Red Raw Source Settings - multiple settings for one long clip?

Hello everyone,
I have a timeline with red raw material from Red Scarlet 4K. My DOP wants to make some adjustments in the source settings before Grading. I have some long merged clips (with a lot of changes in light etc.) and I have let`s say two different parts of one of the long clips in the timeline, so I tried to make some changes in the source settings for those two clips in the timeline, but the source settings change the master clip and not only the edited clips in the timeline. Is there a way to make adjustments in the source settings separately for every clip in the timeline?
after I open the source settings it won`t show me the part of the clip which I have in the timeline, but the whole clip from the beginning, so I have to search manually where my clip in the timeline begins, so I know how to adjust it. Is there a way that the source settings show me only the part of the clip (or at least an in and out point) I have in the timeline?

In my experience, each .RDC container can only have a single RMD (settings) file associated with it.
To create multiple settings for the same clip, you would have to duplicate the .RDC folder and its contents for each new setting required.
You would then have to replace each use of that file within your sequence, for each new setting required,
i.e. 3 settings would require original plus 2 duplicate .RDC folders, then you'd have to replace each occurrence of that clip with 1 of 3 files that has the proper new setting.
Now, of course, if you're not grading in PrP, I can't say how the color correction software would know which duplicated files or settings to link to.
No, there is currently no way to open the Settings dialog for a .R3D file and have it match frame to a clip in the sequence. Perhaps you could submit a feature request for that option.
Adobe - Feature Request/Bug Report Form

Similar Messages

Can you copy and paste camera raw filter settings for video?

I have just learned how to use the camera raw filter for color correcting my video clips. Is there a way to copy the settings for one clip and apply it to another? How do you do this?

If you give complete and detailed information about your setup and the issue at hand, such as your platform (Mac or Win), exact versions of your OS, of Photoshop and of Bridge, machine specs, what troubleshooting steps you have taken so far, what error message(s) you receive, if having issues opening raw files also the exact camera make and model that generated them, etc., someone may be able to help you.
Please read this FAQ for advice on how to ask your questions correctly for quicker and better answers:
http://forums.adobe.com/thread/419981?tstart=0
Thanks!

Multiple Vendors for one Document Number in BW

Hello All,
We are getting Multiple Vendors for one document in BW. In R/3, standard table and RSA3, we are able to see correct vendor where as when it is coming into BW it is showing incorrect vendor in PSA and Data Target.
All issues are coming for Process Key 1 only.
*For Example:*
Document: 9400000007
Schedule Line:1
Doc Item: 1
Vendor:
0010019229 - Incorrect Vendor
0010018962 - Correct Vendor
Committed Quantity: 0
Doc Type:
ZNB
ZNPP
Process Key: 1
Not sure how to upload screen shot.
Please suggest.
Thanks,
Vijay

Hi ,
Are you loading for the first time ? If yes have you checked Transaction BF11 settings.
Regards
Rahul Bindroo

Multiple listings for one shared user

Occassionally, a single user in my office will show up under the Shared Music heading in the iTunes source list multiple times! One coworker's shared library currently shows up 6 times, one after the other!
Only the last listing actually connects to her library, the preceeding 5 listings all return the error: "The shared music library is not accessible for an unknown reason. (-3259). Check that any firewall software running on either the shared computer or this computer has been set to allow communication on port 3689."
I know this isn't the problem though.
Other users on our network have had similar problems but the 6 listings is the worst to date. We are all on OSX 10.3.9 using iTunes 6.0.4 (3) however, this problem has been happening since iTunes 5. Anyone have any solutions on how to get back down to a single listing?
G5 Dual 1.8GHz Mac OS X (10.3.9) iTunes 6.0.4

Create a playlist
Put all affected tracks into it
Select all tracks on that list
Press Apple-I on your keyboard
Enter the correct name as "Artist"
Press 'OK'

Can you have multiple users for one account?

Can you have multiple users for one account? if so how do you set it up.
We are using it for our department and it would be great to see who created what form instead of it being all one name.

Each person should have their own account. You can easily share the forms with other people in your department. You will be able to see who the author of the form is.
More information on how to share :
http://forums.adobe.com/docs/DOC-2462
Information on how to copy a forms to a different account :
http://forums.adobe.com/docs/DOC-1390
Hope this helps
Gen

How do i scan multiple pages for one attachment

I know how to scan but I don't know how to scan multiple pages for one attachement....Help please

Hi dagda24,
You can scan multiple pages into a single document with the scan to PDF option. Use the following steps to do so:
1. Open MP Navigator.
2. Click One Clcik.
3. Click Save to PC.
4. Change the File Type from PDF to PDF (multiple pages).
5. Make any other changes as needed, then click scan.
Did this answer your question? Please click the Accept as Solution button so that others may find the answer as well.

