Redchair software's Anapod corrupts ipod classic 160 on PC?

Hello. Does anyone use Redchairsoftware's Anapod Explorer on their PC? I find that I can use it to add songs to the ipod classic 160, but once I disconnect, no songs are found on the ipod. And then when I connect to itunes, it says a restore is necessary, leaving me with an empty ipod. I was hoping someone out there might have gone through the same thing. Thank you for your time.

Welcome to the discussions, disintegration79.
It's been reported that iTunes alternative applications will not work with the new iPods due to some changes being made to how files are stored.
http://www.tuaw.com/2007/09/15/6th-gen-ipods-wont-work-with-linux-winamp/
There's currently no information on their website, but this statement from their front page
+"Anapod supports all iPod models available in the market."+
is most certainly false.
Message was edited by: Kyn Drake

Similar Messages

  • My Ipod Classic 160 GB will charge but is not recognized on my macbook or in itunes. Just began suddenly

    I purchased my Ipod Classic 160 GB about a year ago new and never had any issues until lately. I recently updated my itunes to the newest version and my Ipod seemed fine and didn't have any trouble. About a week later my Ipod was no longer recognized by Itunes or my Mac book. The catch is, that my Ipod is still able to charge but never shows any signs of connection besides the charging screen. I have no clue where to begin.
    Any help would be awesome! Thanks

    Have you updated your iPod and iTunes sofware?
    most cases, iTunes can play these high quality songs, which is meant for newer mobile devices like  iPhones, iPod Touch, nano and iPad, which the older iPod cant play, but only playable with iPod classic sofware version 2.0.4
    most likely it is an incompatible song format, read this Apple support article.
    http://support.apple.com/kb/HT1334?viewlocale=en_USet
    If  your iPod software is version 1.1.2, then you have to use lower quality format.
    Can you select the problematic song, and Advance -> create iPod version

  • IPod classic displays 'No music' after sync, HDD problem? Geschiedenis • Verwijder  So recently I synced my iPod Classic 160 GB like I did so many times and when I wanted to play some music afterwards it couldn't find any files on the iPod anymore. H

    So recently I synced my iPod Classic 160 GB like I did so many times and when I wanted to play some music afterwards it couldn’t find any files on the iPod anymore. However when you look in the settings it displays that ~roughly 90 GB free space is available. Seen the fact that I had about 60 gigs of music this doesn’t seem like a coincidence and I think my music is still somewhere on the ipod but the HDD isn’t recognizing it anymore.
    I’ve tried resetting it, and resetting it to factory settings, which didn’t work. When connected to a desktop it won’t be recognized by iTunes, it displays an error message that the iPod cannot be read and that I have to reset it to factory settings.
    I’ve spent some time researching this problem yesterday and I ran into a myriad of vaguely similar problems didn’t really offer any help. Currently I’m thinking that formatting the iPod might work, and restoring the software afterwards. However this is a rather bold strategy so I’d like to consult you here first.
    Thanks in advance!

    Hi turingtest2,
    Thank you for the info, with formatting my iPod I managed to connect it to iTunes again.
    However..in the page you linked to there is a section about how transferring large amounts of data can dump your library. That seems to be the problem in this case. It won't even allow me to transfer more than 2 gigabytes of music per sync, if I go higher it will dump everything again. Having over >60 GB of music in my library, this is disastrous to say the least.
    Do you think that there is any other solution besides the method you mentioned involving Smart Playlists?

  • IPod Classic 160 GB doesn't work for audiobooks in BMW X3 F25

    Hello
    I have been owning a 160 GB iPod classic for a while now. I have newly acquired a BMW X3 (2012 Model, F25). The problem is that when listening to audiobooks, the iPod doubles or triples the speed (and pitch) when I return to the car after having parked. So it runs fine at first, then I stop and park the car and return and then it sounds like Donald Duck is reading to me ;-)
    The car comes with the USB interface to which once can connect media players like the iPod. I am using the original BMW "Y-shape" cable that has once connection on the iPod that then splits into an USB and a 3.5mm jack. I also tried cables from Belkin and the cable that came with the iPod, but all to no avail.
    It is not the Audiobook faster/slower function of the ipod that is activated because that would not change pitch, it's like "the record is turning too fast", you can see the seconds in the car's display movig much faster than at a second's pace. The iPod subsequently retains this increased speed even if not connected to the car anymore and can only be slowed down again by resetting it.
    I onw an older iPod photo 80 GB which does not exhibit this behavior.
    The iPod classic 160 is at the latest software level and so is the car.
    Any ideas?
    Regards
    Chris

    Having the same issue.  See https://discussions.apple.com/message/23993137#23993137.

