Red lines surrounding mouse cursor arrow, shutdown

noticed that four small dotted red lines have appeared around the cursor arrow..lines only follow mouse movement and do not appear anywhere else on the screen...my imac just now froze as i was scanning in a pic. i've done a manual restart and everything looks fine, starts to go through the "your computer did not shut down properly" screen without a hitch and then the dancing red lines appear. mac can make it through this screen but then freezes in main startup. this is the third time ive had to do a hard shut down. ??
has anyone run into the dancing red lines before? any suggestions?
any help is greatly appreciated
(btw: accessing internet from a pc at work)
imac   Mac OS 9.2.x  

Hi, monica -
Just a thought - do you have the CloseView control panel installed? If so, try turning CloseView off within that control panel, or use the keyboard shortcut to toggle it off, which is Command-Option-K.
If you can't get the machine booted successfully to get to that control panel, then try booting with Extensions Off - hold down the Shift key from the start of booting until the desktop has fully loaded.
Then drag that control panel out of the Control Panels folder (in System Folder) and restart. I'm not sure if that control panel uses an associated preferences file, but you might look for one (System Folder >> Preferences) - if there, remove it to the desktop also.

Similar Messages

  • Weird lines follow mouse cursor... (PICS)

    I have a iMac 2.4Ghz and it has weird lines that follow the mouse cursor at all times. Does anybody have suggestions as of what it could be? Computer is out of warranty.
    Here's a pic.
    http://tinypic.com/r/5bryap/3

    Before concluding it is hardware related (which is possible), I would start up from a different system (such as your Mac OS X installation disc). If that makes the problem go away, you can try to further isolate the cause by booting normally and creating a new admin user account using System Preferences Accounts pane.
    http://docs.info.apple.com/article.html?path=Mac/10.5/en/8235.html
    Log out and log in to the new account. In the new account, do you see this problem. Since the new account uses default user preference settings (and does not have any third-party background processes), if the problem goes away, there must be something in your normal user account that is the cause.
    Actually, before you do anything else, if you have not done so already, you should do the general trouble-shooting +first steps+, reset PRAM
    http://support.apple.com/kb/HT1379
    and run +Repair Disk Permissions+ in Disk Utility.

  • Can I hide the mouse cursor/arrow/pointer

    I am running Opera in Kiosk Mode, and I was wondering if the mouse could be set so that when it wasn't moved for a short period of time, the arrow would disappear. If you would go over and touch the mouse, the arrow would show up. Kind of like when you watch a movie on your computer full-screen, the arrow fades away. Thanks.

    That is exactly what I do now, I bury it in the lower left hand corner. It can still be seen, and I can live with it, but I want to schedule the machines to turn on and off. When they do that, the default position where the mouse arrow appears is in the upper right hand corner, about 20 pixels in from the side edge, and 20 pixels from the top edge.

  • Weird red line through arrows vs pointer when I try to use my mouse to grab stuff per usual

    Anyone know why my screen is locked & not allowing me to move or place anything? & the cursor has a weird red line through arrows pointing in opposite directions when I try to grab anything. Uhmph

    You have selected the Slip Tool.
    If its not over a clip it gets the red line.
    Select the Selection Tool (V) for placing moving around etc. of clips.

  • Four black lines have appeared behind cursor arrow

    While jsut about click on a bookmark 4 10mm high black lines appeared behind the cursor arrow and at the same time the computer crashed- went black with a message in 4 languages informing me to hold down power button.
    I turned it off and then back on and it started fine but the 4 little lines are still there..everywhere the cursor arrow goes! I turned it off again, popped battery out (as you do...) put it back in, started it up again and guess what? Well given I'm sitting here typing this message... yep they are still there!
    Is there a way to remove them or am I destined to have to grow used to them forever?
    As said they are 10mm high, 2/3mm apart and start with the left hand line directly behind the arrow. Very annoying little buggers too.
    Any help would be great!
    Alex

    I have just been to system preferences- universal access- mouse and trackpad- cursor size. As I increase the size of the arrow the lines get bigger too until about 3/4 then they disappear - but leaving me with an arrow that is 4 feet tall....

  • Cursor arrow gone from solid black to having white lines go through it and trackpad is not working properly in mail and adobe acrobat - anyone know how this could have happened and how to solve it?

    Can anyone help me?  Concerned that I may have some kind of malware.  My cursor arrow and trackpad are behaving strangely,  The cursor used to be a solid black arrow but now seems to have horizontal white lines running through it.  The trackpad does not function normally either.  For example, when I use my trackpad to scroll up and down in mail  it sometimes works and sometimes does not.  In adobe acrobat it sometimes does not work.  In facebook, the cursor does not line up behind the menu keys as it should.
    Any one know how this might have happened and how I can stop it?

