Red Secondaries

Hi
I'm having a real hard time figuring something out. I can do most things I want to do in Speedgrade, but my secondaries get my way frustrated.
When I apply a secondary layer, it all seems fine, until I start touching any dials and sliders, in which case the entire layer turns red. This isn't related to picking the colour red or the colour/gray mode, the whole picture literally turns red, like the attached picture.
I've searched high and low and asked folks on twitter, but I can't get an answer as to why this is happening, nor is there any way I can get rid of it but to delete the secondary layer.
Your help would be greatly appreciated, as I've wasted a lot of time trying to figure this out.
Thanks
EDIT> I saw an earlier post on the forum I hadn't noticed before. The solution is in the channel views under Timeline which should be set to normal.

Hello 1234lolakox,
Welcome to the Apple Support Communities!
I understand that your iPod shuffle is no longer charging as you would expect. The red light does indicate that there is a minimal charge on the device as described in the first attached article.
iPod shuffle (4th generation): Checking battery status - Apple Support
If your iPod shuffle will not charge, you may consider having it evaluated for service. For more information on that process, please review the next attached link.
Apple - Support - Service Answer Center
Have a great day,
Joe

Similar Messages

Monitor Out Issue and 2K proxy from RED Issue

I'm having two monitor issues since I updated to FCS3 (Color 1.5)
The first is with most footage.
Most any footage that I bring into Color 1.5 using the "Sent to" feature from FCP7 (720p, 1080p, etc) will not be displayed in my external monitor (JVC DTV). This was not a problem in previous version of Color or FCP. When I adjust "Video Output" in my Color Preference from SD to HD 720p, 1080p etc... My monitor recognizes that new input. It tells me that it is no receiving a signal in a different frame size (rate). I have tried every combination of monitor setting under the sun in the Color Preferences Room and nothing will change that. (This is not a universal issue). I DO NOT HAVE ANY OF THESE ISSUES IN FCP7. There are only two ways I can see this footage, the first is in my Projects Settings bin in my Preferences Room. If I change my Resolution Presets to any of the 4k options, I see a tiny picture in my external monitor. The other way I can see an image in my external monitor is to go into my Secondaries Room, enable a secondary, goto the preview window and select the Color Matte tab (the middle of the 3 tabs on the upper right of the picture).
The second issue I'm having is with RED proxy files. When I bring into Color 1.5 2k proxy files from the RED everything works and plays fine (in all monitors) except there is a black artifact (bar) along the bottom right. Again this is not the case when I'm looking at these same files in FCP7.
Any help fixing these problems would be greatly appreciated ASAP. I'm scheduled to be grading a $600,000 dollar film in the coming weeks.
Thank you
Color vs 1.5
QT 7.6
GFX Card: VIDIA GeForce 7300GT
PowerMacG5 (Quad Processor)
MacOS 10.5.7
RAM: 4 GB
AJA Kona: 6.0.5 (also went back to my old 6.0.2 with the same problems)
Monitor: JVC DTV- checked this in multiple monitors with the same result

My Project settings are exactly what i want for this given project (as example)
Resolution Preset 1280 x 720 HD
Frame Rate 59.94
Width 1280
Height 720
Printing Density: Linear (0 Black - 1023 White)
Render File Type: Quicktime
Quicktime Export Codec: Original Format (But tried different options here with no result)
Geometry room looks clear, Scale, AR etc are all standard 1 or 0

Order of secondaries

Hi All
Does anyone know whether the secondary 'rooms' work in the same way as photoshop/fcp layers, or are they independent of each other. In other words: will the actual order the secondary corrections are applied in affect the final product, or do they all work as an already blended complete clip?
I am wondering if I need to plan a bit in terms of what correction I will do where. For example: I add a vignette of red/orange in 'room 1' to simulate a sunrise colored sky, then I change the color of the sky in 'room 2' to a deeper blue. Does this mean that the color of the sky could be considered to be 'on top' of the vignette in 'room 1'?
cheers
-j-

