Redirect attachment to other https port on same server
Hi
I want the EBP attachments to be redirected to the other port on the same server. Can you please provide some inputs on this?
Regards
Rajeev
Hi,
See these related threads;
redirect the shopping cart attachment from ebp doc server to file net serve
reroute the attachment from ebp doc server to ex file server (File net)
BR,
Disha.
Do reward points for useful answers.
Similar Messages
-
How to redirect the clients software updates to the same server but different IP?
Hello Everyone,
Well our Mac expert left the company and I got promoted to take his place. I only have about 7 months experience in the Mac world and I have about 90 Macs in the company. Anyways, our company moved into a new building and the Mac server was moved which I am sure the IP address changed. The server is up and running now, but the clients cannot see it and are not allowed update their software. I didn't change any paths or settings to the server, so I am guessing it has to do with something of some IP changes. The Network team set the static IP address up for it so I could connect to it with Remote Desktop just fine. Any suggestions to a Mac rookie?
ThanksIf your clients can't find the software update server (SUS), then either the server changed DNS names and thus your CatalogURL setting is wrong, or the server was moved to a new address and your DNS services were not updated (or the DNS updates haven't propagated through all the caches quite yet).
To see the current DNS setting for the server your.software.update.server.example.com (and replace that intentionally-bogus DNS name with the DNS name for your software updare server), launch Terminal.app (Applications > Utilities) and issue the command:
dig +short your.software.update.server.example.com
and see if you get the IP address that you expect, or the old IP address, or some other address.
Software Update CatalogURL
The usual way an OS X client configures the local (target) software update server is via a plist setting:
$ sudo defaults write /Library/Preferences/com.apple.SoftwareUpdate CatalogURL http://your.software.update.server.example.com:8088/index.sucatalog
To view the current CatalogURL setting from the plist:
$ sudo defaults read /Library/Preferences/com.apple.SoftwareUpdate CatalogURL
Details of the catalog URL setting needed varies by the version of the OS X Server; the above is for fairly recent servers. Google or Bing or DDG for the string:
/Library/Preferences/com.apple.SoftwareUpdate CatalogURL
for details on this, or check the Apple doc (see below) for details.
Background / Resources / More
Take the time to download and skim through the 10.6 Apple OS X Server 10.6 manuals (search for Mac OS X Server 10.6 to narrow what's posted); there's a lot of good information in those Apple documents, particularly given that the documentation for the more recent releases of OS X Server have gotten rather thinner. You'll find additional details of setting up software update services in those 10.6 documents; in the system imaging and software updates manual.
Also see the archives of the Mac Enterprise mailing list for related information and discussions, as well as details on tools such as Reposado. -
ACE L4 LB to two ports on same server?
How can I get the ACE to layer4 loadbalance to two services listening on different ports on the same real server?
You just need to define same real with different ports under the same serverfarm
rserver host Host1
ip address 10.10.10.1
inservice
serverfarm Sf1
rserver Host1 8080
inservice
rserver Host1 8081
inservive
Syed -
ABAP and Java HTTP Port same - PI 7.1 EHP1
Hi,
I have installed PI 7.1 EHP1 system.
I realize that both ABAP and Java HTTP Ports are same.
Is there any official note reg this or any info from SAP on the change.
icm/server_port_0 = PROT=HTTP,PORT=51500,TIMEOUT=60,PROCTIMEOUT=600
icm/HTTP/j2ee_0 = PREFIX=/,HOST=localhost,CONN=0-500,PORT=5$$00
Thanks,
TanujHi,
>>I realize that both ABAP and Java HTTP Ports are same.
the changed happened in 7.1 already as far as I remember
but I don't think it's documented anywhere except maybe the installation guide
Regards,
Michal Krawczyk -
Access orther http ports with safari on iPad
How can i access pages with other http ports. Ex sistemas2.macae.rj.gov.br:82
Thankssistemas2.macae.rj.gov.br:82
That should work. I confirmed it on my server using http on port 84.
Are you sure that the server is working and you have access? When I tried the example you gave, I get access denied. -
Can I install two versions of NW in the same server?
