Redhat Linux Enterprise edition 6.4

Hi folks,
please can one suggest me where can i download redhat linux 6.4 for training purpose.thanks
Regards.

AmitGargOCE wrote:
There are lots of Torrent Download available for redhat linux 6. Just search in google. Agree with Dude! to use OEL6 for learning. It is almost same.
Thanks
Amit
And they are each and every one illegal.
Use OL6 (the 'E' was dropped years ago), which is current and free for any purpose.

Similar Messages

  • Installation of Oracle 8.1.17 on Redhat Linux Enterprise Edition 2.4

    dear all
    I have tried to Oracle 8.1.17 on Redhat Linux Enterprise Edition 2.4 but it gives an error "Error in invoking target make file .."
    I tried using retries it failed each time to prorceed.
    I checked for my binutils ( binutils-2.14.90.0.4-26 ) but mine are higher than binutils-2.11.90.0.8-13.i386.rpm required ..
    do i need to down grade my binutils for 8.1.7
    abhi

    Hi Abhi!
    If I remember correctly (817 is stone age) the binutils used a strange debug flag in the 2.11.90.0.8-13 (something with -z).
    If this is not present in your newer version of the binutils the make will fail.
    Try downgrading the binutils during the installation.
    cu
    Andreas

  • How to install in linux Enterprise Edition 6.0

    How to install in linux Enterprise Edition 6.0

    Hi Dipendra,
                         For running the Adobe application You need to configure some thing in both Java as well as in ABAP stack for that abobe form application to work. You need to do some configuration in the Visual administrator for Java & also in the ABAP stack sidi using your SAP user id line creating ADSUSER , ADS_AGENT    user id creation and roles assignment and RFC destination creation etc..          
    Just refer these documents for the installation and post-configuration of Adobe Document Service on NW2004s.
    https://websmp105.sap-ag.de/~sapdownload/011000358700003982082006E/InstallADSNW2004s_Jun06.pdf
    https://websmp105.sap-ag.de/~sapdownload/011000358700005526362005E/ADS_NW2004s_SPS12.pdf
    https://websmp105.sap-ag.de/~sapdownload/011000358700005299622006E/ADS_SizingNW2004sV2_1.pdf
    You can start by read the note 736902 to get the credentials for the ADS.
    Hope this answers your question.
    Thanks,
    Greetson

  • Install forms6i and report 6i on Red Hat Linux Enterprise edition 4.0.2

    Dear All
    we want to install forms 6i and reports 6i on Red Hat linux enterprise edition 4.0.2
    if any person have step by step guide pl share with me
    Thanks

    such an old forms version on Red Hat 4 ? Please check first, if this is certified by Oracle
    metalink.oracle.com - Region Certifications
    can't you use the new Oracle Forms 10g ?

  • Can you install Oracle 10g on REDHAT LINUX ENTERPRISE WS?

    According to oracle documentation, it says you can install oracle10g on Redhat enterprise version 3 or 4, but it doesn't specify whether its Red Hat Enterprise Linux AS or WS. Can you install oracle 10g on Rehat Linux Enterprise WS?

    Oracle Certificaction Matrices says only RedHat AS/ES is supported for database. AFAIK WS means workstation.
    Also this link is very clear: http://kbase.redhat.com/faq/FAQ_61_1135.shtm
    Besides the above sentences... If the WS installation is providing all required packages (listed in installtion prerequisites) I belive that Oracle DB could be installed on WS but as I (and the above link) said it is not officialy supported.

  • Redhat Linux Enterprise 6 On T520

    Hi
    I have installed Redhat Enterprise 6 on my Lenovo T520  everything works fine except wireless i have copied
    iw​lwifi-6000g2a-ucode-17.168.5.3 into the /lib/firmware and rebooted ... nothing wireless is not working.
    Please any advise.
    thanks