    Please read this whole message before doing anything.
    This procedure is a diagnostic test. It’s unlikely to solve your problem. Don’t be disappointed when you find that nothing has changed after you complete it.
    The purpose of the test is to determine whether the problem is caused by third-party software that loads automatically at startup or login, by a peripheral device, by a font conflict, or by corruption of the file system or of certain system caches.
    Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards, if applicable. Start up in safe mode and log in to the account with the problem. You must hold down the shift key twice: once when you boot, and again when you log in.
    Note: If FileVault is enabled, or if a firmware password is set, or if the boot volume is a Fusion Drive or a software RAID, you can’t do this. Ask for further instructions.
    Safe mode is much slower to boot and run than normal, with limited graphics performance, and some things won’t work at all, including sound output and Wi-Fi on certain models. The next normal boot may also be somewhat slow.
    The login screen appears even if you usually login automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
    Test while in safe mode. Same problem?
    After testing, reboot as usual (not in safe mode) and verify that you still have the problem. Post the results of the test.

  • Black box (line) surrounds and follows mouse, 'mini' screen size, PIP?

    Hi,
    I just tried to install the new wireless mighty mouse and wireless apple keyboard.
    The mouse worked for a minute, but the install of the keyboard killed the BT mouse and now there's this ANNOYING black box around the mouse cursor.
    After playing with it I've noticed that the pointer cursor, which is surrounded by this box (4:3 ratio box, approx 2" wide by 1.5" tall on my 20" 1600x1200 monitor).
    The odd thing is the cursor's position within this box moves in correlation with where on my overall desktop the cursor is placed: If I put my cursor in the upper right corner of my whole screen, the mouse cursor is also in the upper right corner of the small 'box'; if I move it to the lower left of the screen, it is also in the lower left of the box, and so on for the other two corners, and if it's in the middle of the screen, it's in the middel of the little black box.
    So this seems very strange.
    Oh, and neither the BT keyboards or the new mighty mouse BT will show up in the BT menu as recognized devices, though they did just briefly in the beginning.
    So after buying a new USB hub to be able to plug in the Apple/Belkin USB hub along with the Apple store's D-Link USB Bluetooth adapter and a new BT keyboard and mouse - $200 for a wireless keyboard and mouse, all I have is ultra annoying new software problems and all the same wires as before, with an additional keyboard and mouse on my desk. UGH!!!
    Can anyone help with this 'black box around the keyboard issue, at least?
    Thank you soo, so much for any solutions!
    Sarge
    Oh and this weren't enough my barely used video ipod video 60 GB self-distructed this AM - melted inside somehow. I am in Apple ****.

    GREEN STAR FOR YOU!
    Of all the things - somehow, and I've never even been into this control panel, inside the Universal Access/Seeing/Options dialogue, the box was checked saying "Show preview rectangle when zoomed out".
    I unchecked this, and it went away. I had not selected this, ever. How it happened, I don't know except that I do have a Logitech NuLOOQ tooldial device which I had unplugged from USB while troubleshooting my BT wireless keyboard and mouse, and this device requires having the 'enable access for assistive devices' checked in the Universal Access control panel.
    Perhaps unplugging that device somehow lead to this problem, but otherwise I've never 'visited' the UA pref panel or checked anything in it.
    Odd, but THANK YOU for the suggestion!!!
    Sarge

  • Mouse cursor appearing as an arrow instead of a hand over album links

    Hi. I've just published my iWeb 08 site on .Mac (using Zone Edit to set up the CNAME for my personal domain, purchased from Last Digital). For some reason, when I hover over the links in the My Albums page, the mouse cursor appears as an arrow instead of the usual hand cursor. This has already confused a few of my testers, as obviously people are conditioned to expect a link where they see a hand. The links themselves work fine, it's just that the mouse cursor makes it look like they're not links. Does anyone know how this can be fixed so that the hand appears when you hover over each image? You can see the page in question here - http://www.paulinelockie.com/Pauline_Lockie/Portfolio/Portfolio.html

    That's the way it is.
    When you have multiple images in an album, and move the pointer over the album, you see the images displayed.
    Since it is not really a link, a pointer is used instead of the hand. It's a design decision.
    Send a feedback to the iWeb team.

  • In facebook, When I access a picture directly, I am unable to advance the photo forwards or backwards using the mouse/cursor or the arrow keys.

    I am using Firefox 16.0.1 on a macbook pro using 10.7.5 software.
    When I access a picture directly, I am unable to advance the photo forwards or backwards using the mouse/cursor or the arrow keys. The same is true if I use an external mouse.
    If I use Safari as the browser, I don't have this issue.
    This problem just started a couple of days ago.
    All had been working fine.

    Many site issues can be caused by corrupt cookies or cache. In order to try to fix these problems, the first step is to clear both cookies and the cache.
    Note: ''This will temporarily log you out of all sites you're logged in to.''
    To clear cache and cookies do the following:
    #Go to Firefox > History > Clear recent history or (if no Firefox button is shown) go to Tools > Clear recent history.
    #Under "Time range to clear", select "Everything".
    #Now, click the arrow next to Details to toggle the Details list active.
    #From the details list, check ''Cache'' and ''Cookies'' and uncheck everything else.
    #Now click the ''Clear now'' button.
    Further information can be found in the [[Clear your cache, history and other personal information in Firefox]] article.
    Did this fix your problems? Please report back to us!

  • Mouse Cursor is red

    The mouse cursor on the screen has turned red and become larger. Every time it passes by something it clicks on it. what can I do to fix this.