It would be nice to be able to drag the tabs left and right to re-order the secondaries... but that is not possible at the mo.
What bugs me is that moving from clip to clip leaves you in the tab you were last working on instead of going back down to the first tab, regardless of how many are active, instead of dropping down to tab 1 (if all the rest are disabled)...So if you got up to #8 on the last clip, and moved on, then going back into secondaries, you have to move back down to #1 deliberately, otherwise you will be parked on #8 as the starting tab for the next grade...
Copy and Paste.
jPo
Message was edited by: JP Owens

Color tips from the experts (Image is too red)

As you can see above, the image is too red. This is probably very simple to solve but what would be the best way to get it regular?
Message was edited by: JosephTorres
Message was edited by: JosephTorres
Message was edited by: JosephTorres

Yeah, I see this all the time.
Sodium street lamps are not flat-spectrum (why not? Don't they know people are shooting video?) And you get this illuminant error.
So.... white balance isn't going to work, is it? Those highlight streetlamp are already clipped out to R=G=B, aren't they? Black balance is probably right, too, because R=G=B=0 down there. What does that leave?
Mids. You can probably push a lot of cyan-blue into the mids. If you find this contaminates the blacks too much, then the fall-back might be go into secondaries and do an H-S qualified matte, and give the blue-cyan vector a big push.
What, you mean this isn't a suspect running away from an arson? Could be correct in the right context, is all I'm sayin'.
jPo

Loops in red & importing sounds from iMovie

There are some loops in red and I have tried to import them through setup but it says they are open, also when I try to import from iMovie it says "NOT INDEXED"?

answered

ITunes wont open. Error message has no text just red octagon with !

I plugged in my iPod this morning which is set to automatically launch iTunes. A window came up after several second but there was no text telling me what the error was.
The only thing showing in the window is a red octagon with an exclamation mark in the middle. Overlapping the bottom right portion of the octagon is the blue iTunes cd icon. There is also a button allowing me to close the window.
The system appears to be unaffected by this. I have tried running permissions, deleting the plist from Preferences, rebooting, but the same window keeps popping up.
Can anyone tell me what type of error this is and how to fix it?
I'm running a 1.42 GHz, G4 Mini with 1 GB of RAM. My iTunes music resides on an external firewire drive with the library files in the Music folder on my hard drive.
Thanks in advance.

I'm getting the same problem.
I have no iPod. I can quite iTunes. I tried restarting. Same result.

Line with red blob

What is the line with a red marker on its left-hand end, in iCal's weekly view????

Hey Andy,
That is a time-of-day marker, I believe.

I transferred data from my external hard drive to my restored Mac Book Pro via migration assistant and now my external hard drive in time capsule has red minus signs. How do I get rid of that without getting rid of any of my data?

I used Migration Assistant to transfer my data from my external hard drive via Time Capsule to my restored Mac Book Pro. When I now go into Time Capsule I there are red minus signs in the corner of all the folders that are contained in my back up. How do I get rid of this and access my previous back-ups?

Select the drive and Finder > Get info and at the bottom "ignore permissions on this volume"
You can copy the files, but the ownership on the files still belongs to the other user account, once your done copying, then perform a #6 Reset Users Permissions and that will set all the ownership to that account.
..Step by Step to fix your Mac
Another method is to copy the entire folder, then change it's permissions.

Oracle 8.1.5 on red hat 6.1

hi,
i am trying to install oracle 8.1.5 on red hat 6.1, i entcountered the when i am trying to run runInstaller.
initializing java virtual machine from
/usr/local/jre/bin/jre please wait.....
error in createOUIProcess(): -1
:permission denied.
I have installed jre1.1.6 v5 downloaded from
blackdown.org as a root user.
I am unable to understand why this permission denied problem is coming.
please help out.
thanks
rajneesh
null

You need JDK. the same version of jre that u used.
then export CLASSPATH to point to classes.zip of the jdk.
Thanks

Installed the update tonight and now my phone (Lumia 928) won't power up. I've tried a soft reset, but the screen goes from the Nokia logo to a red Verizon screen to a black screen. What's wrong and how do I fix it? Help!

