Red Screen in Object Browser (HTMLDB 2.0) with IE

I have tried all of the suggestions listed in the forum and post installation instructions - added the files on the server, cleared every cache option for IE and the red screen is still showing. Does anyone have anything else I should try? I am at the end of my rope!

The following steps have been taken thus far:
- updated the htmldb 2.0 installation with the .htc & .xbl files in the dad configuration
- bounced the apps server & apache
- cleared cache on IE; cookies, temp files, etc.(both within the app & explorer)
Troubleshooting has found that this problem only exists on IE under my profile. If I login as another user on my laptop, I do not encounter the problem. I have had several co-workers test for me and for those that have not used htmldb in dev mode, have no issues. Seems IE is keeping something in cache in my user profile. Any suggestions on how to completely clear this is appreciated. Thanks for the responses.

Similar Messages

  • What is the red block on left of Materialized View in SQL Object Browser

    Hi
    In APEX 4.0 i have a few Materialized Views - all work fine, but when I view them in the SQL Workshop Object Browser, a little red block appears on the left hand side of the MV name.
    I'm curious to know what this might mean.
    Thanks
    Mike

    Hi Jari
    That is what is puzzling me, because if I examine the Details tab of the particular MV it shows as VALID.
    The same shows when I run in SQL:-
    select status
    from all_snapshots where NAME = 'MV_NAME';
    The status is valid.
    It is not a problem - just puzzling?!
    Thanks anyway.
    Mike

  • Unable to view image in HTMLDB   SQL Workshop Object Browser

    Table: DEMO_IMAGES
    Image Id:
    Image Name: Bill.JPG
    Mime Type: image/pjpeg
    Image: Unable to display page region ORA-00932: inconsistent datatypes: expected NUMBER got BLOB
    Debug:
    1: begin
    2: wwv_flow_sw_page_calls.edit_row(:OBJECT_NAME,:OB_SCHEMA,:F4500_P47_ID);
    3: end;
    Any help appreciated.. Bill

    HI,
    Check in the object browser, whether there is any group element. if all your components are grouped, then they will appear under that group. if you click on any component which is grouped the property window of the group will be displayed.
    if you want to see the propery of each individual component, in the object browser-- expand the node and double click the component to see its properties.
    hope this helps
    uma

  • Edit non-functional in Rel. 2 SQL Workshop Object Browser

    Using IExplorer 6. Recently upgraded to HTMLDB Rel. 2. Thus far everything I've tried works fine except for the Object Browser code display and editing function.
    First problem: the code display for Packages, Functions, Views etc. does not wrap.
    Second problem: the edit icon does nothing. Code display is single line with red background (tried creating and then editing a view to make sure it wasn't a privilege problem). I see javascript:toggleCodeArea('e') when I mouse-over the edit button but clicking on it does nothing.
    Has anyone else encountered this? Any hints on troubleshooting it?
    Thanks,
    Fred Pierce

    I knew I should have searched on "Red Screen" 8-)
    Unfortunately the AddType solution isn't working for me. The documentation isn't specific about where to add those lines, i.e. I've tried it in marvel.conf both outside and inside the definition, and in the httpd.conf file in the mime types but neither has had an effect (yes, I restart the http server each time). As others have observed, it does work in Firefox.
    If you could clarify where in the marvel.conf file the AddType is supposed to go that would be helpful.
    I'm having the same problem on two different systems, so whatever I'm doing wrong, I'm consistant about it.
    Thanks,
    fdp

  • The problem (procedure, function, package) in  object browser

    we are using htmldb 2.0 in oracle DB 9.2.0.6. When we are using http server from 9.2 in the object browser for procedures, functions, packages display window show only header and all window is red, all other objects look fine. when the same DB I config with http server 10g(companion cd) it is display all objects fine.
    PS we didn't forget to put
    AddType text/xml xbl
    AddType text/x-component htc
    Is it bug in htmldb through http server 9.0.3.
    MB

    I thought this was a browser issue. I "see red" from IE from my home PC, but I thought that's because my browser isn't up to date. Update downloads are too big for the dialup connection from home.
    My IE and FF browsers work fine from work - where I update them regularly - over a nice fast connection.
    Earl

  • Selecting  views in object browser crashes IE browser

    in HTMLDB v2 navigate as follows:
    SQL Workshop > Object Browser
    in the select list (which defaults to Tables) select Views. This crashes the browser!!
    Have installed the MS script debugger and this pops up the message:
    A Runtime error has occured. Do you wish to debug?
    Line: 50
    Error: Object Required
    The problem occurs for all options in the select list which do not have any objects of that type created in the schema. (ie if no views are created then it will crash. If you then create a view this option works fine)

    Hi
    I have the exact same symptoms as described in this thread.
    I thought I had found the solution, but I use the HTTP Server that is included with Oracle RDBMS version 9.2. This config doesn't have any marvel.conf file. But I think this is the same as httpd.conf in my configuration (?). I had the AddType rows in there but they did not have any dots before "xbl" and "htc". So I changed the rows to:
    AddType text/xml .xbl
    AddType text/x-component .htc
    ... and restarted the HTTP Server but I still get the runtime error as you describe it.
    Any ideas of what to do?
    regards // Frederic

  • Why does Firefox show a red screen briefly on startup?