    Hi
    Thank for the reply, i am very sorry i was busy during the holidays.
    here is the output of what you requested :
    #lspci
    00:00.0 Host bridge: Intel Corporation Sandy Bridge DRAM Controller (rev 09)
    00:01.0 PCI bridge: Intel Corporation Sandy Bridge PCI Express Root Port (rev 09)
    00:02.0 VGA compatible controller: Intel Corporation Sandy Bridge Integrated Graphics Controller (rev 09)
    00:16.0 Communication controller: Intel Corporation Cougar Point HECI Controller #1 (rev 04)
    00:16.3 Serial controller: Intel Corporation Cougar Point KT Controller (rev 04)
    00:19.0 Ethernet controller: Intel Corporation 82579LM Gigabit Network Connection (rev 04)
    00:1a.0 USB Controller: Intel Corporation Cougar Point USB Enhanced Host Controller #2 (rev 04)
    00:1b.0 Audio device: Intel Corporation Cougar Point High Definition Audio Controller (rev 04)
    00:1c.0 PCI bridge: Intel Corporation Cougar Point PCI Express Root Port 1 (rev b4)
    00:1c.1 PCI bridge: Intel Corporation Cougar Point PCI Express Root Port 2 (rev b4)
    00:1c.3 PCI bridge: Intel Corporation Cougar Point PCI Express Root Port 4 (rev b4)
    00:1c.4 PCI bridge: Intel Corporation Cougar Point PCI Express Root Port 5 (rev b4)
    00:1d.0 USB Controller: Intel Corporation Cougar Point USB Enhanced Host Controller #1 (rev 04)
    00:1f.0 ISA bridge: Intel Corporation Cougar Point LPC Controller (rev 04)
    00:1f.2 SATA controller: Intel Corporation Cougar Point 6 port SATA AHCI Controller (rev 04)
    00:1f.3 SMBus: Intel Corporation Cougar Point SMBus Controller (rev 04)
    01:00.0 VGA compatible controller: nVidia Corporation Device 1057 (rev a1)
    03:00.0 Network controller: Intel Corporation 6000 Series Gen2 (rev 34)
    0d:00.0 System peripheral: Ricoh Co Ltd Device e823 (rev 05)
    0d:00.3 FireWire (IEEE 1394): Ricoh Co Ltd Device e832 (rev 04)
    #lsmod
    Module                  Size  Used by
    vfat                   10646  1
    fat                    55086  1 vfat
    usb_storage            49386  1
    fuse                   66138  2
    ebtable_nat             1975  0
    ebtables               18101  1 ebtable_nat
    xt_CHECKSUM             1269  1
    iptable_mangle          3283  1
    ipt_MASQUERADE          2400  3
    iptable_nat             6124  1
    nf_nat                 22788  2 ipt_MASQUERADE,iptable_nat
    bridge                 74113  0
    stp                     2107  1 bridge
    llc                     5608  2 bridge,stp
    autofs4                27683  3
    sunrpc                241630  1
    cpufreq_ondemand       10382  4
    acpi_cpufreq            8593  1
    freq_table              4847  2 cpufreq_ondemand,acpi_cpufreq
    xt_physdev              1707  1
    ipt_REJECT              2349  4
    nf_conntrack_ipv4       9440  6 iptable_nat,nf_nat
    nf_defrag_ipv4          1449  1 nf_conntrack_ipv4
    iptable_filter          2759  1
    ip_tables              17733  3 iptable_mangle,iptable_nat,iptable_filter
    ip6t_REJECT             4562  2
    nf_conntrack_ipv6      19655  2
    xt_state                1458  5
    nf_conntrack           79643  6 ipt_MASQUERADE,iptable_nat,nf_nat,nf_conntrack_ipv​4,nf_conntrack_ipv6,xt_state
    ip6table_filter         2855  1
    ip6_tables             19392  1 ip6table_filter
    ipv6                  321209  46 ip6t_REJECT,nf_conntrack_ipv6
    dm_mirror              14003  0
    dm_region_hash         12200  1 dm_mirror
    dm_log                 10088  2 dm_mirror,dm_region_hash
    kvm_intel              45674  0
    kvm                   291811  1 kvm_intel
    uinput                  8182  0
    wmi                     6221  0
    sg                     30186  0
    uvcvideo               61644  0
    videodev               38980  1 uvcvideo
    v4l2_compat_ioctl32     7145  1 videodev
    i2c_i801               11190  0
    iTCO_wdt               11708  0
    iTCO_vendor_support     3022  1 iTCO_wdt
    snd_hda_intel          25194  2
    snd_hda_codec          82097  1 snd_hda_intel
    snd_hwdep               6746  1 snd_hda_codec
    snd_seq                56557  0
    snd_seq_device          6626  1 snd_seq
    snd_pcm                84700  2 snd_hda_intel,snd_hda_codec
    snd_timer              23087  2 snd_seq,snd_pcm
    snd                    70021  11 snd_hda_intel,snd_hda_codec,snd_hwdep,snd_seq,snd_​seq_device,snd_pcm,snd_timer
    soundcore               8052  1 snd
    snd_page_alloc          8628  2 snd_hda_intel,snd_pcm
    e1000e                140051  0
    ext4                  353979  3
    mbcache                 7918  1 ext4
    jbd2                   89033  1 ext4
    sr_mod                 16162  0
    cdrom                  39769  1 sr_mod
    sd_mod                 37221  5
    crc_t10dif              1507  1 sd_mod
    ahci                   39105  2
    firewire_ohci          24867  0
    firewire_core          50853  1 firewire_ohci
