Red Timeline box. Not render line entire timeline box turns red

I ran into an issue on Premiere Pro cs3 after updating my mac to Mountain Lion. No issues until update. The entire timeline box turns red when I insert a video. Not the render line but the entire box turns completely red. anyone have any ideas?
I realize I need to update, I am a college student, but I do freelance for a nonprofit so I need this up and running as fast as I can.

That SEEMS like a case where your graphics driver needs to be updated... but NO way for anyone to tell without hardware information
More information needed for someone to help... click these links and provide the
requested information
-http://forums.adobe.com/message/4200840
-http://forums.adobe.com/thread/416679
-http://forums.adobe.com/thread/419406
ADDED
IF you have nVidia (you did not say) read
Mac & nVidia Driver http://forums.adobe.com/thread/1075592

Similar Messages

AVCHD footage, Timeline is yellow and will not render past a certain point ??

Hello,
I am using Cs5, and footage is from a Sony NXCAM, AVCHD, 1920x1080i. Anyway, all the footage is the same, about 60 minutes worth.
I have an good video card, the 3800 so I am able tyo use the Mercury engine. And I have started this project twice now from scratch, with the same results each time.
From the onset, the clips I put on the timeline create the 'yellow' bar, even though the settings I use match my footage exactly. (Strange)
Some of the transitions I use turn the yellow area to red, and it doesn't play back well unless I render the entire work area. All is well until about 12-15 minutes in, then when I ask the software to render the entire work area it no longer does. It just starts playiong the timeline like it already did it. But the small red and yellow portions are still there.
So why it won't render betond a certain point is very puzzing!
I took about 40 minutes of footage directly to Encore and was able to put the whole timeline, red parts and all on to a Blue Ray disc.
I then exported the mixed colored timeline to media encoder, I wanted to create a smaller SD file for DVD and 'encoder' only encoded the green area of the timeline, about 12 minutes.
Anyway, I cannot get the timeline to render after about 12-15 minutes of footage. The time was slightly different on both projects.
Any help would be appreciated!

When Timeline will only Render a certain section, it is often that the WAB (Work Area Bar) has become set to less than the full Timeline. If that is the case, click the \ (Backslash key), and then Dbl-click the little block in the middle of the WAB to reset to the full Timeline.
Good luck,
Hunt

Choppy playback, when render line showing gray (niether green or red).

Hello,
Initially the render line shows red and gray in some parts. When I render the movie the red sections do turn green, but the gray portions remain gray. Playback is fine while in the green areas, but stalls and becomes extremely choppy when passing over the gray areas (I've posted a phicture to help make my explaination a little clearer). Does anyone know a fix for this?
Thanks,
Nadine.

Vid_2011
What version of Premiere Elements are you using and on what computer operating system is it running?
Without further information, there is nothing to fix. See explanation to follow.
The area of the Timeline over which the green line appears tells me that you
(a) edited original video which presented with no color line and the edit forced the red line which you "rendered" to green.
(b) Or, you had content that imported originally to present with the red line over the content and you rendered to green.
A video properties and project preset mismatch.
What are the properties of the Timeline over which your "gray" no colored line situation exists? At face value, they could be imported media that imported with no colored line over their contents, and you have not edited yet. Please detail the situation so we know the real situation.
Just in case recap....
no colored line over Timeline content (only seen on first drag before edit of content) when native format and project preset is set to match the properties of the source media. The program is telling you that you have the best possible preview. So, no rendering is needed or possible. If you edit this type, the indicator line turns red and rendering/edits/rendering thereafter involve only red green changes, no more no colored line.
green line over Timeline...you have the best possible preview, no rendering is needed or possible.
in versions earlier than 11, red line indicates need for Timeline rendering to get the best possible preview. After the Timeline rendering, the red line turns green with all the implications stated above.
In versions 11 and 12, the red Timeline render indicator is no longer and now is an orange line.
Please review and consider and please get back to us with more details as to what is in the tracks below the render indicator lines.
Thank you.
ATR