    Hello Dejay74464,
    I see that you are having problems with the mouse cursor on your computer. I would like to help with this issue but I need some information.
    What operating system are you using?
    If you check inside of mouse properties can you change the settings for the pointer/cursor? To get to the mouse properties go to the start menu and type "mouse" in the search box under all programs. There should be a "pointers" tab where you can change the cursor settings.
    ↙-----------How do I give Kudos?| How do I mark a post as Solved? ----------------↓

  • How do I change my mouse cursor back to an arrow? Using Safari, it suddenly changed to a crosshairs icon. Help pls!

    how do I change my mouse cursor back to an arrow? Using Safari, it suddenly changed to a crosshairs icon. Help pls!

    I have this question too but I found the answer at another thread. It is due to Adobe PDF plug-ins. In case you haven't seen it, the link is as follows:
    https://discussions.apple.com/message/21976207#21976207
    All the best.

  • My macbook pro decided to give a different res and a horizontal line follows my cursor (like a diagnostic mode or something) i have shutdown/restrted. Fixed the res but the cursor problem still exists any help please.

    I was using my mac as normal and then my resultion on mr screen changed which i have fixed using the normal methods but i still continue on getting a horizontal line whereever my cursor is even after i have restarted and shut down. The line is a white colour but my other screens seem dulled wherever this line is not following it is not a solid white. It looks like its in a diagnostic mode or somthing. Any help would be appriciated, thanks.

    It is possible there is a problem with the computer's graphics, but try a simple fix. viz. reset the NVRAM / PRAM.
    Resetting NVRAM / PRAM
    Shut down your Mac.
    Locate the following keys on the keyboard: Command (⌘), Option, P, and R. You will need to hold these keys down simultaneously in step 4.
    Turn on the computer.
    Press and hold the Command-Option-P-R keys before the gray screen appears.
    Hold the keys down until the computer restarts and you hear the startup sound for the second time.
    Release the keys.

  • Is there a way to get rid of those "red lines and boxes" that surround email text?

    The red lines and boxes I refer to in the question do not cause any real problems, but editing email, cut and pasting, etc., can get a little complicated with them appearing in the text of an email. I couldn't see any setup or option that referred to these red lines and boxes. Can they be eliminated? Thanks!

    You are seeing combing arifacts due to the computer monitor's inability to display interlaced video correctly.
    This is particularly noticable when the Canvas is set to a size value other than 100%.
    If the end product is meant to be put back on DVD and shown on a TV it will not be an issue, if you are going to the web, change your field dominance to none in the Sequence settings before exporting (or in Compressor, which will do a better job).
    Don't change it while editing - this will mean you have to constantly render.

  • When forwarding a message it is surrounded in red lines how do I elinmate them

    When forwarding a message it is always blocked with red lines around the message and heading. I have never had this happen with other email programs such as Windows Live, hope you can help eliminate this very annoying problem.
    Thanks.

    Ignore them. They are Thunderbird's attempt to help you navigate complex systems of frames, often resulting from multiple forwardings. They let you decide exactly where in a message you will insert new content. I do occasionally try to flatten the content by taking out unnecessarily nested frames, but it's usually not worth the effort.
    Send a copy of such a message to yourself and you'll see they are invisible to the recipient - until it is re-edited in Thunderbird.

  • Gnome Black Screen with Mouse Cursor after Login

    I am using Archlinux 64bit with a Gnome Desktop Environment. Everything was running normally uptill today. When i ran "sudo fc-cache", my system froze. I couldnt open any other app but i was able to access terminal. I restarted using "reboot" command. After that I was unable to log in to my desktop.
    The Gnome login screen comes and after entering the correct username and password, all I can see is a black screen with mouse cursor. I then started gnome manually with "startx" and it worked. But still I am unable to use normally (that is the graphical login). I reinstalled gdm but it didnt work. Please help me out.

