Redirect emails in OWA and Outlook 2010 not working in Exchange 2013
I have an new install of Exchange 2013 with all updates.
When I setup an inbox rule to redirect messages to another contact it is not working.
When I used Outlook 2010 and ran the rule manually I received this error:
"the redirect action is not currently supported with run rules now"
It seems that I didn't setup up something correctly in Exchange 2013 or a feature is not turned on. Please assist.
In the EM console when I setup forwarding that is working. Its the inbox rule redirect not working.
Hi,
From your description, I recommend you use the following cmdlet to ensure that the DeliverToMailboxAndForward parameter is set to $True.
Get-Mailbox <identity> | fl DeliverToMailboxandForward
If this parameter is false, you can use the Set-Mailbox cmdlet to set it and check the result.
Hope this can be helpful to you.
Best regards,
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact [email protected]
Amy Wang
TechNet Community Support
Similar Messages
-
Outlook 2010 behaves strange with exchange 2013
Hello,
I imported a san certificate with a domain name for local use. This is exchange.xxxx.xx . This is also a A-record pointing to the same ip of the actual server.
The name of the exchange server itself is mail01.xxxx.xx .
My laptop is not a part of the domain. When i want to add my mailbox i use exchange.xxxx.xx for the server. My username can't be resolved. When i use the name of the server mail01.xxxx.xx then it works.
I tested this with outlook 2013 and exchange.xxxx.xx could resolve my mailbox.
So for outlook 2010 i need to use the name of the server where exchange 2013 is installed.
For outlook 2013 i can use the alias exchange.xxxx.xx.
Anyone has any idea ? It's not blocking. We haven't started the migration yet :pHi,
Based on my knowledge, in Exchange 2013 environment, the server name option is filled with the new type"mailbox GUID+@+ the domain portion of the user's primary SMTP address" when we configure the Exchange account in Outlook client.
In your case, I recommned you add the following record in the host file of the computer which installs the Outlook 2010: the host name Exchange.domain.com points to your server IP address .
Thanks,
If you have feedback for TechNet Subscriber Support, contact
[email protected]
Angela Shi
TechNet Community Support
Thx for your feedback. I will check this out. -
Crystal report 8.5 export to csv and rtf format not working with office 2013
Hi Experts,
Crystal report version 8.5 hangs and eventually crash when i export my report to csv or rtf format on windows 7 with office 2013 installed, code is written in VB 6 although the same scenario is working with office 2010 installed.
i debugged the code and found the application hangs at function Report.Export(False).
below is the code snippet
.PDFExportAllPages = True 'ePDFExportAllPages
.PDFFirstPageNumber = ePDFFirstPageNumber
.PDFLastPageNumber = ePDFLastPageNumber
.RTFExportAllPages = True 'eRTFExportAllPages
.RTFFirstPageNumber = eRTFFirstPageNumber
.RTFLastPageNumber = eRTFLastPageNumber
.UseReportDateFormat = eUseReportDateFormat
.UseReportNumberFormat = eUseReportNumberFormat
.UseReportNumberFormat = eUseReportNumberFormat
.XMLAllowMultipleFiles = eXMLAllowMultipleFiles
.XMLFileName = eXMLFileName
Report.Export (False) ----Application hangs here and eventually crash
Looking forward for your help, as it is very urgent
Regards
MohitHi Mohit
CR 8.5, being about 15 years old, does not support Windows 7. I am surprised this works for you with MS Office 2010 and to be honest, I'd consider my self lucky there. The fact that is does not work with office 2013... well, like I said, lucky with Office 2010 and your luck ran out with Office 2013.
Your option; rewrite the app in VS 2010 / 2012 / 2013 and use the CR Assemblies for VS .NET from SAP Crystal Reports, Developer Version for Visual Studio .NET. The CR Java SDK would be another option.
