a usb charger the red light is blinking all the time . Please HELP ME i need my xperia z2 back to live....

Hi,
For how long time have the phone been connected to the charger? If the LED is blinking red, it sounds like the battery is completely flat. Thereby it can take a longer time before the phone indicates charging and/or powers on. I suggest that you connect the phone to the charger via wall socket and let it charge for 1-2 hours.
- Official Sony Xperia Support Staff
If you're new to our forums make sure that you have read our Discussion guidelines.
If you want to get in touch with the local support team for your country please visit our contact page.

Blackberry Curve 9220 Won't Switch stuck On only red light blinking RED LIGHT! HELP!

my blackberry is stuck on red light blinking oleas help me no problem if all the data is lost i dont care i want my phone back it hase been 3 -4 weeks . light is blinking until the battery goes down and it wont charge also i have to get the battery charged by other phone plzz help mee........

Hi and Welcome to the Community!
Please try this sequence...note that, throughout the entire 4h15m process, your BB must remain directly connected to a known-good wall charger (not PC USB, not a cradle):
With the battery inside, connect your BB to the wall charger
Leave it alone for 2 hours, no matter what the LED or the display does
Remove the battery
Wait 15 minutes
Insert the battery
Wait another 2 hours, no matter what the LED or the display does
This has been known to "kick start" some BBs.
It is also possible that your battery or BB has experienced a problem...to test, this sequence is needed:
Obtain an known good and already fully charged additional battery...use it in your BB and see what happens
Obtain access to a known good and identical BB...use your battery in it and see what happens
The results of this will indicate if it's your BB or your battery that has the problem. Note carefully please that "new" and "know good" are not necessarily the same things. While rare, a "new" battery certainly could be defective. Rather, the simplest (and least costly, btw) method to conduct this test is to find someone with an identical BB who has no issues...trade batteries and see what happens.
Good luck and let us know!
Occam's Razor nearly always applies when troubleshooting technology issues!
If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
Join our BBM Channels
BSCF General Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

Pearl 8100-Rogers not turning on-Red light blinking

Hello
I have new Blackberry Perl 8100.I got this from Rogers.It was sitting in box for few month.I tried turning on but it is not turning on.I left the phone in charge for more then 2 hour and it is still not turning on.
I tried taking out battery but and replacing back in but stillit is not turning on.I can only see red light blinking.nothing else.pls help me .thank you.

Leave the device to charge 2-3 hours, and then, still connected to the USB cable, remove the the battery from the device a few seconds and reinsert it. If it boots--leave it to charge to 100% (check Options > Status for the percentage).
If it doesn't boot--try using a wall outlet charger if you are not. If you are connected via USB to the PC, make certain that you have Desktop Manager (or the USB device drivers) installed, which you can download below.
Make certain your USB cable is connected to one of the PC's main rear USB ports. Not a USB hub, nor a monitor USB port, nor a USB port on the front of the PC.
Download Desktop Manager from here:
https://www.blackberry.com/Downloads/entry.do?code=A8BAA56554F96369AB93E4F3BB068C22
1. If any post helps you please click the below the post(s) that helped you.
2. Please resolve your thread by marking the post "Solution?" which solved it for you!
3. Install free BlackBerry Protect today for backups of contacts and data.
4. Guide to Unlocking your BlackBerry & Unlock Codes
Join our BBM Channels (Beta)
BlackBerry Support Forums Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

Updated to v4.5 now phone not working, red light blinking

K...so I updated to the new software v4.5 on my 8320 curve and now it is not booting up and the red light is blinking twice every few seconds. I have already removed the battery and done everything that I can think of without using JML because I don't want to lose my info....please help...thanks.

I fixed my problem. I found this on the tmobile support site, and it worked after the second try.
Handheld does not turn on and the light flashes
Ensure the handheld is NOT connected to the computer.
In BlackBerry Desktop Manager, open Application Loader and Update Applications.
Remove the battery in the handheld.
Reconnect the handheld to the computer
When the Drop-down list on the Communication Port Selection window changes to USBIN, click Next.Note: If there is no USB option in the drop-down disconnect the device, remove the battery and re-connect the device without the battery.
If the Handheld Password Required dialog box appears, type your password. The Application loader will detect the BlackBerry device.
Proceed with running Application Loader. Allow the Application Loader process to complete; this can take 30 - 45 minutes.Note: If the battery was removed during step 5, make sure it is re-inserted when the Application Loader comes to the Wait For Device Initialization stage.
Do not disconnect the device from the computer until you receive a message your PC, “The loading operation was successful.”

