Red record button isn't active in transport controls in capture window

My camera is connected to my PC via firewire cable.  When I open the capture window in Premiere, and I hit play on my camera, I don't see video in Premiere's capture window and the red record button is inactive so I can't capture.  Yet when I connect or disconnect the firewire cable, I get the audio indication of each action from my computer.  This is the first time I've seen this happen.  Any ideas?
Also, I just noticed, and this would be expected, at the top of the capture window it reads, "capture device offline" and yet the controls that are active (RW, step back, play, step forward, FF, pause, stop) all work and control my camera

I figured it out.  For some reason my capture format was set to HDV instead of DV.

Similar Messages

  • Red record button and play arrow not working for videos. Any way to make work again?

    Red record button and play arrow quit working. Any way to fix?

    Try this and see if it works for you. Close the Camera App in the recents tray and reboot the iPad.
    Tap the home button once, then double tap the home button and the recents tray will appear with all of your recent apps displayed at the bottom. Tap and hold down on any app icon until it begins to wiggle. Tap the minus sign in the upper left corner of the camera app.  Tap the home button again.
    Reboot the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider if it appears on the screen - let go of the buttons. Let the iPad start up.

  • HT4527 got to the end of these instructions but the import button isn't active. I can see my whole library though. what now?

    Got to the end of these instructions for transferring library to new computer. Can see my library via home sharing but the import button is not active. How do I continue?

    I'm sorry to be so incredibly dense. The article to which you linked says:
    "If the computer is already authorized, the item plays. If the computer has not yet been authorized, iTunes asks you to enter the Apple ID and password you used to purchase the song."
    I can play songs from my husband's library. I can't drag them into my library.
    If deauthorizing/authorizing is the solution, who needs to do what? We've got three computers and two iTunes accounts.

  • "Copy To" Button isn not active in A/R Invoice + Payment form

    I want to create A/R Credit Memo from the A/R Invoice + Payment form but the "Copy To" button is not active. Kindly help me.
    Regards
    Farhan

    Hi Farhan,
    the invoice is closed because it had been paid completely, therefore there is no follow-on transaction.
    In version 2007 you can cancel the payment. This will re-open the invoice & you may then use that as a base document for the cerdit note.
    All the best,
    Kerstin

  • Newsstand store button isn't active?

    Iphone 4 with iOS 5.0.1.  I can't understand why it isn't working and wanted to check it out.  Right now its annoying because it seems to be a pointless empty folder I can't delete and won't link to store.  Can anyone help with this?

    I figured it out.  For some reason my capture format was set to HDV instead of DV.

  • Record button not working on Online Sky Guide

    Not working for this page for example: http://tv.sky.com/tv-guide#/programme/detail/1813/922

    It is not working for me either, I also tried some other programs via the online TV Guide and the Record Button isn't appearing...

  • Record Button greyed out

    I Have just recieved a new HP computer with the complete CS5 package. Have hooked up the audio leads through Black Magic Intensity Pro but when I go to record the audio from my tape deck into one channel  - I go to the record button at the bottom of screen , then a smaller window opens up again with record button , stop & play buttons along bottom of smaller screen. These are greyed out. At the top it says INPUT - Black magic audio - Settings. Nothing happens when you click on settings though.  Any ideas out there. Maybe I have to arm a track. Can't see where you do that though.

    Do you have the Black Magic selected as default input device in your System sounds? For some reason HPs are quirky about that. My dad's refuses to set his headset mic as a default device for skype, yet it WILL set the headset speakers as soon as he plugs them in.

  • 5.1.1 Chapter 4 Step 3 to 4: Record Button turn WHITE when Parameters are RED

    This is an odd behavoir and is the opposite of the way it should be.
    In the Apple Pro Training Series "Motion 5" book, Chapter 4, Step 3 to 4, when the Record Button is Red the Keyframeable parameters are White, and, when the the Record Button is WHITE the Keyframeable parameters are RED. This is just the opposite of what it should be.
    With the Keyframeable Parameters white it looks like this:
    When the Record Button is clicked on and activated, the KeyFrameable Parameters are Red (which is what I want) but the button turns white.
    Why should this be?