    Whenever I start Firefox on my laptop, it briefly shows a red screen before heading to my home page. Is this normal for the browser now or should I be looking at my hardware rather than the software?

    That may be related to Firefox switching to hardware acceleration. If the screen buffer that is used isn't empty then you may see older content of it displayed until that screen buffer is cleared.
    *Tools > Options > Advanced > General > Browsing: "Use hardware acceleration when available"
    If disabling hardware acceleration works then check if there is an update available for your graphics display driver.

  • C300 footage does not properly import, video playback in Premiere is frozen or just a red screen

    After working with C300 footage for about 6 months now, this is the first time I've encountered this issue, and I haven't done anything differently with this project to my knowledge.
    I am working with some C300 footage (not much, not even a full 32gb card), and when I bring it into Premiere some, but not all, of the clips aren't able to play back. In some cases the video will freeze on a frame while the audio continues playing, in other cases I'll just get a red frame while the audio plays. In all cases, the audio playback is fine, no issues.
    The issue only occurs on longer, interview clips. I haven't had any issues with clips less than about 1-2 minutes in length. When I get the frozen or red screen, it will stay frozen or red for a while, upwards of a minute or a couple minutes, before the video comes back towards the end of the clip. This is pretty inconsistent though, I haven't noticed a pattern.
    It doesn't matter whether the footage is rendered or not, issue remains the same. Nor is it an issue with lagging playback, if I pause the clip when the red screen comes up and wait it never catches up, never unfreezes. I have tried importing the footage multiple ways: dragging into the project from Finder; navigating through Premiere's media browser; going to File>Import. Same issue every time for the same clips.
    If I try to export the clip, same issue. If I try to bring the footage straight from Finder into Media Encoder to output a ProRes422 version, same issue.
    However, if I take the card structure, and copy it back onto a CF card and pop it into my C300, it plays back just fine. No red frames, no freezing, no issues. So it's not a corrupted card and it's not like I lost any data when copying from the card to computer.
    I'm working with Premiere CC 2014 on a 2012 Macbook Pro (2.6ghz i7, 16gb RAM, 2gb VRAM), I've tried using OpenCL, CUDA and software only as the renderer, same issue with everything. I have also tried multiple computers with the same issue.
    Any help would be much appreciated!
    Sam

    I can answer part of your comment ... PrPro is a beast of a complex and capable program, compared especially to VLC, a simple playback program. VLC takes the data off the drive and just plays it back ... PrPro takes the data from the drive as only a starting point, applies whatever changes have occurred in the timeline for clips & cuts, transitions, video & audio effects, and plays the RESULT of all that back in as close as possible to real-time. Each and every time through is a "new" compilation of data. Unless you specifically render previews for a selection, it's always "showtime" ... live processing of original with all modifications.
    Part of the complexity of the program underlying the work is the built-in system to incorporate changes from AfterEffects, Audition, and SpeedGrade ... also as much in "real time" as possible, and again, without completely re-creating the new sequence as a "physical" file stored on disc somewhere. No other programs out there do that. It makes these more complicated & more complex in the code, and more demanding of system resources in many ways.
    But as they are constantly working to improve the actual operation, far more capable. I'm a one-man operation, and most of the time my stuff flies through the combo of PrPro & Sg, with some Audition work thrown into most projects. Occasional trips to A3. Yes, I get glitches occasionally. No, my projects aren't 30-second but INCREDIBLY complex opening scenes for CNN or ESPN or someone, nor a modern complex commercial shot or a music video. Or ... Heavens ... a 130 minute feature.
    Yet I know of quite a few people who do such work and mostly get through their projects in quite good shape, some of whom help out here regularly. It's a total bummer when YOUR machine is the one glitching. I understand. Right now, mine has pretty much stopped using my GTX770 video card and its 4GB vRAM, more than 29% of CPU, nor more than about 6.5GB of system RAM. Which as you might guess, slows down my playback & renders exponentially. I'll get it handled. But it's been a month or so.
    The vast majority of users are NOT having this problem. Wish I was one of them, as do you. Best of luck getting this moving ...
    Neil

  • Compile via object browser gives ORA-01031 insufficient privileges but...

    Hello,
    Last week I upgraded my APEX version from 2.2 to 3.01; I didn't find any problems up to now. Via the home>SQL Workshop>object browser screen, packages then edit package I modified a package. When I hit the 'compile' button, I got the message: ORA-01031: insufficient privileges.
    When I do 'alter package <package_name> compile [body]' via the home>SQL workshop>SQL commands screen the package is compile succesfully.
    To me this looks like a bug... same (apex) user, same priviliges...
    Has anybody an idea why I can't compile via the object browser screen, receiving the ORA-01031 message, but why I can compile the same package via sql-commands screen.
    The user I am logged on with in APEX is the owner of the package.
    Thanks in advance for your assistance.
    best regards,
    Jan.
    Message was edited by: jan
    J. Hulsing

    Linda,
    Connect as SYSTEM and:
    grant create procedure to XXXXXXX;
    ...where XXXXXXX is the schema name. A DBA would need to do this, of course.
    Scott

  • Object Browser crashing??