  • Ipod Classic 160 will not synch with Itunes

    Message from Itunes when I connect Ipod Classic 160 is "Software required for communicating with the Ipod is not installed correctly. Please reinstall Itunes" I have reinstalled 7.6 several times and tried 7.5 but nothing works. I have tried the 5R's. Nothing. When I connect the Ipod to another older Seanix with Itunes 7.5, it works. Can anybody out there solve this problem. I have been going round and round for 10 hours. Cheers.

    Well start with these articles and see if that gets you anywhere...
    iPod is not recognized properly by computer when USB drivers are not installed properly or are out of date
    http://docs.info.apple.com/article.html?artnum=305136
    iTunes for Windows: iTunes 7 doesn't recognize iPod
    http://docs.info.apple.com/article.html?artnum=304434
    iPod missing in "My Computer" or in iTunes for Windows
    http://docs.info.apple.com/article.html?artnum=61711
    Also you might try forcing the iPod into disk mode first, then connecting it to your computer and see if that makes it show up in iTunes...
    Putting iPod into Disk Mode
    http://docs.info.apple.com/article.html?artnum=93651
    Patrick

  • TS3694 I'm geting an unknown error message 13010 when I restored my iPod Classic (160 GB)  2.0.4 Mac to my OS X version 10.9.5 Mac  computer.  It cannot by synced.  Help!!

    I'm geting an unknown error message 13010 when I restored my iPod Classic (160 GB)  2.0.4 Mac to my OS X version 10.9.5 Mac  computer.  It cannot by synced.  Help!!

    See Corrupt iPod classic.
    tt2

  • TS1538 ipod classic 160 gb. unable to restore or format. tried all the recommended steps. no go. Any suggestions?

    ipod classic 160 gb. Unable to Restore.  Also cannot format via C:\ right click on drive and Format.  Have tried all the recommended steps I can find. No luck. Any suggestions?

    do you need an internet connection to do a restore? (after downloading the software of course)
    I can't get to a different connection until Friday night...
    It doesn't seem like the antivirus and whatnot made any difference.
    what kind of hardware problem do you think it is/would it be fixable or would I have to buy a whole new ipod?
    I think the harddrive is still okay... it feels the same vibration wise now as it was when it was working fine- no awkward clicking or movements like I experienced when my old laptop's harddrive crashed.

  • Is there a bluetooth adaptor for an old iPod classic (160 GB) that also works like a radio remote?

    Is there a bluetooth adapter for an old iPod classic (160 GB) that also works like a radio remote?  I have a bluetooth headset and I want to listen to FM radio on my iPod.
    Or is there a better way than to use an adapter in order to listen to  the radio on an iPod with a bluetooth headset?
    TIA!

    Have you updated your iPod and iTunes sofware?
    most cases, iTunes can play these high quality songs, which is meant for newer mobile devices like  iPhones, iPod Touch, nano and iPad, which the older iPod cant play, but only playable with iPod classic sofware version 2.0.4
    most likely it is an incompatible song format, read this Apple support article.
    http://support.apple.com/kb/HT1334?viewlocale=en_USet
    If  your iPod software is version 1.1.2, then you have to use lower quality format.
    Can you select the problematic song, and Advance -> create iPod version

  • HT3798 Ipod Classic 160 7th Generation - I don't see any settings in the menu.  I want to shuffle songs.