    Thanks for trying to help out. I read your reply all the while still thinking about what was written in the book, and what you said makes sense. But, I'm having some difficulty trying to understand what the book is saying now. I had thought that in Step 3, when the Command-Z is pressed to undo the rotation that it would undo the change. In fact, the Properties Inspector numbers were white but the Record Button was red - just the button, not the area in the button square surrounding the button. Elsewhere/somewhere, I saw that the entire square around the button would turn red.
    Since there has been an update to "5" since the book was written one thought was the red square was changed to turn red.
    Anyway, I can't do anymore on this for the time being as there are other thing I have to work on so I'll have to revisit this later. I hate doing any steps beyond what I know is "perfect" because I don't want to get off course with the book. There are a few other things in my life besides studying the Motion 5 book. Not a whole lot, but enough.
    Side note: After my original post I discovered a few things to edit but couldn't get the site to allow me to edit. For one thing, it isn't "Chapter 4", for anyone reading the book it's "LESSON 4". Don't want to confuse anyone who comes by later.

  • When I try to convert my .pdf to Word, I get a sidebar that has fields for: the name of my pdf file, the type of file I want to convert to (In my case, Word), and a button that says "Convert".  My problem is that the "convert to" field isn't active.  I ca

    When I try to convert my .pdf to Word, I get a sidebar that has fields for: the name of my pdf file, the type of file I want to convert to (In my case, Word), and a button that says "Convert".  My problem is that the "convert to" field isn't active.  I can see the words "Microsoft Word" in pale gray, but when I click on the field, nothing happens.

    You have posted in the wrong forum.  Try posting in the forum for the product you are trying to use.
    Here is a link to a page that has links to all Adobe forums... use the drop down list to see all.
    Forum links page:
    https://forums.adobe.com/welcome

  • My home button just stopped working, the white mark isn't red so it isn't water damaged. could i replace the phone for free? i just got this phone a week ago

    my home button just stopped working, the white mark isn't red so it isn't water damaged. i did get it wet but i put it in rice as soon as i could and dryed it off as much as i could but it still hasn't turned red and the button still isnt working. could i replace the phone for free? i just got this phone a week ago

    No water damage will show up to Apple you have voided any warranty you may have

  • QuickTime X - can't see recording button anywhere

    I'm trying to do a new screen recording but can't see the record button anywhere on my screen, how do I get it to show?  I'm on 10.6.8 and everything is up to date.

    There is no such option since the disappearance of Leopard. Reinstalling OS X will not bring back iMovie since it isn't part of OS X and never has been. It's part of iLife which should be available to you through the App Store.
    To erase and install properly you need to do the following:
    Install OS X Using Internet Recovery
    Be sure you backup your files to an external drive or second internal drive because the following procedure will remove everything from the hard drive.
    Boot to the Internet Recovery HD:
    Restart the computer and after the chime press and hold down the COMMAND-OPTION- R keys until a globe appears on the screen. Wait patiently - 15-20 minutes - until the Recovery main menu appears.
    Erase the hard drive:
    Select Disk Utility from the main menu and click on the Continue button.
    After DU loads select your newly installed hard drive (this is the entry with the mfgr.'s ID and size) from the left side list. Click on the Erase tab in the DU main window.
    Set the format type to Mac OS Extended (Journaled.) Click on the Erase button and wait until the process has completed. Quit DU and return to the main menu.
    Reinstall OS X: Select Reinstall OS X and click on the Install button. Be sure to select the correct drive to use if you have more than one.
    Note: You will need an active Internet connection. I suggest using Ethernet if possible because it is three times faster than wireless.
    This should restore the version of OS X originally pre-installed on the computer.