    crc_itu_t               1683  1 firewire_core
    nouveau               537914  0
    ttm                    46942  1 nouveau
    drm_kms_helper         32113  1 nouveau
    drm                   200778  3 nouveau,ttm,drm_kms_helper
    i2c_algo_bit            5664  1 nouveau
    video                  20966  1 nouveau
    output                  2471  1 video
    i2c_core               31274  6 videodev,i2c_i801,nou
    # rpm -qa wireless-tools
    wireless-tools-29-5.1.1.el6.x86_64
    # /etc/sysconfig/network-scripts/ifup-wireless
    #!/bin/bash
    # Network Interface Configuration System
    # Copyright (c) 1996-2009 Red Hat, Inc. all rights reserved.
    # Based on PCMCIA wireless script by (David Hinds/Jean Tourrilhes)
    # This program is free software; you can redistribute it and/or modify
    # it under the terms of the GNU General Public License, version 2,
    # as published by the Free Software Foundation.
    # This program is distributed in the hope that it will be useful,
    # but WITHOUT ANY WARRANTY; without even the implied warranty of
    # MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
    # GNU General Public License for more details.
    # You should have received a copy of the GNU General Public License
    # along with this program; if not, write to the Free Software
    # Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA
    # Configure wireless network device options.  See iwconfig(8) for more info.
    # Valid variables:
    #    MODE: Ad-Hoc, Managed, etc.
    #    ESSID: Name of the wireless network
    #    NWID: Name of this machine on the network.  Hostname is default
    #    FREQ: Frequency to operate on.  See CHANNEL
    #    CHANNEL: Numbered frequency to operate on.  See FREQ
    #    SENS: Sensitivity threshold for packet rejection.
    #    RATE: Transfer rate.  Usually one of Auto, 11, 5, 2, or 1.
    #    KEY: Encryption key for WEP.
    #    RTS: Explicit RTS handshake.  Usually not specified (auto)
    #    FRAG: Fragmentation threshold to split packets.  Usually not specified.
    #    SPYIPS: List of IP addresses to "spy" on for link performance stats.
    #    IWCONFIG: Extra parameters to pass directly to IWCONFIG
    #    SECURITYMODE: Security mode, e.g: 'open' or 'restricted'
    #    IWPRIV: Extra parameters to pass directly to IWPRIV
    # Only meant to be called from ifup.
    # Mode need to be first : some settings apply only in a specific mode !
    if [ -n "$MODE" ] ; then
        iwconfig $DEVICE mode $MODE
    fi
    # Set link up (some cards require this.)
    /sbin/ip link set dev ${DEVICE} up
    # This is a bit hackish, but should do the job right...
    if [ -n "$ESSID" -o -n "$MODE" ] ; then
        NICKNAME=$(/bin/hostname)
        iwconfig $DEVICE nick "$NICKNAME" >/dev/null 2>&1
    fi
    # Regular stuff...
    if [ -n "$NWID" ] ; then
        iwconfig $DEVICE nwid $NWID
    fi
    if [ -n "$FREQ" -a "$MODE" != "Managed" ] ; then
        iwconfig $DEVICE freq $FREQ
    elif [ -n "$CHANNEL" -a "$MODE" != "Managed" ] ; then
        iwconfig $DEVICE channel $CHANNEL
    fi
    if [ -n "$SENS" ] ; then
        iwconfig $DEVICE sens $SENS
    fi
    if [ -n "$RATE" ] ; then
        iwconfig $DEVICE rate "$RATE"
    fi
    if [ -n "$KEY" -o -n "$KEY1" -o -n "$KEY2" -o -n "$KEY3" -o -n "$KEY4" ] ; then
        [ -n "$KEY1" ] && iwconfig $DEVICE key "[1]" $KEY1
        [ -n "$KEY2" ] && iwconfig $DEVICE key "[2]" $KEY2
        [ -n "$KEY3" ] && iwconfig $DEVICE key "[3]" $KEY3
        [ -n "$KEY4" ] && iwconfig $DEVICE key "[4]" $KEY4
        [ -n "$DEFAULTKEY" ] && iwconfig $DEVICE key "[${DEFAULTKEY}]"
        [ -n "$KEY" ] && iwconfig $DEVICE key $KEY
    else
        iwconfig $DEVICE key off
    fi
    if [ -n "$SECURITYMODE" ]; then
        iwconfig $DEVICE enc $SECURITYMODE
    fi
    if [ -n "$RTS" ] ; then
        iwconfig $DEVICE rts $RTS
    fi
    if [ -n "$FRAG" ] ; then
        iwconfig $DEVICE frag $FRAG
    fi
    # More specific parameters passed directly to IWCONFIG
    if [ -n "$IWCONFIG" ] ; then
        iwconfig $DEVICE $IWCONFIG
    fi
    if [ -n "$SPYIPS" ] ; then
        for IP in $SPYIPS; do
          iwspy $DEVICE + $IP
        done
    fi
    if [ -n "$IWPRIV" ] ; then
        iwpriv $DEVICE $IWPRIV
    fi
    # ESSID need to be last : most device re-perform the scanning/discovery
    # when this is set, and things like encryption keys are better be
    # defined if we want to discover the right set of APs/nodes.
    if [ -n "$ESSID" ] ; then
        iwconfig $DEVICE essid "$ESSID"
    else
        # use any essid
        iwconfig $DEVICE essid any >/dev/null 2>&1
    fi
    If you do have a switch/button to enable the WLAN, what is dumped to /var/log/messages when you press the button?
    No changes in the /var/messages..
    I have the machine is dual booting for windows 7 and redhat linux 6 64bit.

