Redirect on server
How to do a server redirect from http://server1 to http://server2 using the admin console?
You could use NameTrans redirects if you like, but the more of these you have the more unmanageable your obj.lconf will become, and eventually it may start to have a performance impact on the server.
A preferable solution would be to upgrade to Web Server 7.0 and use the Lookup function. This would allow you to have an external name/value file that is evaluated as a single NameTrans.
Similar Messages
-
Remote Desktop local printer redirection problem - Server 2012 Foundation
Hi,
I am trying to print from Windows Server 2012 Foundation to my local printer hosted on Windows 7.
When I enable local resources in the RDP client, I can see my printers on the server like redirected. All seems like no problem occured. But only print does not work. ;-)
I can see the document name in the queue with Error status.
I tried set up GP with disabling Easy print, the drivers are identical on both machines, event logs are clear.
The server is freshly installed, running only File server role. No Domain controller role is set. No Terminal Service is set (i think in Foundation is it not possible), only allowed RDP.
RDP client is the newest. I have not any problem to print from other servers (WS2003, WS2008R2) using this printer. Everytime is the printer automatically redirected to TS*** port and works.
I spent few hours searching solution with no effect.
Any idea? Many thanks!Hi,
Did you find any error message during this issue?
Please check you have enabled necessary port for printer redirection on server side. You can check “Do not allow client print redirection” is disable under GPO setting. Also the user must have enough permission to print the document. Please check below link
for more information.
1. Terminal Server and Printer Redirection
2. Five reasons printer redirection causes Windows printing problems in RDS
Hope it helps!
Thanks,
Dharmesh -
301 Wiki SSL redirect via Server Admin not working
I can't get http://myserver.com/wiki to redirect to https://myserver.com/wiki. I have other 301 redirects to send users to https pages working fine. How can I fix this? Thanks for your time - it's much appreciated. (Mavericks/Server Admin 3.1.2)
Regarding the redirect, I don't really understand why it's not possible. You can edit the non-SSL website in Web and add a 301 for /Wiki to redirect to https://myserver.com/wiki. In fact you can redirect the entire site to SSL - but that is problematic. I can understand why Mavericks server would be designed to automatically use SSL for wiki logins, if it's available. I only looked at redirects because this was not working. Without a redirect or with a redirect - I can login to Wiki via non-SSL or SSL. Where (specifically in which text file) are these redirects created using Server Admin written to? I can't find them in apache2/httpd.conf. Thanks again for your help.
-
HTTPS redirect from server on CSS 11501
Hi,
I make HTTPS request to server via CSS and now my question is can i get the response from the server in HTTP mode due to redirect function. I want to put it in HTTPS is this possible???
Regards
SaraAre you offloading SSL on CSS and sending clear traffic to servers and servers and sending back redirects using http? If thats the issue and you want clients to get redirects with https Use urlrewrite feature on CSS
details at
http://www.cisco.com/en/US/docs/app_ntwk_services/data_center_app_services/css11500series/v8.10/configuration/ssl/guide/terminat.html#wp999332
Syed Iftekhar Ahmed -
Reader 11.0.3 unusable after APPDATA redirection to server
Hello everyone,
Clients: Windows 7 Enterprise SP1 x64
Server: Windows 2008 Enterprise R2 SP1 x64
Adobe Reader XI (11.0.3)
All users are configured to use roaming profiles and folder redirection.
Folder redirection, Dfs link to a file server in our datacenter, is set for: Documents, Downloads, Desktop, Links, Favorites, Videos and Searches.
Roaming Profiles are configured to use a Dfs link to a file server in our datacenter.
Initially, we had APPDATA set to point to a local folder: C:\Users\UserName\AppData\Roaming
We're testing using folder redirection for APPDATA folder, but in our lab we noticed that Adobe Reader XI basically stops working after we enabled this policy. Even if we just launch Adobe Reader, the application goes into Not Responding... and never exists out of that state. (see screenshot)
Anyone knows how to get Adobe Reader XI to work again, but with APPDATA redirected to a server share?
Thanks!Pat,
Thanks so much for your reply.
Disabling Protected Mode did the trick for me. Closing Reader and re-opening didn't seem to take, but after restarting my test machine, viewing a PDF is now so much faster and the application is now useable again. I'm going to keep running some tests to make sure I duplicate every possible scenario, but this is a great start, thanks!! -
Clipboard redirection gpo server 2012r2
HI ,
I am in the process of testing server2012 in our domain .
And i got a small issue with the clipboard redirection computer GPO .
We currently allow copy /paste via RDP for some server .
Everything working fine for server 2008r2 , forest level 2008r2 all with all 2012 template up to date .
This gpo setting as been working for year without a itch under 2008r2 .
But i cannot get it to work under server 2012 or 2012 r2 .
my gpresult , rsop, and regkey setting show the the proper setting on my server2012 test server and properly applied .
All my other TS config are looking fine . Even my ts clipboard monitor running fine .
