Redaing an XML file to an internal table

hi ,
I want to import an XML file in an interface program for ABAP. I was looking for an optimal method of parsing and reading the XML data to an intrenal table so that I can display errors corresponding to invidual records.
Sangeet

Hai Sangeeta
go through the following Code
This program exports an internal table to an XML file.
Report ZPRUEBA_MML_13 *
Export an internal table to XML document *
NO BORRAR ESTE CODIGO *
REPORT ZPRUEBA_MML_13.
PANTALLA SELECCION *
    PARAMETERS: GK_RUTA TYPE RLGRAP-FILENAME.
PANTALLA SELECCION *
TYPE TURNOS *
TYPES: BEGIN OF TURNOS,
    LU LIKE T552A-TPR01,
    MA LIKE T552A-TPR01,
    MI LIKE T552A-TPR01,
    JU LIKE T552A-TPR01,
    VI LIKE T552A-TPR01,
    SA LIKE T552A-TPR01,
    DO LIKE T552A-TPR01,
END OF TURNOS.
TYPE TURNOS *
TYPE SOCIO *
TYPES: BEGIN OF SOCIO,
    NUMERO LIKE PERNR-PERNR,
    REPOSICION LIKE PA0050-ZAUVE,
    NOMBRE LIKE PA0002-VORNA,
    TURNOS TYPE TURNOS,
END OF SOCIO.
TYPE SOCIO *
ESTRUCTURA ACCESOS *
DATA: BEGIN OF ACCESOS OCCURS 0,
    SOCIO TYPE SOCIO,
END OF ACCESOS.
ESTRUCTURA ACCESOS *
START OF SELECTION *
START-OF-SELECTION.
    PERFORM LLENA_ACCESOS.
    PERFORM DESCARGA_XML.
END-OF-SELECTION.
END OF SELECTION *
FORM LLENA_ACCESOS *
FORM LLENA_ACCESOS.
REFRESH ACCESOS.
CLEAR ACCESOS.
MOVE: '45050' TO ACCESOS-SOCIO-NUMERO,
              'MOISES MORENO' TO ACCESOS-SOCIO-NOMBRE,
              '0' TO ACCESOS-SOCIO-REPOSICION,
              'T1' TO ACCESOS-SOCIO-TURNOS-LU,
              'T2' TO ACCESOS-SOCIO-TURNOS-MA,
              'T3' TO ACCESOS-SOCIO-TURNOS-MI,
              'T4' TO ACCESOS-SOCIO-TURNOS-JU,
              'T5' TO ACCESOS-SOCIO-TURNOS-VI,
              'T6' TO ACCESOS-SOCIO-TURNOS-SA,
              'T7' TO ACCESOS-SOCIO-TURNOS-DO.
APPEND ACCESOS.
CLEAR ACCESOS.
MOVE: '45051' TO ACCESOS-SOCIO-NUMERO,
              'RUTH PEÑA' TO ACCESOS-SOCIO-NOMBRE,
              '0' TO ACCESOS-SOCIO-REPOSICION,
              'T1' TO ACCESOS-SOCIO-TURNOS-LU,
              'T2' TO ACCESOS-SOCIO-TURNOS-MA,
              'T3' TO ACCESOS-SOCIO-TURNOS-MI,
              'T4' TO ACCESOS-SOCIO-TURNOS-JU,
              'T5' TO ACCESOS-SOCIO-TURNOS-VI,
              'T6' TO ACCESOS-SOCIO-TURNOS-SA,
              'T7' TO ACCESOS-SOCIO-TURNOS-DO.
APPEND ACCESOS.
ENDFORM.
FORM LLENA_ACCESOS *
FORM DESCARGA_XML *
FORM DESCARGA_XML.
DATA: L_DOM TYPE REF TO IF_IXML_ELEMENT,
              M_DOCUMENT TYPE REF TO IF_IXML_DOCUMENT,
              G_IXML TYPE REF TO IF_IXML,
              W_STRING TYPE XSTRING,
              W_SIZE TYPE I,
              W_RESULT TYPE I,
              W_LINE TYPE STRING,
              IT_XML TYPE DCXMLLINES,
              S_XML LIKE LINE OF IT_XML,
              W_RC LIKE SY-SUBRC.
DATA: XML TYPE DCXMLLINES.
DATA: RC TYPE SY-SUBRC,
BEGIN OF XML_TAB OCCURS 0,
              D LIKE LINE OF XML,
END OF XML_TAB.
CLASS CL_IXML DEFINITION LOAD.
G_IXML = CL_IXML=>CREATE( ).
CHECK NOT G_IXML IS INITIAL.
M_DOCUMENT = G_IXML->CREATE_DOCUMENT( ).
CHECK NOT M_DOCUMENT IS INITIAL.
WRITE: / 'Converting DATA TO DOM 1:'.
CALL FUNCTION 'SDIXML_DATA_TO_DOM'
EXPORTING
              NAME = 'ACCESOS'
              DATAOBJECT = ACCESOS[]
IMPORTING
              DATA_AS_DOM = L_DOM
CHANGING
              DOCUMENT = M_DOCUMENT
EXCEPTIONS
              ILLEGAL_NAME = 1
              OTHERS = 2.
IF SY-SUBRC = 0.
              WRITE 'Ok'.
ELSE.
              WRITE: 'Err =',
              SY-SUBRC.
ENDIF.
CHECK NOT L_DOM IS INITIAL.
W_RC = M_DOCUMENT->APPEND_CHILD( NEW_CHILD = L_DOM ).
IF W_RC IS INITIAL.
              WRITE 'Ok'.
ELSE.
              WRITE: 'Err =',
              W_RC.
ENDIF.
CALL FUNCTION 'SDIXML_DOM_TO_XML'
EXPORTING
              DOCUMENT = M_DOCUMENT
IMPORTING
              XML_AS_STRING = W_STRING
              SIZE = W_SIZE
TABLES
              XML_AS_TABLE = IT_XML
EXCEPTIONS
              NO_DOCUMENT = 1
              OTHERS = 2.
IF SY-SUBRC = 0.
              WRITE 'Ok'.
ELSE.
              WRITE: 'Err =',
              SY-SUBRC.
ENDIF.
LOOP AT IT_XML INTO XML_TAB-D.
              APPEND XML_TAB.
ENDLOOP.
CALL FUNCTION 'WS_DOWNLOAD'
EXPORTING
              BIN_FILESIZE = W_SIZE
              FILENAME = GK_RUTA
              FILETYPE = 'BIN'
TABLES
              DATA_TAB = XML_TAB
EXCEPTIONS
              OTHERS = 10.
IF SY-SUBRC <> 0.
              MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
              WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
ENDFORM.
FORM DESCARGA_XML *
Thanks & regards
Sreenivasulu P

Similar Messages

  • Upload an XML file into the Internal table

    Hi Guys,
    I want to know, how to upload an xml file into the Internal table through ABAP programming

    you just wanted to load the xml file into internal table (as a table of binary strings)or load the xml data mapped to itab row columns
    for the first one you can simply use gui_upload
    and for the second one you need to load the xml file using gui_upload and use XLST program to transform into an itab
    Regards
    Raja