Installed the update tonight and now my phone (Lumia 928) won't power up. I've tried a soft reset, but the screen goes from the Nokia logo to a red Verizon screen to a black screen. Tried it 10 times with the same result. What's wrong and how do I fix it? Help!

Oh no Mr.Ected!
I can see if we can get your phone back on! I understand how important it is to have a phone. Have you tried this to see if we can get it back on? http://vz.to/1DZhteH . If it is still goes to a red Verizon screen and then to black we might need to do a master reset. While the phone is off try this:http://vz.to/1DZhXkU Be mindful this is the last resort because it will erase everything on the phone. If you have done back up assistant in the past you will be able to get you contacts back. Please let me know if you need any more help.
AmberF_VZW
Follow us on Twitter @VZWSupport

Media Encoder CC // Red Giant Denoiser II

Hello there,
i've got the following Problem: I am having Premiere CC and used the Red Giant Plug-In Denoiser II on my last project, when i import this project to the Media Encoder and select Quicktime for output, the Media Encoder won't render the clip with this Plug-In. i always get the original files out, without the denoiser.
thx

no windows, footage is cinemaDNG 2,5k RAW from Blackmagic Cinema Camera.

Why is the LookUp object in the Flow Task of my SSIS package going red (and not working) ? Sql Server 2008 R2

