Redeeming tones after installing 8.1.2

The update told me I would be able to redeem my tones that were lost after my update. How may I go about doing that?

Hi there hgriffin2853,
It looks like the article below outlines the process to restoring Tones.
Restore missing tones on your iPhone, iPad, or iPod touch running iOS 8.1.1
-Griff W.

Similar Messages

Mac Pro will not sleep properly after installing new SATA BD-CD-DVD drive.

Hello and thank you in advance for time reading this.
I have been using a Mac Pro for 4 years and it never happened to me before.
This started almost immediately after installing a new SATA BD-CD-DVD Drive.
When the Mac is ordered to sleep, It shuts down 3 out of 4 Hard Drives
(I guess the one that doesn't is the OSX Drive) and It will not shut down the fans
and the display has no signal.
During that (when it won't sleep completely) the Mac is completely paralysed and it's unable to wake up.
Now, I've tried being patient and giving the Mac a ton of time to sleep.
In some cases it actually worked and the Mac did sleep completely and it was able to wake up,
but that defeats the purpose (being able to sleep and wake up in an in a few seconds).
In these few cases, the Mac took about 30 min to sleep.
In the rest of the cases the Mac never slept and I had to emergency shut it off from the power button.
In simply words, Mac falls into a "coma", not asleep but not awake at the same time.
As I said, this started exactly when I installed an SATA LG CH10LS20 optical Drive.
You may say that the Mac Pro does not support SATA for optical Drives.
This is why you should know that there is a SATA port on the motherboard of a Mac,
and with the correct method you can connect a SATA Drive AND be able to use it with out additional drivers.
http://www.tomorrowland.com/guides/mac-pro-optical-drive-install-part-1/
Now, you may say that If I'm so sure that it's the new drive causing the problem, why don't I disconnect it?
Well, please try to understand me, it's an all new drive and it cost a good load of money...
and other users of the same drive do not have that problem... yet...
Is there a way for the drive (which otherwise works fine) and the Mac to coexist and work properly?
Do you really think it's the new Drive?
Is the motherboard bothered somehow by the new drive and wont go to sleep properly?
Any kind of help is welcome and
I thank you in advance if you can help me.

Thanks for taking the time to respond RedBaron, I don't have a USB aircard in this system but I do have numerous firewire drives. I haven't unplugged everything yet and restarted. That's a good tip. I think I will try that to see if that is the problem.
Thanks again
Chris