  • Oracle 10g Express Edition on RedHat linux Enterprise 4 WS

    Installed Successfully
    But when connecting in SQL Plus with any user sys or system or scott
    it gives error
    error while loading shared libraries : libaio.so.1 cannot open shared object file
    no such file or directory
    ORA 12547: TNS lost connect
    Message was edited by:
    ashish

    Get the source file from
    bash $ wget ftp://rpmfind.net/linux/redhat/enterprise/3/en/os/i386/SRPMS/libaio-0.3.96-3.src.rpm
    than
    bash $ rpmbuild --rebuild libaio-0.3.96-3.src.rpm
    this will build the rpm you need to install...
    the new RPM will be most prob. created in folder...
    /usr/src/redhat/RPMS/i386/libaio-0.3.96-3.i386.rpm
    and then install...
    rpm -ivh libaio-0.3.96-3.i386.rpm

  • Problem in Installing Oracle 10g on Linux Enterprise Edition RHEL 3

    Hi All,
    I am trying to install Oracle10g Rel 2 on RHEL 3, but the installer fails for some OS packages (rpms I think) for being of older edition like gcc etc.
    Whats the workaround for this or do I need to install for a more latest Version of Red Hat linux.
    Do advise.....
    Regards,
    Gaurav S.

    1. you can upgrade the packages (better option)
    2. you can start installer with -ignoreSysPrereqs

  • Jinitiator for Red Hat Linux Enterprise Edition 3

    Hello Technocrats,
    I need your reply for our very critical situation asap.
    We have Red Hat Linux EE 3 hosted in all developers PC. Oracle Application 11.5.5 is hosted in a Sun Ultra1 server. Now we have licence for Oracle Developer Suite 10g for RH Linux 3.
    My question is , will Oracle Jinitiator for the OS compatible be installed at time of iDS installation??
    do we need to grab any specific Oracle Jinitiator for E-Business Suite in this regard??
    Is Oracle Jinitiator avbl for Linux platforms. If not wat will be the solution for executing a E-Business module form in a Mozilla web browser in Linux Pc's
    Kindly give all your valuable suggestions asap....... awaitng your reply