I have been working with the Sql Server 2008 R2 SSIS Tutorial at
https://msdn.microsoft.com/en-us/library/ms170419(v=sql.105).aspx
--specifically -- Lesson 1. I have been having some problems with this lesson where the source data from the samples download doesn’t exactly match the data described in the tutorial, and the tables in the tutorial are different from what
is contained in AdventureWorksDW (tutorial refers to DimTime – AdventureWorksDW contains DimDate and no DimTime).
So, after futzing in BI with this tutorial so that I can at least get it to run in Debug – it errors out on the 2nd LookUp object.
Rather than looking for a fix to the problem(s) that I am having between the tutorial and the stuff I downloaded in the samples --
I want “Adapt” the tutorial so I can use the stuff I downloaded and hopefully learn how to use SSIS with the elements (source data and tables) that are present on my workstation.
Here is a description of what is going on for me – which I really don’t understand what is going on in BI – based on the images below – like what columns (from what tables) are they associating to in the OleDB Destination?
Note: the sql in the LookUps here is the sql that I copied from the tutorial.
I probably need to modify these sql statements – so -- the help I am requesting is to make the required modifications/changes
so that I can adapt this tutorial with the stuff that’s on my workstation.
I downloaded the samples and the AdventureWorksDW mdf for Sql Server 2008 R2.
It turns out that in the tutorial it wants me to select a DimTime table, but the version of the AdventureWorksDW db does not contain a DimTime table.
Instead, it contains a DimDate table. So I tried adapting DimDate for the tutorial.
Additionally, the sample data file -- SampleCurrencyData.txt -- has slightly different data types than the types described in the tutorial, so I selected data types for the columns in the datasource text file that would work in BI would to
connect column from source data file to the table.
After finishing all the steps for Lesson 1 -- when I tried debugging the package – and it error'd out on the 2nd Lookup object whichwent red.
 I edited the lookups and the sample Ole DB Destination to "ignore on fail” and I did all
green but the FactCurrencyRate table is not being populated -- as described in the tutorial, so I reset the on error back to default (Fail on error option). And based on this tutorial -- I believe FactCurrencyRate
table is the table which is supposed to be populated with the data from SampleCurrencyData.txt?
In the sample data file that downloaded with all the samples I removed all the data from the text file except for 6 rows, so instead of the original 1100 or so rows, I have only 6 rows of data in the source data file (just to keep things
simple for debugging for now). I did not modify the data itself.
Here is what the (raw) data contained in SampleCurrencyData.txt looks like (from the samples that I downloaded from codeplex) – it’s supposed to be 4 columns of data – float, nvarchar, datetime, float:
0.281690141 USD
6/26/2004 0:00 0.281713948
0.281690141 USD
6/27/2004 0:00 0.281642539
0.281690141 USD
6/28/2004 0:00 0.281761573
0.283286119 USD
6/29/2004 0:00 0.283221933
0.283286119 USD
6/30/2004 0:00 0.283358363
0.281690141 USD
7/1/2004 0:00 0.281682206
Below are images of my BI Layout for Lesson 1 from this tutorial -- the FlatFile and configurations for On Fail Error, A Flow task, the 2 LookUps (CurrencyKey and DataKey), the OleDB Destination configuration, the Design view of the associated tables and
the Debug Run of Lesson 1, and the following error messages. My goal is to figure out what is going on in BI for this tutorial.
Error: 0xC020901E at Extract Sample Currency Data, Lookup Datakey [51]: Row yielded no match during lookup.
Error: 0xC0209029 at Extract Sample Currency Data, Lookup Datakey [51]: SSIS Error Code DTS_E_INDUCEDTRANSFORMFAILUREONERROR.
The "component "Lookup Datakey" (51)" failed because error code 0xC020901E occurred, and the error row disposition on "output "Lookup Match Output" (53)" specifies failure on error. An error occurred on the specified
object of the specified component. There may be error messages posted before this with more information about the failure.
Error: 0xC0047022 at Extract Sample Currency Data, SSIS.Pipeline: SSIS Error Code DTS_E_PROCESSINPUTFAILED.
The ProcessInput method on component "Lookup Datakey" (51) failed with error code 0xC0209029 while processing input "Lookup Input" (52). The identified component returned an error from the ProcessInput method. The error is specific
to the component, but the error is fatal and will cause the Data Flow task to stop running.
There may be error messages posted before this with more information about the failure.
--this is the flat file
-- SampleCurrencyData.txt (which only contains 6 data rows for my purposes)
--and here is where I assign the data types for the colums of -- SampleCurrencyData.txt
This is the first LookUp Object -- LookUp Currency Key – The DB contains DimCurrency table.
I copied the sql from the tutorial here.
I actually have a DimCurrency table in my copy of AdventureWorksDW.
Here’s the design view of DimCurrency and a sample of the data contained in DimCurrency and the On Fail configuration
I actually have a DimCurrency table in my copy of AdventureWorksDW.
Here’s the design view of DimCurrency and a sample of the data contained in DimCurrency and the On Fail configuration
--Here is what the data looks like in the DimCurrency table
--2nd LookUp object -- LookUp Data Key – this is the LookUp
where BI errors out on Debug
--it appears this lookup is referencing the DimDate table – which I DO have in the DB.
--I can’t find the following sql in the tutorial, so I suppose BI added the sql (did it?)
--Here's how I configured for On Error
--Here is DimDate table in Design view
--Here is a sample of the original data contained in DimData
OleDB Destination
--Here is where I get lost a bit – what is going on in the destination here?
--Here's my On Error configuraino
--and here is the FactCurrencyRate table
--and here is a sample of the data contained in FactCurrencyRate
Rich P

Thank you for your reply. I changed the error handling as you suggested on the 2nd lookup to redirect to unmatched rows. Now I get all greet. I don't have the conditional split as in your diagram. But also, nothing appears to have
happened in the DB. Aren't the rows in my text file supposed to be added to the FactCurrencyRate table?
How do I get a conditional split?
Rich P
OK, sorry I forgot to reply you back.
Conditional Split was just dummy task. Ignore it.
Manipulate the data in such way that you get matching records.
Inside Source, for first 2 rows I put the dates which are available in DimDate.
1.00010001,ARS,7/1/2005 0:00,0.99960016
1.00010001,ARS,2/5/2006 0:00,1.001001001
1.00020004,ARS,9/5/2001 0:00,0.99990001
1.00020004,ARS,9/6/2001 0:00,1.00040016
1.00050025,ARS,9/7/2001 0:00,0.99990001
1.00050025,ARS,9/8/2001 0:00,1.001001001
Then in OLE DB Destination, I loaded the rows to TestFactTable.
(Now, you don't even need NO MATCH OUTPUT as there are matching records here)
Cheers,
Vaibhav Chaudhari
[MCTS],
[MCP]