After installing OSX 10.9.3 laptop will freeze

It seems as if after installing the update for mavericks 10.9.3 I am getting tons of freezing on my laptop. It happens sporatically and doesn't seem to be a direct result of me doing anyhing in perticular. The screen will just suddenly spaz out and then the whole laptop will freeze up.
Here is a copy of my perticulars
EtreCheck version: 1.9.11 (43) - report generated May 30, 2014 at 12:06:56 PM EDT
Hardware Information:
          MacBook Pro (17-inch, Late 2011)
          MacBook Pro - model: MacBookPro8,3
          1 2.4 GHz Intel Core i7 CPU: 4 cores
          16 GB RAM
Video Information:
          Intel HD Graphics 3000 - VRAM: 512 MB
          AMD Radeon HD 6770M - VRAM: 1024 MB
System Software:
          OS X 10.9.3 (13D65) - Uptime: 0 days 0:15:56
Disk Information:
          APPLE HDD HTS727575A9E362 disk0 : (750.16 GB)
                    EFI (disk0s1) <not mounted>: 209.7 MB
                    Macintosh HD (disk0s2) / [Startup]: 749.3 GB (520.84 GB free)
                    Recovery HD (disk0s3) <not mounted>: 650 MB
          MATSHITADVD-R   UJ-8A8
USB Information:
          Apple Inc. iPhone
          Apple Inc. Apple Internal Keyboard / Trackpad
          Apple Inc. BRCM2070 Hub
                    Apple Inc. Bluetooth USB Host Controller
          Apple Inc. FaceTime HD Camera (Built-in)
          Logitech USB Optical Mouse
          Apple Computer, Inc. IR Receiver
Thunderbolt Information:
          Apple Inc. thunderbolt_bus
Gatekeeper:
          Mac App Store and identified developers
Kernel Extensions:
          [kext loaded] com.Cycling74.driver.Soundflower (1.6.6 - SDK 10.6) Support
          [not loaded] com.cisco.nke.ipsec (1.0.0) Support
          [kext loaded] com.techsmith.TACC (1.0.2 - SDK 10.7) Support
Startup Items:
          CiscoVPN: Path: /System/Library/StartupItems/CiscoVPN
          esets_daemon_si: Path: /Library/StartupItems/esets_daemon_si
Problem System Launch Daemons:
          [failed] com.apple.pfctl.plist
Launch Daemons:
          [loaded] com.google.keystone.daemon.plist Support
          [running] com.leapmotion.leapd.plist Support
          [loaded] com.microsoft.office.licensing.helper.plist Support
          [running] com.parallels.mobile.dispatcher.launchdaemon.plist Support
          [loaded] com.parallels.mobile.kextloader.launchdaemon.plist Support
          [running] com.splashtop.streamer-daemon.plist Support
          [loaded] com.splashtop.streamer-srioframebuffer.plist Support
Launch Agents:
          [not loaded] com.adobe.AAM.Updater-1.0.plist Support
          [loaded] com.google.keystone.agent.plist Support
          [loaded] com.leapmotion.Leap-Motion.plist Support
          [loaded] com.parallels.mobile.prl_deskctl_agent.launchagent.plist Support
          [not loaded] com.splashtop.streamer-for-root.plist Support
          [running] com.splashtop.streamer-for-user.plist Support
User Launch Agents:
          [failed] com.adobe.ARM.[...].plist Support
          [loaded] com.citrixonline.GoToMeeting.G2MUpdate.plist Support
          [loaded] com.parallels.mobile.startgui.launchagent.plist Support
User Login Items:
          gfxCardStatus
          CheatSheet
          Arranger
          iTunesHelper
          Battery Health
          Dropbox
          QuikIO
          Google Chrome
          BetterTouchTool
          ESET NOD32 Antivirus 4
Internet Plug-ins:
          JavaAppletPlugin: Version: 14.8.0 - SDK 10.9 Check version
          o1dbrowserplugin: Version: 3.19.1.13088 Support
          nplastpass: Version: 2.5.5 Support
          Unity Web Player: Version: UnityPlayer version 4.1.3f3 Support
          Default Browser: Version: 537 - SDK 10.9
          AdobeAAMDetect: Version: AdobeAAMDetect 1.0.0.0 - SDK 10.6 Support
          AdobePDFViewerNPAPI: Version: 11.0.04 - SDK 10.6 Support
          Silverlight: Version: 5.1.30317.0 - SDK 10.6 Support
          QuickTime Plugin: Version: 7.7.3
          googletalkbrowserplugin: Version: 3.19.1.13088 Support
          SharePointBrowserPlugin: Version: 14.4.2 - SDK 10.6 Support
          AdobePDFViewer: Version: 11.0.04 - SDK 10.6 Support
          npgtpo3dautoplugin: Version: 0.1.44.28 - SDK 10.5 Support
          MeetingJoinPlugin: Version: (null) - SDK 10.6 Support
Safari Extensions:
          LastPass: Version: 3.1.21
          Open in Internet Explorer: Version: 1.0
Audio Plug-ins:
          BluetoothAudioPlugIn: Version: 1.0 - SDK 10.9
          AirPlay: Version: 2.0 - SDK 10.9
          AppleAVBAudio: Version: 203.2 - SDK 10.9
          iSightAudio: Version: 7.7.3 - SDK 10.9
iTunes Plug-ins:
          Quartz Composer Visualizer: Version: 1.4 - SDK 10.9
User Internet Plug-ins:
          CitrixOnlineWebDeploymentPlugin: Version: 1.0.105 Support
          WebEx64: Version: 1.0 - SDK 10.6 Support
3rd Party Preference Panes:
          None
Time Machine:
          Skip System Files: NO
          Mobile backups: OFF
          Auto backup: NO - Auto backup turned off
          Time Machine not configured!
Top Processes by CPU:
               4%          WindowServer
               1%          fontd
               1%          Microsoft Lync
               0%          Leap Motion
               0%          CheatSheet
Top Processes by Memory:
          180 MB          com.apple.IconServicesAgent
          131 MB          Finder
          131 MB          Google Chrome
          98 MB          WindowServer
          82 MB          ocspd
Virtual Memory Information:
          10.31 GB          Free RAM
          3.19 GB          Active RAM
          898 MB          Inactive RAM
          1.61 GB          Wired RAM
          745 MB          Page-ins
          0 B          Page-outs