Opacity and render line not visible

I am currently using premiere cc and my sequences are not showing the yellow render line or opacity filter, it is only showing the FX indicator. How do I get it to display the yellow line and opacity?? I am trying to fade in and fade out with the markers like I was able to in CS6. I've searched but can't find much.
Thanks
David

Dear
For Detail Study about XML ,
https://www.sdn.sap.com/irj/scn/index?rid=/library/uuid/ee639033-0801-0010-0883-b2c76b18583a&overridelayout=true
Regards
Tushar Dave

My catalog pictures render fine in the Library module but will not render in the Develop module. I get a blue box with a white X across it in the window where the picture should render. Any ideas on how to resolve this?

My catalog pictures render fine in the Library module but will not render in the Develop module. I get a blue box with a white X across it in the window where the picture should render. Any ideas on how to resolve this?

Developer Module only shows blue square with a white cross, images are displayed in the library ok but not im developer Module

Videos Will Not Render.

I have been working on some videos recently and Adobe Premiere Elements 9 has been working great for me.... Until today.
When I try to render the videos which had successfully rendered beforehand, they will not render! But it WILL render .05 of a second of a clip. This problem has just risen today and it is annoying the daylights outta me. A bit of backround, I use a portable hard drive to hold all the footage when I make a video because the computers I use do not have enough space to hold all my footage. But this is kinda second guessed because when I make a new file on the pc I am using at the time, make a title, and give it a rendered effect, it will still do the same thing.
I hope to hear from someone soon.

Welcome to the forum.
Just to make sure that I am on the same page, as you, when you say "render," you are speaking of hitting the Enter/Return key, to Render the Timeline, for the smoothest playback. Is that correct?
Now, on your Timeline, when you make a changes, such as adding an Effect, or any sort of overlay, such as a Transition, PiP, or an overlay Title, you will get a red line above that Clip, or portion of a Clip. If one hits the Enter/Return key, ONLY that/those section(s) with the red lines, will Render. However, if I read correctly, you are getting the red lines, BUT not all of that/those Clip(s) will Render. Is that correct?
When only part of a Timeline Renders, the first two things to check are the position/length of the WAB (Work Area Bar). That can become accidentally set to too small a portion of the Timeline. The easiest way to make sure that the WAB has been extended to the full Timeline is to hit the \ (Backslash key), to zoom out to see the full Timeline, and then find the little "box" in the middle of the WAB. Dbl-click on that, to make sure that it has expanded to cover 100% of the Timeline.
The next thing to check, is has an In, or Out Point been set on the Timeline. This can happen accidentally, if the CTI (Current Time Indicator) has been set to some point other than 00;00;00;00, or the full Duration of the Timeline, and the I (eye key) for In Point, or the O (oh key) for Out Point has been hit. The way to look for an In Point, or Out Point on the Timeline, is to look at the Time Ruler, and see if it is a different shade of gray, over Clips, before the end of the Timeline.
If neither the WAB, or a Timeline In/Out Point has gotten set, I have a question: where are the Scratch Disks for that Project set? Especially with external HDD's, I have that location set to "Same as Project," so that all Render files, and the Media Cache, etc., are set to that same HDD.
How much defragmented free-space do you have on the HDD, where the Scratch Disks are set?
If to the external HDD, what is its connection type, i.e. eSATA, FW-400/800, USB, etc.?
For the OS, how much defragmented free-space exists on your C:\?
Good luck,
Hunt

Missing render file/project will not render

I'm new to using FCE - just got my iMac with FCE pre-installed a few weeks ago - and have run into a big problem with current project. When I open the program, it tells me one render file is offline and I can reconnect or continue. I have no idea where the file could possibly have gone, so I select 'continue'. But now the project will not render. I have four sequences open in the project file, and have tried everything - locking and unlocking tracks, selecting various combinations of render both, render all, render selection, rendering only audio or video, etc. All the appropriate render selections are checked in every option. But still, the project won't render any of the sequences; the render box comes up for a split second and goes away faster than the eye can follow. I've tried setting the scratch disk; that didn't help. I tried saving the project, closing and opening the project, etc. Nothing helps. It just won't render. Does anyone have any idea how I can fix this problem?