    I just purchased I IPOD Classic 160 gig 7th generation and when I look at my menu, I have no settings listed.  I want to set it to shuffle mode within a genre.  Do I need to have this connected to the itunes software for this to show up?
    Best Regards
    Michael Gould

    You need iOS 5 to have iCloud and that requires a 3G or 4G iPod.. You have a 2G iPod and that can only go to iOS 4.2.1.
    iCloud: What if my device or computer doesn't meet iCloud system requirements?

  • Corrupt iPod classic

    Hello, I bought a 160 GB iPod classic in December 2013. I have had no issues with it until recently i open iTunes and it tells me that my iPod is corrupted. I have tried reconnecting it, turning my computer on and off again, holding down the menu and center button, putting it in disk mode etc. I was just wondering if anyone has anyway they can fix this issue?
    Thanks,

    See Corrupt iPod classic.
    tt2

  • Discussion: backing up or restoring from my Ipod Classic 160

    Recently I had a hard disk problem on my PC and had a new disk installed as H drive. I use Windows XP home edition and H is now the start up drive.
    The previous hard disk remains as C drive.
    I have had major problems restoring the backed up music from an external hard drive that I thought had my entire music library backed up. But apparently not so.
    Anyway, right now I am satisfied that my Ipod Classic 160 has my entire music library (approx 12000 songs) on it and is working satisfactorily. (I purchased the Ipoc Classic 160 earlier this year to replace a defective Ipod Classic 120 and at that time the Itunes library synched perfectly with the new Ipod.
    Similarly, when I open Itunes it shows my music library and playlists as they should be.
    I have purchased a third party software (CopyTrans) with the view of restoring my Ipod and its contents and hopefully again synchronising it with Itunes.
    But I am not sure the best way to go. I dread the thought of doing something that could compromise the data on my Ipod Classic 160 because it seems the only place where my entire music library is intact.
    I can't explain how or why files are missing from my hard disk (H drive) or external back up (J drive).
    I've contacted Apple support and they have been most helpful as far as they can be. They can't assist with advice of getting the data back from my Ipod Classic 160 and again synchronising with Itunes.
    I am conscious of the old saying that a little knowledge is sometimes worse than none at all and am rather nervous about what I need to do so any advice or assistanct would be appreciated.
    Thanks in anticipation
    Paul in Melbourne (Australia)

    I think I know what you're trying to do, and I know how to do it, but I'm not entirely sure. if you want the songs, pictures, etc. that are on your iPod to transfer to your computer, there is a way of doing that simply through the computer its self. without buying anything. it's entirely free and legal. and then if I'm understanding correctly, you have an external hard drive that you want all of those songs on. so if I were to tell you how to take the songs from your iPod, put them on your computer, and then move them from your computer to an external hard drive, would that answer your question? because, if so, I can tell you how to do that, but if thats not the answer you're looking for, then I can't be sure exactly what the question is that you're asking. sorry, hope I can be of help..

  • Error updating firmware for Ipod Classic 160

    Ive been trying to update my Ipod Classic 160 for a few days now for update 1.1.1. ive tried several times and the update will download but then i get the error messages. "Ipod cannot be updated at this time, Firmware corrupted".
    So what do i do now?

    With that one, the following document might be worth a try:
    What to do if iPod can't be updated because the firmware file was corrupt or not found

  • My iPod Classic 160 is in disc mode and won't turn off, itunes doesn't recognize it - ¿how can I make it work again?

    My iPod Classic 160 is in disc mode.  I responds to nothing.  iTunes doesn't recognize it.  It doesn't sync.  I've tried to restore and got error 1429.  Now it just stays in disc mode and won't turn off.  I'm keeping it connected to the charger so it doesn't go dead.  Is there anything I can do to resurrect my pod?

    To get out of disk mode do a iPod Hard Reset.
    Toggle the Hold switch till you dont see the red mark.
    Press Menu and Center buttons simultaneously for about 10 secs till the Apple logo comes ON then release the buttons
    Select your preferred language.
    See this Apple support Article on the 5Rs.
    http://www.apple.com/support/ipod/five_rs/classic/
    If you try to restore and get a1429 error message, read this Apple Support Article
    http://support.apple.com/kb/TS1372
    Good Luck!

