Red rendering line in timeline turns green after rendering but then reappears.

I''m a new user of Premiere Elements 10 and relatively new to video editing.  My system info is: 2010 Mac Pro quadcore 2.66 Ghz with 12 Gigs of memory, NVIDIA GeForce GT120 512Mb running Lion 10.7.3.  The red rendering line in my project turns green, as expected, after rendering but then reappears red after I close the project and reopen it.  The project is saved regularly after rendering and everything works normally.  No changes are made to any clips and as I stated the render line is green when the project is saved and closed.  Any ideas what I might be doing wrong.  Thanks in advance. 

Thank you for that information. It kills about all of my theories.
Something is keeping PrE from seeing the links that it created to the Render Files, so PrE cannot find them - the link is dead.
I know so very little about Mac's, that I cannot even imagine where to begin. Maybe a Mac-user will drop by, and have an idea, and then we both will learn something.
Wish that I had more to offer, but good luck,
Hunt

Similar Messages

  • My iphone turns green after a minute then turns off

    my iphone turns green after a minute then turns off.
    does anyone know what this is and how to fix it?

    oh and also after i turn it off for like six hours it stops for 5 hours and then its back

  • Red vertical lines at timeline while rendering+saving

    Sometimes I get red vertical lines at timeline while rendering+saving my projects. What do they mean?

    System ==> Mac mini (late 2009), CPU: 2.26GHz Intel Core 2 Duo, RAM: 2GB 1066MHz DDR3, OS: Mac OS X Version 10.6.5. Adobe products ==> Adobe Photoshop Elements 9 & Adobe Premiere Elements 9 (including Adobe Elements 9 Organizer)
    Please notice that the the red vertical lines appear only in the TIMELINE and not to the video (rendered and/or exported) itself! I would guess that it has to do with the quality of the video, or with the fact that it is not rendered and these are the "difficult" pieces of the video, but I don't know so ... it would only be a guess.

  • IPod LED turning green after only 2 hours of charging

    I noticed that the status indicator on my iPod Shuffle 2nd Gen turns green after only 2 hours of charging. According to the manual, it should only turn green when the battery is fully charged. Should I be worried that something is wrong with my battery? BTW, the shuffle was fully drained when I started charging. And I was using a USB Power Adaptor to charge. Thanks.

    I have copied the following from my Shuffle Manual "Charging the Battery,
    iPod shuffle has an internal, rechargeable battery. For best results, charge the battery fully the first time you use iPod shuffle. A depleted battery can be 80-percent charged in about _*two hours*_ and fully charged in about four
    hours."
    A little farther down it has a section titled "Status Lights" in the very first picture it shows and says
    "Turning on or disconnecting, green - Good charge(30% – 100%)"
    So it would be in the "Good Charge(green light)" range after 2 hours.
    Hope this helps

  • I want to reinstall an app fresh install from iTunes not from my iCloud, I go to manage storage I stop backup and delete app by turning green button off, but when I ask to download it again from iTunes it is only downloading it from my iCloud. help?

    I want to reinstall an app fresh install from iTunes not from my iCloud, I go to manage storage I stop backup and delete app by turning green button off, but when I ask to download it again from iTunes it is only downloading it from my iCloud.
    Please assist
    Thx

    You don't really delete app that way, that way to stop backup for that app in icloud.
    You need to delete it from your home screen and then while it still will look like download from icloud - app will start fresh.
    However if app uses any account sign in the stuff that is attached to sign in will come back, so if you do not want to you need to use
    fresh account as well.

  • I unplugged my iPod Classic without ejecting it first. It played for many hours after this but then it just stopped working and it has a blackened screen that seems to say paused. Wondering if there is a way to get it to work again.

    I unplugged my iPod Classic without ejecting it first. It played for many hours(about 8) after that but then suddenly stopped working and it has a blackend screen that seems to say paused. Wondering if there is a way to get it to work again.