When I say it won't render, I literally mean nothing happens when I hit the render command. I see the red timeline render bars. However, I see them only when I go to export the video as something else - a mov, dv stream, etc. In the project while working, there's nothing indicating render is required.
To try and solve this problem of the missing audio clip, I opened a new project and imported the .mov file I was working with initially, which theoretically should have all its parts intact. I made the necessary modifications to the file (essentially starting all over) and then attempted to render. It still won't render. Nothing happens at all when I click any of the render options, even after I've made modifications to the video that would clearly require render - changing the aspect ratio and applying a widescreen video filter. So the program should recognize the changes and render, but nothing happens, whether I choose render from the menu or hit the keyboard shortcut.
I'm a little hesitant to try scrapping the preferences as suggested above, but I am totally perplexed.

Aspect ratio and render line issue

When I overwrite the video from the source (top left) window to the timeline, it is changing the aspect ratio and a red 'render' line is appearing on the time line.
The video is now zoomed in and pixelated.
I have not had this issue while editing with my other files and the settings seem to be correct. Am I missing something super obvious?

The PPro tutorial list in message #3 http://forums.adobe.com/message/2276578 may help, with more help in message #5
Look for the NEW ITEM information on page 5

AP pro 1.5 will not render

Sorry to be repetetive but my project will not render for some reason. THis machine in its current configuration
has worked well in the past and the only difference is that I increased the RAM from 1 gig to 4 gigs. It has been suggested
that I deacivate the program and re-install AP Pro 1.5. Is this a good remedy? The machine is a single core P4 3.6ghz and
has done the job just fine prior to this. The ironic thing is that the project will export to DVD withour being rendered and looks
pretty OK with just a couple of minor hiccups in the picture.
Thanks
Mick

Mick,
If you have the red bar but can see the preview without stuttering or hiccups, there is no need to render. If you have used color correction, multiple layers, some other effects, it may be different. Then the preview may stutter and if you want to see it in all its glory, you need to render. Just the other day I had a very long timeline (5+ hours) that was all red. I had no need to render it at all.
On encoding everything is rendered again, but only for the encoding (unless you tell AME to use Preview Files, which I advise against).

CS6 (Windows) My Images are not filling the entire program window

My sequence is set to 1920x1080 and I have imported some images (Tiff's) into it that are of the resolution. Yet, when I go to those images in the timeline, they are not filling the entire available space. The entire image is being displayed, but it is supposed to fill the entire screen. You can see for yourself with this image attachments.
Ideas?

OK, the Default Scale to Frame Size box was unchecked, I checked it.
The aspect ratios match.
I understand what you are saying about pixel depth, but 1920 x 1080 is still the width and height of the image and the image and sequence both show the same width and height, think that I should not get what I am getting here.
I checked the "Modify|Interpret Footage" option and the radio button is set to "Use Pixel Ratio From File: Square Pixels (1.0)" and changed it to Conform to Square Pixels (1.0) and still have the same results.
This is not happening with just one image, it is happening with all of them. If I bring in an image that is 3840x2160 (200%) and then set the scale to 50%, I still get the same black space. So, it is either fill the screen and cut off some of the displayed image or live with black space. There is just something wrong here I am not seeing.

Rendered clips turned out to be not render after premiere pro update

Hello guys,
I was using the old version of premiere pro for quite awhile, then my colleague told me to update it to the lastest to fix any bugs that exist.
so I updated my premiere pro to version 4.2.1.
After the update, I realised all the rendered files became not render. the timelines were all red and the program did not prompt for the rendered clips when I open the projects. For what I know, the rendered clips are still in the folder 'Adobe Premiere Pro Preview Files.'
I am really desperate for help as the amount of clips rendered is really a lot. I appreciate any help, thanks so much.