  • Collect data from a dynamic XML file into multiple internal tables

    I need to convert the XML file into multiple internal tables. I tried many links and posts in SDN but still was facing difficulty in achieving this. Can some one tell me where I am going wrong.
    My XML file is of the following type.It is very complex and the dynamice.
    The following tags occur more than once in the XML file. The "I" and "L" tags and its child tags can occur ones or more than once for each XML file and it is not constant. i.e in one file they can occur 1 time and in another they can occur 100 times.
    "I" and "L" are child tags of <C>
    <I>
           <J>10</J>
             <K>EN</K>
      </I>
    <L>
             <J>20</J>
              <N>BB</N>
      </L>
    Tags <C> and <F> occur only ones for each XML file. <C> is the child tag of "A" and "F" is the child tag of <C>.
    I need to collect <D>, <E> in one internal table ITAB.
    I need to collect <G>, <H> in one internal table JTAB.
    I need to collect <J>, <K> in one internal table KTAB.
    I need to collect <J>, <N> in one internal table PTAB.
    Below is the complete XML file.
    ?xml version="1.0" encoding="iso-8859-1" ?>
    <A>
        <B/>
        <C>
           <D>RED</D>
           <E>999</E>
        <F>
           <G>TRACK</G>
           <H>PACK</H>
        </F>
        <I>
           <J>10</J>
           <K>EN</K>
        </I>
        <I>
           <J>20</J>
           <K>TN</K>
        </I>
        <I>
           <J>30</J>
           <K>KN</K>
        </I>
        <L>
           <J>10</J>
           <N>AA</N>
        </L>
        <L>
           <J>20</J>
           <N>BB</N>
        </L>
        <L>
           <J>30</J>
           <N>CC</N>
        </L>
        </C>
      </A>
    With the help of SDN I am able to gather the values of <D> <E> in one internal table.
    Now if I need to gather
    <G>, <H> in one internal table JTAB.
    <J>, <K> in one internal table KTAB.
    <J>, <N> in one internal table PTAB.
    I am unable to do. I am following  XSLT transformation method. If some one has some suggestions. Please help.
    Here is my ABAP program
    TYPE-POOLS abap.
    CONSTANTS gs_file TYPE string VALUE 'C:\TEMP\ABCD.xml'.
    * This is the structure for the data from the XML file
    TYPES: BEGIN OF ITAB,
             D(10) TYPE C,
             E(10) TYPE C,
           END OF ITAB.
    * Table for the XML content
    DATA: gt_itab       TYPE STANDARD TABLE OF char2048.
    * Table and work ares for the data from the XML file
    DATA: gt_ITAB     TYPE STANDARD TABLE OF ts_ITAB,
          gs_ITAB     TYPE ts_ITAB.
    * Result table that contains references
    * of the internal tables to be filled
    DATA: gt_result_xml TYPE abap_trans_resbind_tab,
          gs_result_xml TYPE abap_trans_resbind.
    * For error handling
    DATA: gs_rif_ex     TYPE REF TO cx_root,
          gs_var_text   TYPE string.
    * Get the XML file from your client
    CALL METHOD cl_gui_frontend_services=>gui_upload
      EXPORTING
        filename                = gs_file
      CHANGING
        data_tab                = gt_itab1
      EXCEPTIONS
        file_open_error         = 1
        file_read_error         = 2
        no_batch                = 3
        gui_refuse_filetransfer = 4
        invalid_type            = 5
        no_authority            = 6
        unknown_error           = 7
        bad_data_format         = 8
        header_not_allowed      = 9
        separator_not_allowed   = 10
        header_too_long         = 11
        unknown_dp_error        = 12
        access_denied           = 13
        dp_out_of_memory        = 14
        disk_full               = 15
        dp_timeout              = 16
        not_supported_by_gui    = 17
        error_no_gui            = 18
        OTHERS                  = 19.
    IF sy-subrc <> 0.
      MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
              WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
    ENDIF.
    * Fill the result table with a reference to the data table.
    * Within the XSLT stylesheet, the data table can be accessed with
    * "IITAB".
    GET REFERENCE OF gt_shipment INTO gs_result_xml-value.
    gs_result_xml-name = 'IITAB'.
    APPEND gs_result_xml TO gt_result_xml.
    * Perform the XSLT stylesheet
    TRY.
        CALL TRANSFORMATION zxslt
        SOURCE XML gt_itab1
        RESULT (gt_result_xml).
      CATCH cx_root INTO gs_rif_ex.
        gs_var_text = gs_rif_ex->get_text( ).
        MESSAGE gs_var_text TYPE 'E'.
    ENDTRY.
    * Now let's see what we got from the file
    LOOP AT gt_ITAB INTO gs_ITAB.
      WRITE: / 'D:', gs_ITAB-D.
      WRITE: / 'E :', gs_ITAB-E.
    ENDLOOP.
    Transformation
    <xsl:transform xmlns:xsl="http://www.w3.org/1999/XSL/Transform" version="1.0">
      <xsl:output encoding="iso-8859-1" indent="yes" method="xml" version="1.0"/>
      <xsl:strip-space elements="*"/>
      <xsl:template match="/">
        <asx:abap xmlns:asx="http://www.sap.com/abapxml" version="1.0">
          <asx:values>
            <IITAB>
              <xsl:apply-templates select="//C"/>
            </IITAB>
          </asx:values>
        </asx:abap>
      </xsl:template>
      <item>
          <D>
            <xsl:value-of select="D"/>
          </D>
          <E>
            <xsl:value-of select="E"/>
          </E>
        </item>
      </xsl:template>
    </xsl:transform>
    Now the above pgm and transformation work well and I am able to extract data into the ITAB. Now what changes should I make in transformation and in pgm to collect
    <G>, <H> in one internal table JTAB.
    <J>, <K> in one internal table KTAB.
    <J>, <N> in one internal table PTAB.
    Please help..i am really tring hard to figure this out. I am found lot of threads addressing this issue but not my problem.
    Kindly help.
    Regards,
    VS

    Hi Rammohan,
    Thanks for the effort!
    But I don't need to use GUI upload because my functionality does not require to fetch data from presentation server.
    Moreover, the split command advised by you contains separate fields...f1, f2, f3... and I cannot use it because I have 164 fields.  I will have to split into 164 fields and assign the values back to 164 fields in the work area/header line.
    Moreover I have about 10 such work areas.  so the effort would be ten times the above effort! I want to avoid this! Please help!
    I would be very grateful if you could provide an alternative solution.
    Thanks once again,
    Best Regards,
    Vinod.V

