Redirect based on value of a selected option in select element

I want to redirect the user once they click on the submit form. New to CQ5 and Java so bear with me.
The form is built using the form components - formstart, formend and dropdown (name = countrydd)
So what resource does the click action on the submit use? And how do you read the selected value from the dropdown
L

Hi,
This is the forum to discuss questions and feedback for Microsoft Excel, this issue is related to macro via VBA, I recommend your question to the MSDN forum for Excel
http://social.msdn.microsoft.com/Forums/en-US/home?forum=exceldev&filter=alltypes&sort=lastpostdesc
The reason why we recommend posting appropriately is you will get the most qualified pool of respondents, and other partners who read the forums regularly can either share their knowledge or learn from your interaction with us. Thank you for your understanding.
George Zhao
Forum Support
Come back and mark the replies as answers if they help and unmark them if they provide no help.
If you have any feedback on our support, please click "[email protected]"

Similar Messages

Issue with Select options in select statement - ABAP Question

Hi
I am facing an issue with select options. Select statement is returning sy-subrc as 4.
I wrote the program as below:
SELECT-OPTIONS:
s_kunnr FOR bsad-kunnr,
s_lifnr FOR bsak-lifnr,
s_gjahr FOR bsad-gjahr,
s_bukrs FOR bsad-bukrs,
s_saknr FOR bsad-saknr,
s_budat FOR bsak-budat.
In start of selection I have written the select statement as
SELECT * FROM bsak INTO TABLE lt_bsak
WHERE bukrs IN s_bukrs AND lifnr = s_lifnr AND gjahr IN s_gjahr AND budat IN s_budat AND saknr IN s_saknr.
In selection screen I have not entered any values and executed the program. I am not getting any result. When I debug that, sy-subrc is 4 at above select statement. But table has records.
If am removing the "lifnr = s_lifnr " condition in select then select is returning values.
I am not getting where I made the mistake. Please suggest.
Thank you
Hanu

Hi,
The problem here with where condition select option lifnr = s_lifnr.
Use below select query.
SELECT * FROM bsak INTO TABLE lt_bsak
WHERE bukrs IN s_bukrs
    AND lifnr     IN s_lifnr
    AND gjahr   IN s_gjahr
    AND budat IN s_budat
    AND saknr IN s_saknr.
s_lifnr is a select option and you are passing it as parameter lifnr = s_lifnr.
if you want to pass this s_lifnr as single vale then pass in below mentioned way.
lifnr = s_lifnr-low
BR,
Vijay

Problem with table-indexes when using select-options in select

Hello experts,
is it right that table-indexes will not be used if you take select-options to select data from the database?
in detail:
i have build up an table-index for one of our db-tables and test it via an test-programm. The first test with '=' comparisons worked fine. Every key of the index was used; checked via ST05!
e.g.:    SELECT * FROM TABLEA INTO ITAB WHERE keya = '1' AND keyb = '2' AND keyc = '3'.
Now i startet the test with select-options
e.g.:   SELECT * FROM TABLEA INTO ITAB WHERE keya IN seltabA AND keyb IN seltabB AND keyc IN seltabC.
First of all i just filled the seltabs with only 1 value:    eg: seltabA=      SIGN = 'I'   OPTION = 'EQ'   LOW = '1'     etc.
Everything worked fine. Every key of the index was used.
But now, I putted more than one entries in the seltabs e.g.
seltabA:      SIGN = 'I'   OPTION = 'EQ'   LOW = '1'
                   SIGN = 'I'   OPTION = 'EQ'   LOW = '2'
                   SIGN = 'I'   OPTION = 'EQ'   LOW = '3'
From now on, the indexed was not used completely (with all keys).
Isn't that strange? How can i use select-options or sel-ranges with using the complete table-indexes?
Thanks a lot,
Marcel