But my copy paste either in or out off the server is always gray out .
Anyone have a hint how i can debug this .
I have reset user profile even new account got this issue.
i am talking about
Windows Components/Remote Desktop Services/Remote Desktop Session Host/Device and Resource Redirection
Do not allow Clipboard redirection set to -> Disabledit really a gpo thing ... same account as soon as i joint the domain i lost the functionality
local admin or domain admin ...
but it funny it allow copy paste for like notepad to notepad .
but i cannot copy a file anymore , like desktop to desktop , and it what i am trying to debug
Is there a new setting for 2012 a miss cause under 2008 it working fine.
Here a gpresult and it cleary show the proper setting
ill get back tommorow.
GPO: Default Domain Policy
Policy: @wsecedit.dll,-59058
ValueName: MACHINE\System\CurrentControlSet\Control\Lsa\NoLMHash
Computer Setting: 1
N/A
Event Log Settings
N/A
Restricted Groups
GPO: DEV_ADMIN_SERVER
Groupname: Administrators
Members: TINK\DEV_ADMIN_SRV_L
TINK\Domain Admins
TINK\Enterprise Admins
System Services
N/A
Registry Settings
N/A
File System Settings
N/A
Public Key Policies
N/A
Administrative Templates
GPO: TS_SETTING_DEV
Folder Id: SOFTWARE\Policies\Microsoft\Windows NT\Terminal Services\fDisablePNPRedir
Value: 1, 0, 0, 0
State: Enabled
GPO: IE_Security
Folder Id: Software\Policies\Microsoft\Internet Explorer\Control Panel\History
Value: 1, 0, 0, 0
State: Enabled
GPO: TS_SETTING_DEV
Folder Id: SOFTWARE\Policies\Microsoft\Windows NT\Terminal Services\fDisableCam
Value: 1, 0, 0, 0
State: Enabled
GPO: WSUS_INT_SRV
Folder Id: Software\Policies\Microsoft\Windows\WindowsUpdate\AU\DetectionFrequencyEnabled
Value: 1, 0, 0, 0
State: Enabled
GPO: ALL_DNS_SETTING
Folder Id: Software\Policies\Microsoft\Windows NT\DNSClient\RegistrationEnabled
Value: 1, 0, 0, 0
State: Enabled
GPO: ALL_DNS_SETTING
Folder Id: Software\Policies\Microsoft\Windows NT\DNSClient\RegisterReverseLookup
Value: 2, 0, 0, 0
State: Enabled
GPO: Default Domain Policy
Folder Id: Software\Policies\Microsoft\Windows\System\GroupPolicyRefreshTime
Value: 15, 0, 0, 0
State: Enabled
GPO: TS_SETTING_DEV
Folder Id: SOFTWARE\Policies\Microsoft\Windows NT\Terminal Services\DeleteTempDirsOnExit
Value: 1, 0, 0, 0
State: Enabled
GPO: ALL_POWERSHELL_ALLOW
Folder Id: Software\Policies\Microsoft\Windows\PowerShell\EnableScripts
Value: 1, 0, 0, 0
State: Enabled
GPO: WSUS_INT_SRV
Folder Id: Software\Policies\Microsoft\Windows\WindowsUpdate\AU\RebootWarningTimeoutEnabled
Value: 1, 0, 0, 0
State: Enabled
GPO: ALL_FIREWALL
Folder Id: SOFTWARE\Policies\Microsoft\WindowsFirewall\PublicProfile\EnableFirewall
Value: 0, 0, 0, 0
State: Enabled
GPO: TS_SETTING_DEV
Folder Id: SOFTWARE\Policies\Microsoft\Windows NT\Terminal Services\fDisableClip
Value: 0, 0, 0, 0
State: Enabled
GPO: ALL_DNS_SETTING
Folder Id: Software\Policies\Microsoft\Windows NT\DNSClient\AppendToMultiLabelName
Value: 1, 0, 0, 0
State: Enabled
GPO: Default Domain Policy
Folder Id: Software\Policies\Microsoft\Windows\System\GroupPolicyRefreshTimeOffsetDC
Value: 0, 0, 0, 0
State: Enabled
GPO: ALL_DNS_SETTING
Folder Id: Software\Policies\Microsoft\Windows NT\DNSClient\RegistrationRefreshInterval
Value: 16, 14, 0, 0
State: Enabled
GPO: WSUS_INT_SRV
Folder Id: Software\Policies\Microsoft\Windows\WindowsUpdate\AU\AUPowerManagement
Value: 1, 0, 0, 0
State: Enabled
GPO: TS_SETTING_DEV