    Hey hughborg25,
    I found an article that can help you troubleshoot when an iPod becomes unresponsive or the screen goes black:
    iPhone, iPad or iPod touch: Not responding or does not turn on
    http://support.apple.com/kb/TS3281
    I would go through all the steps listed there, and the issue should be resolved by the end.
    Live long and prosper,
    David

  • Armenian time is wrong in Apple server. I try to turn off automatically update,but then i cant call through facetime.

    Armenian time is wrong in Apple server. I try to turn off automatically update,but then i cant call through facetime.

    Not sure if this Term is Relevant towards an iPhone but, my iPhone won't Post unless if it's plugged into a Charger.

  • I was surfing online when suddenly my mac just freeze. So i had forced shut down it and turned it on again but then the folder with questionmark icon shows up. And i pressed (option key) to go to the utility but i cant find my startup disk anywhere!

    I was surfing online when suddenly my mac just freeze. So i had forced shut down it and turned it on again but then the folder with questionmark icon shows up. And i pressed (option key) to go to the utility but i cant find my startup disk anywhere!

    Well, if the internal hard drive  is no longer readable, there's pretty much nothing anyone here can do about it. There are no magic words that will fix a hardware problem.
    Make an appointment at the genius bar and have it looked at.

  • Orange LED on power adapter won't turn green after 10.4.7 update?

    Hey guys,
    this could be independent of the 10.4.7 update, but I've noticed that after the update, the LED does not turn green. The battery seems to charge fully, but the icon says, (Calculating...) and the LED stays orange. (left it like this for a whole night)
    So far I've tried to reset the PMU and repaired permissions with no luck. Currently I'm calibrating the battery but I'm wondering whether anyone has had similar issues and whether anyone has a fix for it. Thanks in advance.

    Hey there. Have you had any other issues with your battery, ie. not able to fully charge, or shutdowns before the OS tells you power is getting low?
    The reason I ask (not to scare you) but this inability for the charger to turn green was the first symptom I saw when my MacBook Pro battery was in the process of dying. It happened about two weeks before things went south for this battery. As you may have read on this board, there was a run of batteries for these machines that have shown some serious problems. Ultimately what happened with mine was that it would get down to about 34% charge, and then the machine would just turn off. The battery also would often not charge all the way up to the green indicator, either.
    I am unsure of what else you can try, other than maybe resetting PRAM. Just be on the watch for increased battery flakiness over the next couple of weeks. Not to worry, Apple will replace the battery for you free of charge.

  • Window turns green after a few seconds -Help-

    Ok, I'm certain that my qt drivers are up to date. Whenever I try to play ANY video file in qtplayer, the window does this really strange panning of green until its entirely full. Then the player freezes and the audio gets real choppy. I've got no choice but to close it out (which i can only do from the task manager) and try to boot the player again. Does it every time and I can't watch but a few seconds of video. I'd love some help with this pleeeease!

    Green screen video (as opposed to a normal video playback) nearly always indicate a problem with the video card or its drivers.
    There really isn't a QuickTime driver.

  • IPhone 4 shuts off randomly, will only turn on after hard boot, then shuts back off within 10 minutes

    My iphone 4 just had its 30 pin port replaced and also i believe the battery was just replaced. It will only turn on with a hard start (Holding the wake/sleep + Home) then within the next 10 minutes it shuts back off. I have been trying to recovery mode restore it and it keeps having the problem. I am about to finish another recovery restore. Ill update if this fixes it.

    Whoever replaced the port and the battery made an unauthorized repair, as Apple never replaces parts (except for the battery). Whoever did it broke your phone. Take it back to them, as Apple will no longer touch it.

  • My iphone 4s recentley got cracked. the other day my phone wouldnt turn on at all, but then today i plugged it in and it says its charging but it has been hours and no progress. what do i do?

    help!

    What do you mean by "my iphone 4s recently got cracked"?  By itself?  If by cracked, you mean jailbroke, go somewhere else for a solution.  This forum is for stock IPs, but there is google for risk takers.