  • Reading XML file to ABAP internal table

    Hi all,
    Iam trying to convert a XLM file into abap internal table , am using XSLT transformation to parse the XML file and i am using "CALL METHOD cl_gui_frontend_services=>gui_upload" for reading the XML file.
    below is the XML file.
    ===========================================================================
    - <PIXBridge version="2.2" timestamp="2003-04-09T15:27:00">
    - <PIX>
      <TransactionType>605</TransactionType>
      <TransactionCode>98</TransactionCode>
      <TransactionNumber>6888965</TransactionNumber>
      <SequenceNumber>40001</SequenceNumber>
    - <SKUDefinition>
      <Company>GZL</Company>
      <Division>BMD</Division>
      <Season />
      <SeasonYear />
      <Style>ORT002A</Style>
      <StyleSuffix />
      <Color>K13</Color>
      <ColorSuffix />
      <SecDimension />
      <Quality />
      <SizeRangeCode />
      <SizeDesc>M</SizeDesc>
      <SkuID>200140577</SkuID>
      </SKUDefinition>
      </PIX>
      </PIXBridge>
    =================================================================
    and my Transformation code is as below
    <xsl:transform xmlns:xsl="http://www.w3.org/1999/XSL/Transform" version="1.0">
      <xsl:output encoding="iso-8859-1" indent="yes" method="xml" version="1.0"/>
      <xsl:strip-space elements="*"/>
      <xsl:template match="/">
        <asx:abap xmlns:asx="http://www.sap.com/abapxml" version="1.0">
          <asx:values>
            <IPIX>
              <xsl:apply-templates select="//PIX"/>
            </IPIX>
          </asx:values>
        </asx:abap>
      </xsl:template>
      <xsl:template match="PIX">
        <item>
          <TRANSACTIONTYPE>
            <xsl:value-of select="TransactionType"/>
          </TRANSACTIONTYPE>
          <TRANSACTIONCODE>
            <xsl:value-of select="TransactionCode"/>
          </TRANSACTIONCODE>
          <TRANSACTIONNUMBER>
            <xsl:value-of select="TransactionNumber"/>
          </TRANSACTIONNUMBER>
          <SEQUENCENUMBER>
            <xsl:value-of select="SequenceNumber"/>
          </SEQUENCENUMBER>
          <SKUDEFINITION>
            <COMPANY>
              <xsl:value-of select="Company"/>
            </COMPANY>
            <DIVISION>
              <xsl:value-of select="Division"/>
            </DIVISION>
            <SEASON/>
            <SEASONYEAR/>
            <STYLE>
              <xsl:value-of select="Style"/>
            </STYLE>
            <STYLESUFFIX/>
            <COLOR>
            <xsl:value-of select="Color"/>
            </COLOR>
            <COLORSUFFIX/>
            <SECDIMENSION/>
            <QUANTITY/>
            <SIZERANGECODE/>
            <SIZEDESC>
              <xsl:value-of select="SizeDesc"/>
            </SIZEDESC>
            <SKUID>
              <xsl:value-of select="SkuID"/>
            </SKUID>
          </SKUDEFINITION>
          </item>
        </xsl:template>
    When i run my program i am getting the values only till the sequence number part and im not getting any values  that is read in between <SKUDEFINITION> ..... </SKUDEFINITION>
    I need help to sort this , kindly help me in this.
    regs,
    raja

    I am not able to get a clue out of that, can Get Durairaj Athavan Raja in to loop for sorting this out.
    I made changes to my transformation program , but still not getting the output of the components inside the
    <SKUDefinition> , but when i debug  the transformation i can able to see the output values for those components but when i get the values in the result table im not getting values of those components.
    <xsl:transform xmlns:xsl="http://www.w3.org/1999/XSL/Transform" version="1.0">
      <xsl:output encoding="iso-8859-1" indent="yes" method="xml" version="1.0"/>
      <xsl:strip-space elements="*"/>
      <xsl:template match="/">
        <asx:abap xmlns:asx="http://www.sap.com/abapxml" version="1.0">
          <asx:values>
            <IPIX>
              <xsl:apply-templates select="//PIX"/>
            </IPIX>
          </asx:values>
        </asx:abap>
      </xsl:template>
      <xsl:template match="PIX">
        <item>
          <TRANSACTIONTYPE>
            <xsl:value-of select="TransactionType"/>
          </TRANSACTIONTYPE>
          <TRANSACTIONCODE>
            <xsl:value-of select="TransactionCode"/>
          </TRANSACTIONCODE>
          <TRANSACTIONNUMBER>
            <xsl:value-of select="TransactionNumber"/>
          </TRANSACTIONNUMBER>
          <SEQUENCENUMBER>
            <xsl:value-of select="SequenceNumber"/>
          </SEQUENCENUMBER>
          <xsl:for-each select="SKUDefinition">
          <SKUDEFINITION>
          <COMPANY>
              <xsl:value-of select="Company"/>
          </COMPANY>
          <DIVISION>
              <xsl:value-of select="Division"/>
          </DIVISION>
          <SEASON/>
          <SEASONYEAR/>
          <STYLE>
            <xsl:value-of select="Style"/>
          </STYLE>
          <STYLESUFFIX/>
          <COLOR>
            <xsl:value-of select="Color"/>
          </COLOR>
          <COLORSUFFIX/>
          <SECDIMENSION/>
          <QUANTITY/>
          <SIZERANGECODE/>
          <SIZEDESC>
              <xsl:value-of select="SizeDesc"/>
          </SIZEDESC>
          <SKUID>
              <xsl:value-of select="SkuID"/>
          </SKUID>
          </SKUDEFINITION>
          </xsl:for-each>
        </item>
      </xsl:template>
    </xsl:transform>
    ==================
    Below is my main program
    ===================
    TYPE-POOLS abap.
    CONSTANTS gs_file TYPE string VALUE 'C:\XMLABAP1.xml'.
    This is the structure for the data from the XML file
    TYPES: BEGIN OF ty_text,
             TransactionType(3) type n,
             TransactionCode(2) type n,
             TransactionNumber(7) type n,
             SequenceNumber(5) type n,
             Company(3) type c,
             Division(3) type c,
             Season(3) type c,
             SeasonYear(4) type c,
             Style(8) type c,
             Color(3) type c,
             SecDimension(3) type c,
             Quality(3) type n,
             SizeRangeCode(2) type c,
             SizeDesc(1) type c,
             SkuID(10) type c,
           END OF ty_text.
    Table for the XML content
    DATA: gt_itab       TYPE STANDARD TABLE OF char2048.
    data: xmlstr        TYPE XSTRING.
    Table and work ares for the data from the XML file
    DATA: gt_person     TYPE STANDARD TABLE OF ty_text,
          gs_person     TYPE ty_text.
    Result table that contains references
    of the internal tables to be filled
    DATA: gt_result_xml TYPE abap_trans_resbind_tab,
          gs_result_xml TYPE abap_trans_resbind.
    For error handling
    DATA: gs_rif_ex     TYPE REF TO cx_root,
          gs_var_text   TYPE string.
    Get the XML file from your client
    CALL METHOD cl_gui_frontend_services=>gui_upload
      EXPORTING
        filename                = gs_file
      CHANGING
        data_tab                = gt_itab
      EXCEPTIONS
        file_open_error         = 1
        file_read_error         = 2
        no_batch                = 3
        gui_refuse_filetransfer = 4
        invalid_type            = 5
        no_authority            = 6
        unknown_error           = 7
        bad_data_format         = 8
        header_not_allowed      = 9
        separator_not_allowed   = 10
        header_too_long         = 11
        unknown_dp_error        = 12
        access_denied           = 13
        dp_out_of_memory        = 14
        disk_full               = 15
        dp_timeout              = 16
        not_supported_by_gui    = 17
        error_no_gui            = 18
        OTHERS                  = 19.
    IF sy-subrc <> 0.
      MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
              WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
    ENDIF.
    Fill the result table with a reference to the data table.
    Within the XSLT stylesheet, the data table can be accessed with
    "IPERSON".
    GET REFERENCE OF gt_person INTO gs_result_xml-value.
    gs_result_xml-name = 'IPIX'.
    APPEND gs_result_xml TO gt_result_xml.
    Perform the XSLT stylesheet
    TRY.
        CALL TRANSFORMATION ZAUM_MANH_SYNC_RPT
        SOURCE XML XMLSTR
        RESULT (gt_result_xml).
      CATCH cx_root INTO gs_rif_ex.
        gs_var_text = gs_rif_ex->get_text( ).
        MESSAGE gs_var_text TYPE 'E'.
    ENDTRY.
    Now let's see what we got from the file
    LOOP AT gt_person INTO gs_person.
    WRITE: / 'Transaction Type:', gs_person-TransactionType.
      WRITE: / 'Transaction Code :', gs_person-TransactionCode.
      WRITE: / 'Transaction Number :', gs_person-TransactionNumber.
       WRITE: / 'SequenceNumber :', gs_person-SequenceNumber.
       WRITE: / 'Company : ', gs_person-Company.
      WRITE : /.
    ENDLOOP. "gt_person.