I have the same problem. After installing OSX 10.9.3. my Macbook freezes more than 7 times. The problem came up after switching via Thunderbold to a second screen or after "waking" the macbook up. The last time osx didn't boot anymore. It freezes after the "Apple Logo" came up. (grey screen).
After booting the system with "cmd+V" OSX started again. Now I'm afraid to shut down the system and the macbook runs all day.
I hope someone can help me, here my perticulars:
EtreCheck version: 1.9.11 (43) - report generated 2. Juni 2014 08:50:50 MESZ
Hardware Information:
          MacBook Pro (15-inch, Late 2011)
          MacBook Pro - model: MacBookPro8,2
          1 2.4 GHz Intel Core i7 CPU: 4 cores
          8 GB RAM
Video Information:
          Intel HD Graphics 3000 - VRAM: 512 MB
          AMD Radeon HD 6770M - VRAM: 1024 MB
System Software:
          OS X 10.9.3 (13D65) - Uptime: 0 days 16:58:21
Disk Information:
          TOSHIBA MK7559GSXF disk0 : (750,16 GB)
                    EFI (disk0s1) <not mounted>: 209,7 MB
                    Macintosh HD (disk0s2) / [Startup]: 749,3 GB (135,67 GB free)
                    Recovery HD (disk0s3) <not mounted>: 650 MB
          MATSHITADVD-R   UJ-8A8
USB Information:
          Western Digital External HDD     500,11 GB
                    EFI (disk1s1) <not mounted>: 209,7 MB
                    DATEN2 (disk1s2) /Volumes/DATEN2: 87,11 GB (8,14 GB free)
                    DATEN (disk1s3) /Volumes/DATEN: 412,66 GB (24,8 GB free)
          Apple Inc. Apple Internal Keyboard / Trackpad
          Apple Inc. BRCM2070 Hub
                    Apple Inc. Bluetooth USB Host Controller
          Apple Inc. FaceTime HD Camera (Built-in)
          Apple Computer, Inc. IR Receiver
Thunderbolt Information:
          Apple Inc. thunderbolt_bus
Configuration files:
          /etc/hosts - Count: 30
Gatekeeper:
          Mac App Store and identified developers
Kernel Extensions:
          [kext loaded] at.obdev.nke.LittleSnitch (4052 - SDK 10.8) Support
          [kext loaded] com.Cycling74.driver.Soundflower (1.5.2) Support
          [kext loaded] com.Cycling74.driver.WondershareAudioDevice (1.5.2) Support
          [kext loaded] net.telestream.driver.TelestreamAudio (1.0.5 - SDK 10.6) Support
Problem System Launch Agents:
          [loaded] com.paragon.NTFS.notify.plist Support
Launch Daemons:
          [running] at.obdev.littlesnitchd.plist Support
          [failed] com.adobe.fpsaud.plist Support
          [loaded] com.adobe.SwitchBoard.plist Support
          [loaded] com.microsoft.office.licensing.helper.plist Support
          [loaded] com.oracle.java.Helper-Tool.plist Support
          [loaded] com.oracle.java.JavaUpdateHelper.plist Support
Launch Agents:
          [running] at.obdev.LittleSnitchUIAgent.plist Support
          [not loaded] com.adobe.AAM.Updater-1.0.plist Support
          [loaded] com.adobe.CS5ServiceManager.plist Support
          [loaded] com.oracle.java.Java-Updater.plist Support
User Launch Agents:
          [loaded] com.adobe.ARM.[...].plist Support
          [failed] com.apple.CSConfigDotMacCert-[...]@me.com-SharedServices.Agent.plist
          [loaded] com.google.keystone.agent.plist Support
          [running] com.spotify.webhelper.plist Support
User Login Items:
          iTunesHelper
          Mail
          Google Chrome
Dropbox
          Spotify
Internet Plug-ins:
          FlashPlayer-10.6: Version: 13.0.0.214 - SDK 10.6 Support
          QuickTime Plugin: Version: 7.7.3
          AdobePDFViewerNPAPI: Version: 11.0.0 - SDK 10.6 Support
          AdobePDFViewer: Version: 11.0.0 - SDK 10.6 Support
          Flash Player: Version: 13.0.0.214 - SDK 10.6 Support
          Default Browser: Version: 537 - SDK 10.9
          SharePointBrowserPlugin: Version: 14.0.0 Support
          JavaAppletPlugin: Version: Java 7 Update 60 Check version
Audio Plug-ins:
          BluetoothAudioPlugIn: Version: 1.0 - SDK 10.9
          AirPlay: Version: 2.0 - SDK 10.9
          AppleAVBAudio: Version: 203.2 - SDK 10.9
          iSightAudio: Version: 7.7.3 - SDK 10.9
iTunes Plug-ins:
          Quartz Composer Visualizer: Version: 1.4 - SDK 10.9
3rd Party Preference Panes:
          Flash Player Support
          Growl Support
          Java Support
          Launchpad-Control Support
          Paragon NTFS for Mac ® OS X Support
Time Machine:
          Time Machine not configured!
Top Processes by CPU:
               4%          WindowServer
               1%          fontd
               0%          Little Snitch Agent
               0%          Little Snitch Network Monitor
               0%          systemstatsd
Top Processes by Memory:
          336 MB          mds_stores
          180 MB          com.apple.IconServicesAgent
          180 MB          Mail
          172 MB          Finder
          147 MB          softwareupdated
Virtual Memory Information:
          2.51 GB          Free RAM
          2.96 GB          Active RAM
          1.18 GB          Inactive RAM
          1.34 GB          Wired RAM
          2.37 GB          Page-ins
          0 B          Page-outs