    there are a lot of processess running... dunno killing which process will not cause a problem
    here is the xorg log  ( sorry i dont have much knowlegde to analyse it )
    [ 2957.489]
    X.Org X Server 1.16.1
    Release Date: 2014-09-21
    [ 2957.493] X Protocol Version 11, Revision 0
    [ 2957.494] Build Operating System: Linux 3.16.1-1-ARCH x86_64
    [ 2957.495] Current Operating System: Linux defo-arch 3.17.1-1-ARCH #1 SMP PREEMPT Wed Oct 15 15:04:35 CEST 2014 x86_64
    [ 2957.495] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-linux root=UUID=3c376af4-e330-4277-8bfa-388dabfced9e rw quiet
    [ 2957.497] Build Date: 21 September 2014 10:53:13AM
    [ 2957.498]
    [ 2957.499] Current version of pixman: 0.32.6
    [ 2957.501] Before reporting problems, check http://wiki.x.org
    to make sure that you have the latest version.
    [ 2957.501] Markers: (--) probed, (**) from config file, (==) default setting,
    (++) from command line, (!!) notice, (II) informational,
    (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
    [ 2957.506] (==) Log file: "/var/log/Xorg.0.log", Time: Sun Oct 26 01:36:27 2014
    [ 2957.507] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
    [ 2957.507] (==) No Layout section. Using the first Screen section.
    [ 2957.507] (==) No screen section available. Using defaults.
    [ 2957.507] (**) |-->Screen "Default Screen Section" (0)
    [ 2957.507] (**) | |-->Monitor "<default monitor>"
    [ 2957.507] (==) No monitor specified for screen "Default Screen Section".
    Using a default monitor configuration.
    [ 2957.507] (==) Automatically adding devices
    [ 2957.507] (==) Automatically enabling devices
    [ 2957.507] (==) Automatically adding GPU devices
    [ 2957.507] (WW) The directory "/usr/share/fonts/TTF/" does not exist.
    [ 2957.507] Entry deleted from font path.
    [ 2957.507] (WW) The directory "/usr/share/fonts/OTF/" does not exist.
    [ 2957.507] Entry deleted from font path.
    [ 2957.507] (WW) The directory "/usr/share/fonts/Type1/" does not exist.
    [ 2957.507] Entry deleted from font path.
    [ 2957.507] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/100dpi/".
    [ 2957.507] Entry deleted from font path.
    [ 2957.507] (Run 'mkfontdir' on "/usr/share/fonts/100dpi/").
    [ 2957.507] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/75dpi/".
    [ 2957.507] Entry deleted from font path.
    [ 2957.507] (Run 'mkfontdir' on "/usr/share/fonts/75dpi/").
    [ 2957.507] (==) FontPath set to:
    /usr/share/fonts/misc/
    [ 2957.507] (==) ModulePath set to "/usr/lib/xorg/modules"
    [ 2957.507] (II) The server relies on udev to provide the list of input devices.
    If no devices become available, reconfigure udev or disable AutoAddDevices.
    [ 2957.507] (II) Loader magic: 0x818d80
    [ 2957.507] (II) Module ABI versions:
    [ 2957.507] X.Org ANSI C Emulation: 0.4
    [ 2957.507] X.Org Video Driver: 18.0
    [ 2957.507] X.Org XInput driver : 21.0
    [ 2957.507] X.Org Server Extension : 8.0
    [ 2957.509] (II) systemd-logind: took control of session /org/freedesktop/login1/session/c1
    [ 2957.509] (II) xfree86: Adding drm device (/dev/dri/card0)
    [ 2957.510] (II) systemd-logind: got fd for /dev/dri/card0 226:0 fd 8 paused 0
    [ 2957.512] (--) PCI:*(0:0:2:0) 8086:2a02:1028:022f rev 12, Mem @ 0xfea00000/1048576, 0xe0000000/268435456, I/O @ 0x0000eff8/8
    [ 2957.512] (--) PCI: (0:0:2:1) 8086:2a03:1028:022f rev 12, Mem @ 0xfeb00000/1048576
    [ 2957.512] (WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
    [ 2957.512] (II) LoadModule: "glx"
    [ 2957.512] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
    [ 2957.514] (II) Module glx: vendor="X.Org Foundation"
    [ 2957.514] compiled for 1.16.1, module version = 1.0.0
    [ 2957.514] ABI class: X.Org Server Extension, version 8.0
    [ 2957.514] (==) AIGLX enabled
    [ 2957.514] (==) Matched intel as autoconfigured driver 0
    [ 2957.514] (==) Matched intel as autoconfigured driver 1
    [ 2957.514] (==) Matched modesetting as autoconfigured driver 2
    [ 2957.514] (==) Matched fbdev as autoconfigured driver 3
    [ 2957.514] (==) Matched vesa as autoconfigured driver 4
    [ 2957.514] (==) Assigned the driver to the xf86ConfigLayout
    [ 2957.514] (II) LoadModule: "intel"
    [ 2957.514] (II) Loading /usr/lib/xorg/modules/drivers/intel_drv.so
    [ 2957.515] (II) Module intel: vendor="X.Org Foundation"