  • Read data from xml files and  populate internal table

    Hi.
    How to read data from xml files into internal tables?
    Can u tell me the classes and methods to read xml data..
    Can u  explain it with a sample program...

    <pre>DATA itab_accontextdir TYPE TABLE OF ACCONTEXTDIR.
    DATA struct_accontextdir LIKE LINE OF itab_accontextdir.
    DATA l_o_error TYPE REF TO cx_root.
    DATA: filename type string ,
                 xmldata type xstring .
    DATA: mr      TYPE REF TO if_mr_api.
    mr = cl_mime_repository_api=>get_api( ).
    mr->get( EXPORTING  i_url     = 'SAP/PUBLIC/BC/xml_files_accontext/xml_accontextdir.xml'
                  IMPORTING  e_content = xmldata ).
    WRITE xmldata.
    TRY.
    CALL TRANSFORMATION id
          SOURCE XML xmldata
          RESULT shiva = itab_accontextdir.
      CATCH cx_root INTO l_o_error.
    ENDTRY.
    LOOP AT itab_accontextdir INTO struct_accontextdir.
        WRITE: / struct_accontextdir-context_id,
               struct_accontextdir-context_name,
               struct_accontextdir-context_type.
        NEW-LINE.
        ENDLOOP.</pre>
    <br/>
    Description:   
    In the above code snippet I am storing the data in an xml file(you know xml is used to store and transport data ) called 'xml_accontextdir.xml' that is uploaded into the MIME repository at path 'SAP/PUBLIC/BC/xml_files_accontext/xml_accontextdir.xml'.
    The below API is used to read a file in MIME repo and convert it into a string that is stored in ' xmldata'. (This is just a raw data that is got by appending the each line of  xml file).
    mr = cl_mime_repository_api=>get_api( ).
    mr->get( EXPORTING  i_url     = 'SAP/PUBLIC/BC/xml_files_accontext/xml_accontextdir.xml'
                  IMPORTING  e_content = xmldata ).
        Once the 'xmldata' string is available we use the tranformation to parse the xml string that we have got from the above API and convert it into the internal table.
    <pre>TRY.
    CALL TRANSFORMATION id
          SOURCE XML xmldata
          RESULT shiva = itab_accontextdir.
      CATCH cx_root INTO l_o_error.
    ENDTRY.</pre>
    Here the trasnsformation 'id ' is used to conververt the source xml 'xmldata' to resulting internal table itab_accontextdir, that have same structure as our xml file 'xml_accontextdir.xml'.  In the RESULT root of the xml file has to be specified. (In my the root is 'shiva'). 
    Things to be taken care:
    One of the major problem that occurs when reading the xml file is 'format not compatible with the internal table' that you are reading into internal table.  Iin order to get rid of this issue use one more tranformation to convert the data from the internal table into the xml file.    
    <pre>TRY.
          CALL TRANSFORMATION id
            SOURCE shiv = t_internal_tab
            RESULT XML xml.
        CATCH cx_root INTO l_o_error.
      ENDTRY.
      WRITE xml.
      NEW-LINE.</pre>
    <br/>
    This is the same transformation that we used above but the differnce is that the SOURCE and RESULT parameters are changed the source is now the internal table and result is *xml *string. Use xml browser that is available with the ABAP workbench to read the xml string displayed with proper indentation. In this way we get the format of xml file to be used that is compatable with the given internal table. 
    Thank you, Hope this will help you!!!
    Edited by: Shiva Prasad L on Jun 15, 2009 7:30 AM
    Edited by: Shiva Prasad L on Jun 15, 2009 11:56 AM
    Edited by: Shiva Prasad L on Jun 15, 2009 12:06 PM

  • Upload XML file data into internal table

    Hi,
    I need help from you.
    I am uploading XML file from Application server.
    1.In application server under directory it may have several XML files and i need to upload all the XML files  when we gave only directory name. So, what is the function module for that logic . If possible code also.
    2.Once we get the files into some internal table we need to upload data from that files to internal table.
    So what is the logic for that , if possible code also.
    I am giving sample directory:    
    For example in this directory assume 3 xml files are there.
    I need to upload those files and data from that in to internal table.
    Thanks & Regards
    VSR