I have BW installed in a server running on Netweaver 7.3. but I need to install Netweaver 7.02 to do some tests, is it possible to install this other version in the same server? or will there be conflicts after the installation of the second version?
Thanks in advance,
Luis.HI,
sapinst detects existing instances, and makes sure that you dont use the same instance numbers => same tcp ip ports for diferent sap instances, wich would cause conflits.
so in the limit you can install any number os sap systems on the same host, given you have enought hardware resourses.
best regards,
Ricardo Caramona -
How many connectors can be hosted on same server
We're looking into developing a connector for our CRM product by CRC. Can it be hosted on the same server as our Mobility connector, or do we need to deploy a 2nd DS server?
Thanks,
BillI would not put any other connectors on the same server as the Mobility/GroupWise connector. The Mobility connector requires a lot of dedicated server resources and adding another connector could really interfere with it and reduce Mobilities effectiveness and reliability. It would be better to have a second server for your CRM connector and any other connector you may want to play with.
-
I am able to access some directories on the website without any problems while I get the "Firefox has detected that the server is redirecting the request for this address in a way that will never complete." error for other directories of the same site.
== URL of affected sites ==
http://www.safelistgrande.comSuddenly from yesterday I am getting this error while trying to opening gmail
-
Two http ports - one in 8080 and the other one in 3034 - How to remove 8080
Hi!
I have two http ports - one in 8080 and the other one in 3034 - How to remove 8080.
Listening Endpoints Summary...
(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=<ip address>)(PORT=<port number>)))
(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=<hotname>)(PORT=3034))(Presentation=HTTP)(Session=RAW))
(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=<hotname>)(PORT=2102))(Presentation=FTP)(Session=RAW))
(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=<hotname>)(PORT=8080))(Presentation=HTTP)(Session=RAW))
Services Summary...You get check which is the current dedicated HTTP port by using DBMS_XDB.getHTTPPort(). There can be only HTTP port active per database (not taken into account the HTTPs one). If two or more exists than there is still a process claiming that port (in this case 8080). It will be cleaned up after one or more processes are not claiming that port again. New connections will be redirected to the new port.
-
I just bought a new ipod touch and when i plug it into my Mac usb port nothing is happening I can get the computer to sync other ipod in the same port
Try:
iPhone, iPad, iPod touch: Device not recognized in iTunes for Mac OS X
Do not omit the Additional Information paragraph.
Is the iPod that connects an iPod touch? If not that does not mean anything since iOS devices like iPod touch, iPhone and iPad use different drivers than other iPods. -
ACE VIP OK HTTP, NOK other TCP port
Hi,
we are having issues in configuring load balancing for a TCP port. For HTTP it's working without issues and we have the ACE also balancing for other TCP ports.
Here goes the relevant config:
probe http PROBE-HTTP
interval 5
passdetect interval 2
passdetect count 1
request method get url /idc/
expect status 200 200
probe tcp PROBE-TCP
port 4444
interval 5
passdetect interval 10
rserver host PRD1
ip address 10.10.10.1
inservice
rserver host PRD2
ip address 10.10.10.2
inservice
serverfarm host SF-HTTP
probe PROBE-HTTP
rserver PRD1 80
inservice
rserver PRD2 80
inservice
serverfarm host SF-TCP
probe PROBE-TCP
rserver PRD1 4444
inservice
rserver PRD2 4444
inservice
sticky ip-netmask 255.255.255.255 address source SC-IP-PRD-HTTP
timeout 10
serverfarm SF-HTTP
class-map match-all NAT-VIP-HTTP