  • Ipod Classic 160 6th g. doesn't sync w/Imac g5 non intel OS 10.4.11. This is a replacement for same ipod which was stolen recently. That pod worked fine with Itunes 9! Now this pod says it only works with Itunes 10.7. ***!!!! Why has Apple screwed up?

    My ipod classic 160 6th gen. was recently stolen. It had 3000 tunes on it and it synced perfectly with Itunes 9 on my Imac G5 non intel OS 10.4.11. So I recently bought same model and guess what, it doesn't sync at all. Now message says it only works with Itunes 10.7 and up. I certainly cant afford to buy a new intel based Mac and I really dont need a new pc. It feels like Apple has dropped the ball on its long time users and tough luck to you and all the $$$$$$$ spent on downloading songs and buying ipods over the years! I AM SO ANGRY THAT I CANNOT BRING MY MUSIC WITH ME ANYMORE. I dont know if there is any solution to this except being extorted to upgrade to new tech! I have been trying to get answers to this issue but nothing seems to work. Any help would be greatly appreciated. I am not a tech genius so extremely techy solutions will be in vane.

    one more detail, after a restore, when I attempt to reload music to the ipod, if I try and move, say, 20 files, the transfer seems to work as it should but then stalls on the last file.  Eventually, the status will change to "Updates Files on (my ipod)" a and suggests the iPod is syncing  even though I have the auto sync feature turned off.
    This process eventually works itself out, and seems to take longer relative to the number of files I attempt to transfer.   Once done, howver, if I try and eject and dismount the iPod, iTunes stalls with the spinning pinwheel and I am warned that the iPod is syncing again with the spinning candy cane status bar.     Eventually thisd works itself out and the iPod dismounts from iTunes and the desktop and eventually the iPod is free to disconnect.
    Then if I try and play the music I just transfered, the iPod says there is no music loaded.
    Ideas?

  • Brand new iPod classic 160 gb won't show up in iTunes devices

    Brand new iPod classic 160 gb won't show up in iTunes devices. The iPod is fully charged, iTunes reckonises my iPod touch, iPad, iPhone 3G and iPhone 4, but not the iPod classic, although it says the iPod is connected it doesn't register in iTunes.

    I purchased a new iPod Classic 160 GB in August 2013 and it (the iPod Classic device) would not show in iTunes though it did show in the Apple Finder. I tried EVERYTHING numerous times including resetting the iPod, updating iTunes and trying everything in the book and in on-line tips. Nothing worked and I was about to give up when I tried using the Apple iPod Classic cable that actually came in the iPod Classic box. It worked!!! Conclusion? Dont just use any old Apple cable eg. from a iPhone or whatever; TRY the USB cable that came with your iPod Classic!!! I have 2009 iMac with the latest Mac OS BTW.

Maybe you are looking for

  • Printing of continuous similar pages in a script

    hi experts,         i have customized a script, the script contains only one page data. but i want to print the same script with small header content change for 5 times in one execution.. thanks & regards deepika

  • Recoloring a halftone pattern in Illustrator

    Hello, I have a question regarding changing the color of a halftone pattern created in Illustrator. Here is what I do step by step: 1) fill the expanded text with a black and white gradient 2) apply Effects>Pixelate>Color Halftone 3) expand the halft

  • Greek support for jsp

    Hello, I am working on an MVC model where the user submits a form where the text is in greek, passes it to a bean and that is being read by a jsp page. Even though in the eclipse console the greek characters are apperaing in the jsp page where I am u

  • EP5 - IISWAM Com+ components

    Still have a very old version of the Portal running, EP5 SP3. We recently had a problem with the registry and lost all entries for the components labeled: IISWAM.1__ROOT__SAPPortal__Common__iView_runtime... I would grealt appreciate it if anyone had

  • Question on Filestreams

    Hi All, I have a question on Filestreams. I know that Filestreams are introduced in SQL2008 and used to stored BLOBs on NTFS file system and not in the database file. Now, question is, what is benefit of do so? Why do we need to store on File system