Hi Hermann,
i hope this helps:
this is the first one, which uses the complete index:
SELECT
"KOWID" , "LIFNR" , "KLPOS" , "ORGID" , "KOART" , "MATNR" , "GLTVON" ,
"GLTBIS" , "WERT" , "ABLIF" , "FAKIV" , "AENAM" , "AEDAT" , "AFORM" ,
"HERSTELLER" , "ARTGRP" , "OE_FREITXT" , "ARTFREITEXT" , "STATUS" ,
"TERDAT"
FROM
"/dbcon/01_con"
WHERE
"MANDT" = ? AND "LIFNR" = ? AND "ORGID" = ? AND "KOART_BASIS" = ? AND
"STATUS" = ? AND "GEWAEHR_KOWID" < ? AND ( "STATUS" = ? OR "STATUS" = ? OR
"STATUS" = ? ) WITH UR
RESULT: 5 IXSCAN /dbcon/01_con05 #key columns: 4
And the second one, which does not use the complete index! The 3 ranges are filled each with 2 values. Remember; when i fill them each with only one value, the result is the same as you can see above(/dbcon/01_con05 #key columns: 4):
SELECT
"KOWID" , "LIFNR" , "KLPOS" , "ORGID" , "KOART" , "MATNR" , "GLTVON" ,
"GLTBIS" , "WERT" , "ABLIF" , "FAKIV" , "AENAM" , "AEDAT" , "AFORM" ,
"HERSTELLER" , "ARTGRP" , "OE_FREITXT" , "ARTFREITEXT" , "STATUS" ,
"TERDAT"
FROM
"/dbcon/01_con"
WHERE
"MANDT" = ? AND "LIFNR" IN ( ? , ? ) AND "ORGID" IN ( ? , ? ) AND
"KOART_BASIS" IN ( ? , ? ) AND "GEWAEHR_KOWID" < ? AND ( "STATUS" = ? OR
"STATUS" = ? OR "STATUS" = ? ) WITH UR
and here the access-plan
   0 SELECT STATEMENT ( Estimated Costs = 5,139E+01 [timerons] )
5     1 RETURN
5     2 NLJOIN
5     3 [O] TBSCAN
5     4 SORT
5 TBSCAN GENROW
5     6 <i> FETCH /dbcon/01_con
7 IXSCAN /dbcon/01_con05 #key columns: 2
As you can see, only 2 keys were taken for indexed selection!
Any idea?
Kind regards,
MArcel
Edited by: Marcel Ebert on Jul 28, 2009 5:25 PM

Length of select-options in selection screen.

Hi,
I was able to give the lemgth of select-options only upto 8 characters.
Select-options :S_Mtrial for mara-matnr.
But my requirement is I want total name which is more than 8 characters.
Select-options:Material_numberl for mara-matnr.
Can any one help how to do.
Thanks in advance.

The Statement...
Select-options :S_Mtrial for mara-matnr
The selection screen length depends on the type that you are assigning to it. Since the length of type
mara-matnr is less, the selection option S_Mtrial will be displayed with short length in the selection screen.
The alternate to do this is...
selection-screen begin of line.
selection-screen comment 2(10) text-001.
select-options : <ur select option name>
selection-screen end of line.
Text element,text-001 contains the select option text to be displayed in the screen
Hope it helps.

Side by side select options in selection screen

Hai Gurus,
In a report, I need to place Period From and Period To date select-options in selection screen.
In one line (i.e side by side).
Appreciate your immediate response.
Thanks and Regards,
Kiran.

Thanks to all,
I got it.
my code here.
SELECTION-SCREEN: BEGIN OF BLOCK sel1 WITH FRAME TITLE text-sel.
PARAMETERS: SUMMARY AS CHECKBOX USER-COMMAND SUMMARY.
SELECTION-SCREEN BEGIN OF LINE.
SELECTION-SCREEN COMMENT 1(13) text-pfr.
SELECT-OPTIONS: VALID_FR FOR ZZUTIL_RATE-VALID_FR MODIF ID RAM no intervals NO-EXTENSION. "changed
SELECTION-SCREEN COMMENT 30(13) text-pto.
SELECT-OPTIONS: VALID_TO FOR ZZUTIL_RATE-VALID_TO no intervals NO-EXTENSION. "changed
SELECTION-SCREEN END OF LINE.
SELECTION-SCREEN: END OF BLOCK SEL1.

PS:Copy of MBBS report with Date(GR) selection option in selection screen.