2 match virtual-address 10.10.35.1 any
class-map match-all NAT-VIP-TCP
2 match virtual-address 10.10.35.1 tcp eq 4444
policy-map type loadbalance first-match LB-VIP-HTTP
class class-default
sticky-serverfarm SC-IP-PRD-HTTP
insert-http x-forward header-value "%is"
policy-map type loadbalance first-match LB-NAT-VIP-TCP
class class-default
serverfarm SF-TCP
policy-map multi-match POLICY-RSERVER-VIP
class NAT-VIP-TCP
loadbalance vip inservice
loadbalance policy LB-NAT-VIP-TCP
loadbalance vip icmp-reply active
nat dynamic 1 vlan 200
class NAT-VIP-HTTP
loadbalance vip inservice
loadbalance policy LB-VIP-HTTP
loadbalance vip icmp-reply active
nat dynamic 1 vlan 200
interface vlan 200
description SERVER-SIDE
ip address 10.10.14.2 255.255.255.0
alias 10.10.14.1 255.255.255.0
peer ip address 10.10.14.3 255.255.255.0
access-group input EVERYONE
nat-pool 1 10.10.4.6 10.10.4.6 netmask 255.255.255.255 pat
service-policy input AllowICMP
service-policy input POLICY-RSERVER-VIP
no shutdown
The probe are OK, but nothing seems to get to the VIP:
ACE/CTX# show probe PROBE-TCP
probe : PROBE-TCP
type : TCP
state : ACTIVE
port : 4444 address : 0.0.0.0 addr type : -
interval : 5 pass intvl : 10 pass count : 3
fail count: 3 recv timeout: 10
--------------------- probe results --------------------
probe association probed-address probes failed passed health
------------------- ---------------+----------+----------+----------+-------
serverfarm : SF-TCP
real : PRD1[4444]
10.10.10.1 8853 1 8852 SUCCESS
real : PRD2[4444]
10.10.10.2 8853 1 8852 SUCCESS
ACE/CTX# show serverfarm SF-TCP detail
serverfarm : SF-TCP, type: HOST
total rservers : 2
active rservers: 2
description : -
state : ACTIVE
predictor : ROUNDROBIN
failaction : -
back-inservice : 0
partial-threshold : 0
num times failover : 0
num times back inservice : 1
total conn-dropcount : 0
Probe(s) :
PROBE-TCP, type = TCP
----------connections-----------
real weight state current total failures
---+---------------------+------+------------+----------+----------+---------
rserver: PRD1
10.10.10.1:4444 8 OPERATIONAL 0 0 0
max-conns : - , out-of-rotation count : -
min-conns : -
conn-rate-limit : - , out-of-rotation count : -
bandwidth-rate-limit : - , out-of-rotation count : -
retcode out-of-rotation count : -
load value : 0
rserver: PRD2
10.10.10.2:4444 8 OPERATIONAL 0 0 0
max-conns : - , out-of-rotation count : -
min-conns : -
conn-rate-limit : - , out-of-rotation count : -
bandwidth-rate-limit : - , out-of-rotation count : -
retcode out-of-rotation count : -
load value : 0
ACE/CTX# show service-policy POLICY-RSERVER-VIP
Status : ACTIVE
Interface: vlan 1 200
service-policy: POLICY-RSERVER-VIP
class: NAT-VIP-TCP
nat:
nat dynamic 1 vlan 200
curr conns : 0 , hit count : 0
dropped conns : 0
client pkt count : 0 , client byte count: 0
server pkt count : 0 , server byte count: 0
conn-rate-limit : 0 , drop-count : 0
bandwidth-rate-limit : 0 , drop-count : 0
loadbalance:
L7 loadbalance policy: LB-NAT-VIP-TCP
VIP ICMP Reply : ENABLED-WHEN-ACTIVE
VIP State: INSERVICE
curr conns : 0 , hit count : 0
dropped conns : 0
client pkt count : 0 , client byte count: 0
server pkt count : 0 , server byte count: 0
conn-rate-limit : 0 , drop-count : 0
bandwidth-rate-limit : 0 , drop-count : 0
compression:
bytes_in : 0
bytes_out : 0
I see a lot of this messages in the logging of the ACE:
show logging | i 4444
22:02:52 : %ACE-6-302023: Teardown TCP connection 0x18b6 for vlan200:10.10.14.2/26768 to vlan200:10.10.10.2/4444 duration 0:00:00 bytes 1051 TCP FINs
22:02:55 : %ACE-6-302022: Built TCP connection 0x14dc for vlan200:10.10.14.2/30318 (10.10.10.1/30318) to vlan200:10.10.10.1/4444 (10.10.14.2/4444)
22:02:55 : %ACE-6-302023: Teardown TCP connection 0x14dc for vlan200:10.10.14.2/30318 to vlan200:10.10.10.1/4444 duration 0:00:00 bytes 1103 TCP FINs
22:02:57 : %ACE-6-302022: Built TCP connection 0xc6c for vlan200:10.10.14.2/26784 (10.10.10.2/26784) to vlan200:10.10.10.2/4444 (10.10.14.2/4444)