    Below code will give you an idea.
    TYPE-POOLS: ixml. "iXML Library Types
    *TABLES : rbkp.
    TYPE DECLERATIION
    TYPES: BEGIN OF type_tabpo,
    ebeln TYPE ekko-ebeln, "PO document number
    ebelp TYPE ekpo-ebelp, "PO line item
    END OF type_tabpo.
    TYPES: BEGIN OF type_ekbe,
    belnr TYPE rbkp-belnr, "Invoice document
    gjahr TYPE rbkp-gjahr, "fiscal year
    END OF type_ekbe.
    TYPES: BEGIN OF type_invoice,
    belnr TYPE rbkp-belnr, "PO document number
    gjahr TYPE rbkp-gjahr, "Fiscal Year
    rbstat TYPE rbkp-rbstat, "invoice status
    END OF type_invoice.
    TYPES: BEGIN OF t_xml_line, "Structure for holding XML data
    data(256) TYPE x,
    END OF t_xml_line.
    INTERNAL TABLE DECLERATIION
    DATA: gi_tabpo TYPE STANDARD TABLE OF type_tabpo,
    gi_ekbe TYPE STANDARD TABLE OF type_ekbe,
    gi_invoice TYPE STANDARD TABLE OF type_invoice,
    gi_bapiret2 TYPE STANDARD TABLE OF bapiret2.
    DATA: l_ixml TYPE REF TO if_ixml,
    l_streamfactory TYPE REF TO if_ixml_stream_factory.
    DATA: l_xml_table TYPE TABLE OF t_xml_line, " XML Table of the structure
    l_xml_line TYPE t_xml_line, " Record of structure t_xml_line
    l_xml_table_size TYPE i. " XML table size
    DATA: l_filename TYPE string.
    WORK AREA DECLARATION
    DATA: gw_tabpo TYPE type_tabpo,
    gw_ekbe TYPE type_ekbe,
    gw_invoice TYPE type_invoice,
    gw_bapiret2 TYPE bapiret2.
    BEGIN OF SELECTION SCREEN
    SELECTION-SCREEN BEGIN OF BLOCK blk1 WITH FRAME TITLE text-001.
    PARAMETERS: p_file TYPE pathintern LOWER CASE DEFAULT '/usr/sap/tmp/'.
    Validation of XML file: Only DTD included in XML document is supported
    SELECTION-SCREEN END OF BLOCK blk1.
    SELECTION SCREEN VALIDATION
    AT SELECTION-SCREEN.
    To validate p_file is not initial
    PERFORM sub_validate_file.
    PERFORM sub_validate_path.
    AT SELECTION-SCREEN ON VALUE-REQUEST FOR p_file.
    Request for filename for xml file from the application server
    PERFORM sub_get_filename_appl USING p_file.
    START OF SELECTION SCREEN
    START-OF-SELECTION.
    PERFORM sub_fetch_po_details.
    PERFORM sub_get_invoice.
    PERFORM sub_rel_invoice.
    END OF SELECTION SCREEN
    END-OF-SELECTION.
    *& Form sub_validate_file
    To Validate the file
    FORM sub_validate_file .
    IF p_file IS INITIAL.
    MESSAGE e000. "specify the file path
    ENDIF.
    ENDFORM. " sub_validate_file
    *& Form sub_get_filename_appl
    form sub_get_filename_appl USING l_fname TYPE any.
    DATA: l_fname TYPE filename-fileintern. " File name
    *GET THE FILENAME FROM THE APPLICATION SERVER
    CALL FUNCTION '/SAPDMC/LSM_F4_SERVER_FILE'
    EXPORTING
    directory = l_fname
    filemask = '*'
    IMPORTING
    serverfile = l_fname
    EXCEPTIONS
    canceled_by_user = 1
    OTHERS = 2.
    IF sy-subrc 0.
    MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
    WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
    ENDIF.
    ENDFORM. " sub_get_filename_appl
    *& Form sub_fetch_po_details
    To fetch the PO details from the application server
    Format of file is XML
    FORM sub_fetch_po_details .
    TYPE DECLERATIION
    l_ixml = cl_ixml=>create( ).
    Creating a stream factory
    l_streamfactory = l_ixml->create_stream_factory( ).
    PERFORM get_xml_table.
    LOOP AT gi_tabpo INTO gw_tabpo.
    WRITE:/ gw_tabpo.
    ENDLOOP.
    ENDFORM. " sub_fetch_po_details
    *& Form get_xml_table
    Read from the xml file
    FORM get_xml_table .
    Local variable declarations
    DATA: l_len TYPE i,
    l_len2 TYPE i,
    l_tab TYPE tsfixml,
    l_content TYPE string,
    l_str1 TYPE string,
    c_conv TYPE REF TO cl_abap_conv_in_ce,
    l_itab TYPE TABLE OF string.
    l_filename = p_file.
    code to upload data from application server
    OPEN DATASET l_filename FOR INPUT IN BINARY MODE.
    IF sy-subrc 0.
    WRITE:/ 'invalid file path'.
    ENDIF.
    DO.
    READ DATASET l_filename INTO l_xml_line.
    IF sy-subrc EQ 0.
    APPEND l_xml_line TO l_xml_table.
    ELSE.
    EXIT.
    ENDIF.
    ENDDO.
    CLOSE DATASET l_filename.
    code to find the table size
    DESCRIBE TABLE l_xml_table.
    l_xml_table_size = ( sy-tleng ) * ( sy-tfill ).
    *code to convert hexadecimal to XML
    LOOP AT l_xml_table INTO l_xml_line.
    c_conv = cl_abap_conv_in_ce=>create( input = l_xml_line-data
    replacement
    = space ).
    c_conv->read( IMPORTING data = l_content len = l_len ).
    CONCATENATE l_str1 l_content INTO l_str1.
    ENDLOOP.
    l_str1 = l_str1+0(l_xml_table_size).
    SPLIT l_str1 AT cl_abap_char_utilities=>cr_lf INTO TABLE l_itab.
    LOOP AT l_itab INTO l_str1.
    REPLACE ALL OCCURRENCES OF cl_abap_char_utilities=>horizontal_tab IN
    l_str1 WITH space.
    ENDLOOP.
    CALL TRANSFORMATION ('ID') " code to put in internal table
    SOURCE XML l_str1
    RESULT tab = gi_tabpo[].
    ENDFORM. " get_xml_table

  • Creating XML file from ABAP internal table data....

    Hello,
    I am fethcing data froma  custom table and I have to write data in XMl format. Following is the XML format in which I want data. Is there any function module iN SAP which will help me in writing data from internal table to XML file ?
    <batch>
      <invoice>
        <StatusCode>10</StatusCode>
        <paymentamount>122.00</paymentamount>
         <ReferenceNumber>70980934</ReferenceNumber>
      </invoice>
      <invoice>
         <StatusCode>90</StatusCode>
        <paymentamount>122.00</paymentamount>
         <ReferenceNumber>70980934</ReferenceNumber>
      </invoice>
      <control>
        <InvoiceCount>2</InvoiceCount>
      </control>
    </batch>
    Please help.
    Regards,
    Jainam.

    I suggest you look into "simple transformations". That's SAP's most recent technology for such purposes, as far as I know.
    http://help.sap.com/abapdocu_70/en/ABENABAP_ST.htm
    Thomas

  • How to convert XML file to an internal table ?