- Ludek
Senior Support Engineer AGS Product Support, Global Support Center Canada
Follow us on Twitter -
Microsoft outlook 2010 not working after installing proxy server and ForeFront TMG firewall
I am trying to have Outlook 2010 work though proxy server recently installed on internal network, I have configured IE to use the proxy settings, but I cannot find the
same with Outlook 2010, I want to clarify that we use Outlook 2010 to connect to internet email and we installed ForeFront TMG firewall on the proxy server and as a result of that we changed the IP settings and after that Outlook stopped sending and receiving
mails and gives error: “receiving reported error (0x800408fc): 'The Server name you entered cannot be found (it might be down temporarily).”
So please help us by sharing how to fix this issue to make Outlook work though proxy server
ThanksHi,
Are you using Exchange account? If you are changing your Exchange account to use a proxy server, I suggest we can create new profile and automatically re-configuring your account with autodiscover service to have a try:
http://support.microsoft.com/kb/829918
If the account can’t be configured automatically, please manually configure the account and change the settings for procy server:
1. In the Account Settings dialog box, click the
Email tab, click to select the Exchange account, and then click
Change.
2. Click More Settings. On the Connections tab, click
Exchange Proxy Settings.
3. In Connection settings, type the proxy server FQDN under Use this URL to connect to my proxy server for Exchange, click OK to have a try, and then click
OK to save all settings.
4. Restart Outlook.
Regards,
Winnie Liang
TechNet Community Support -
IPhone4 Sync to Outlook 2010 not working
Anyone else having problems sync'ing the iPhone4 to Outlook 2010 Contacts? Worked fine with the 3GS, somehow it refuses to work with the iPhone4, none transfered.
Tried http://support.apple.com/kb/ht1692 to no avail.
Getting desperate now. I have zilch in my Address book, and would rather not export Outlook contacts into Apple Address Book to sync etc...So, it took me a couple of days of not thinking about the problem for the lightbulb to finally go on!! The issue is not a bug at all.
My Outlook 2010 PC client is configured for "Cached mode", and all Contact information was actually on the Exchange server rather than on my local machine. Plus my iPhone4 Exchange email setting had "Contacts" sync set to Off.
In other words, the iPhone was sync'ing to non-existant local Contact database, and it was not sync'ing to the Exchange server Contact information over the air either.
So, I just turned on Contact sync'ing in the iPhone4's Exchange email setting... Tada! Contacts re-appeared, like magic!
Apologies for the false alarm, hope no one else goes through the same mistake. -
Outlook 2010 not working with I cloud control panel.
Using:
Windows 7 PC
Outlook 2010
Problem free use untill now.
As of a 4 days ago my icloud control panel stopped syncing with my tasks, contacts and calenders to my Icloud account I am using as metioned outlook 2010 , I dont even see the I cloud sycn/refresh button located in the tool bar in outlook 2010. I have been using this plug in for nearly a year with out any problems untill now.
My Email works just fine.
I have tried signing in and out of I cloud, uninstalling the icloud conroll panel, using the repair function, uninstalling the Out 2010 non of which have helped.
ha anyone else had this problem or have an idea on how to resolve it?
ThanksWhy are you running Pocket Mirror, do you have a Palm device?
Uninstall Pocket Mirror, delete the 2 Pocket Mirror calendars, ignore 'My Calendar' the iCloud calendar is the one to use.
If you do not uninstall Pocket Mirror the calendars will keep recreating themselves -
Outlook does not connect to Exchange 2013 after name change due to marriage
When launching Outlook and clicking through the setup wizard to create a new profile, Outlook auto-discovers the correct email alias. When establishing a connection it successfully checks network connectivity and successfully searches the email settings.
When it attempts to logon to the mail server the error comes up.
"The connection to Microsoft Exchange is unavailable. Outlook must be online or connected to complete this action."
Clicking "Check Name" gives the error:
"The name cannot be resolved. The connection to Microsoft Exchange is unavailable. Outlook must be online or connected to complete this action."
The same result occurs with a manual setup.
We are running Exchange Server 2013. User workstations are running Outlook 2013 on Windows 7 Pro. All updates have been applied as of March 31, 2015.
All name changes have been made in AD and Exchange. Old aliases and new aliases are set in Exchange. Offline Address books are updated daily. The local profile and registry settings have been updated on the workstation and the user is successfully logging
into the profile. The issue is only with Outlook 2013. User can access mail through OWA and ActiveSync on their mobile device.