Monitor calibration problems after installing windows 8.1

I have a hp envy m6-1105tx and right after installing windows 8.1 my monitor changed completely.
When i have a photo open in photoshop tones, colors luminosity, gamma etc are all wrong. Before i never had problems, when i looked at a photo in photoshop and i will see the photo on a different screen it would be basiclally identical but now the photo in photoshop is much different than the actual photo, and this doesn't apply only to photoshop but to everything. I already try to do the calibration through the control panel but it didn't improve the situation, is there a way to get the screen back to the way it was before?
Thanks

Wehodancer, welcome to the forum.
I checked for an updated driver for the video, but there is none for Win 8.1. Therefore, I suggest installing the original driver for the video to see if it helps. It may be that it was corrupted during the update process.
Please click "KUDOS" if I have helped you and click "Accept as Solution" if your problem is solved.
Signature:
HP TouchPad - 1.2 GHz; 1 GB memory; 32 GB storage; WebOS/CyanogenMod 11(Kit Kat)
HP 10 Plus; Android-Kit Kat; 1.0 GHz Allwinner A31 ARM Cortex A7 Quad Core Processor ; 2GB RAM Memory Long: 2 GB DDR3L SDRAM (1600MHz); 16GB disable eMMC 16GB v4.51
HP Omen; i7-4710QH; 8 GB memory; 256 GB San Disk SSD; Win 8.1
HP Photosmart 7520 AIO
++++++++++++++++++
**Click the Thumbs Up+ to say 'Thanks' and the 'Accept as Solution' if I have solved your problem.**
Intelligence is God given; Wisdom is the sum of our mistakes!
I am not an HP employee.