    Hi All,
    I want to do a batch input program. The source data would be given as an excel file . I would like to know how to convert XML file to internal table properly. Please help me out..
    Thanking you in advance ..
    Shankara Narayanan T.V

    Hi Shankar,
    use 'ALSM_EXCEL_TO_INTERNAL_TABLE' FM.
      CALL FUNCTION 'ALSM_EXCEL_TO_INTERNAL_TABLE'
             EXPORTING
                  filename                = p_file1
                  i_begin_col             = '1'
                  i_begin_row             = '5'
                  i_end_col               = '40'
                  i_end_row               = '16'
             TABLES
                  intern                  = it_intern
             EXCEPTIONS
                  inconsistent_parameters = 1
                  upload_ole              = 2
                  OTHERS                  = 3.
        IF sy-subrc <> 0.
    MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
            WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
        ENDIF.
    LOOP AT it_intern.
          AT NEW row.
            CLEAR it_intern.
          ENDAT.
            CASE lv_flag.
        Production Version
              WHEN  1.
                it_master-matnr      =   it_intern-value.     
              WHEN  2.
                it_master-werks      = it_intern-value.
              WHEN  3.
                it_master-verid      = it_intern-value.
              WHEN  4.
                it_master-text1      = it_intern-value.
              WHEN  5.
                it_master-fdate     = it_intern-value.
          AT END OF row.
            APPEND it_master.
          ENDAT.
        ENDLOOP.
    -Anu
    Message was edited by:
            Anupama Reddy

  • How to upload XML file into the internal table in Webdynpro  ABAP ?

    Hi Friends,
    I am not able to upload the XML file into ABAP,can you please help me in solving this issue with the help of source code.
    Regards
    Dinesh

    Hi Dinesh,
    Try go through this program which I had developed earlier. It takes as input an XML file and then breaks it down into name-value pairs of an intrnal table. You need to pass an XML file as input to this program. (I had hard coded the path for my XML file in it. You need to replace it with 1 of your own or you can just delete it and use the browse button to selet the file on your PC)
    Regards,
    Uday
    REPORT  ZUDAY_XML no standard page heading.
    " Internal table to store the XML file in binary mode
    data: begin of it_xml occurs 1,
            c(255) type x,
          end of it_xml,
    " Name-value pairs table rturned by FM SMUM_XML_PARSE
          it_SMUM_XMLTB type SMUM_XMLTB occurs 0 with header line,
    " Table returned by FM SMUM_XML_PARSE for error handling
          it_bapiret2 type bapiret2 occurs 0 with header line.
    " XSTRING variable to be used by FM SCMS_BINARY_TO_XSTRING to hold the XML file in XSTRING format
    data: I_xstring type xstring, 
    " String variable to hold XML file path to pass to GUI_UPLOAD
          I_file_path type string,
    " Variable to store the size of the uploaded binary XML file
          I_LENGTH TYPE I VALUE 0.
    parameters: P_path type IBIPPARMS-PATH default 'C:\Documents and Settings\c5104398\Desktop\flights.xml'.
    " Get the XML file path from the user
    at selection-screen on value-request for P_path.
      CALL FUNCTION 'F4_FILENAME'
        IMPORTING
          FILE_NAME = P_PATH.

  • Code to transfer xml file to abap internal table using transformation

    Hi friends
    Given the following xml file .the requirementis to  display and transfer the xml file to internal table usin transformation and gui_upload.If any onehaving simple code on this please send .
    Can any one sugest the steps to be followed to write source code using simple transformation.
    <?xml version="1.0" encoding="utf-8" ?>
    - <Negara>
    - <item>
    - <COUNTRY>
      <MANDT>600</MANDT>
      <ZCODE>500</ZCODE>
      <ZDESC>Pening Lalat</ZDESC>
      <ZSAPCD>T1</ZSAPCD>
      </COUNTRY>
      </item>
    - <item>
    - <COUNTRY>
      <MANDT>600</MANDT>
      <ZCODE>600</ZCODE>
      <ZDESC>Pening Lalat2</ZDESC>
      <ZSAPCD>T2</ZSAPCD>
      </COUNTRY>
      </item>
      </Negara>
    Thaking You

    hi..
    1. itab --- > xml
    xml ---> itab.
    2. This program will do both.
    (just copy paste in new program)
    3.
    REPORT abc.
    DATA
    DATA : t001 LIKE TABLE OF t001 WITH HEADER LINE.
    DATA : BEGIN OF itab OCCURS 0,
    a(100) TYPE c,
    END OF itab.
    DATA: xml_out TYPE string .
    DATA : BEGIN OF upl OCCURS 0,
    f(255) TYPE c,
    END OF upl.
    DATA: xmlupl TYPE string .
    FIRST PHASE
    FIRST PHASE
    FIRST PHASE
    Fetch Data
    SELECT * FROM t001 INTO TABLE t001.
    XML
    CALL TRANSFORMATION ('ID')
    SOURCE tab = t001[]
    RESULT XML xml_out.
    Convert to TABLE
    CALL FUNCTION 'HR_EFI_CONVERT_STRING_TO_TABLE'
    EXPORTING
    i_string = xml_out
    i_tabline_length = 100
    TABLES
    et_table = itab.
    Download
    CALL FUNCTION 'GUI_DOWNLOAD'
    EXPORTING
    filetype = 'BIN'
    filename = 'd:\xx.xml'
    TABLES
    data_tab = itab.
    SECOND PHASE
    SECOND PHASE
    SECOND PHASE
    REFRESH t001.
    CLEAR t001.
    CALL FUNCTION 'GUI_UPLOAD'
    EXPORTING
    filename = 'D:\XX.XML'
    filetype = 'BIN'
    TABLES
    data_tab = upl.
    LOOP AT upl.
    CONCATENATE xmlupl upl-f INTO xmlupl.
    ENDLOOP.
    XML
    CALL TRANSFORMATION ('ID')
    SOURCE XML xmlupl
    RESULT tab = t001[].
    <b>Reward points if useful</b>
    Regards
    Ashu

  • Create a xml file from an internal table: CALL TRANSFORMATION

    Hello gurus,
    I want to create a xml file using data from scustom table. I will create an internal table and will select some records to it.
    I searched the forum and i discovered the call transformation, but when i execute the example program at the CALL TRANSFORMATION shows a dump screen.
    How we create a xml file from internal table??
    Please help me. I will mark the useful answers.

    I'm using if_ixml class to create xml documents
    TYPES: BEGIN OF xml_line,
             data(256) TYPE x,
           END OF xml_line.
    DATA: o_ixml          TYPE REF TO if_ixml,
          o_document      TYPE REF TO if_ixml_document,
          o_element       TYPE REF TO if_ixml_element,
          o_streamfactory TYPE REF TO if_ixml_stream_factory,
          o_ostream       TYPE REF TO if_ixml_ostream,
          o_renderer      TYPE REF TO if_ixml_renderer.
    DATA: t_xml_table     TYPE TABLE OF xml_line,
          v_xml_size      TYPE i.
    o_ixml = cl_ixml=>create( ).
    o_document = o_ixml->create_document( ).
    * The o_document have a set of methods to add elements, attributes, etc.
    o_element  = o_document->create_simple_element(
                      name = 'RootNode'
                      value = 'some text'
                      parent = o_document ).
    o_streamfactory = o_ixml->create_stream_factory( ).
    o_ostream = o_streamfactory->create_ostream_itable( table = t_xml_table ).
    o_renderer = o_ixml->create_renderer( ostream  = o_ostream document = o_document ).
    o_renderer->render( ).
    v_xml_size = o_ostream->get_num_written_raw( ).
    CALL METHOD cl_gui_frontend_services=>gui_download
      EXPORTING
        bin_filesize = v_xml_size
        filename     = 'C:a.xml'
        filetype     = 'BIN'
      CHANGING
        data_tab     = t_xml_table.