Logging the user into another workstation and running the wizard returns the same results, which rules out the possible problem being with the workstation.Hi,
According to your description, I understand that failed auto-configure Outlook with error “The name cannot be resolved. The connection to Microsoft Exchange is unavailable…”, however OWA works fine.
If I misunderstand your concern, please do not hesitate to let me know.
Are all account or any special user experience this question?
If OWA works fine, it indicate that the mailbox database is mounted, and mailbox works well.
I notice that you have changed the account name before issue arise, because external access, the client locates the Autodiscover service on the Internet by using the primary SMTP domain address from the user's email address.
More details about Autodiscover service, for your reference:
https://technet.microsoft.com/en-us/library/bb124251.aspx?f=255&MSPPError=-2147217396
Please try below command to force update address list, GAL, OAB, then test again:
Get-AddressList | update-AddressList
Get-GlobalAddressList | update-GlobalAdressList
Get-OfflineAddressBook | Update-OfflineAddressBook
If the issue persists, please wait for some time to complete configuration.
Thanks
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact [email protected]
Allen Wang
TechNet Community Support -
Throttling policy not working on Exchange 2013 CU6
Hi,
We have a test throttling policy to restrict a mailbox to send at most 2 messages
per minute in our live Exchange 2013 CU6 enviroment. It was associated to a test mailbox. We have separated installed 2 mailboxe and 2 cas server roles in our enviroment. I have checked latest CU-s (7 & 8) but these are
not fixing any related bugs.
We tried lots of workaround (see below list) and solutions to fix this but it is still not working with outlook MAPI and OWA client.
Throttling policy not working
smtp service restart
RPC Client Acces service restart
The policy details:
Get-ThrottlingPolicy low_rate_limit |fl *limit*
MessageRateLimit : 2
RecipientRateLimit : 1000
Get-mailbox [email protected] | fl ThrottlingPolicy
ThrottlingPolicy : low_rate_limit
Do you have any idea what is the problem?
Thank you in advance.
br,
ZoltanHi Zoltan,
Base on my research, you need to configure the MessageRateLimit parameter on receive connector also.
The MessageRateLimit parameter specifies the maximum number of messages that can be sent by a single client IP address per minute. The default value for a Receive connector configured in the Transport service on a Mailbox server is
unlimited. The default value for a Receive connector configured on an Edge server is 600 messages per minute. The valid input range for this parameter is 1 to 2147483647. To remove the message rate limit on a Receive connector, enter a value of
unlimited.
https://technet.microsoft.com/en-us/library/bb125140(v=exchg.150).aspx
Best regards,
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact [email protected]
Niko Cheng
TechNet Community Support -
RBL not working on Exchange 2013 Edge Transport
Single multi-role server with a couple of mailboxes, recently added an Edge Transport server. After configuring the Edge Subscribtion I added sen.spamhaus.org as a RBL Provider:
Add-IPBlockListProvider -Name Spamhaus -LookupDomain zen.spamhaus.org
This is not working. A lot of spam is still entering Exchange and the http://www.crynwr.com/spam/ test failed.
Both servers run Exchange 2013 CU5.
Did my post help? Please use "Vote As Helpful", "Mark as answer" or "Propose as answer". Thank you!Hi,
Yes, the command is specific for provider SpamHaus.
http://tweaks.com/windows/40003/cut-down-on-spam-with-ip-block-list-providers-rbl/
Note: Microsoft is providing this information as a convenience to you. The sites are not controlled by Microsoft. Microsoft cannot make any representations regarding the quality, safety,
or suitability of any software or information found there. Please make sure that you completely understand the risk before retrieving any suggestions from the above link.
Have you added the additional parameters in the command and did it work?