    [ 2957.515] compiled for 1.16.1, module version = 2.99.916
    [ 2957.515] Module class: X.Org Video Driver
    [ 2957.515] ABI class: X.Org Video Driver, version 18.0
    [ 2957.515] (II) LoadModule: "modesetting"
    [ 2957.515] (WW) Warning, couldn't open module modesetting
    [ 2957.515] (II) UnloadModule: "modesetting"
    [ 2957.515] (II) Unloading modesetting
    [ 2957.515] (EE) Failed to load module "modesetting" (module does not exist, 0)
    [ 2957.515] (II) LoadModule: "fbdev"
    [ 2957.515] (WW) Warning, couldn't open module fbdev
    [ 2957.515] (II) UnloadModule: "fbdev"
    [ 2957.515] (II) Unloading fbdev
    [ 2957.515] (EE) Failed to load module "fbdev" (module does not exist, 0)
    [ 2957.515] (II) LoadModule: "vesa"
    [ 2957.515] (WW) Warning, couldn't open module vesa
    [ 2957.515] (II) UnloadModule: "vesa"
    [ 2957.515] (II) Unloading vesa
    [ 2957.515] (EE) Failed to load module "vesa" (module does not exist, 0)
    [ 2957.515] (II) intel: Driver for Intel(R) Integrated Graphics Chipsets:
    i810, i810-dc100, i810e, i815, i830M, 845G, 854, 852GM/855GM, 865G,
    915G, E7221 (i915), 915GM, 945G, 945GM, 945GME, Pineview GM,
    Pineview G, 965G, G35, 965Q, 946GZ, 965GM, 965GME/GLE, G33, Q35, Q33,
    GM45, 4 Series, G45/G43, Q45/Q43, G41, B43
    [ 2957.516] (II) intel: Driver for Intel(R) HD Graphics: 2000-6000
    [ 2957.516] (II) intel: Driver for Intel(R) Iris(TM) Graphics: 5100, 6100
    [ 2957.516] (II) intel: Driver for Intel(R) Iris(TM) Pro Graphics: 5200, 6200, P6300
    [ 2957.516] (++) using VT number 1
    [ 2957.516] (--) controlling tty is VT number 1, auto-enabling KeepTty
    [ 2957.516] (II) intel(0): Using Kernel Mode Setting driver: i915, version 1.6.0 20140725
    [ 2957.516] (--) intel(0): Integrated Graphics Chipset: Intel(R) 965GM
    [ 2957.517] (--) intel(0): CPU: x86-64, sse2, sse3, ssse3, sse4.1
    [ 2957.517] (II) intel(0): Creating default Display subsection in Screen section
    "Default Screen Section" for depth/fbbpp 24/32
    [ 2957.517] (==) intel(0): Depth 24, (--) framebuffer bpp 32
    [ 2957.517] (==) intel(0): RGB weight 888
    [ 2957.517] (==) intel(0): Default visual is TrueColor
    [ 2957.517] (II) intel(0): Output LVDS1 has no monitor section
    [ 2957.517] (--) intel(0): Found backlight control interface acpi_video0 (type 'firmware') for output LVDS1
    [ 2957.517] (II) intel(0): Enabled output LVDS1
    [ 2957.517] (II) intel(0): Output VGA1 has no monitor section
    [ 2957.517] (II) intel(0): Enabled output VGA1
    [ 2957.517] (II) intel(0): Output HDMI1 has no monitor section
    [ 2957.517] (II) intel(0): Enabled output HDMI1
    [ 2957.517] (II) intel(0): Output TV1 has no monitor section
    [ 2957.517] (II) intel(0): Enabled output TV1
    [ 2957.517] (--) intel(0): Using a maximum size of 256x256 for hardware cursors
    [ 2957.517] (II) intel(0): Output VIRTUAL1 has no monitor section
    [ 2957.517] (II) intel(0): Enabled output VIRTUAL1
    [ 2957.517] (--) intel(0): Output LVDS1 using initial mode 1280x800 on pipe 1
    [ 2957.517] (==) intel(0): TearFree disabled
    [ 2957.517] (==) intel(0): DPI set to (96, 96)
    [ 2957.517] (II) Loading sub module "dri2"
    [ 2957.517] (II) LoadModule: "dri2"
    [ 2957.517] (II) Module "dri2" already built-in
    [ 2957.517] (II) Loading sub module "present"
    [ 2957.517] (II) LoadModule: "present"
    [ 2957.517] (II) Module "present" already built-in
    [ 2957.517] (==) Depth 24 pixmap format is 32 bpp
    [ 2957.518] (II) intel(0): SNA initialized with Broadwater (gen4) backend
    [ 2957.518] (==) intel(0): Backing store enabled
    [ 2957.518] (==) intel(0): Silken mouse enabled
    [ 2957.518] (II) intel(0): HW Cursor enabled
    [ 2957.518] (II) intel(0): RandR 1.2 enabled, ignore the following RandR disabled message.
    [ 2957.518] (==) intel(0): DPMS enabled
    [ 2957.518] (II) intel(0): [XvMC] i965_xvmc driver initialized.
    [ 2957.518] (II) intel(0): [DRI2] Setup complete
    [ 2957.518] (II) intel(0): [DRI2] DRI driver: i965
    [ 2957.518] (II) intel(0): [DRI2] VDPAU driver: i965
    [ 2957.518] (II) intel(0): direct rendering: DRI2 enabled
    [ 2957.518] (II) intel(0): hardware support for Present enabled
    [ 2957.518] (==) intel(0): display hotplug detection enabled
    [ 2957.518] (--) RandR disabled
    [ 2957.569] (II) AIGLX: enabled GLX_MESA_copy_sub_buffer
    [ 2957.569] (II) AIGLX: enabled GLX_ARB_create_context
    [ 2957.569] (II) AIGLX: enabled GLX_ARB_create_context_profile