My external drive went dead after installing Leopard

Hey guys
I'm very bummed out, my external HD went dead after installing Leopard on my Dual 2.3 GHz PowerPC G5. It was working perfectly fine before, had not a single problem with it but now, I've just lost all my work. I tried Disk Utility from the disc with no luck, it gave tons of errors and it say it couldn't be repaired. Now, it doesn't show up at all. Every single time I connect it I get a message saying the disk I inserted is not readable by the computer. This is a 200GB Maxtor external drive. Is there anything I can do to fix it? Any hardcore Software to retrieve my files? I'd appreciate if anyone can help me with this.
Thank you in advance

Movies are currently a one time download. Because of this, it is your responsibility to back them up so when something like this happens, you can simply copy them over the new drive.
You can't download them again with purchasing once again.

After installing Time Capsule internet connection slow

Since I installed Time Capsule on my Mac, my internet connection started acting up. The web browsing is VERY SLOW, and applications that are web-based no longer work properly. For instance, I have an EyeFi Wireless Explore SD card and the related EyeFi Manager software that allows me to wirelessly transfer my photos on the eyefi card to the eyefi website, as well as my photo service (Kodak Gallery or Flickr) and also transfers the photos to my Mac. Before I set up my Time Capsule, the eyefi system worked flawlessly. Now the uploads hang up and do not complete. I also have very slow progress trying to use my webmail, or loading webpages in general. I use the Safari browser.
My Time Capsule is set up as a separate wireless network, so I access the internet thru my original home wireless network. Is anyone having the same issues after installing Time Capsule, and does anyone have a solution?

Try doing a Safe Mode reboot by holding down the Shift key when you hear the start-up tone. When the progress bar appears you can release the key. A Safe Reboot will clear some of the caches, it's possible one became corrupt. If that doesn't work do both a SMC and PRAM reset, you may need to do each 2-3x.
SMC RESET
Shut down the computer.
Unplug the computer's power cord and all peripherals.
Press and hold the power button for 5 seconds.
Release the power button.
Attach the computers power cable.
Press the power button to turn on the computer.
PRAM RESET
Shut down the computer.
Locate the following keys on the keyboard: Command, Option, P, and R. You will need to hold these keys down simultaneously in step 4.
Turn on the computer.
Press and hold the Command-Option-P-R keys. You must press this key combination before the gray screen appears.
Hold the keys down until the computer restarts and you hear the startup sound for the second time.
Release the keys.