Thanks,
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact
[email protected]
Simon Wu
TechNet Community Support -
SME 7.1 not working with Exchange 2013 SP1 CU6
Hello, i tried upgrading to SME 7.1 on our Exchange 2013 SP1 CU6, but when trying to configure the Exchange Server in the SME management console using the configuration wizard, it gave an error before the LUN mapping page, saying "Failed to get Exchange information for server" and "The communication object, System.ServiceModel.Channels.ServiceChannel, cannot be used for communication because it is in the Faulted state.". I upgraded Snapdrive to 7.1, verfied all credentials according to the manuals, re-installed and rebooted multiple times (registry and filesystem cleaned, even tried to rename the existing SnapInfo directory, ...), stopped all other services on the server but without any change... Every time when trying to run the configuration wizard, the debug log shows no errors, lists all Exchange information and ends with the following lines:[11/18 12:51:58 155] Exit CSmeCDOExm::GetExchangeStructureInternal 0x0
[11/18 12:51:58 155] Exit CNtapSnapMgr::GetExchangeStructure: 0x0
[11/18 12:51:58 233] Enter CSmeServerBase::~CSmeServerBase ...
[11/18 12:51:58 248] m_ptrSnapShot released
[11/18 12:51:58 248] m_pISnapShot4 released
[11/18 12:51:58 248] m_pISnapShot5 released
[11/18 12:51:58 248] m_pISnapShot6 released
[11/18 12:51:58 248] m_pISnapShot7 released
[11/18 12:51:58 248] m_pISnapShot8 released
[11/18 12:51:58 248] m_pISnapShot9 released I ended up uninstalling SME 7.1 and re-installed SME 7.0 which is working. Exchange Server: ESXi 5.5 VM, Windows Server 2012 R2 (with current patches), Exchange 2013 SP1 CU6 - no DAG, single server installation (in co-existence with Exchange 2010), 4 iSCSI LUNs created with Snapdrive (1x Log, 3x Store), System drive and Exchange installation drive on vmdk Disks (via ESXi -> NFS store on the same NetApp)NetApp: FAS 2240-2 with Data ONTAP 8.1.4P1 7-mode (with complete license bundle) Anyone else got this problem or even better - a solution?We could not reproduce the error with the upgrade workflow.Looking at the error and the relevant function, we could force the problem in following conditions: -SME is configured or ran at the DAG level-one of the following services is stopped or not responding on one nodes of the DAG Snapdrive Service, Snapmanager Service, Snapdrive Storage Management Service,Snapdrive Management Service. Would be good if we could get the output of following powershell cmdlet before and after the upgrade: Get-Service –ComputerName Node1, Node2, Node3 –name Snap*, SDMGMT*, SWSvc Best regards,Dan
-
POP3 is not working in Exchange 2013
Hi,
Facing Wiered issue in Exchange 2013, POP3 is not working ... When configuring POP3 in outlook it failed to authenticate.
unknown user name or bad password. [Error=ProxyNotAuthenticated Proxy=ZAJNBEXC03.cws.sasol.com:1995:SSL]"
AmitCredentials are correct
Here is the output ..... pls. let me know if this is correct
[PS] C:\Windows\system32>Get-PopSettings |fl
RunspaceId : ecc593c8-067e-4d9d-aca1-c121295b8499
Name : 1
ProtocolName : POP3
MaxCommandSize : 512
MessageRetrievalSortOrder : Ascending
UnencryptedOrTLSBindings : {[::]:110, 0.0.0.0:110}
SSLBindings : {[::]:995, 0.0.0.0:995}
InternalConnectionSettings : {ZAJNBEXC02.cws.sasol.com:995:SSL, ZAJNBEXC02.cws.sasol.com:110:TLS}
ExternalConnectionSettings : {ZAJNBEXC02.cws.sasol.com:995:SSL}
X509CertificateName : mail.sasol.com
Banner : The Microsoft Exchange POP3 service is ready on ZAJNBEXC02.