    See http://www.oracle.com/technology/products/forms/htdocs/10g/clientsod_forms10g.html for information on officially supported configs.
    The only certification I can see for Redhat is using Sun JPI 1.4.2. The Sun JPI certification was added with the latest patchset (9.0.4.2.0). I know Oracle was planning on certifying Forms 10.1.2 for Sun JPI 1.4.2 and 1.5, but I'm not sure if they managed in the end. Forms 10.1.2 is already available.
    We decided to go for Sun JPI and not JInitiator because we have hundreds of external users. Their sysadmins are much more comfortable installing Sun JPI then they are installing the (unknown) Oracle JInitiator.
    I've written a number of blog articles about our Sun JPI confguration at http://www.oratransplant.nl/category/oracle/forms/

  • Oracle Text index hangs(Oracle 11g linux enterprise edition)

    Hi guru,
    One very criticial and showstopper issue coming in Oracle Text Indexing.
    I have table ResourceTable(ResId,Contents blob ,docformat)
    I am creating text index on Contents column by using follwing command:
    create index [IndexName] on [TableName] (contents) indextype is ctxsys.context ('lexer mylex stoplist ctxsys.default_stoplist format column ISDOCFORMAT sync(every "sysdate+1/24") storage my_text_storage memory 200M')parallel 2
    I found there is one document of text/html type which hangs oracle text indexing thread.Oracle doest not give any error message keep using CPU 100% and no progress.
    I then create test table with same stucture and put this corrupted documet record in this table.and did indexing again but its not doing index /not ignoring it and hangs .We have also tried to use timeout feature of inso filter so that if such type of document comes at the time of indexing oracle text indexing process will bypass it after specific time interval but still same issue comes and oracle is not bypassing such faulty document.
    This is realy show stopper issue and any kind of help will be greatly appricited.

    You need to raise an SR with Oracle Support for this, and send them the file which is causing the hang. It should then be easy to investigate the problem and schedule a fix.
    If you don't have a support contract, you could send the file to me and I'll raise a bug. However, if we fix it you won't be able to get the fix until it appears in the next downloadable version.
    - Roger
    roger.ford @ oracle.com

  • Cannot install Tuxedo8.1 on RedHat Linux 9.0

    I encounterd an error during install Tuxedo8.1 on RedHat Linux 9.0
    cf, Tuxedo8.1 is downloaded from your download sites for trial.
    [tuxedo@tuxedo-server install]$ sh tuxedo81_linux.bin
    Preparing to install...
    The included VM could not be uncompressed. Please try to download
    the installer again and make sure that you download using 'binary'
    mode. Please do not attempt to install this currently downloaded copy.
    I tried to install Tuxedo8.1 on Linux Enterprise Edition(tuxedo81_inlnxa21.bin).
    And It failed.
    Thans in advance

    eklee <[email protected]> wrote:
    I encounterd an error during install Tuxedo8.1 on RedHat Linux 9.0
    cf, Tuxedo8.1 is downloaded from your download sites for trial.
    [tuxedo@tuxedo-server install]$ sh tuxedo81_linux.bin
    Preparing to install...
    The included VM could not be uncompressed. Please try to download
    the installer again and make sure that you download using 'binary'
    mode. Please do not attempt to install this currently downloaded copy.
    I tried to install Tuxedo8.1 on Linux Enterprise Edition(tuxedo81_inlnxa21.bin).
    And It failed.
    Thans in advanceTry below commands in RH9,
    cd /bin
    ln -s gunzip uncompress
    then retry the installation process.
    Wei.C

  • Missing files in j2sdk1.4.2_05 in RedHat Linux EL3

    After installing j2sdk1.4.2_05 using the rpm as available on Sun's site I get the following missing files:
    missing /usr/java/j2sdk1.4.2_05/jre/javaws/javaws.pack
    missing /usr/java/j2sdk1.4.2_05/jre/lib/charsets.pack
    missing /usr/java/j2sdk1.4.2_05/jre/lib/ext/localedata.pack
    missing /usr/java/j2sdk1.4.2_05/jre/lib/jsse.pack
    missing /usr/java/j2sdk1.4.2_05/jre/lib/plugin.pack
    missing /usr/java/j2sdk1.4.2_05/jre/lib/rt.pack
    missing /usr/java/j2sdk1.4.2_05/lib/tools.pack
    missing /usr/java/j2sdk1.4.2_05/lib/unpack
    The OS is RedHat Linux Enterprise Linux version 3.
    The result is the same if I use j2re1.4.2_05 using the Sun's rpm. Thn the result is:
    missing /usr/java/j2re1.4.2_05/javaws/javaws.pack
    missing /usr/java/j2re1.4.2_05/lib/charsets.pack
    missing /usr/java/j2re1.4.2_05/lib/ext/localedata.pack
    missing /usr/java/j2re1.4.2_05/lib/jsse.pack
    missing /usr/java/j2re1.4.2_05/lib/plugin.pack
    missing /usr/java/j2re1.4.2_05/lib/rt.pack
    missing /usr/java/j2re1.4.2_05/lib/unpack
    I shall be obliged if somebody can tell me how to get rid of these missing statements or if there is some workaround.
    Regards
    Joydev Lahiri
    mailto: [email protected]