How to open multiple sessions for one user?

Sorry for the silly question but I couldn't find it googling or searching through this forum, so I started wondering whether it's possible in SQL Developer to open multiple sessions for one user. I'm fairly new to SQL Developer and databases in general.
When I open SQL Developer and connect to a schema, a worksheet opens named MYSCHEMA. If I disconnect then connect, another worksheet opens, named MYSCHEMA~1. I assumed these were different sessions, but if I enter into one worksheet:
select col1 from my_table where row_id = 1
-- shows result is 1
update my_table set col1 = 0 where row_id = 1
select col1 from my_table where row_id = 1
-- shows result is 0and then enter into the second worksheet:
select col1 from my_table where row_id = 1
-- shows result is 0I would have expected the second worksheet to report 1 because the first worksheet did not issue a COMMIT. Thus, I'd guess both worksheets are the same session? Is that right? If so, how do I have two sessions open simultaneously (opened by same user)?
I'm trying to implement the code at the bottom of this post, for which testing requires at least two sessions:
Re: Help with Procedure
Edited by: tem on Apr 18, 2012 6:44 AM

Thanks Jim,
Ctrl-Shift-N doesn't do anything for me. I'm on a mac -- by experimenting it looks like command-N does what you're looking for. This appears to be the same as left-clicking on the "New" icon in the top left corner of SQL Developer, or selecting from the pull-down menu, File > New.
This opens "Create a New" window that appears to be a wizard. What would I select at this point? Options are: Database Connection, Table, View, Package, ...
I don't see an option for "Worksheet".
UPDATE:
OK, I found that if I select "SQL File", a worksheet becomes available. Perhaps this is what you intended. However, when I issue the command
select col1 from my_table where row_id = 1;it still returns 0 instead of 1. Hmm, maybe my initial assumption was wrong -- if this is a second (e.g. different) session, should I expect the changes made in the first session in SQL Developer (the UPDATE command) WITHOUT a commit, to be observed in this second session? I thought that changes made in one session were not viewable in a different session until these changes are committed in the first session? If so, how to show this in SQL Developer? I must be missing something basic here.
Or, is SQL Developer issuing some sort of "auto-commit" without my knowledge?
Edited by: tem on Apr 18, 2012 8:00 AM

Multiple Values For one Condition in Choose From List

I have used one Business Partner Choose From List in my form but i want to give condition in that choose from list on GroupCode .But the condition will have multiple values like 100,102,104 then how i will write the code to incorporate multiple values for one single condition.

Hi,
Check this thread
How to set a Multiple condition in a single CFL
Hope that helps,
Vasu Natari.

Multiple Labels for One Order

Can anybody tell me if it is possible to produce multiple labels for one order. For example a customer orders 4 units. A standard package holds 3 units so an additional package is required for the fourth unit. As a result two packing labels are required. Does OM 11i support this?

Hi Aj
Thanks for your quick response. I was think on the same lines and you have confirmed that we will have to split the line into several lines on sales order.
I am trying to do that now in our ECC box i.e item 10 with payer 1 and item 2 with payer 2. But as soon as I try to change the payer on item 2, i get the following error message which relates to credit management being active.
I am assuming once we decativate CM, we should be good to go. PLease confirm. Also once its time for billing, will SAP automatically split the billing into different invoices per sales order line item based upon number of payers on the line items?
PLease confirm your thoughts.
Regards
Jai

Multiple currency for one vendor

Hi,
Is there any way to have multiple currency for one Vendor?

Hi Siva,
Yes, It is possible to maintain multiple currency for one vendor. How ? The procedure as follows.
During vendor creation using T-code XK01 and currency enter input data screen select Extra option on the top of the screen click and display 'Add Purchasing Data' option click opened new screen and give input data plant, tick mark of the option Data retent.at plant level allowed and tick for OK.
After that, you have enter multiple currency for the same vendor during vendor creation time, then you will create PO using T-code ME21N the currency field you have fill as you required currency by default first currency of vendor created will be display.
Hope, it is useful for you.
Regards,
K.Rajendran

Multiple choose for one parameter

Hi, does Oracle Report support the multiple choose for one parameter? i used a IN statement inside my WHERE conditions as following
Select ....
where ....
content.style IN (:p_style)
(content.style is a column in table "content", and "p_style" is a bind variable)
i want user can have multiple choises on p_style value. but in the parameter form i only can make one choise. Does any one know how to do the multi choise from parameter form? if you do, please help me. Thank you very much.
Li