Arch linux doesn't boot after installing AMD ATI Catalyst

I have a laptop which has a integrated graphic card intel 4th generation (4600) and an AMD ATI R9 m265x (hybrid Intel/AMD graphics card) so I have just installed AMD ATI Catalyst proprietary ones by following
AMD Catalyst ArchWiki.
I have used "Installing from the unofficial repository" method so in my pacman.conf I have added below entry for [catalyst-stable]:
[catalyst-stable]
Server = http://catalyst.wirephire.com/repo/catalyst/$arch
## Mirrors, if the primary server does not work or is too slow:
#Server = http://70.239.162.206/catalyst-mirror/repo/catalyst/$arch
#Server = http://mirror.rts-informatique.fr/archlinux-catalyst/repo/catalyst/$arch
#Server = http://mirror.hactar.bz/Vi0L0/catalyst/$arch
Then I have update pacman's database and install below packages:
catalyst-hook
catalyst-utils-pxp
lib32-catalyst-utils-pxp
(No need to install catalyst-total-pxp as I have installed catalyst-utils-pxp)
After installing it, I have configured the driver, configuring X using below command:
# aticonfig --initial
In order to use PowerXpress support I have installed catalyst-utils-pxp package plus additional lib32-catalyst-utils-pxp.
To perform a switch into Intel's IGP I have also installed the mesa-libgl package and Intel's drivers: xf86-video-intel and intel-dri .
I have enable the automatic update by enabling the catalyst-hook.service with below commands since it automatically rebuilds the fglrx modules while the system shuts down or reboots (so I haven't to do it manually each time kernel is updated using Catalyst-generator):
# systemctl enable catalyst-hook
# systemctl start catalyst-hook
And finally I have blacklisted radeon module by creating "/etc/modprobe.d/blacklisted.conf" file which content is:
blacklist radeon
and also I have ensured that fglrx line is added in "/etc/modules-load.d/Catalyst.conf" file.
To avoid problems, I have rebuilt the fglrx module by doing (I know it is not necessary as it is done by catalyst-hook):
catalyst_build_module all
Once I reboot, arch linux does not boot. Last lines printed out are below and then it freezes:
Starting temp files linker to catalyst...
Starting Catalyst event Daemon...
[ OK ] Started Catalyst event Daemon
Starting Catalyst's fglrx kernel' module builder...
[ OK ] Started temp files linker for catalyst.
[ OK ] Started Catalyst's fglrx kernel' modue builder.
[ OK ] Started gnome Display manager.
[ OK ] Started Network manager.
[ OK ] Reached target Multi-User system.
[ OK ] Reached target Graphical Interface.
[ OK ] Reached target Network.
I have tried to put nomodeset as a kernel parameter but it does not work. Also, after reading ArchWiki, I have noticed that it is recommended to don't do this as I am using catalyst-utils-pxp because intel driver needs it so I have removed nomodeset parameter from kernel but It continues not working.
Any ideas?
Package versions:
Kernel version 3.17.6-1-ARCH
catalyst-hook 14.12-1
catalyst-utils-pxp 14.12-1
lib32-catalyst-utils-pxp 14.12-1
xorg-server 1.16.2.901-1
xf86-video-intel 2.99.916-3
Last edited by toni (2014-12-13 19:38:38)

FInally I managed to boot arch linux.
I had to downgrade xorg-server from 1.16.2.901-1 to 1.15.2-1.
It seems there is a problem with Catalyst 14.12-1 and xorg-server 1.16.2.901-1.
Also I had to replace desktop manager from gdm to lightdm as gdm raises segmentation faults using xorg-server versions 1.16.2.901-1 and 1.15.2-1.
Finally I had to add an entry in pacman.conf:
[xorg115]
Server = http://catalyst.wirephire.com/repo/xorg115/$arch
## Mirrors, if the primary server does not work or is too slow:
#Server = http://mirror.rts-informatique.fr/archlinux-catalyst/repo/xorg115/$arch
#Server = http://mirror.hactar.bz/Vi0L0/xorg115/$arch
Then performs following actions:
1) # pacman -Syuu catalyst-hook catalyst-utils-pxp
2) Uninstall all the packages xf86* such as xf86-video-intel, xf86-input-evdev, xf86-input-synaptics, etc.
3) Install the packages uninstalled in step 2 and install them again using xorg115 repo, for example, # pacman -S xorg115/xf86-video-intel xorg115/xf86-input-evdev xorg115/xf86-input-synaptics
I have put a comment here.
Last edited by toni (2014-12-14 12:31:29)

Safari 5.1.2 Not working right after install

Hi, after installing the update for Snow Leopard safari is not working right. Some pages don't load, and other don't load correctly.
I have to keep hitting refresh two or three times. Also thunbnails are not displaying. Even the apple page comes up looking buggy.
Please help!