    [ 2957.569] (II) AIGLX: enabled GLX_EXT_create_context_es2_profile
    [ 2957.569] (II) AIGLX: enabled GLX_INTEL_swap_event
    [ 2957.569] (II) AIGLX: enabled GLX_SGI_swap_control and GLX_MESA_swap_control
    [ 2957.569] (II) AIGLX: enabled GLX_EXT_framebuffer_sRGB
    [ 2957.569] (II) AIGLX: enabled GLX_ARB_fbconfig_float
    [ 2957.569] (II) AIGLX: GLX_EXT_texture_from_pixmap backed by buffer objects
    [ 2957.569] (II) AIGLX: Loaded and initialized i965
    [ 2957.569] (II) GLX: Initialized DRI2 GL provider for screen 0
    [ 2957.576] (II) intel(0): switch to mode [email protected] on LVDS1 using pipe 1, position (0, 0), rotation normal, reflection none
    [ 2957.583] (II) intel(0): Setting screen physical size to 338 x 211
    [ 2957.636] (II) config/udev: Adding input device Video Bus (/dev/input/event12)
    [ 2957.636] (**) Video Bus: Applying InputClass "evdev keyboard catchall"
    [ 2957.636] (II) LoadModule: "evdev"
    [ 2957.636] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
    [ 2957.637] (II) Module evdev: vendor="X.Org Foundation"
    [ 2957.637] compiled for 1.16.0, module version = 2.9.0
    [ 2957.637] Module class: X.Org XInput Driver
    [ 2957.637] ABI class: X.Org XInput driver, version 21.0
    [ 2957.637] (II) systemd-logind: got fd for /dev/input/event12 13:76 fd 15 paused 0
    [ 2957.637] (II) Using input driver 'evdev' for 'Video Bus'
    [ 2957.638] (**) Video Bus: always reports core events
    [ 2957.638] (**) evdev: Video Bus: Device: "/dev/input/event12"
    [ 2957.638] (--) evdev: Video Bus: Vendor 0 Product 0x6
    [ 2957.638] (--) evdev: Video Bus: Found keys
    [ 2957.638] (II) evdev: Video Bus: Configuring as keyboard
    [ 2957.638] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A03:00/LNXVIDEO:00/input/input19/event12"
    [ 2957.638] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 6)
    [ 2957.638] (**) Option "xkb_rules" "evdev"
    [ 2957.638] (**) Option "xkb_model" "pc104"
    [ 2957.638] (**) Option "xkb_layout" "us"
    [ 2957.669] (II) config/udev: Adding input device Power Button (/dev/input/event2)
    [ 2957.670] (**) Power Button: Applying InputClass "evdev keyboard catchall"
    [ 2957.670] (II) systemd-logind: got fd for /dev/input/event2 13:66 fd 16 paused 0
    [ 2957.670] (II) Using input driver 'evdev' for 'Power Button'
    [ 2957.670] (**) Power Button: always reports core events
    [ 2957.670] (**) evdev: Power Button: Device: "/dev/input/event2"
    [ 2957.670] (--) evdev: Power Button: Vendor 0 Product 0x1
    [ 2957.670] (--) evdev: Power Button: Found keys
    [ 2957.670] (II) evdev: Power Button: Configuring as keyboard
    [ 2957.670] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input6/event2"
    [ 2957.670] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 7)
    [ 2957.670] (**) Option "xkb_rules" "evdev"
    [ 2957.670] (**) Option "xkb_model" "pc104"
    [ 2957.670] (**) Option "xkb_layout" "us"
    [ 2957.671] (II) config/udev: Adding input device Lid Switch (/dev/input/event1)
    [ 2957.671] (II) No input driver specified, ignoring this device.
    [ 2957.671] (II) This device may have been added with another device file.
    [ 2957.671] (II) config/udev: Adding input device Sleep Button (/dev/input/event3)
    [ 2957.671] (**) Sleep Button: Applying InputClass "evdev keyboard catchall"
    [ 2957.672] (II) systemd-logind: got fd for /dev/input/event3 13:67 fd 17 paused 0
    [ 2957.672] (II) Using input driver 'evdev' for 'Sleep Button'
    [ 2957.672] (**) Sleep Button: always reports core events
    [ 2957.672] (**) evdev: Sleep Button: Device: "/dev/input/event3"
    [ 2957.672] (--) evdev: Sleep Button: Vendor 0 Product 0x3
    [ 2957.672] (--) evdev: Sleep Button: Found keys
    [ 2957.672] (II) evdev: Sleep Button: Configuring as keyboard
    [ 2957.672] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input7/event3"
    [ 2957.672] (II) XINPUT: Adding extended input device "Sleep Button" (type: KEYBOARD, id 8)
    [ 2957.672] (**) Option "xkb_rules" "evdev"
    [ 2957.672] (**) Option "xkb_model" "pc104"
    [ 2957.672] (**) Option "xkb_layout" "us"
    [ 2957.673] (II) config/udev: Adding input device HDA Digital PCBeep (/dev/input/event6)
    [ 2957.673] (II) No input driver specified, ignoring this device.
    [ 2957.673] (II) This device may have been added with another device file.
    [ 2957.673] (II) config/udev: Adding input device HDA Intel HDMI/DP,pcm=3 (/dev/input/event7)
