Redermnation of output medium when PO changes are made

Hello,
We used to have fax medium for PO output and now it is retired. But when we change old POs, the fax output is getting determined even though output medium is already changed in the output condition records. When we create new POs, the outputs are correctly determined with new medium. Is there any way to determine new output medium when PO is changed?
Thanks a lot,
Venu

Hello Pavan,
'Fine-Tuned Control: Purchase Order' is already configured for 'New' & 'Change' operations for the output type.
Thanks,
Venu

Similar Messages

The Change time of the file is getting modified when no changes are made to the file content

While doing save operation of a MS-WORD file, (in my example "1M.doc" ) with client (Windows 8) and server(either Win 2008 R2 or Win2012 R2). Observing the following scenario.
After Renames are done(eg, xx.tmp renamed to 1M.doc) , all the file handles are being closed one by one.
When the xx.tmp file is closed, immediately followed by Create of 1M.doc, the LastWrite time values between Close and Create are same but LastChanged time values are different. The LastChanged and LastWrite times are noted from
the Close Response and Create Response packets.
No modification is done on the file between this last close and next create. So, why LastChanged time values are different for the file? We are observing this almost everytime with Win8- Win2k8R2/Win2012R2, but not observed
till now with Win8-Win2012.

Hi,
Is only word files have the issue? You could refer to the articles below to troubleshoot the issue:
The "Modified time" file attribute of a registry hive file is updated when an application loads and then unloads the registry hive file without making any changes on a computer that is running Windows Server 2008 R2 or Windows 7
http://support.microsoft.com/kb/983544
File “Date modified” property are not updating while modifying a file without closing it.
http://blogs.technet.com/b/asiasupp/archive/2010/12/14/file-date-modified-property-are-not-updating-while-modifying-a-file-without-closing-it.aspx
Regards,
Mandy
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

No prompt to check in file when no changes are made

Hi,
Now I know what you are thinking, why check out if you do not need to make any changes and I would say that is a valid point. But this scenario is more prone to cropping up than you think. Imagine a user is sent a link to document in a library. They click
the link > check out and then close after just reading the document. That file is now checked out and prevents someone who actually needs to edit the file from editing it.
Steps to re-produce:
Launch file from document library
Check out using the info bar
Close the application via the X in the top right hand corner.
The application will close and the file will remain checked out and at no point was the user prompted to check in the file.
Now I have seen a similar post saying that the above behaviour is by design but to relay this back to my end user with confidence do we have any official Microsoft documentation out there to state this fact please?
Any help would be more than greatly appreciated :)

Hi Henry,
This is the by default behavior, I haven't seen a good way to due with this issue, I would suggest you to disable require document check out if it is not necessary for the library.
Also, you can consider using a timer job, to check the document with status of check out, then send reminder to the user who check out the document, let the user check in the document in time.
Thanks,
Qiao
Forum Support
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact
[email protected]
Qiao Wei
TechNet Community Support

ICal does not update when calendar changes are made on all my other devices. Prompt that the server does not recognize the password, but the password is correct.

I have an iPhone 5, iPhone 5s, MacBook Air and recently bought an iPad Air. Since I synced my iPad, my iCal on my Macbook no longer updates and every time I open it, this window appears even if I didn't change or forget my password. So I tried changing my password and still this window appears. I hope someone can help me. Thanks!

As if by magic it is now working. I went away from the mac for a couple of hours, came back and it started to work. This is scary as I would expect this kind of action on a Mickysoft machine but not a Mac. Ho Hum - at least the problem has been sorted even if I don't know how.
Chris

Clear IDOC creation when only header level changes are made ME22N.

Hi All,
when the PO is on changed in the header level only(for example header texts and header code) and when we execute RSNAST00 one BADI getts triggered which checks if the Item category is 9 and badi will clear the IDOC creation.
If the PO item category is = 9, the IDOC must not be created. This badi works fine if the changes are made at
1)at Item level
2)both header level and Item level
In case of 1 and 2 we have both header segment E1EDK01 and item segments E1EDP01.As a result it checks for the item category in the item segment.so idoc is not created.
3)BADI is not working when the changes are made at the header level only. The IDOC is getting created even though the PO has the item category as 9.
I found in this case only header segments are availble while debugging and the item segments are not there to check the condition for the item category.
Please any one can suggest me possible solutions to clear idoc creation when only header level changes are made ME22N.
The BADI used is as below.
DATA : lwa_data TYPE edidd.
DATA : lw_dp01 TYPE e1edp01.
DATA : lwa_control TYPE edidc.
CHECK idoc_control-rcvprn = '3PL' AND idoc_control-idoctp = 'ORDERS05'.
LOOP AT idoc_data INTO lwa_data.
    IF lwa_data-segnam = 'E1EDP01'.
      lw_dp01 = lwa_data-sdata.
      IF lw_dp01-pstyp = '9'.
        CLEAR create_idoc.
      ENDIF.
    ENDIF.
ENDLOOP.
ENDMETHO
Thanks in advance.