Configurar SAPROUTTAB para permitir acesso de fora rede interna

Bom tarde pessoal,
Gostaria de saber, como faço para configurar a rota no saprouttab para liberar o acesso externo via front end?
Ex:
O usuário na sua casa, configura o front end com o ip publico e o ip do servidor interno da organização e o mesmo terá acesso para logar no sistema remotamente.
Outra pergunta, preciso alterar o firewall interno para liberar este acesso?
Obrigado e abraços.
Denis

alo Tomas,
podes me ajudar a validar o que esta a faltar aqui neste meu ficheiro razao pela qual nao cosigo me conectar de fora.
# SNC connection to and from SAP
KT "p:CN=sapserv2, OU=SAProuter, O=SAP, C=DE" 194.39.131.34 *
# SNC connection to local system for R/3-Support
# R/3 Server: 192.168.1.1
# R/3 Instance: 00
KP "p:CN=sapserv2, OU=SAProuter, O=SAP, C=DE" 10.1.1.15 3200
# SNC connection to local WINDOWS system for WTS, if applicable
# Windows server: 192.168.1.2
# Default WTS port: 3389
KP "p:CN=sapserv2, OU=SAProuter, O=SAP, C=DE" 10.1.1.15 3389
# SNC connection to local UNIX system for SAPtelnet, if applicable
# UNIX server: 192.168.1.3
# Default Telnet port: 23
KP "p:CN=sapserv2, OU=SAProuter, O=SAP, C=DE" 10.1.1.15 23
# SNC connection to local Portal system for URL access, if applicable
# Portal server: 192.168.1.4
# Port number: 50003
KP "p:CN=sapserv2, OU=SAProuter, O=SAP, C=DE" 10.1.1.15 50003
# Access from the local Network to SAP
P 10.1.1.15 194.39.131.34 3299
# Permitir todas as redes temporariamente
P * * *
# deny all other connections
D * * *
Obrigado .

Red interference during capture with FCP 5.1.4

I have FCP version 5.1.4 . I am using OSX 10.6 snow leopard (Macbook Pro). Have captured and edited without any problems. All of a sudden I am getting an interference during capture. This interference comes in the form of a bright red color which suddenly fills half my screen from corner to corner forming a right angled triangle and hiding half of my picture triangularly. it flashes and then remains. Anyone know what the **** this is and how I can rectify it?
I would be EXTREMELY for any help anyone can give me. Thanks in advance.

This is happening to me today as well. Has it got something to do with 10.6.7 I have just updated and now I seem to be having the same problem
Pleasa Help

Log and Capture in FCP 6.0.5 flash red frames

So I have been having a very odd and troubling issue during my log and capture stage in post production, whenever I try to import a tape into FCP I get this intermittent red colored frame that flashes for what I could only guess is a frame and it happens probably every ten frames or so; I've tried every combination of hardware troubleshooting from a different deck and camera, tapes from all different times and cameras and formats, different firewire cables and even different firewire ports.
Has anyone has any experience with this or even anything like this, and if so how can I make it stop, I have even tried that final cut maintenance program and basically everything short of a clean reinstall... do I really have to go that far!?

Some users have success with the newer drivers others not so fortunate.
Read through this thread:
http://discussions.apple.com/thread.jspa?threadID=2676952&tstart=0
Al

Red Secondaries

Similar Messages

Maybe you are looking for