22:02:57 : %ACE-6-302023: Teardown TCP connection 0xc6c for vlan200:10.10.14.2/26784 to vlan200:10.10.10.2/4444 duration 0:00:00 bytes 1103 TCP FINs
22:03:02 : %ACE-6-302022: Built TCP connection 0x151a for vlan200:10.10.14.2/26800 (10.10.10.2/26800) to vlan200:10.10.10.2/4444 (10.10.14.2/4444)
show logging | i 4444
22:02:52 : %ACE-6-302023: Teardown TCP connection 0x18b6 for vlan200:10.10.14.2/26768 to vlan200:10.10.10.2/4444 duration 0:00:00 bytes 1051 TCP FINs
22:02:55 : %ACE-6-302022: Built TCP connection 0x14dc for vlan200:10.10.14.2/30318 (10.10.10.1/30318) to vlan200:10.10.10.1/4444 (10.10.14.2/4444)
22:02:55 : %ACE-6-302023: Teardown TCP connection 0x14dc for vlan200:10.10.14.2/30318 to vlan200:10.10.10.1/4444 duration 0:00:00 bytes 1103 TCP FINs
22:02:57 : %ACE-6-302022: Built TCP connection 0xc6c for vlan200:10.10.14.2/26784 (10.10.10.2/26784) to vlan200:10.10.10.2/4444 (10.10.14.2/4444)
22:02:57 : %ACE-6-302023: Teardown TCP connection 0xc6c for vlan200:10.10.14.2/26784 to vlan200:10.10.10.2/4444 duration 0:00:00 bytes 1103 TCP FINs
22:03:02 : %ACE-6-302022: Built TCP connection 0x151a for vlan200:10.10.14.2/26800 (10.10.10.2/26800) to vlan200:10.10.10.2/4444 (10.10.14.2/4444)
The client request it's going trough an ASA, in the ASA side I see that the TCP connection it' half-open with SAaB flags. It seems that the VIP never replies with SYN+ACK to the ASA...
Thank you.
Best regardsHi Norberto,
The log messages you are getting are most probably the probe connections and not a failure, looking to them you will see your ACE is establishing TCP connection on 4444 then it will teardown the connection with FIN which is expected since you are using TCP keepalives.
I would recommend to go back and define the problem exactly, what are you exteriancing when you try to telnet on port 4444 toward the VIP from the client?
Run sniffing software on the client, the server and enable capture on ACE and ASA will give you exact idea what you are experiencing.
Note: The ASA and the ACE has great capture feature which will show you exactly the packet flows.
Note: Since you are applying NAT on the client requests, you should see the NATed IP address on the server capture.
Note: With L4 load balancing the ACE is not spoofing the clients' request, it just forward the SYN, SYN+ACK and ACK between the server and the client.
Let me know if you have any other questions.
Best regards,
Ahmad -
How to stop specific query attached with other query in same process using With method
Would it be possible to stop one query out of two queries attached to single process...because i see it is returning one IDisposable inteface...if i call dispose() method...two queries are stopped/killed...
So how to stop specific query which is combined with other queries in a same process at runtime i.e., attach or detach kind of thing?
Thanks in advance
SatishYes, the overloading of the term "Process" can be confusing. In SI, depending on your edition of StreamInsight, a process can run on one or more threads from a pool of threads and are scheduled together. Don't think of a process necessarily as a single
thread or multiple processes as a method of multi-threading.
As for a limit on the number of queries, there isn't a hard limit that I'm aware of. However, there will be a practical limit that will vary based on the complexity of the query, the event rate and your hardware (# of cores). If you are using Standard Edition,
this limit is much smaller as you only have a single scheduler thread. With Premium Edition, you have a scheduler thread for each core on the machine so you can get higher throughput and lower latency. But if you have, say, 4 cores on the machine (don't count
hyperthreaded cores, just real cores), 100 queries and a target throughput of 100K events/second, you'll likely have some problems. At 1K events/sec, you'd likely be fine though. With 32 cores and Premium Edition, you'd probably be OK with 100K events/sec.