Please read this whole message before doing anything.
This procedure is a diagnostic test. It won’t solve your problem. Don’t be disappointed when you find that nothing has changed after you complete it.
The purpose of this exercise is to determine whether the problem is caused by third-party system modifications that load automatically at startup or login. First, disconnect all wired peripherals except keyboard, mouse, monitor, and Ethernet, if applicable. Boot in safe mode and log in as yourself. The instructions provided by Apple are as follows:
Be sure your Mac is shut down.
Press the power button.
Immediately after you hear the startup tone, hold the Shift key. The Shift key should be held as soon as possible after the startup tone, but not before the tone.
Release the Shift key when you see the gray Apple icon and the progress indicator (looks like a spinning gear).
During startup, you will see "Safe Boot" on the login screen, which appears even if you normally log in automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
Safe mode is slower than normal, and some things won’t work at all, perhaps including wireless networking on certain Macs. If you usually connect to the Internet via WiFi, and it doesn’t work in safe mode, connect using an Ethernet cable. If you can’t do that, reboot as usual (i.e., not in safe mode) and perform a safe login, as follows: Enter your credentials at the login screen, then hold down the shift key and click the “Log in” button. Keep holding the key until the menu bar appears. In this mode, your login items, among other things, won’t load.
In safe mode, test again. Same problem(s) now?
After testing, reboot (if you booted in safe mode) or log out/log in (if you performed a safe login) as usual.

After installing it, my macbook would not restart. All i would see is the Apple and the twirling circle. To get back to be able to use internet i had to put Snow Leopard disc holding "C" key.

I did a software update check. It showed to update to 10.6.8v1.1. After installing it, my MacBook would not restart.
I have tried this more than once. After the install all that happens is i get the Apple emblem and the twirling circle. I have let that go for literaly a couple hours with no results.
To get to be able to use my Macbook i have had to install Snow Leopard by holding the C" key and re-installing Snow Leopard.
Any help would be appreciated. i Have purchased "Lion" and cant access App Store to install until this update is done.
Very frustrating.
thanks in advance.

That's why you can't access the App Store. Minimum requirement is v10.6.6
Install this combo update > Mac OS X 10.6.8 Update Combo
Then restart your Mac, open the App Store.
You can download Lion by clicking Redeem under Quick Links right side of the App Store window then entering the redemption code.
You have checked to make sure your Mac can run v10.7 Lion? >>>> OS X Lion - Technical Specifications

After installing the mountain lion on my Mac at startup a stop sign appears and i cant loguin or do anything.. What should i do?

After installing the mountain lion on my Mac at startup a stop sign appears and i cant loguin or do anything.. What should i do?

If you mean the "no entry" sign, a circle with a slash through it, then you need to reinstall Mountain Lion.
Boot into the Recovery HD by holding down cmd-r at startup tone until gray screen.
From there, reinstall Mountain Lion.

I'm having problems with my internet connection after installing OS X Lion. Is this a known problem or just a local problem?

I'm having problems with my internet connection after installing OS X Lion. Is this a known problem or just a local problem?
After +/- 10 to 15min my connection is gone.
Does anyone have a sollution?

Lots of people are having the same problem, you're not the only one, belieeeeve me.
Just Googling the problem gets you tons of people complaining about the same thing, SOMETHING is up with Lion what wasn't happening with Snow Leopard. i just bought a new Imac and it CAME with Lion, so i started experiencing this internet dropout immediately.
It's been going on for the most of a year it looks like (at least by the dates from the threads i've been reading)
So your best bet is to fiddle with the System Preferences and read what other people have used to make theirs work. i'm doing that myself right now. I already posted a similar thread last night trying to figure out why my connection kept on dropping, i got a reply which linked me to a site. i followed the instructions there, so far so good, but i'm just being cautiously optimistic.
i'm gonna call Apple today and see if they've found anything, though seeing as this is a problem right out of the box there may not be an immediate solution. Good luck hunting for a solution :3
Site:
http://osxdaily.com/2011/11/06/lion-wi-fi-problems-solution-mac/?utm_source=feed burner&utm_medium=feed&utm_campaign=Feed%3A+osxdaily+%28OS+X+Daily%29&utm_conten t=FaceBook

After Installing ox lion, mac pro freezes after start up

so... just like the title says. after installing ox lion on my macbook pro ( i have snow leopard before. 4g memory), sometimes it freezes right after start up, and I could not click on anything, and i had to force it to shut down by holding the power button.
I don't know if anybody else have the same problem or not? is it a bug or something? hope it can be solved soon.....
Also, I have installed all the updates so far...