    [ 2957.673] (II) No input driver specified, ignoring this device.
    [ 2957.673] (II) This device may have been added with another device file.
    [ 2957.673] (II) config/udev: Adding input device HDA Intel Front Headphone Front (/dev/input/event8)
    [ 2957.673] (II) No input driver specified, ignoring this device.
    [ 2957.673] (II) This device may have been added with another device file.
    [ 2957.674] (II) config/udev: Adding input device HDA Intel Front Headphone Surround (/dev/input/event9)
    [ 2957.674] (II) No input driver specified, ignoring this device.
    [ 2957.674] (II) This device may have been added with another device file.
    [ 2957.674] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event0)
    [ 2957.674] (**) AT Translated Set 2 keyboard: Applying InputClass "evdev keyboard catchall"
    [ 2957.675] (II) systemd-logind: got fd for /dev/input/event0 13:64 fd 18 paused 0
    [ 2957.675] (II) Using input driver 'evdev' for 'AT Translated Set 2 keyboard'
    [ 2957.675] (**) AT Translated Set 2 keyboard: always reports core events
    [ 2957.675] (**) evdev: AT Translated Set 2 keyboard: Device: "/dev/input/event0"
    [ 2957.675] (--) evdev: AT Translated Set 2 keyboard: Vendor 0x1 Product 0x1
    [ 2957.675] (--) evdev: AT Translated Set 2 keyboard: Found keys
    [ 2957.675] (II) evdev: AT Translated Set 2 keyboard: Configuring as keyboard
    [ 2957.675] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio0/input/input0/event0"
    [ 2957.675] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD, id 9)
    [ 2957.675] (**) Option "xkb_rules" "evdev"
    [ 2957.675] (**) Option "xkb_model" "pc104"
    [ 2957.675] (**) Option "xkb_layout" "us"
    [ 2957.675] (II) config/udev: Adding input device AlpsPS/2 ALPS GlidePoint (/dev/input/event11)
    [ 2957.675] (**) AlpsPS/2 ALPS GlidePoint: Applying InputClass "evdev touchpad catchall"
    [ 2957.675] (**) AlpsPS/2 ALPS GlidePoint: Applying InputClass "touchpad catchall"
    [ 2957.675] (**) AlpsPS/2 ALPS GlidePoint: Applying InputClass "Default clickpad buttons"
    [ 2957.675] (II) LoadModule: "synaptics"
    [ 2957.676] (II) Loading /usr/lib/xorg/modules/input/synaptics_drv.so
    [ 2957.676] (II) Module synaptics: vendor="X.Org Foundation"
    [ 2957.676] compiled for 1.16.0, module version = 1.8.1
    [ 2957.676] Module class: X.Org XInput Driver
    [ 2957.676] ABI class: X.Org XInput driver, version 21.0
    [ 2957.676] (II) systemd-logind: got fd for /dev/input/event11 13:75 fd 19 paused 0
    [ 2957.676] (II) Using input driver 'synaptics' for 'AlpsPS/2 ALPS GlidePoint'
    [ 2957.676] (**) AlpsPS/2 ALPS GlidePoint: always reports core events
    [ 2957.676] (**) Option "Device" "/dev/input/event11"
    [ 2957.710] (--) synaptics: AlpsPS/2 ALPS GlidePoint: x-axis range 0 - 1023 (res 0)
    [ 2957.710] (--) synaptics: AlpsPS/2 ALPS GlidePoint: y-axis range 0 - 767 (res 0)
    [ 2957.710] (--) synaptics: AlpsPS/2 ALPS GlidePoint: pressure range 0 - 127
    [ 2957.710] (II) synaptics: AlpsPS/2 ALPS GlidePoint: device does not report finger width.
    [ 2957.710] (--) synaptics: AlpsPS/2 ALPS GlidePoint: buttons: left right middle
    [ 2957.710] (--) synaptics: AlpsPS/2 ALPS GlidePoint: Vendor 0x2 Product 0x8
    [ 2957.710] (--) synaptics: AlpsPS/2 ALPS GlidePoint: invalid finger width range. defaulting to 0 - 15
    [ 2957.710] (**) Option "TapButton1" "1"
    [ 2957.710] (**) Option "TapButton2" "2"
    [ 2957.710] (**) Option "TapButton3" "3"
    [ 2957.710] (--) synaptics: AlpsPS/2 ALPS GlidePoint: touchpad found
    [ 2957.710] (**) AlpsPS/2 ALPS GlidePoint: always reports core events
    [ 2957.710] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio2/input/input10/event11"
    [ 2957.710] (II) XINPUT: Adding extended input device "AlpsPS/2 ALPS GlidePoint" (type: TOUCHPAD, id 10)
    [ 2957.710] (**) synaptics: AlpsPS/2 ALPS GlidePoint: (accel) MinSpeed is now constant deceleration 2.5
    [ 2957.710] (**) synaptics: AlpsPS/2 ALPS GlidePoint: (accel) MaxSpeed is now 1.75
    [ 2957.710] (**) synaptics: AlpsPS/2 ALPS GlidePoint: (accel) AccelFactor is now 0.156
    [ 2957.710] (**) AlpsPS/2 ALPS GlidePoint: (accel) keeping acceleration scheme 1
    [ 2957.710] (**) AlpsPS/2 ALPS GlidePoint: (accel) acceleration profile 1
    [ 2957.710] (**) AlpsPS/2 ALPS GlidePoint: (accel) acceleration factor: 2.000
    [ 2957.710] (**) AlpsPS/2 ALPS GlidePoint: (accel) acceleration threshold: 4