<BLOCKQUOTE><font size="1" face="Verdana, Arial">quote:</font><HR>Originally posted by whl:
Hi, does Oracle Report support the multiple choose for one parameter? i used a IN statement inside my WHERE conditions as following
Select ....
where ....
content.style IN (:p_style)
(content.style is a column in table "content", and "p_style" is a bind variable)
i want user can have multiple choises on p_style value. but in the parameter form i only can make one choise. Does any one know how to do the multi choise from parameter form? if you do, please help me. Thank you very much.
Li<HR></BLOCKQUOTE>
you can do that by flowing the stap
at first you will write a select statement
select ...
From ...
where Style (colomn name) = &style1
then you create a user parameter soupose wich name is P_style and which valus is x, y, and z you should enter another value soupose that name is 'All' (All means x + y + Z)
then you write in after parameter form trigger...
IF :P_style = 'All' then
:style1 := null;
Else :style1 := 'and style (style means your column name) = :P_style;
end if;
null

Multiple payers for one sold to party

Hi All,
Can we have multiple payers for one sold to party?
Thanks

Hi
Yes, you can have multiple PAYER for one Sold-to-party (only in the Customer master).
This Partner relationship is maintained in two places. They are,
> Customer master ( sales area data > partner function tab )
> Sales documents (at Header level and Item level)
In Customer master data, you can have multiple partners ( e.g, multiple Payers) for one Partner function( e.g, SH,BP,PY).
But in Sales document, you can have only one Partner for one Partner function.
So, you can have only in Customer master data multiple pertners. So, first create the different Payers through XD01 ,choosing Account group "Payer".
Then assign all those PAYERS in the master data of the Sold-to-party by going in the change mode XD02 and save it.
When you create the Billing document, system will give a pop-up of those list of Payers and you have to choose one . You can have only one Payer in one Billing document.

Lightroom 5 slowdown, my post processing times have tripled and the develop tasks take multiple seconds for one adjustment, Please Help. . . .

my post processing times have tripeled and the develop tasks take multiple seconds for one adjustment, Please Help. . . .

my post processing times have tripeled and the develop tasks take multiple seconds for one adjustment, Please Help. . . .

On my contact list I have multiple names for one person

On my contact list I have multiple names for one person.

The Account Owner can see the call/text logs for all lines on the account, but each line needs its own My Verizon account for messaging and backups. Those lines will be listed as Account Members and will have limited info. available to them regarding the account.

A series of video files (0001.MTS to 0005.MTS) were imported into premiere, when moved to timeline premiere combined them and made them look like one long clip nmed 0001.MTS. Multiple motion edits and opacity edits were made. When project manager moved th

A series of video files (0001.MTS to 0005.MTS) were imported into premiere, when moved to timeline premiere combined them and made them look like one long clip named 0001.MTS. Multiple motion edits and opacity edits were made. When project manager moved the project, the actual video content of 0002.MTS to 0005.MTS was missing(source clips are still there but they were playing and working as part of that 0001.MTS timeline clip before). Those parts of the 0001.MTS clip in the timeline were Danger Striped and can be relinked but now have no edits anymore. The edits are apparently only linked with the original 0001.MTS source clip but extend beyond the actual range of the actual source clip. At the time I thought it was weird that premiere displayed the whole string of clips as one (with one name and no breaks) but it all works in the original project file but cannot be transferred to another location without multiple clips showing Danger Stripes.I need to move it and preserve the dozens of motion and opacity edits linked to the apparently oversized timeline clip. HELP!! any ideas?
I did not nest any clips or sequences, premiere just seemed to combine the clips under one name when I moved them to timeline.
I am using CS5.

A series of video files (0001.MTS to 0005.MTS) were imported into premiere, when moved to timeline premiere combined them and made them look like one long clip named 0001.MTS. Multiple motion edits and opacity edits were made. When project manager moved the project, the actual video content of 0002.MTS to 0005.MTS was missing(source clips are still there but they were playing and working as part of that 0001.MTS timeline clip before). Those parts of the 0001.MTS clip in the timeline were Danger Striped and can be relinked but now have no edits anymore. The edits are apparently only linked with the original 0001.MTS source clip but extend beyond the actual range of the actual source clip. At the time I thought it was weird that premiere displayed the whole string of clips as one (with one name and no breaks) but it all works in the original project file but cannot be transferred to another location without multiple clips showing Danger Stripes.I need to move it and preserve the dozens of motion and opacity edits linked to the apparently oversized timeline clip. HELP!! any ideas?
I did not nest any clips or sequences, premiere just seemed to combine the clips under one name when I moved them to timeline.
I am using CS5.

Red Raw Source Settings - multiple settings for one long clip?

Similar Messages

Maybe you are looking for