Please read this whole message before doing anything.
This procedure is a diagnostic test. It’s unlikely to solve your problem. Don’t be disappointed when you find that nothing has changed after you complete it.
The purpose of this exercise is to determine whether the problem is caused by third-party system modifications that load automatically at startup or login. Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards. Boot in safe mode and log in to the account with the problem. The instructions provided by Apple are as follows:
Be sure your Mac is shut down.
Press the power button.
Immediately after you hear the startup tone, hold the Shift key. The Shift key should be held as soon as possible after the startup tone, but not before the tone.
Release the Shift key when you see the gray Apple icon and the progress indicator (looks like a spinning gear).
Safe mode is much slower to boot and run than normal, and some things won’t work at all, including wireless networking on certain Macs.
The login screen appears even if you usually log in automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
Test while in safe mode. Same problem(s)?
After testing, reboot as usual (i.e., not in safe mode.)

Permissions problems after installing new hard drive

I backed up my old hard drive with SuperDuper!, then installed a new hard drive. When I tried to install my backup on the new hard drive with Disk Utility, it would work fine and then hang. It wouldn't finish, even overnight. So I installed a clean copy of leopard on the new hard drive, and then used Migration Assistant to move everything over from my backup. Worked great, until I actually tried to use the computer. Tons of permissions issues, mail and address book wouldn't run, Skype won't run even after installing an upgraded version, etc. What's weird, is my main account is an administrator account, but logging on as root and trying to remove admin permissions from my main account, the checkbox is greyed out! I also don't have a UID 501 on the system. I'm 502, and my wife's account is 503. I can't fix permissions from the finder, and in certain cases can't get them changed in terminal logged in as root. I don't know how to get my data from my old hard drive (which is running 10.5.1) to my new hard drive (also 10.5.1) Please help me! Thanks.

Hey Shawn,
Have you looked at the permissions with "Get Info"? Are they listed as belonging to "unkown user"?
First of all, see the Apple doc <href="http://docs.info.apple.com/article.html?artnum=306876">Administator user changed to standard.
After you clear that up, you'll probably have to remove the "unkown user" and add your user as the owner of all your folders. During that process, finder will probably crash. At that point, try running <a href="http://discussions.apple.com/thread.jspa?messageID=5670342#5670342>this terminal command described in "mlaster's" second posting.
Good luck!
CMF

Sites I visit most often won't work immediately after installing Leopard

Immediately after installing Leopard the three sites I visit most often won't pull up at all. They just show an error as if the MacBook isn't connected to the internet.
Other sites pull up fine.
These three sites I am trying to visit pull up fine on other computers.
These three sites won't work regardless of what wireless network I'm on.
The problem is exactly the same between Firefox and Safair.
What suggestions do you have or where can I start?
Thanks a ton guys

Figured it out. I have a program called SelfControl that helps block sites that you find yourself killing a lot of time on. Well after the update it appears that it was somehow activated and thus wouldn't allow those sites to come through. Unique problem.
All fixed now.

After installing phtoshop cs6 cc my other software like silver efex is missing as well as others.

After installing Photoshop cc my other software is missing. Silver efex and others.

I think it is Google.
There are a ton of links if you Google Move Nik plug-in from CS6 to CC
We also get asked about OnOne and Topaz products, and I believe you have to download the most recent versions for those to work in CC.

Redeeming tones after installing 8.1.2

Similar Messages

Maybe you are looking for