So ... like I said, it depends.
DevBiker (aka J Sawyer)
Microsoft MVP - Sql Server (StreamInsight)
If I answered your question, please mark as answer.
If my post was helpful, please mark as helpful. -
Redirect AIR app http traffic to SOCKS server
Hi there,
I have an AIR app creating an SSH tunnel/SOCKS5 using a JAVA class via Native process, that so far works perfect but I need to redirect all the http requests from the AIR to the SOCKS server, can this be done via Socket/ServerSocket?? any exmaples?
Thanks
MArcosFirst things first - WS6.1sp4 is very old. You should upgrade to the latest SP. There are security problems that have been fixed in the years since SP4 was released.
<Client match="none" security="true">
NameTrans fn="redirect" from="/" url-prefix="https://www.example.com"
</Client>This would probably work. <Client security="false"> might work. I'm not positive if Security is holding a Boolean value and this is the right way to test for it, but some quick experimentation should be able to validate the solution.
Basically what you're trying to do is test for whether the request is secure or not and, if it is not, redirect the browser to the same URI but on a new protocol (https).
You could also have two obj.conf files. One could be attached to the Port 80 listen socket and do nothing but redirect anything that comes in to the Port 443 listen socket. -
Apache HA: Probe sends HTTP request to HTTPS port
Hello,
i have a Sun 3.2 Cluster and the Apache HA module configured as described in the documentation. Works fine, except of the probe sending a HTTP request to the HTTPS port - this causes every minute an error log entry which is annoying. The log file runs full of these "HTTP spoken on HTTPS port" messages.
I have already tried to set the Monitor_Uri_List parameter to http://servername:80/ but this does not help. Has anyone a solution to this problem? Can I just re-create the apache HA module and leave out the '44/tcp' in the Port_list parameter?
Thanks for help,
marc.It doesnt matter where they are, you just need to set up the two virtual hosts as per my example. The fact that the domains are the same with/without ssl doesnt change my example above.
So, you need to set up one ssl host for the domain sharpie.pen.com, and a non-ssl host for the domain sharpie.pen.com. If you want bic.pen.com to have the same behavior you will need another pair for that.
Apache must have a virtual host to respond to a port/domain combination.
The reason I suggested a re-write rule of the form I did was to ensure that if someone went to:
http://sharpie.pen.com/webmail/login.php (for instance)
they would be redirected to
httpS://sharpie.pen.com/webmail/login.php
rather than the root of the domain.
Does this help?
James -
i am deploying an oc4j application on release 2. but am not sure what is the oc4j http port from where i can access the web-site of the application deployed. also, what all configurations need to be done to make this work. in release 1, the server.xml, default-web-site.xml and data-sources.xml had to be edited. is it the same here or any other xml files need to be changed?
By default OC4J 9.0.2/9.0.3 is configured to listen for http requests at port 8888. Please look at http-web-site.xml.
regards
Debu
Maybe you are looking for
-
A column in a table has physical file path (I want to get file size of those docs from the OS)
Experts!! I have a table that holds the physical file path of files in one of its columns. It does not give a link, just the physical file path. For example,---- C:\bu\test.pdf and let us say the file size is kb according to the OS. Is there any wa
-
TS3888 I have an iMac and I am trying to connect to wsbs 2008. i am not having any luck any ideas?
I have an iMac and cannot access my office computer running Windows Small Business Server 2008 through Remote Desktop. Any ideas?
-
Can you block a specific person from imessage
I have someone blocked every way but iMessage. I don't want to turn it off, can they be blocked?
-
How long should it take? I have this problem.. I bought Zen Sleek last monday and now it jammed (showed boot-logo) and I pressed the magic button on the bottom. Then it wanted to re-build database, which seems to take forever. It has now been idling
-
Final Cut Pro 5.1.4 - HD 1920 issue
Hi, I am trying to bring in HD footage shot on a Nikon D5100 into FCP 5.1.4. The footage appears to be 1920 x 1080, 25fps, H.264, Square pixel. I can't seem to find a sequence preset that would match that? The nearest is 1440 x 1080, which doesn't lo