  • Must re-enter password after sleeping; but then works okay; what can I do?r

    I see a lot of stuff on the boards about the signal dropping. Ours doesn't do that but we find that we regualarly must re-enter the password, or sometimes just re-connect manually even though the password is there.
    I've deleted some of the "preferences" files to start over. I've also deleted the keychain files to make sure there are no duplicates. Maybe I'm overlooking something. I've also changed channels on our time machine to give that a shot. No fix with any of these options.
    This is a brand new macbook so I would hope everything is working as intended. I'm running out of options...and my wife is frustrated! Ha.
    Any thoughts? Thanks.

    Try opening Network preferences, click Airport in the pane on the left. Click the Advanced button. Highlight your network name if it isn't already by clicking it. Click the "pencil" button. Enter your password there and click Add.
    See if that corrects your problem. Not having a search function right now on the forums is a little frustrating because you can almost always find answers that way. I've never had your specific problem before so I'm kinda flying by the seat of my pants here. If this doesn't help you might try posting the same question in the Airport or Time Capsule forums.

  • My Iphone 5 crashed yesterday, when i try to reboot it it comes up with the apple symbol but then some kind of script runs down from the top of the screen, then after a while it turns off again. Also sometimes it just has a white screen with pink lines

    I have also had the screen have two vertical white blocks on a black background. I have tried rebooting it and restoring it but it has not worked. I have managed to get it to turn on once briely but then it crashed again. I have had it since febuary and have recently ungraded to IOS7.

    Went to restore it and it can't restore, got error 2002.
    This is just  great.

  • Mystery.  jpeg stills require rendering on FCP timeline??

    I'm co-editing a film with a partner on the other side of the continent. We are using a lot of stills. I use GraphicConverter to re-size the 300dpi stills to 72dpi. (300dpi stills slow down FCP considerably, and take a lot longer to render.)
    My 72dpi versions are working just fine. Do not require rendering on the timeline (the green line above) ... so I can set keyframes and plan movements, requiring rendering only when I'm satisfied.
    My partner has done the same thing, with the same still in fact, in GraphicConverter ... but when he brings that 72dpi still into his FCP it requires rendering (red line) before he can even work with it. Ironically, the 300dpi original stills DON'T require rendering (but will, I'm sure, slow down his work to a virtual stall when he gets a number of those stills on the same timeline).
    A mystery? Is there perhaps something we are missing in the FCP preferences, or the timeline settings? The timeline settings are set exactly the same on both systems (HDV 1080i60).
    Any help would be most appreciated,
    Ben

    I had a somewhat similar problem once and it turned out to be some bizzare naming scheme a PC used to name files sequentially.
    Try taking picture A and making your GC version. Have him take picture A and make his GC version. Have him zip the image, email it to you and then you open both in GC and compare their specs. Off-hand I can't think of anything in FCP that would affect this but I'm not sure.
    It could be something innocuous like a resource fork for a thumbnail or his are RGB and yours are CMYK or something.

Maybe you are looking for

  • Need help using Apple Remote Desktop for remote family members

    I am new to ARD and need help. I know there are solutions to do what I am trying to do through LogMeIn and Teamviewer - but I have LogMein right now and the free edtition is going away and I think Teamviewer will do the same sooner or later. I have r

  • Updating a record using variables

    I want to use a variable(s) to update my record. I get a Java excpetion when using this code: <%@ page import="java.sql.*"%> <%@ include file = "/html/common/init.jsp" %> <% String ticketid = request.getParameter("ticketid"); %> <% String comment = r

  • Itunes cannot open itunes store

    itunes cannot access itunes store

  • Will not print correctly. Splits pages vertically in half

    Firefox will not format my pages correctly for printing. All pages are split vertically in half.

  • Packaged class reference in Reflection

    Hi Everyone, i have a package by name ABC. and inside the same i have another package DEF. Now i have a class in ABC package , say MainClass.java. This program by reflection is trying to get the details of a class in the Package DEF. Let the class it