    missing /usr/java/j2sdk1.4.2_05/jre/javaws/javaws.packDon't worry about this. This is an artifact of the way Sun put the package together.
    They install the ".pack" files, and then a post-install rule runs that unpacks these files and deletes the original .pack files. Unfortunately, RPM doesn't handle such a situation very well.
    But this is definitely not an error.

  • Installing 9iAS Java Edition 9.0.3 on RedHat Linux 8.0, 7.2

    Hi,
    Iam trying to install oracle 9iAS Java Edition 9.0.3 on RedHat Linux 8.0 and 7.2. But i have common problems during installation.
    I get the following error while installing -
    Error in invoking target install of makefile
    /home/oracle/servers/9ias/sqlplus/lib/ins_sqlpluslib.mk
    Error in invoking target install of makefile
    /home/oracle/servers/9ias/network/lib/ins_oemagent.mk
    Similarly i get one more error. I dont remember the actual file name.
    Once i ignore all these errors then the OC4J instance configuration assistant and OPMN assistant do not start. They have some deployment problems during installation.
    After the installation is complete with certain problems, i try to start all the services of DCM, using dcmctl start command
    /home/oracle/servers/9ias/dcm>dcmctl start.
    The other services start except the HTTP server. I get the error ADMN-906025
    Iam not able to start the Oracle Enterprise Manager (OEM)
    also...
    Kindly give me the exact steps to overcome this problem or a link to some documentation...please
    Its very urgent...
    regards,
    Sachin Bafna

    Repost:

  • Slow updations (Oracle 11g 64 bit enterprise edition on Linux RHEL)

    I have created Following table for profiling updates per second in Oracle Database
    Test(RecordId number,Desciption varchar2(2000) //Btree Index on record id only
    Table has 10000 records only.
    I did updation for every record in loop by follwing query(Stored procedure executed on same server where database exists no network is coming in picture)
    update Test set description = description + 'something' where Recordid = i (loop counter)//existing description has 1000 characters
    I am wondering that updation of only 10000 records was taking 100 Seconds.
    I was expecting atlease 1000 records/second but it is 100 record/second
    Can anyone help to correct me and tell how can we improve database updations?
    Processor Dual proc dual core
    Raid with reading speed 2.5Gbps
    OS : Linux RHEL
    Database:Oracle enterprise edition 64 bit.
    sga_max_size = 1.5 GB
    Any help will be highly appreciated.

    You are running a loop but Oracle will give you read consistency.
    Oracle is probably cloning some of the datablocks as it re-reads them because
    it finds that the block has been previously updated.
    That sort of a loop is absolutely the wrong way to test Oracle.

  • I installed Oracle database 10g on SuSE Linux Enterprise Server 8 edition.

    I installed Oracle database 10g on SuSE Linux Enterprise Server 8 edition.
    But this massage pop up when I used my browser first time before start database.
    Actually when I clicks on yes to start database.
    The web browser you are using is not optimized for this release of Oracle enterprise manager. It is recommended that you use one of the following:
    * Microsoft Internet Explorer version 5.5, 6.0 or higher
    * Netscape Navigator version 7 and higher
    *Mozilla version 1.3.1 and higher
    Dose any one know hoe to upgrade mozilla or install internet explorer 5.5, 6.0 or higher or SLES 8.
    Regards,
    D

    You can download package for your distribution (for example) from http://www.mozilla.org or directly from SuSE ftp server ftp://ftp.suse.com/pub/suse/i386/9.1/suse/i586
    IE for linux does not exist.

Maybe you are looking for