LoginType : PlainTextLogin
AuthenticatedConnectionTimeout : 00:30:00
PreAuthenticatedConnectionTimeout : 00:01:00
MaxConnections : 2147483647
MaxConnectionFromSingleIP : 2147483647
MaxConnectionsPerUser : 16
MessageRetrievalMimeFormat : BestBodyFormat
ProxyTargetPort : 1995
CalendarItemRetrievalOption : iCalendar
OwaServerUrl :
EnableExactRFC822Size : False
LiveIdBasicAuthReplacement : False
SuppressReadReceipt : False
ProtocolLogEnabled : True
EnforceCertificateErrors : False
LogFileLocation : D:\Program Files\Microsoft\Exchange Server\V15\Logging\Pop3
LogFileRollOverSettings : Daily
LogPerFileSizeQuota : 0 B (0 bytes)
ExtendedProtectionPolicy : None
EnableGSSAPIAndNTLMAuth : True
Server : ZAJNBEXC02
AdminDisplayName :
ExchangeVersion : 0.10 (14.0.100.0)
DistinguishedName : CN=1,CN=POP3,CN=Protocols,CN=ZAJNBEXC02,CN=Servers,CN=Exchange Administrative
Group (FYDIBOHF23SPDLT),CN=Administrative Groups,CN=Sasol,CN=Microsoft
Exchange,CN=Services,CN=Configuration,DC=cws,DC=sasol,DC=com
Identity : ZAJNBEXC02\1
Guid : 4c5d5409-1b4a-4127-a4cd-11b064156322
ObjectCategory : cws.sasol.com/Configuration/Schema/ms-Exch-Protocol-Cfg-POP-Server
ObjectClass : {top, protocolCfg, protocolCfgPOP, protocolCfgPOPServer}
WhenChanged : 2015-02-24 08:57:41 AM
WhenCreated : 2014-12-08 11:25:29 AM
WhenChangedUTC : 2015-02-24 06:57:41 AM
WhenCreatedUTC : 2014-12-08 09:25:29 AM
OrganizationId :
OriginatingServer : ZAJNBWCWSFGC001.cws.sasol.com
IsValid : True
ObjectState : Unchanged
==================================================================
In my case I have 4 DAG and each having 3 server. .. I am POP test and it is failing with below error
RunspaceId : 75d8800c-3f32-4750-8fe1-940133eaf6e8
LocalSite : AFR-BYN
SecureAccess : True
VirtualDirectoryName :
Url :
UrlType : Unknown
Port : 0
ConnectionType : Plaintext
ClientAccessServerShortName : ZAJNBEXC01
LocalSiteShortName : AFR-BYN
ClientAccessServer : ZAJNBEXC01.cws.sasol.com
Scenario : Create a MailboxSession object.
ScenarioDescription : Creating MailboxSession object to access the mailbox [[email protected]].
PerformanceCounterName :
Result : Failure
Error : Unable to create MailboxSession object to access the mailbox [[email protected]].
Detailed error information:
[Microsoft.Exchange.Data.Storage.WrongServerException]: The user and the mailbox are
in different Active Directory sites. Inner error [Microsoft.Mapi.Ma
UserName : migrationtest3
StartTime : 2015-02-24 10:58:51 AM
Latency : -00:00:00.0010000
EventType : Error
LatencyInMillisecondsString :
Identity :
IsValid : True
ObjectState : New
Amit -
AutoReplyState is Enabled. But still OOF is not working on exchange 2013
Hi All,
We have exchange 2013 installed. How can I make our OOF (Out of Office) reply works?
Thanks in advance.
JakeHi Sneff,
Sorry, but I can't find anything on my event viewer that is "MSExchangeMailboxAssistants". Do i need to start the "Microsoft Account Sign-in Assistant" in services?
Checking oof with
https://testconnectivity.microsoft.com/. I got lots of "x". Please give some advice :
Exchange Web Services synchronization, notification, availability, and Automatic Replies.
Not all tests of Exchange Web Services tasks completed.
Additional Details
Elapsed Time: 42852 ms.
Test Steps
The Microsoft Connectivity Analyzer is attempting to test Autodiscover for blank.com.ph.
Testing Autodiscover failed.
Additional Details
Elapsed Time: 42852 ms.
Test Steps
Attempting each method of contacting the Autodiscover service.
The Autodiscover service couldn't be contacted successfully by any method.
Additional Details
Elapsed Time: 42852 ms.