  • I want to convert XML file into SAP Internal table

    Hi Frndz,
    My xml file is:
    <?xml version="1.0" ?>
    - <!-- Comments: START DATE :1/11/2002 11:26:14 PM
      -->
    - <!-- Comments: RFID Tags read by Mercury4 Copyright Praff@Anantara Solutions
      -->
      <RFIDs><ID>0x303030303030303035050000B5EC</ID><ID>0x300833B2DDD901403505000042E7</ID></RFIDs>
    i want to take those 2 ID's in a internal table that id field is of 28 character type....
    very urgent.
    Thanks,
    Arunprasad.P

    class cl_ixml definition load.
    type-pools: ixml.
    types: begin of t_xml_line,
             data(256) type x,
           end of t_xml_line,
           begin of tsfixml,
             data(1024) type c,
           end of tsfixml.
    data: l_ixml type ref to if_ixml,
          l_streamfactory type ref to if_ixml_stream_factory,
          l_parser type ref to if_ixml_parser,
          l_istream type ref to if_ixml_istream,
          l_document type ref to if_ixml_document,
          l_node type ref to if_ixml_node,
          l_xmldata type string.
    data: l_elem type ref to if_ixml_element,
          l_root_node type ref to if_ixml_node,
          l_next_node type ref to if_ixml_node,
          l_name type string,
          l_iterator type ref to if_ixml_node_iterator.
    data: l_xml_table type table of t_xml_line,
          l_xml_line type t_xml_line,
          l_xml_table_size type i.
    data: l_filename type string.
    parameters: pa_file type char1024 default
    'C:\WINDOWS\Desktop\RFIDTags.xml'.
    *Validation of XML file: Only DTD included in xml document is supported
    parameters: pa_val type char1 as checkbox.
    start-of-selection.
    *Creating the main iXML factory
    l_ixml = cl_ixml=>create( ).
    *Creating a stream factory
    l_streamfactory = l_ixml->create_stream_factory( ).
    perform get_xml_table changing l_xml_table_size l_xml_table.
    *wrap the table containing the file into a stream
    l_istream = l_streamfactory->create_istream_itable( table = l_xml_table
                                                        size  = l_xml_table_size ).
    *Creating a document
    l_document = l_ixml->create_document( ).
    *Create a Parser
    l_parser = l_ixml->create_parser( stream_factory = l_streamfactory
                                      istream = l_istream
                                      document = l_document ).
    *Validate a document
    if pa_val eq 'X'.
        l_parser->set_validating( mode = if_ixml_parser=>co_validate ).
    endif.
    *Parse the stream
    if l_parser->parse( ) ne 0.
      if l_parser->num_errors( ) ne 0.
        data: parseerror type ref to if_ixml_parse_error,
              str type string,
              i type i,
              count type i,
              index type i.
              count = l_parser->num_errors( ).
              write: count, ' parse errors have occured:'.
              index = 0.
              while index < count.
                parseerror = l_parser->get_error( index = index ).
                i = parseerror->get_line( ).
                write: 'line: ', i.
                i = parseerror->get_column( ).
                write: 'column: ', i.
                str = parseerror->get_reason( ).
                write: str.
                index = index + 1.
              endwhile.
    endif.
    endif.
    *Process the document
    if l_parser->is_dom_generating( ) eq 'X'.
        perform process_dom using l_document.
    endif.
    *& Form get_xml_table
    form get_xml_table changing l_xml_table_size type i
                  l_xml_table type standard table.
    *Local variable declaration
    data: l_len type i,
          l_len2 type i,
          l_tab type tsfixml,
          l_content type string,
          l_str1 type string,
          c_conv TYPE REF TO cl_abap_conv_in_ce,
          l_itab type table of string.
    l_filename = pa_file.
    *upload a file from the client's workstation
    CALL FUNCTION 'GUI_UPLOAD'
      EXPORTING
        FILENAME                      = l_filename
        FILETYPE                      = 'BIN'
      IMPORTING
        FILELENGTH                    = l_xml_table_size
      HEADER                        =
      TABLES
        DATA_TAB                      = l_xml_table
    IF SY-SUBRC <> 0.
    MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
            WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
    ENDIF.
    *Writing the XML document to the screen
    CLEAR l_str1.
    LOOP AT l_xml_table INTO l_xml_line.
    c_conv = cl_abap_conv_in_ce=>create( input = l_xml_line-data
    replacement = space ).
    c_conv->read( IMPORTING data = l_content len = l_len ).
    CONCATENATE l_str1 l_content INTO l_str1.
    ENDLOOP.
    l_str1 = l_str1+0(l_xml_table_size).
    SPLIT l_str1 AT cl_abap_char_utilities=>cr_lf INTO TABLE l_itab.
    WRITE: /.
    WRITE: /' XML File'.
    WRITE: /.
    LOOP AT l_itab INTO l_str1.
    REPLACE ALL OCCURRENCES OF cl_abap_char_utilities=>horizontal_tab
    IN
    l_str1 WITH space.
    WRITE: / l_str1.
    ENDLOOP.
    WRITE: /.
    endform. "get_xml_table
    *& Form process_dom
    form process_dom using document type ref to if_ixml_document.
    data: node type ref to if_ixml_node,
          iterator type ref to if_ixml_node_iterator,
          nodemap type ref to if_ixml_named_node_map,
          attr type ref to if_ixml_node,
          name type string,
          prefix type string,
          value type string,
          indent type i,
          count type i,
          index type i.
    data: name2 type string,
          name_root type string,
          node_parent type ref to if_ixml_node,
          node_root type ref to if_ixml_node,
          num_children type i.
        node ?= document.
    check not node is initial.
    uline.
    write: /.
    write: /' DOM-TREE'.
    write: /.
    if node is initial. exit. endif.
    create a node iterator
      iterator = node->create_iterator( ).
    get current node
      node = iterator->get_next( ).
    loop over all nodes
        while not node is initial.
          indent = node->get_height( ) * 2.
          indent = indent + 20.
          num_children = node->num_children( ).
          case node->get_type( ).
          when if_ixml_node=>co_node_element.
           element node
            name = node->get_name( ).
            nodemap = node->get_attributes( ).
            node_root = node->get_root( ).
            name_root = node_root->get_name( ).
            write: / 'ELEMENT :'.
            write: at indent name color col_positive inverse.
            write: 'NUM_CHILDREN:', num_children.
            write: 'ROOT:', name_root.
            node_parent = node->get_parent( ).
            name2 = node_parent->get_name( ).
            write: 'NAME2: ' , name2.
        if not nodemap is initial.
    *attributes
            count = nodemap->get_length( ).
            do count times.
            index = sy-index - 1.
            attr = nodemap->get_item( index ).
            name = attr->get_name( ).
            prefix = attr->get_namespace_prefix( ).
            value = attr->get_value( ).
            write: / 'ATTRIBUTE:'.
            write: at indent name color col_heading inverse, '=',
            value color col_total inverse.
        enddo.
    endif.
    when if_ixml_node=>co_node_text or
    if_ixml_node=>co_node_cdata_section.
    *text node
    value = node->get_value( ).
    write: / 'VALUE :'.
    node_parent = node->get_parent( ).
    write: at indent value color col_group inverse.
    name2 = node_parent->get_name( ).
    write: 'NAME2: ' , name2.
    endcase.
    *advance to next node
    node = iterator->get_next( ).
    endwhile.
    endform. "process_dom
    Thanks,
    Arunprasad.P