Hi,
We are developing a report, which is Copy of MBBS report, addition as Date(GR) selection option in selection screen to view historical data {i.e.Project Stock(Q) on back dates}.
MBBS is showing Project Stock w.r.t. WBS. So pls suggest Table, which can fulfill the requirement to show the Project Stock from GR w.r.t. Purchase and Production order in back date w.r.t. that WBS.
Pls do the needful.
Thanks,
Amit Jain.

Hi Amit ,
The Project Stock Table is MSPR , and the Project stock history table is MSPRH .
Though not through with your actual requirement , There is a standard Report MB5B -- Stock on Posting Date . In the selection screen , we can have the Special Stock Q (Project Stock ) .
If you can develop copying this report instead of MBBS , it would take care of receipts as well as issues ,and from the material Document you can build a relation to the account assignment WBS/Network Activity through MSEG Table .
Hope it helps .
thanks and regards
Kish

Select-options in Selection Screen to show more rows for entering values

Hi all,
In my webdynpro abap I have added the SELECT-OPTIONS componenet and working fine.
User need in the Selection Screen for select options more rows to show entering values in single time.
THe Default Rows show only 5 .
user need to change to 10 or 15 Rows to show.
Pl help .
THanks in advance.
Dev

Hi,
Here is the way which I just tested and found working.
This is the main code which needs to be written.
TYPES:
    ty_r_vbeln TYPE RANGE OF vbeln,
    ty_s_vbeln TYPE LINE OF ty_r_vbeln.
data ls_vbeln type ty_s_vbeln.
field-symbols <fs_range> TYPE INDEX TABLE.
ASSIGN lt_range->* TO <fs_range>.
do 10 times.
APPEND ls_vbeln TO <fs_range>.
enddo.
For further refinement, you can create a input field in view for number of lines to be shown as enabled.
The complete code is as below.
DATA lo_cmp_usage TYPE REF TO if_wd_component_usage.
lo_cmp_usage =   wd_this->wd_cpuse_select_options( ).
IF lo_cmp_usage->has_active_component( ) IS INITIAL.
lo_cmp_usage->create_component( ).
ENDIF.
DATA lo_interfacecontroller TYPE REF TO iwci_wdr_select_options .
lo_interfacecontroller =   wd_this->wd_cpifc_select_options( ).
DATA lo_r_helper_class TYPE REF TO if_wd_select_options.
lo_r_helper_class = lo_interfacecontroller->init_selection_screen( ).
Creating range table
DATA lt_range TYPE REF TO data.
CALL METHOD lo_r_helper_class->create_range_table
    EXPORTING
      i_typename     = 'VBELN'
    RECEIVING
      rt_range_table = lt_range.
Disabling the global options
CALL METHOD lo_r_helper_class->set_global_options
EXPORTING
      i_display_btn_cancel = abap_false
      i_display_btn_check   = abap_false
      i_display_btn_reset   = abap_false
      i_display_btn_execute = abap_true.
       TYPES:
    ty_r_vbeln TYPE RANGE OF vbeln,
    ty_s_vbeln TYPE LINE OF ty_r_vbeln.
data ls_vbeln type ty_s_vbeln.
field-symbols <fs_range> TYPE INDEX TABLE.
ASSIGN lt_range->* TO <fs_range>.
do 10 times.
APPEND ls_vbeln TO <fs_range>.
enddo.
Adding the selection field
CALL METHOD lo_r_helper_class->add_selection_field
    EXPORTING
      i_id                         = 'VBELN'
      I_OBLIGATORY                 = ABAP_TRUE
      I_NO_EXTENSION               = abap_false
      i_value_help_type = if_wd_value_help_handler=>CO_PREFIX_SEARCHHELP
      it_result                    = lt_range.
Edited by: Jayanthi Jayaraman on Dec 2, 2010 8:29 AM

Latest Value - Select Option - At Selection Value help

Hi,
I need the current values entered in the Select Option of the Selection Screen while generating the Value Help.
There are two selection option fields in the Selection Screen, Selopt1 and Selopt2, to generate the Value help of Selopt2 i need the latest values of the Selopt1, the function module dynp_read_values does not return all the values of the selectop option Selopt1 it returns only the first row of selopt1-high and selopt1-low, the function module RS_REFRESH_FROM_SELECTOPTIONS does not return the current values entered in the selection screen, is there any way to retrive the latest values of the select option in the event At Selection Screen on Value Request.
regards
Santosh