Hi all,
Is there any way that I can get the item category details when Only header level changes are made to the PO in ME22N and only header segments are available in the IDOC.
Is this possible:- Fetch the po number and item category details from ekpo table that matches with the header segment po number and then check for item category value to clear the idoc creation?
Any information is helpfull.
Edited by: Selina.selk on Nov 20, 2009 1:39 PM
Edited by: Selina.selk on Nov 20, 2009 2:49 PM

Automatic Output Message when Changes are made to a PO

Hi Gurus,
I would like to know to to set up automatic print or fax for PO output once changes are made to it. I was able to send automatic print/fax when i create a new PO. But when that same PO is changed, i still need to go to ME9F to fax it. Is there a way to make it automatic?
Thanks,
Jograd

Hi Greetings
would like to know to set up automatic print or fax for PO output once changes are made to it. I was able to send automatic print/fax when i create a new PO. But when that same PO is changed, i still need to go to ME9F to fax it. Is there a way to make it automatic?
You need to make the following u201CFine-Tune controlu201D settings for the output type so that output will be generated automatically once changes are made.
ONLM --> Messages --> Output control --> Message types -->Define Message Types for Purchase Order --> Fine-Tuned Control: Purchase Order --> Include indicator 2. Printout of changes for the output type.
Gobinthan G

To trigger congen_obj_wrt when any changes are done in Capgen_obj_wrt

Hi ,
I would like to know if there is any mechanism to trigger an congen_obj_wrt when changes are made to the organization(capgen) even for change in fields like name1 or address .
There is "is contact person of " relationship maintained for the cp(congen ) and the organization (cap ) .
I would like to trigger a congen_obj_wrt as soon as any changes are made to capgen_obj_wrt if the relationship exists .

Hi,
try the user exit EXIT_SAPLV56U_004.
use the following tables parameters of this function module to determine whether the values are changed:
I_XVTTK - Shipment Headers (Current)
I_YVTTK - Shipment Headers (Old)
I_XVTTS - Shipment Stages (Current)
I_YVTTS - Shipment Stages (Old)
if any change is made to any of the fields, you can trigger the standard output type by using the function module WFMC_MESSAGE_SINGLE. you will have to pass a structure of type NAST with the required vlaues.
try this...
cheers
jubin

Shared Reminders: How do I stop getting emails when changes are made?

My wife and I both have iPhone 5's that we bought 2 weeks ago. We are sharing a calendar and a "Grocery" list in reminders. I have everything set up where it is working properly but I keep getting emails when a change is made to the grocery list. I don't get emails when there are changes to the calendar.
I want to stop getting emails when there are changes made to our grocery list but I am not sure how to do it. We both have icloud accounts and we both have checked the box under preferences in my calendar for "in app notifications" for icloud invitations. When I open Reminders in icloud I don't see a preferences for reminders.
If it helps , or makes any difference, my wife has a yahoo mail account and I have a hotmail account. She does not get emails about changes being made.
thanks

Did you try to switch Push "off" and fetch to "manually"? This way no mail is delivered until you choose to open the mail app. The moment you open Mail on your device, your mail account will be checked and if any, mail will be delivered.
Fetch New Data
This setting lets you turn Push on or off for MobileMe, Microsoft Exchange, Yahoo!, and any other push accounts on iPhone. Push accounts deliver new information to iPhone whenever new information appears on the server (some delays may occur). You might want to turn Push off to suspend delivery of email and other information, or to conserve battery life.
When Push is off, and with accounts that don’t support push, data can still be fetched—that is, iPhone can check with the server and see if new information is available. Use the Fetch New Data setting to determine how often data is requested. For optimal battery life, don’t fetch too often.
Turn Push on: Choose “Mail, Contacts, Calendars” > Fetch New Data, then tap to turn Push on.
Set the interval to fetch data: Choose “Mail, Contacts, Calendars” > Fetch New Data, then choose how often you want to fetch data for all accounts.
To conserve battery life, fetch less frequently.
Setting Push to OFF (or setting Fetch to Manually on the Fetch New Data screen) overrides individual account settings.
page 203 iPhone_User_Guide
Message was edited by: Ingo2711

HT1923 what hard drive changes are made when downloading i-tunes 10.6 upgrade

what hard drive changes are made to my computer when downloading the i-Tunes 10.6 upgrade / update?
what registry changes does it make, if any?

Ok, so as far as the hard drive goes, go for the biggeset one you can afford/need. 500 gb, should be plenty big for just about anybody. But as for the speed of the drive.... Yes, a 7200 rpm drive will drain the battery life much quicker than a 4200 rpm drive or even a 5400 rpm drive. Apple has been shipping 4200 rpm drives as a standard for ever practically, and recently made the 5400 rpm the new standard with the 7200 as an option. More important than the physical speed is the buffer size. A nice big buffer will provide quicker access to data and not eat into your battery life. Then there is also the option of an SSD (solid state drive), but those are still crazy expensive.
I've read any Serial ATA drive is compatible with the drop sensor. I upgraded my hard drive with a Seagate, and it works great. Apple generally ships Toshiba drives in their laptops.
replacing a hard drive can be a bit of work. First of all it will void your warranty (But your is obviously expired anyways) It is pretty complicated and takes a lot of patience. iFixit has great step by step instructions. here's a link : http://www.ifixit.com/Device/MacBookPro_15%22_Core_2_Duo_Models_A1226_andA1260
Hope this helps

Why Synonym becomes INVALID when changes are made on the related object ?