Test Steps
Attempting to test potential Autodiscover URL https://blank.com.ph:443/Autodiscover/Autodiscover.xml
Testing of this potential Autodiscover URL failed.
Additional Details
Test Steps
Attempting to test potential Autodiscover URL https://autodiscover.blank.com.ph:443/Autodiscover/Autodiscover.xml
Testing of this potential Autodiscover URL failed.
Additional Details
Elapsed Time: 21299 ms.
Test Steps
Attempting to resolve the host name autodiscover.blank.com.ph in DNS.
The host name resolved successfully.
Additional Details
Testing TCP port 443 on host autodiscover.blank.com.ph to ensure it's listening and open.
The specified port is either blocked, not listening, or not producing the expected response.
<label for="testSelectWizard_ctl12_ctl06_ctl00_ctl00_ctl01_ctl01_tmmArrow">Tell
me more about this issue and how to resolve it</label>
Additional Details
Attempting to contact the Autodiscover service using the HTTP redirect method.
The attempt to contact Autodiscover using the HTTP Redirect method failed.
Additional Details
Test Steps
Attempting to contact the Autodiscover service using the DNS SRV redirect method.
The Microsoft Connectivity Analyzer failed to contact the Autodiscover service using the DNS SRV redirect method.
Additional Details
Test Steps
Checking if there is an autodiscover CNAME record in DNS for your domain 'blank.com.ph' for Office 365.
Failed to validate autodiscover CNAME record in DNS. If your mailbox isn't in Office 365, you can ignore this warning.
<label for="testSelectWizard_ctl12_ctl06_ctl00_ctl00_ctl04_tmmArrow">Tell
me more about this issue and how to resolve it</label>
Additional Details
There is no Autodiscover CNAME record for your domain 'blank.com.ph'.
Elapsed Time: 24 ms.
Thanks
Jake -
Lync integration not working after Exchange 2013 SP1 is installed...
Hi,
I have two Exchange 2013 servers running and everything is fine, almost.
The problem is that on the first server we had OWA with Lync integration working before installing SP1, but after the installation of SP1, it doesn't Work any more.
The second server was installed with SP1 from the start, but we can't get the Lync integration to Work on this one either..
When we log in to OWA, it just starts to sign in but then says "there was a problem signing in, if this continues please contact your helpdesk"
I have checked the Exchange server for events, and i can see the event ID 112 everytime i recycle the Application Pool, so there are some connection between Exchange and Lync..
Have any of you Guys seen or experienced any thing like this?
Thanks in advance.
Regards
KennethHi,
I recommend that you refer to the following article to troubleshoot the issue:
Troubleshooting tips for Exchange 2013 OWA IM Integration to Lync 2013
This post describes how to configure Exchange 2013 OWA to have IM integration to Lync 2013. Here I would like to give some troubleshooting tips in case you can't get the integration to work.
In addition, here is a similar thread for your reference:
Lync 2013 with Exchange 2013 SP1 OWA integration failed
Hope this helps!
Thanks.
Niko Cheng
TechNet Community Support -
Server 2012 R2 user profile disks and outlook search not working
Hi,
I`m having a problem with my setup for quite some time now with Windows Search and indexing the outlook OST files.
I`m using user profile disks in my setup but it seems that Windows Search can`t index the user profile disks, hence when i`m searching in outlook (the OST file is located in the user profile disk) with windows search enabled i`m not getting any results because
it can`t index the OST file.
If I don`t use the disks then windows search works fine but because i`m using clustered TS servers I need the profile disks and I don`t want to go back to redirects if possible..
At the moment I`ve disabled Windows Search which forces outlook to search online, it works but is slow..Next issue that popped up, after the user logs off it will deleted the indexed data and start over the next time the user logs on..
Any fix for that?