Hi Santosh,
When you go for f4 help on selopt2, you can use following code to get the current value of selopt1,
AT SELECTION-SCREEN ON VALUE-REQUEST
FOR selopt2-high.
select * from bkpf into table it_bkpf where
BKTXT in selopt1[].
CALL FUNCTION 'F4IF_INT_TABLE_VALUE_REQUEST'
    EXPORTING
      retfield    = 'BKTXT'
      dynpprog    = sy-repid
      dynpnr      = sy-dynnr
      dynprofield = 'Invoice Id'
      value_org   = 'S'
    TABLES
      value_tab   = it_bkpf .
IF sy-subrc <> 0.
    " do nothing.
ENDIF.
In selection screen, you can directly fetch the value of selection options or parameters by selopt1 or selopt2 (in your case by using AT Selection Screen for value request).
Reply for further doubts,
Please reward if useful.
Thanks and regards,
Ashlesha Desai
Edited by: ashlesha desai on May 26, 2008 6:06 AM

Reading the select options of selection screen

Hi All,
I have a problem in reading the select options from the selection screen.
I have two select-options on the selection screen. Based on the first select-option value, I need to get the F4 values for the second select-option.
I am using the function module 'RS_REFRESH_FROM_SELECTOPTIONS' for getting the select-options values. But here there is small problem.
This FM is returing the values if i select the multiple values. But if I give a single value in the select-options i.e., If i give only the low value, I am getting the blank entries from the function module.
How can I get the value of the select-option if i give only the low field.
Please help me in this regard.
Regards,
Kishore.

Hi,
Try to use FM "DYNP_VALUES_READ"
CALL FUNCTION 'DYNP_VALUES_READ'
    EXPORTING
      dyname               = sy-cprog
      dynumb               = sy-dynnr
    TABLES
      dynpfields           = i_dynpfields
    EXCEPTIONS
      invalid_abapworkarea = 1
      invalid_dynprofield = 2
      invalid_dynproname   = 3
      invalid_dynpronummer = 4
      invalid_request      = 5
      no_fielddescription = 6
      invalid_parameter    = 7
      undefind_error       = 8
      double_conversion    = 9
      stepl_not_found      = 10
      OTHERS               = 11.
and after this you can read the internal table i_dynpfields.

Select-options in SELECT query - syntax error

Hi all,
I get the error below when I try to use the select options in a SELECT query . Please help me.
"The IN operator with "SO_AWART" is followed neither by an internal
table nor by a value list."
The code i have used(Logical database PNP is used):
TABLES: pernr,
        catsdb.
INCLUDE ztime_cwtr_top.    " global Data
INCLUDE ztime_cwtr_f01.
SELECTION-SCREEN BEGIN OF BLOCK B1 WITH FRAME.
SELECT-OPTIONS SO_AWART FOR CATSDB-AWART.
PARAMETERS P_THRES TYPE I.
SELECTION-SCREEN END OF BLOCK B1.
Get data from CATSDB table. Workdates within the date interval are considered.
SELECT pernr workdate awart catsquantity beguz enduz status
FROM catsdb
INTO TABLE it_catsdb
WHERE pernr = pernr-pernr    AND
       workdate GE pn-begda     AND
       workdate LE pn-endda     AND
       status   IN ('20', '30') AND
       awart    IN so_awart .
      awart    IN ('1100', '1137', '1138', '1139', '1140',
                  '1147', '1148', '1149', '1157', '2003' ).
when I give the values directly i do not get any syntax error, but when I use select options in the where condition I get the syntax error.
I have tried different options like using only the select-options in the where condition.
Thanks in advance.....
Madhu

Solved.
Code with syntax error:
include z...top .
include z...fo1.
select-options: xxxxxxx
Code with no syntax error:
select-options: xxxxxxx
include z...top .
include z...fo1.
Thanks for all your help,
Madhu