  • Logic 8 freezes when clicking on the recording button (audio)

    I am a newbie, switched recently.
    When I click on the record button, Logic 8 pauses for more than a minute before starting audio recording normally. The external hard drive where my project files are saved becomes "very active" during the pause and then works normally when audio recording starts.
    Thsi happens only on the files I imported from the OMF and Midi files created on my previous DAW (Sonar6).
    I tried to record audio in a blank project: no problem at all.
    This is not a problem of the external drive spinning off when not used because Logic freezes everytime I click on the record button even if I do it immediately after a previous (very short) recording test so the hard drive does not have to spin back on. Tried on my 3 external drives (2 USB, 1 firewire) same problem.
    All my external drives are also used with Windows so they
    have the Fat32 format.
    Copied a project file to my MacBook desktop: no recording freeze problem!
    Might be linked: I am a bit surprised with the project file sizes: 500 to 600 MB each file created from OMF and Midi Sonar exports! (average 5 audio tracks, 5 instrument tracks, I use Stylus RMX for drums).
    They were much much smaller on my PC as Cakewalk Sonar files. Are these normal project files sizes with Logic?
    Thanks for your help
    Bluescat
    MacBook 2.2 Ghz
    Leopard
    Logic Pro 8
    Edirol UM 880
    Line 6 Toneport UX2
    http://www.myspace.com/chrisbluescat

    When I click on the record button, Logic 8 pauses for more than a minute before starting audio recording normally. The external hard drive where my project files are saved becomes "very active" during the pause and then works normally when audio recording starts.
    At a guess I'd say - is your external drive Mac-formatted or PC formatted? Seeing as you were using Sonar, you've obviously come from the PC. You should not use FAT drives, you should format them to the native Mac format.
    All my external drives are also used with Windows so they have the Fat32 format.
    Ah. There you go.
    See:
    http://discussions.apple.com/thread.jspa?messageID=7290767
    500 to 600 MB each file. Are these normal project files sizes with Logic?
    "Normal" is entirely relative. Some people's projects are much smaller. Some are much larger.

  • I get "an error has occured" when trying to download from the AppStore.  I can not re-download as the button is not active.

    I encountered the response "an error has occured" when I downloaded Maverick X from the App Store.  I can not try to re-download as the download button is not active.  I have tried rebooting and to get the download from apple.com but it keeps redirecting to the App Store.
    Suggestions?

    Launch the Console application in any of the following ways:
    ☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
    ☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
    ☞ Open LaunchPad. Click Utilities, then Console in the icon grid.
    Make sure the title of the Console window is All Messages. If it isn't, select All Messages from the SYSTEM LOG QUERIES menu on the left. If you don't see that menu, select
    View ▹ Show Log List
    from the menu bar.
    Click the Clear Display icon in the toolbar. Then try the action that you're having trouble with again. Select any messages that appear in the Console window. Copy them to the Clipboard by pressing the key combination command-C. Paste into a reply to this message (command-V).
    When posting a log extract, be selective. In most cases, a few dozen lines are more than enough.
    Please do not indiscriminately dump thousands of lines from the log into this discussion.
    Important: Some private information, such as your name, may appear in the log. Anonymize before posting.

  • How do I get Firefox's "red plugin button" to appear?

    I am using Windows XP with Firefox 20.
    The Mozilla support pages say to click the red plugin button to change plugin settings.
    I have never seen this button appear on Firefox!
    When I try to follow Mozilla support instructions, I have to keep opening up more and more windows.
    This is so confusing that I don't want to make changes that might make things worse.
    Isn't there a simple way to make this magic red plugin button to be on my address bar?

    Mozilla support says to click on the red plugin icon on address bar to allow Java. It does not appear on any site I go to. Just as the person originally asking question said : "No, there is just the big arrow & a gra(e)yed out "this website does not supply identity information." I really have only seen that reg plugin button except for on the mozilla support page. It has never appeared when I have been @ relatives' or friends' houses. "

  • EXECUTE IMPORT button is not activated.

    Hi Experts,
    I am importing some records to MDM using MDM-Import Manager ...
    i have done the Field Mapping then Value Mapping and Match Record Strategy...
    here in the Status i even see that 20 out of 20 Fields are Mapped and 20 out of 20 Values are Mapped.
    but the EXECUTE IMPORT button is not activated ..... Please help .. ....
    i am using Execl file for doing it .. as a Source ....
    regards,
    Jay Sawant.

    Hi Jay,
    Just try removing the matching field or field combinations as you have used and Select them again.
    Sometime resetting the matching field tab the import action is enabled.
    Also check if you have selected the correct Import action like Create for new records and Update or Replace for existing records.
    Check on these two areas matching field and import action.
    Hope It Helped
    Thanks & Regards
    Simona Pinto

Maybe you are looking for