There are three other Technet threads describing the same exact problem about indexing data being deleted when a user logs off from RDS. I'm experiencing this bug also and haven't found anything to fix it yet.
https://social.technet.microsoft.com/Forums/windowsserver/en-US/dffeb258-b985-452b-82f3-b66b950b98b6/user-profile-disks-with-windows-search?forum=winserverTS
https://social.technet.microsoft.com/Forums/windowsserver/en-US/e6d4e3e6-37ef-488c-86ac-d135e3f2353f/windows-search-index-and-user-profile-disks?forum=winserverTS
https://social.technet.microsoft.com/Forums/windowsserver/en-US/dc6328e9-96dc-4377-a23f-0fb7020e5daa/indexing-user-profile-disk-on-a-file-server-or-on-the-rdsh-server?forum=winserverTS
my PC Techs http://www.mypctechs.com -
Manage Content and Structure is not working after Sahrepoint 2013 Upgrade
Hi Everyone,
Recently I upgrade SharePoint 2013,Now portal is running SharePoint 2010 mode,when i try to open Manage
Content and Structure by site Action or by site setting got error.
Unable to open.
Help is appreciated.
Hasan Jamal Siddiqui(MCTS,MCPD,ITIL@V3),Sharepoint and EPM Consultant,TCS
|
| TwitterHi Pratik Vyas,
I tried same command but still same issue.
ULS loag as per Correlation ID
: 06
/18/2014 18:55:22.62 w3wp.exe (0x19AC) 0x1D84 SharePoint Foundation Logging Correlation Data 77a3 Verbose Starting correlation. d61d9c9c-fb87-40aa-2f29-f84040327d17 06/18/2014 18:55:22.62 w3wp.exe (0x19AC) 0x1D84 SharePoint Foundation Logging Correlation Data
xmnv Medium Name=Request (GET:http://ABC/_layouts/sitemanager.aspx?Source=/_layouts/settings.aspx) d61d9c9c-fb87-40aa-2f29-f84040327d17 06/18/2014 18:55:22.62 w3wp.exe (0x19AC) 0x1D84 SharePoint Foundation Monitoring nasq Verbose Entering monitored scope (RequestManagement
Processing). Parent Request (GET:http://ABC/_layouts/sitemanager.aspx?Source=/_layouts/settings.aspx) d61d9c9c-fb87-40aa-2f29-f84040327d17
06/18/2014 18:55:22.71 w3wp.exe (0x19AC) 0x12F4 SharePoint Foundation General 8nca Medium Application error when access /_layouts/sitemanager.aspx, Error=Object reference not set to an instance of an object. at Microsoft.SharePoint.Publishing.Internal.WebControls.ObjectSerializer.DeleteAllowed(Boolean
checkPermissions) at Microsoft.SharePoint.Publishing.Internal.WebControls.SmtButtonField.FormatDataValue(Object dataTextValue, Boolean encode) at System.Web.UI.WebControls.BoundField.OnDataBindField(Object sender, EventArgs e) at System.Web.UI.Control.DataBind(Boolean
raiseOnDataBinding) at System.Web.UI.Control.DataBindChildren() at System.Web.UI.Control.DataBind(Boolean raiseOnDataBinding) at System.Web.UI.WebControls.GridView.CreateRow(Int32 rowIndex, Int32 dataSourceIndex, DataControlRowType rowType, DataControlRowState
rowState, Boolean dataBind, Obj... d61d9c9c-fb87-40aa-2f29-f84040327d17 06/18/2014
18:55:22.62 w3wp.exe (0x19AC) 0x1D84 SharePoint Foundation Monitoring nasq Verbose Entering monitored scope (SPRequestManagement.GetRoutingTargets). Parent RequestManagement Processing d61d9c9c-fb87-40aa-2f29-f84040327d17 06/18/2014 18:55:22.62 w3wp.exe (0x19AC)
0x1D84 SharePoint Foundation Request Management aaz9x Verbose Target pool count based on routing rules: 0 d61d9c9c-fb87-40aa-2f29-f84040327d17 06/18/2014
18:55:22.62 w3wp.exe (0x19AC) 0x1D84 SharePoint Foundation Request Management aaz9l Verbose Initial routing target count: 1 d61d9c9c-fb87-40aa-2f29-f84040327d17 06/18/2014 18:55:22.62 w3wp.exe (0x19AC) 0x1D84 SharePoint Foundation Monitoring b4ly Verbose Leaving