Select Option's Context Element for the REPORT_ATTRIBUTE_ERROR_MESSAGE

Hi,
We're on 7.0 ehp1.
I found a thread on same subject u201Cwdr:select_options and highlight Error Message with a Link to Inputfield u201C, Jul-23-2008, in which Thomas Jung gave an explanation of how to get the context element of the Select Options on a view.
I tried to follow it, but Iu2019m still not getting it. Please show how to get the context element of a Select Option for the u201CREPORT_ATTRIBUTE_ERROR_MESSAGEu201D .
   wd_comp_controller->go_message_manager->report_attribute_error_message(
         exporting
          message_text   = ls_messaga_text
              element        = ?????
           attribute_name = ls_option_id
Thomas' explanation:
I gave you the code that gets you to the interface controller. From there you call the GET_API to get the component controller. After you have the component controller it is normal context coding to read the context of the Select-Options context. Run the debugger and use the Web Dynpro view to see what your context looks like at runtime. When I test this with one of my applications, the names of the context nodes that were dynamically generated was really straight forward - as it uses the names of the select-option itself. Nothing special once you reach this point - just normal context coding...."
Kind regards,
Huntr

Hi ,
Use the below approach to achieve this,
data:
    lr_context_node       type ref to if_wd_context_node,
    lr_element            type ref to if_wd_context_element,
    message_text          type string.
get the node and leadSelection of that field
    lr_context_node = get_node_of_sel_field( <field>-m_id ).
    lr_element = lr_context_node->get_lead_selection( ).
case <field>-m_type.
For Select option field
            when if_wd_select_options=>mc_sscreen_item_type_field.
              m_message_manager->report_attribute_error_message(
                element        = lr_element
                attribute_name = 'LOW'
                message_text   = message_text ).
"For Parameter field
            when if_wd_select_options=>mc_sscreen_item_type_parameter.
              m_message_manager->report_attribute_error_message(
                element        = lr_element
                attribute_name = 'VALUE'
                message_text   = message_text ).
            when others.
          endcase.

SELECT-OPTIONS Multiple selection

Hello
I have the following line of code:
SELECT-OPTIONS: p_matnr FOR mara-matnr.
The users would like to use the multiple selection button to paste/upload from the clip board but unable until at least one entry is entered before the multiple selection will work. Is there a way for the multiple selection to work without entering a material?
THANKS

Hi Gary, Clicking the button shown below bring up the multiple selection screen without requiring a value. Do not add the obligatory keyword on the select-options statement as pointed out by Ramon.
see below:

How to restrict more than one 1 range in select option on selection screen.

Hi all,
I have a requirement where I need to restrict user from giving more than 1 range for a date selct option ..other all features of multiple selection will be as usual...
for eg we can do this if we disable / hide other cells if the user clicks on multiple ranges tab.. If only 1 cell is available to give the range user will not be able to give more than 1 range....
I was thinking if I could use select_options_restrict but how do i fill its parameters...
Can anyone send me the sample code or the same to achieve this functionality...I have used select_options_restrict to hide multiple ranges itself ... But here user will be able to give range but only 1....
Thanks and Regards
Sweta

HI,
Please try the below logic.
SELECT-OPTIONS: so_addr   FOR    ADR6-SMTP_ADDR NO INTERVALS.
***********remove_range_for_select_option******************* .
DATA: ls_restrict TYPE SSCR_RESTRICT,    "The type for SELECT_OPTIONS_RESTRICT
        ls_opt_list TYPE SSCR_OPT_LIST,    "One list of options
        ls_asn       TYPE SSCR_***.         "One line of table associating selection screen
                                                                  "object with opt. list
CLEAR: ls_restrict,
         ls_opt_list,
         ls_asn.
*Only EQ valid, discrete values, Include & Exclude
ls_opt_list-name       = 'EQ'.
ls_opt_list-options-eq = 'X'.
APPEND ls_opt_list TO ls_RESTRICT-OPT_LIST_TAB.
LS_ASN-KIND            = 'S'.
LS_ASN-NAME            = 'SO_ADDR'.            "Select Option
LS_ASN-SG_MAIN         = 'I'.
LS_ASN-SG_ADDY         = '*'.
LS_ASN-OP_MAIN         = 'EQ'.
LS_ASN-OP_ADDY         = ' '.
APPEND LS_ASN TO LS_RESTRICT-***_TAB.
*Make use of SELECT-OPTIONS easier on the selection screen
CALL FUNCTION 'SELECT_OPTIONS_RESTRICT'
    EXPORTING
      RESTRICTION            = LS_RESTRICT
    EXCEPTIONS
      TOO_LATE               = 1
      REPEATED               = 2
      SELOPT_WITHOUT_OPTIONS = 3
      SELOPT_WITHOUT_SIGNS   = 4
      INVALID_SIGN           = 5
      EMPTY_OPTION_LIST      = 6
      INVALID_KIND           = 7
      REPEATED_KIND_A        = 8
      OTHERS                 = 9.
IF SY-SUBRC <> 0.
    MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
            WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
Edited by: Rajasekhar Reddy P on Mar 16, 2009 2:03 PM