    [ 2957.710] (--) synaptics: AlpsPS/2 ALPS GlidePoint: touchpad found
    [ 2957.711] (II) config/udev: Adding input device AlpsPS/2 ALPS GlidePoint (/dev/input/mouse1)
    [ 2957.711] (**) AlpsPS/2 ALPS GlidePoint: Ignoring device from InputClass "touchpad ignore duplicates"
    [ 2957.711] (II) config/udev: Adding input device ALPS PS/2 Device (/dev/input/event10)
    [ 2957.711] (**) ALPS PS/2 Device: Applying InputClass "evdev pointer catchall"
    [ 2957.712] (II) systemd-logind: got fd for /dev/input/event10 13:74 fd 20 paused 0
    [ 2957.712] (II) Using input driver 'evdev' for 'ALPS PS/2 Device'
    [ 2957.712] (**) ALPS PS/2 Device: always reports core events
    [ 2957.712] (**) evdev: ALPS PS/2 Device: Device: "/dev/input/event10"
    [ 2957.712] (--) evdev: ALPS PS/2 Device: Vendor 0x2 Product 0x8
    [ 2957.712] (--) evdev: ALPS PS/2 Device: Found 3 mouse buttons
    [ 2957.712] (--) evdev: ALPS PS/2 Device: Found relative axes
    [ 2957.712] (--) evdev: ALPS PS/2 Device: Found x and y relative axes
    [ 2957.712] (II) evdev: ALPS PS/2 Device: Configuring as mouse
    [ 2957.712] (**) evdev: ALPS PS/2 Device: YAxisMapping: buttons 4 and 5
    [ 2957.712] (**) evdev: ALPS PS/2 Device: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
    [ 2957.712] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio2/input/input12/event10"
    [ 2957.712] (II) XINPUT: Adding extended input device "ALPS PS/2 Device" (type: MOUSE, id 11)
    [ 2957.712] (II) evdev: ALPS PS/2 Device: initialized for relative axes.
    [ 2957.712] (**) ALPS PS/2 Device: (accel) keeping acceleration scheme 1
    [ 2957.712] (**) ALPS PS/2 Device: (accel) acceleration profile 0
    [ 2957.712] (**) ALPS PS/2 Device: (accel) acceleration factor: 2.000
    [ 2957.712] (**) ALPS PS/2 Device: (accel) acceleration threshold: 4
    [ 2957.713] (II) config/udev: Adding input device ALPS PS/2 Device (/dev/input/mouse0)
    [ 2957.713] (II) No input driver specified, ignoring this device.
    [ 2957.713] (II) This device may have been added with another device file.
    [ 2957.713] (II) config/udev: Adding input device PC Speaker (/dev/input/event4)
    [ 2957.713] (II) No input driver specified, ignoring this device.
    [ 2957.713] (II) This device may have been added with another device file.
    [ 2957.714] (II) config/udev: Adding input device Dell WMI hotkeys (/dev/input/event5)
    [ 2957.714] (**) Dell WMI hotkeys: Applying InputClass "evdev keyboard catchall"
    [ 2957.714] (II) systemd-logind: got fd for /dev/input/event5 13:69 fd 21 paused 0
    [ 2957.714] (II) Using input driver 'evdev' for 'Dell WMI hotkeys'
    [ 2957.714] (**) Dell WMI hotkeys: always reports core events
    [ 2957.714] (**) evdev: Dell WMI hotkeys: Device: "/dev/input/event5"
    [ 2957.714] (--) evdev: Dell WMI hotkeys: Vendor 0 Product 0
    [ 2957.714] (--) evdev: Dell WMI hotkeys: Found keys
    [ 2957.714] (II) evdev: Dell WMI hotkeys: Configuring as keyboard
    [ 2957.714] (**) Option "config_info" "udev:/sys/devices/virtual/input/input11/event5"
    [ 2957.714] (II) XINPUT: Adding extended input device "Dell WMI hotkeys" (type: KEYBOARD, id 12)
    [ 2957.714] (**) Option "xkb_rules" "evdev"
    [ 2957.714] (**) Option "xkb_model" "pc104"
    [ 2957.714] (**) Option "xkb_layout" "us"
    [ 2963.887] (II) evdev: Dell WMI hotkeys: Close
    [ 2963.887] (II) UnloadModule: "evdev"
    [ 2963.887] (II) systemd-logind: releasing fd for 13:69
    [ 2963.949] (II) evdev: ALPS PS/2 Device: Close
    [ 2963.950] (II) UnloadModule: "evdev"
    [ 2963.950] (II) systemd-logind: releasing fd for 13:74
    [ 2964.016] (II) UnloadModule: "synaptics"
    [ 2964.016] (II) systemd-logind: releasing fd for 13:75
    [ 2964.069] (II) evdev: AT Translated Set 2 keyboard: Close
    [ 2964.070] (II) UnloadModule: "evdev"
    [ 2964.070] (II) systemd-logind: releasing fd for 13:64
    [ 2964.123] (II) evdev: Sleep Button: Close
    [ 2964.123] (II) UnloadModule: "evdev"
    [ 2964.123] (II) systemd-logind: releasing fd for 13:67
    [ 2964.156] (II) evdev: Power Button: Close
    [ 2964.156] (II) UnloadModule: "evdev"
    [ 2964.156] (II) systemd-logind: releasing fd for 13:66
    [ 2964.183] (II) evdev: Video Bus: Close
    [ 2964.183] (II) UnloadModule: "evdev"
    [ 2964.183] (II) systemd-logind: releasing fd for 13:76
    [ 2964.271] (EE) Server terminated successfully (0). Closing log file.

Maybe you are looking for