    Hello all. Has anyone seen where you try to view items in the object browser by selecting the object type in the pull down menu, and no matter what you select, the browser window automatically closes? It just started exibiting this behavior and I haven't made any changes to my browser or http server. Browser is IE version 6.0.2800. HTMLDB 2.0. HTTP server 9.0.

    @mcperez,
    Does your T510 come with the Optimus or switchable? We have a ongoing case with the T400/T500/R500/W500 issue with IE9 and SP1. Engineering are working for a new driver as the Intel one is outdated.
    Could you try running TVSU and see if you have your drivers updated properly.
    //JameZ
    Check out the Community Knowledge Base for hints and tips.
    Did someone help you today? Press the star on the left to thank them with a Kudo!
    If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"!
    X240 | 8GB RAM | 512GB Samsung SSD

  • Table Object Browser

    On the table object browser if the screen is not maximised you don't see all of the tabs.
    The only way to get to the far right tabs is to use the scroll arrows beside the tabs.
    This actually selects and executes each tab instead of just moving the tabs to the left so you can get to the far right tabs.

    What version are you using? 2.2.0.00.32
    What are the column datatypes? I have several VARCHAR2, NUMBER, DATE, and CHAR columns.
    Are you using (do you see) the Create or "Create and Create Another" button?
    Yes, I tried both the "Create" and "Create and Create Another" button.
    Does it work correctly on apex.oracle.com?
    Hmm...looks like I will have to request a new Workspace. I haven't logged into there for quite some time (forgot my Workspace name, etc.)...and the email address you have on file for me is no longer a valid email address.

  • IPhone 6 stuck in red screen starting loop and won't restore.

    Ok, so i've been using my iPhone 6 happily since release day, the only problem I had was a flickering white line at the bottom of the screen while browsing certain webpages and using certain apps. It got to the stage where it was annoying me enough to make me contact apple support. The advisor told me to reset my settings and that should fix the problem... It didn't, it has just made things a whole lot worse! My phone failed to restart after resetting my settings, and has been stuck in a startup loop ending with a red screen for about an hour now. I tried a hard reset with no luck, and now I've just tried restoring it using iTunes, but the restore process says it will take 25 HOURS! ..After about five minutes, and while still connected to iTunes, my phone started going back through the red screen loop and the restore looks like it won't do anything. Please help! I tried to contact apple live chat again, but conveniently it's not available at this moment...
    Cheers,
    Matt

    yes, just to say a big thank you to Apple ...realizing today while browsing these forums that I haven't been the only one. Happened to me when I updated from 8.1.2 to 8.1.3 OTA... device (iPhone 4s) stuck in recovery mode ... how nice, this has never ever happened to me after years of using iOS, whether I updated OTA or via iTunes, never. I was then delighted to experience the restore process ... wasted hours doing that thanks again ! (I have many apps and a big backup so...). Seriously, this is unacceptable.

  • NETSCAPE 7.1 did not work with 2.0 Object Browser

    If I use Object browser I can select table, view, sequence...
    but nothing is shown. I tested on htmldb.oracle.com
    All works fine with IE, ...
    Query Builder works with Netscape

    Hi Lutz,
    Netscape 7.2 or higher is required.
    Joel

  • Trigger edit red screen - missing xml mime types from installation?

    trying to edit some trigger code - red screen displays. I've seen this in the 'regular' htmldb when the two AddType lines were not added to the httpd.conf file. But in OracleXE Windows, where would I find these to check or add to what file?
    Wayne Linton

    anyone know how to add the HTMLDB mimetypes to firefox? I know how to do this using Apache/httpd.conf, but I'm using a remote windows box over the web. I think I need to add them to the mimeTypes.rdf file in the Firefox profile but don't know how.
    Wayne

  • Properties window and Object Browser window not visible anywhere

    Although "Properties"  and "Object Browser" are ticked in the View menu, the windows do not appear anywhere on the screen (yes I have looked everywhere).  The "Components" window appears as normal.  It does not matter what Xcelsisus file I am working in, as the problem is the same even when I first launch Xcelsius.  I was running Xcelsius Engage 2008 with Office 2003 and did not have this problem.  I recently upgraded to Office 2007 and now I have this problem.  I run the same software on my notebook without any problem.  Very frustrating.  Any ideas on how to fix the problem?   Thanks JR

    Hi JR,
    This should be something simple.  Please use the shortcut to get focus to :Object Browser" by pressing Ctrl+4,  If you are unable to spot the object brower, it must be minimised eighter of the corner of Xcelsius window.
    Use "Restore Dwon" button which will be at the right top corner (before Close Button) so that your Xcelsius window become smaller size. Try to find the border of the working window and make it smaller in all 4 sides using mouse.  You will find the Object Browser, Property window somewhere.
    Please revert if this does not helps you.
    With best wishes
    BaaRaa.

Maybe you are looking for