Hi all,
WHY SYNONYMS becomes invalid when changes are made on related OBJECTS ?
Is there any specific reasons for this.?
Is there any method or procedures to make the synonym VALID as soon as the we perform any alteration on the related object.
Thanks
Himabala

Synonym will be validated when it is accessed, no need to take an action.

Do we have to Bounce Apache evertime JSP changes are made ?

Hi all
Do we have to Bounce Apache evertime JSP changes are made ?
I am making a change in my JSP change (changing a sql query and adding a display text which is static) but the changes are not getting reflected when I upload the page to my server. Do I have to bounce the server everytime I make a change to a JSP Page?
Regards Ali

Hi
Wich version of Oracle Application Server are you?
regards

I am having trouble with an excel file wanting to save when no changes were made & opening as read only for the 2nd person - but allowing them to save the file.

1) I am having trouble with an excel file wanting to save when no changes were made. As soon as you open the file and exit. It prompts for a save.
All excel versions are 15.0.4701.1002.
Using a table.
the functions CELL, OFFSET, TODAY, INDIRECT, NOW, INFO and RAND are not being used.
2) Same file. 2nd person is being told they are opening the file as read only - but when they are quitting excel prompts them to save the file.
Everything was working fine. I started having problems with Excel, IT wiped my version out and re-installed office.
File is on networked server HP - Windows Server 2012 Essentials.
We are all on Windows 8.1 Pro.
I really hope someone can help - the excel expert had no answer - and passed me along to here.

I copied the whole file and started deleting worksheets one at a time and testing it by closing it and re-opening it then closing it again – to see if it wanted to save.
Once all the pivot tables were deleted – the problem went away.
I found that some of the pivot tables had automatic refresh upon open, so this caused the excel to think data had changed.
It is fixed now. By clicking on one cell of the pivot table, analyze, options, data and uncheck the 3<sup>rd</sup> square down to not automatically refresh. NOT A NETWORK ISSUE.

IWeb will not Publish. The publish icon stays red and no changes are made. Please help.

The question says everything. When I click "publish site," the world icon at the top of the screen stays red (instead of whirling about and turning blue), and no changes are made. When I exit the program, it says, do you want to exit while changes are still being made?
This is confusing, since nothing seems to be uploading according to the icon. The website really needs to be updated and I welcome and appreciate any and all help. Thank you.

See this page for an axample of publishing settings...
http://www.iwebformusicians.com/iWeb/Publish-Website.html
If this doesn't get things going try the second method - publishing to a local folder - to see if that works.
See this page for more troubleshooting info...
http://www.iwebformusicians.com/iWeb/iWeb-Tips.html
... and this one for info about using iWeb with Lion/Mountain Lion...
http://www.iwebformusicians.com/iWeb/mountain-lion.html

Orders to stay release (VKM3) even if changes are made to the order

Hi,
Is there a setting to keep the sales orders in released status once the order is release for credit through VKm3.
That is even if the order is release if you make any changes to the order it goes back to credit blocked status.
Is there any way to stop this from happenin. I want the order stay released even if any changes are made to the order once a release has been done in VKm3.
Thanks
Keshi

Hi,
Go to the transaction code OVAK,
Select the correct Credit group and risk category and enter into the features of this combination.
Here if you check the fields, you can find that there are certain fields which decides whathappens to a sales order when it is released from credit block and then some changes made.
You can configure these fields to enable your functionality. As I am in different network now, I am not able to give u the correct fields.
But as per the functionality, it should ideally block the order because the change can even be in price , that is the Credit exposure itself. Hence it should ideally block.
Hope this helps you to decide.

Some output types are adding in messages when the changes are done

Hi Friends,
In PO, some output types(which are already there in display mode in messages) are adding in EDIT mode in messages when I change any thing in Purchase order(ME22N). Some outputs are not adding.
Example, i have created two output types (AAA and BBB) successfully in ME22n. Now i am changing some thing in PO and going to MESSAGES. Now I am seeing one extra output type AAA is added in MESSAGES with EDIT mode, But i am seeing output type BBB is in display mode and also not added extra.
Could you please tell me, what is the reason for this?
Thanks
Kumar

Hi Kumar,
Looks like your Question is not pertaining to SAP-MDM.
This forum is for SAP Master data management queries .
Kindly post your question in the right forum to get quick replies.
Hope It Helped
Thanks & Regards
Simona

Redermnation of output medium when PO changes are made

Similar Messages

Maybe you are looking for