Tablet fails boot, red light, then blinking green....GRRR!!

Just as my tablet recieved the OS update, it no longer booted.
It was fully charged, and plugged into a standard micro USB at the time.
It said download was successful, restart now... so I did.
And I never could use it again.
When I tried to boot it, it had a red light, then the red light blinked a few times, then nothing.
And then, it blinked green six times. then nothing.
I tried a USB to my computer to use Blackberry Manager (latest version).
I tried of course, the various holding down the power button schemes, including the old one of holding down ALL the keys, and the new one with just the power and forward keys. Nothing.
I went on EBAY to get an OEM charger stand. I hope that works, but I don't have much hope for that.
And now, nothing. My blackberry is a brick after the update.
I came to like blackberry because of the reliability of the phone. While all of my iphone friends were crazy about tech support of apple, I replied, I don't need tech support with my blackberry (curve) nothing ever goes wrong.
But this whole situation, is getting me down.
Solved!
Go to Solution.

Connect it to the OEM wall outlet charger.
Press and hold down the power key ONLY for 20 seconds.
1. If any post helps you please click the below the post(s) that helped you.
2. Please resolve your thread by marking the post "Solution?" which solved it for you!
3. Install free BlackBerry Protect today for backups of contacts and data.
4. Guide to Unlocking your BlackBerry & Unlock Codes
Join our BBM Channels (Beta)
BlackBerry Support Forums Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

Torch 9800 wont turn on and the red light blinking..

hi..im new at here..ive got problem with my bb torch 9800..last day after charging my phone..it cant turn on and the red light blinking..ive tried connect my phone to computer but it cant recognize my devise..ive tried many way to solve it like using BBSAK but it still cant connect to my devise..id tried using blackberry devise manager software but the problem still exist..really2 need ur help now..
*ive update my phone OS to the latest one..didnt know if that is the problem..need ASAP..

Hi and Welcome to the Community!
I am very confused by your post. You say you can't connect your device...to your computer? If so, how did you manage to upgrade the BB OS? Given that, from what you've described, you can use BBSAK, that would require connecting to your computer, but then you say you can't. So I'm confused.
Please try posting again, and be 100% clear about exactly what the symptom is that you wish to resolve, exactly all of the steps you have attempted (e.g., "like using BBSAK" isn't enough...what, exactly, did you do with BBASK?), and exactly the results of each step of what you have attempted.
Thanks and let us know!
Occam's Razor nearly always applies when troubleshooting technology issues!
If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
Join our BBM Channels
BSCF General Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

After upgrade attempt for 8310, device will not restart -- only blinking red light

Problem: I tried to upgrade the device software to 4.5, and now THE DEVICE WILL NOT RESTART AT ALL. Not with a hard reset. Not using the SIM and battery from my 8310 and putting it in hers. Nothing. Just a red light that blinks in a pattern: two quick blinks, then a pause; two quick blinks, then a pause, etc.
Background: This 8310 had vers. 4.2.2 device software, and something like 2.6 on the desktop. I downloaded/upgraded to 4.6 for the desktop and 4.5 for the device from the AT&T site. The Desktop manager prompted me to install the new device software... looking good. After several minutes, I got an "unknown error" message and it stopped the install.Following a support article, I uninstalled reinstalled both updates, but then the problem occurred: no NOTHING happens on the device screen at all, just the blinking red light when the device is plugged in.
The AT&T store tells me this is about the tenth "dead" Curve he's seen in about a week, apparently all occurring when folks have attempted a software updgrade. Any thoughts/help to offer?
Please help!
Solved!
Go to Solution.

Check this instruction:
http://crackberry.com/blackberry-101-lecture-12-how-reload-operating-system-nuked-blackberry

HELP! Double blinking red light

I was in the middle of upgrading the software on my curve 8330, the software stopped doing anything, and now my phone is off and just has a double blinking red light.
I figure its now dead, but how can i fix this using my mac?
I see plenty of instructions on how to load a new OS using a PC, but none for a mac
Any help would be greatly appreciated!

Welcome to the forums
It seems you may have wiped the OS due to the accidental shut down. Try pulling your battery out and reinserting it to see if the phone boots up. If not, see how to restore a bricked blackberry: http://crackberry.com/blackberry-101-lecture-12-how-reload-operating-system-nuked-blackberry
If you have a recent backup, you can load it onto the phone once you are done.
Kijana
Please remember to:
1. Mark Accept as Solution on the appropriate post once your issue has been resolved
2. Give Kudos to helpful posts (click the star next to the post)
Thanks

Red light on 9300 keeps on blinking

Similar Messages

Maybe you are looking for