Welcome to the forum.
It sounds like the update might have separated the Render files from the Project's links.
Now, remember that Rendering is only necessary for the smoothest playback. You only have to Render, where you are working with critical aspects, like Keyframing Motion/Scale, or adding Effects. I complete many Projects, and never bother to Render, as I can see playback at a high enough level to do my editing. OTOH, there are often tiny segments, that might get Rendered many dozens of times - usually where Keyframing was done.
One can use the WAB (Work Area Bar) to just Render a small segment of the Timeline.
Now, why your existing Render files became un-Linked, I do not know that answer.
Good luck,
Hunt

ADF JDeveloper wysiwyg visual editor does not render properly my jspx page

Hi everybody,
I am working with JDev 11.1.1.5 and I have an issue with the wysiwyg visual editor.
My jspx page does not render properly: I cannot see the full page whatever is the resolution, even in full screen mode.
I've tried to activate in the preferences the option Show Design Time Messages in Log but it does not display any error.
When I run my page or execute a preview of my page, my page is rendered correctly the browser.
Can someone help please?
Thanks by advance

Hi Frank,
I've tried to change the resolution but whatever is the resolution the page is not rendered correctly. Actually, I can see the full page, but there are some panel boxes which are not displayed.
In my page, I have a main panelgrouplayout which contains 2 dashboard panels. The second dashboard contains panel boxes, only the 3 first rows of panel boxes are displayed in this dashboard panel while I have 6 rows of panel boxes.
In the design page, when I click on the 2nd dashboard and do "design this container", I can actually see that all the rows display correctly, it simply that I do not see them all in the main page.
In short, the 2 dashboard panels display entirely, simply the 2nd one does not show all its content while displayed in the main page.
Is there a solution for this?
Thanks by advance

Project with profit center was not created for entire period

Hi everybody,
I need a help with a problem here.
The alert mesage "project with profit center was not created for entire period" was displayed.
Then I searched for the creation dates and the profit center was created before the project gets its firsts postings. Therefore, some line itens don't exist in profit center (ledgers).
My two questions:
The first one, is it possible to input line itens in a retroactive way?
Everytime I need to use the project master data this alert is displayed. How can I fix avoid this message?
Thanks,

Hi,
Regarding your issue, it is theoretically possible to reverse all settlements up to the start of the project and then to settle again it
is a must to check in standard if the profit center is valid from the project start date onwards.
Check the attached note 1048945.
The system generates error message KM700 ('Profit center <PRCTR> does not exist for <date>') when you enter a profit center on a project definition if the profit center is not valid in the entire period between the basic start and the basic finish date of the project definition . However, only one warning message should only be generated in this case.
regards
Waman

.pdf does not render correctly

Hello everyone:
When creating a .pdf from a .html dreamweaver file it does not render properly. Headings go to the left and sidebar images do not display properly. Any ideas as to how to fix this. Using Adode Acrobat 8 Professional and Adobe Dreamweaver CS3. Many Thanks

Take a screenshot of the page then convert that to a PDF.
The PrtScr key on the keyboard only captures what you can see on screen (or the active window).
To get the entire page, either use something like SnagIt (commercial) or use one of the free add-ons for Firefox.
Edit: or as Paula suggests, create a print stylesheet.
http://www.alistapart.com/articles/goingtoprint/
Message was edited by: John Waller

Imovie will not render photos with ken burns effect

I have started to produce a video and have tried to import photos from both iphotos and straight from desktop however when i do this the red bar showing the state of rendering does not move. The photo will not render and therfor i am unable to use the ken burns effect. Could anyone please give me any idea of what i am doing wrong.
Thanks.

Hi
What file type is Your photos eg .tiff, .pict or .jpg ?
What size are they eg 1Mb, 10Mb or 100Mb ?
How much free space is there on Your internal (start-up) hard disc ?
Ps When ready - Don't use Share/Export to iDVD from within iMovie. Just drop Your movie icon
(with a Star on it) into iDVD theme window.
OR - Your movie project in iMovie will be harmed and You'll have to re-do it ! ! AND
the DVD disc will be severely pixelated - extreme low quality Ds
Yours Bengt W

Red Timeline box. Not render line entire timeline box turns red

Similar Messages

Maybe you are looking for