Monitored Scope (SPRequestManagement.GetRoutingTargets). Execution Time=0.107330441605982 d61d9c9c-fb87-40aa-2f29-f84040327d17 06/18/2014 18:55:22.62 w3wp.exe (0x19AC) 0x1D84 SharePoint Foundation Monitoring nass Verbose ____CPU Cycles=278457 d61d9c9c-fb87-40aa-2f29-f84040327d17
06/18/2014 18:55:22.62 w3wp.exe (0x19AC) 0x1D84 SharePoint Foundation Request Management ai6y0 Verbose Lowest threshold after evaluating rules '2147483647' d61d9c9c-fb87-40aa-2f29-f84040327d17
06/18/2014 18:55:22.62 w3wp.exe (0x19AC) 0x1D84 SharePoint Foundation Request Management adc7u Medium Mapping URI from 'http://ABC:80/_layouts/sitemanager.aspx?Source=%2F%5Flayouts%2Fsettings%2Easpx' to 'http://ABC/_layouts/sitemanager.aspx?Source=%2F%5Flayouts%2Fsettings%2Easpx'
d61d9c9c-fb87-40aa-2f29-f84040327d17 06/18/2014
18:55:22.62 w3wp.exe (0x19AC) 0x1D84 SharePoint Foundation Request Management aa0ai Verbose Copying incoming headers to outgoing request d61d9c9c-fb87-40aa-2f29-f84040327d17 06/18/2014
18:55:22.62 w3wp.exe (0x19AC) 0x1D84 SharePoint Foundation Request Management agmky Verbose Existing correlation ID found 'd61d9c9c-fb87-40aa-2f29-f84040327d17', adding header to outgoing request d61d9c9c-fb87-40aa-2f29-f84040327d17 06/18/2014 18:55:22.62
w3wp.exe (0x19AC) 0x1D84 SharePoint Foundation Monitoring nasq Verbose Entering monitored scope (RequestManagement Request Upload). Parent Request (GET:http://ABC/_layouts/sitemanager.aspx?Source=/_layouts/settings.aspx) d61d9c9c-fb87-40aa-2f29-f84040327d17
06/18/2014
18:55:22.62 w3wp.exe (0x19AC) 0x1D84 SharePoint Foundation Request Management aeboc Verbose No data was found on the incoming client request d61d9c9c-fb87-40aa-2f29-f84040327d17 06/18/2014 18:55:22.62 w3wp.exe (0x19AC) 0x1D84 SharePoint Foundation Monitoring
b4ly Verbose Leaving Monitored Scope (RequestManagement Request Upload). Execution Time=0.0125155638621816 d61d9c9c-fb87-40aa-2f29-f84040327d17
Hasan Jamal Siddiqui(MCTS,MCPD,ITIL@V3),Sharepoint and EPM Consultant,TCS
|
| Twitter
Maybe you are looking for
-
How to assign select only privilage to a user application wise..?
1-i have a function checking for a user_id and password it works fine. 2-i have a procedure checking for the user privilage Both 1 and 2 stored in a package library,both called from 'ok' button on the main form as follows: DECLARE V_USER_ID user
-
Photo Gallery for mobile devices
I am updating my web pages with HTML5 + CSS3 mainly with Dreamweaver. I would need advice how to create photo gallery for mobile devices, please.
-
Advanced Table in Advanced Table
Hi Gurus, I have advanced table in advanced table , master detail where dept is the master and emp is detail both master and detail had add another row button . In the outer region when i press add another row i can see that new blank record added mo
-
WiFi Keeps Stop Working Since I Starting Using Ext...
Hi, I have used Infinity with Home Hub 3 for 2 years without problems. My main computer is connected via the ethernet. The other devices use WiFi. As the signal strength is low in a couple of rooms I have just purchased and installed an Extender 6
-
I have an ISDN line that is connected by CYTA the telephone authority here in Cyprus, who also issued the Modem, however my ISP is different (they are also in Cyprus and are called Spidernet) My problem is that recently after resetting the WRT54GC V