Select option in select list and navigate to different page

Hello,
I have a tabular form.One of the item is a select list with 2 options. Selecting option one should take the user to page10(just an example) and display all the values of that particular row. Similarly selecting option 2 should take the user to page 20 and display all the values of that row.
Can some one guide me how to do above mentioned job.
Thanks in advance.
Pravish

@Avinash
if f_cat-seltext_m = 'Select'.
    f_cat-col_pos = 1.
    f_cat-seltext_l = 'EDIT'.
    f_cat-Checkbox = 'X'.
    f_cat-EDIT = 'X'.
endif.
I am already passing f_cat-checkbox = 'X'.
Thanks
Kumar.

Validation of SELECT-OPTIONS in selection screen

Hi Experts,
I need to validate the user entered values in the selection screen, specifically in SELECT-OPTIONS. So, currently am doing by checking S_VBELN-LOW and S_VBELN-HIGH.
BUt, curious that Is there any standard SAP Function module to use for this purpose? I searched in SE37 by giving OPTIONS but did not find any!!
Thank you

Hi,
Instead of searching for the function module .. use the event at selection-screen on or at selection-screen and write your validation logic only if there no value table for the particular field..
Thanks
Krishna

Check select-options in selection-screen

I have two select-options in a selection-screen s_vbeln and p_ebeln with intervals & with extensions. Now i have to check whether values in high or in low are valid or not? I have written the following code to check the validity of the values.
AT SELECTION-SCREEN ON s_vbeln.
IF SY-UCOMM EQ 'ONLI' .
    IF NOT s_vbeln[] IS INITIAL.
      LOOP AT s_vbeln.
        SELECT SINGLE VBELN
                    FROM VBAK
                    INTO gs_vbeln
                   WHERE VBELN EQ s_vbeln-LOW.
        IF SY-SUBRC <> 0.
          MESSAGE E398(00) WITH 'Invalid Sales Order Number!!'.
        ENDIF.
        SELECT SINGLE VBELN
                     FROM VBAK
                    INTO gs_vbeln
                   WHERE VBELN EQ s_vbeln-HIGH.
        IF SY-SUBRC <> 0.
          MESSAGE E398(00) WITH 'Invalid Sales Order Number!!'.
        ENDIF.
      ENDLOOP.
    ENDIF.
ENDIF.
The similar is with p_ebeln which is a field of ekko table.And vbeln is a field of vbak table. if gurus can post the code
for the same.
Regards,
Priya

Hi Shweta,
select-options are represented as internal tables in the system. If the user extends the select-option and enters a couple of values, they should be checked all. So the code should be a little bit enhanced.
To have the cursor positioned a the field with the error, you may use event
AT SELECTION-SCREEN ON s_vbeln.
PERFORM check_s_vbeln.
*&      Form CHECK_S_VBELN
FORM check_s_vbeln .
LOOP AT s_vbeln.
    IF s_vbeln-low IS NOT INITIAL.
      SELECT count(*) FROM vbak WHERE vbeln = s_vbeln-low.
        IF sy-subrc <> 0.
          MESSAGE e001(vb) WITH s_vbeln-low.
*   Sales document & does not exist
        ENDIF.
      ENDIF.
      IF s_vbeln-high IS NOT INITIAL.
        SELECT count(*) FROM vbak WHERE vbeln = s_vbeln-high.
          IF sy-subrc <> 0.
            MESSAGE e001(vb) WITH s_vbeln-high.
*   Sales document & does not exist
          ENDIF.
        ENDIF.
      ENDLOOP.
    ENDFORM.                    " CHECK_S_VBELN
Kind regards,
Clemens

Redirect based on value of a selected option in select element

Similar Messages

Maybe you are looking for