  • XML and XSD file to an internal table

    I had read a lot of thread  but i don't understand how to deal with xml/xsd in R3.
    I need someone that have a definite example for this escenary please.
    With OPEN DATASET took from the server XML and XSD file, and put it in two internal tables type string.
    What functions or method have to use, and how to use them, to charge the XML file in an internal table?
    This is an example of XML and XDS:
    XML
    AND CONTINUE
    Best Regards,

    I just tried to interpret your question, it was not obvious what you wanted.
    I guess what you mean is that you have defined (statically) a deep structure, and you want to decode the XML into it. That is called a transformation (transaction STRANS, statement CALL TRANSFORMATION). You have the choice between 2 transformation languages: XSLT and ST. Of course, it depends what release you are running.
    I advise you to play first with the ID transformation, to convert an ABAP deep structured data object into XML, so that you see what XML is generated, this one is called asXML. If you create your own transformation, when you call it, it will first convert automatically the data object to asXML, and the transformation has to do the rest of the job.
    You can do the opposite, i.e. converting from XML to a data object, according to the same principle (intermediate asXML).
    Well, there are lots of things to say, I recommend you to read articles and documentation on XSLT and ST (search on SDN).
    About XSD, it won't help (and I did never see any possibility to use it) to decode the XML, as you must anyway define the target data object statically (and there's no tool to generate the ABAP code of the data object definition from the XSD).
    Note that you may also use iXML libraries to parse the XML.
    Please tell us more.
    BR
    Sandra

  • Xml string to abap internal  table

    HI Experts ,
    I want to parse this XML file to abap internal table ,i read as usual  the Help and i think
    that something is missing on my code.
    There is someone can help.
    The fields is type string and the value is :
    <Containers> <Container workitemid = "00000017" IsParent = "X"><Element name = "_WF" value = "USI029"/><Element name = "_WF_PRIOR" value = "5"/><Element name = "_WF_VERSION" value = "0000"/><Element name = "_WF_NESTING_LEVEL" value = ""/><Element name = "XUBNAME" value = ""/><Element name = "XUACCNT" value = ""/><Element name = "SHORTTEXT" value = ""/><Element name =
    i use the call transformation code and there i put this code:
    <?sap.transform simple?>
    <tt:transform xmlns:tt="http://www.sap.com/transformation-templates">
    <tt:root name="XML_TAB"/>
      <tt:template>
        <Containers>
          <tt:loop name="a" ref=".XML_TAB">
            <Container>
              <tt:attribute name="Element name" value-ref="$a.name"/>
              <tt:attribute name="value" value-ref="$a.value"/>
            </Container>
          </tt:loop>
        </Containers>
      </tt:template>
    </tt:transform>
    I think that i miss something with the line :<Container workitemid = "0000007" IsParent = "X">
    the dump is:
    An exception occurred that is explained in detail below.
    The exception, which is assigned to class 'CX_ST_MATCH_ATTRIBUTE', was not
      caught and
    therefore caused a runtime error.
    The reason for the exception is:
    XML matching error
    Expected was attribute: "Elementname" [ ] Read was element-start: "Container" [
    Please help
    Regards
    Chris
    Edited by: Chris Teb on Aug 6, 2009 9:57 AM

    H Siva,
    Thanks ,
    I try exactly like u tell and i get this dump:
    An exception occurred that is explained in detail below.
    The exception, which is assigned to class 'CX_ST_MATCH_ELEMENT', was not caught
      and
    therefore caused a runtime error.
    The reason for the exception is:
    XML matching error
    Expected was element-end: "Containers" [ ] Read was element-start: "Container"
    <Containers>
        <Container>
            <tt:loop name="a" ref=".XML_TAB">
            <Element >
              <tt:attribute name="name" value-ref="$a.name"/>
              <tt:attribute name="value" value-ref="$a.value"/>
              </Element>
              </tt:loop>
            </Container>
        </Containers> ->**the dump in the debugger is here .**
      </tt:template>
    </tt:transform>
    Any Idea?
    Regards
    Chris

  • Hello Anybody, I have a question. Can any of you please suggest me how to make an xml file from the database table with all the rows? Note:- I am having the XSD Schema file and the resulted XML file should be in that XSD format only.

    Hello Anybody, I have a question. Can any of you please suggest me how to make an xml file from the database table with all the records?
    Note:- I am having the XSD Schema file and the resulted XML file should be in that XSD format only.

    The Oracle documentation has a good overview of the options available
    Generating XML Data from the Database
    Without knowing your version, I just picked 11.2, so you made need to look for that chapter in the documentation for your version to find applicable information.
    You can also find some information in XML DB FAQ

Maybe you are looking for

  • Lenovo T420, Type 4177 Review

    Lenovo T420, Type 4177-CTO. Windows 7 Pro, 64 bit.  8 GB RAM,  500 GB HD, third party 128 GB SSD added. After inspecting many laptops I chose the ThinkPad T420. The only better laptop was Apple and I needed different software. An important considerat

  • Adding a user to the File Security Realm

    Hello, When I attempt to add a new user to the file realm with Application Server->Security-Realms->file-> Manage Users, I get the error: A "com.sun.enterprise.tools.guiframework.exception.FrameworkError" was caught. The message from the exception: "

  • Dialog instance installation procedure.

    Hi We are planning to install a new dialog instance to our production system in a seperate host(A new server). The normal way of doing is to initiate SAPINST tool on the new server and install just the dialog instance and club this with the main cent

  • Vector Question

    Hi, I am using sql server to retrieve the data. Wondering if it's possible to use vector to do multiple batch update/prepared statement? or some other suggestions? Environment is jsp/beans. For instance.. In a database table, the display in jsp for t

  • Cannot run viewer.jsp (crystal report)

    Hi, I'm using eclipse SDK 3.5. I already create report using crystal report, report name "RepCustomer"  but when i run RepCustomer-viewer.jsp this error come out = com.crystaldecisions.sdk.occa.report.lib.ReportSDKException: Could not initialize clas