Folder Id: SOFTWARE\Policies\Microsoft\Windows NT\Terminal Services\MaxIdleTime
Value: 0, 112, 153, 20
State: Enabled
GPO: ALL_POWERSHELL_ALLOW
Folder Id: Software\Policies\Microsoft\Windows\PowerShell\ExecutionPolicy
Value: 85, 0, 110, 0, 114, 0, 101, 0, 115, 0, 116, 0, 114, 0, 105, 0, 99, 0, 116, 0, 101, 0, 100, 0, 0, 0
State: Enabled
GPO: IE_Security
Folder Id: Software\Policies\Microsoft\Windows\System\UserPolicyMode
Value: 2, 0, 0, 0
State: Enabled
GPO: Default Domain Policy
Folder Id: Software\Policies\Microsoft\Windows\System\GroupPolicyRefreshTimeOffset
Value: 5, 0, 0, 0
State: Enabled
GPO: WSUS_INT_SRV
Folder Id: Software\Policies\Microsoft\Windows\WindowsUpdate\AU\RescheduleWaitTime
Value: 5, 0, 0, 0
State: Enabled
GPO: WSUS_INT_SRV
Folder Id: Software\Policies\Microsoft\Windows\WindowsUpdate\AU\UseWUServer
Value: 1, 0, 0, 0
State: Enabled
GPO: TS_SETTING_DEV
Folder Id: SOFTWARE\Policies\Microsoft\Windows NT\Terminal Services\fEnableSmartCard
Value: 0, 0, 0, 0
State: Enabled
GPO: WSUS_INT_SRV
Folder Id: Software\Policies\Microsoft\Windows\WindowsUpdate\TargetGroupEnabled
Value: 1, 0, 0, 0
State: Enabled
GPO: TS_SETTING_DEV
Folder Id: SOFTWARE\Policies\Microsoft\Windows NT\Terminal Services\fDisableAudioCapture
Value: 1, 0, 0, 0
State: Enabled
GPO: ALL_FIREWALL
Folder Id: SOFTWARE\Policies\Microsoft\WindowsFirewall\PolicyVersion
Value: 10, 2, 0, 0
State: Enabled
GPO: WSUS_INT_SRV
Folder Id: Software\Policies\Microsoft\Windows\WindowsUpdate\AU\RescheduleWaitTimeEnabled
Value: 1, 0, 0, 0
State: Enabled
GPO: TS_SETTING_DEV
Folder Id: SOFTWARE\Policies\Microsoft\Windows NT\Terminal Services\fResetBroken
Value: 1, 0, 0, 0
State: Enabled
GPO: ALL_FIREWALL
Folder Id: SOFTWARE\Policies\Microsoft\WindowsFirewall\DomainProfile\EnableFirewall
Value: 0, 0, 0, 0
State: Enabled
GPO: IE_Security
Folder Id: Software\Policies\Microsoft\Windows\CurrentVersion\Internet Settings\Cache\Persistent
Value: 0, 0, 0, 0
State: Enabled
GPO: WSUS_INT_SRV
Folder Id: Software\Policies\Microsoft\Windows\WindowsUpdate\TargetGroup
Value: 83, 0, 82, 0, 86, 0, 95, 0, 73, 0, 78, 0, 84, 0, 0, 0
State: Enabled
GPO: TS_SETTING_DEV
Folder Id: SOFTWARE\Policies\Microsoft\Windows NT\Terminal Services\fDisableCpm
Value: 1, 0, 0, 0
State: Enabled
GPO: ALL_FIREWALL
Folder Id: SOFTWARE\Policies\Microsoft\WindowsFirewall\PrivateProfile\EnableFirewall
Value: 0, 0, 0, 0
State: Enabled
GPO: IE_Security
Folder Id: Software\Policies\Microsoft\Windows\CurrentVersion\Internet Settings\ZoneMap\AutoDetect
Value: 0, 0, 0, 0
State: Enabled
GPO: TS_SETTING_DEV
Folder Id: SOFTWARE\Policies\Microsoft\Windows NT\Terminal Services\MaxDisconnectionTime
Value: 0, 20, 115, 15
State: Enabled
GPO: WSUS_INT_SRV
Folder Id: Software\Policies\Microsoft\Windows\WindowsUpdate\WUServer
Value: 104, 0, 116, 0, 116, 0, 112, 0, 58, 0, 47, 0, 47, 0, 98, 0, 117, 0, 114, 0, 116, 0, 105, 0, 110, 0, 107, 0, 119, 0, 115, 0, 117, 0, 115, 0, 48, 0, 50, 0, 46, 0, 116, 0, 105,
0, 110, 0, 107, 0, 46, 0, 108, 0, 111, 0, 99, 0, 97, 0, 108, 0, 0, 0
State: Enabled
GPO: ALL_NO_IE_WIZARD
Folder Id: Software\Policies\Microsoft\Internet Explorer\Main\DisableFirstRunCustomize
Value: 1, 0, 0, 0
State: Enabled
GPO: WSUS_INT_SRV
Folder Id: Software\Policies\Microsoft\Windows\WindowsUpdate\AU\AUOptions
Value: 4, 0, 0, 0
State: Enabled
GPO: ALL_Power_Options
Folder Id: Software\Policies\Microsoft\Power\PowerSettings\ActivePowerScheme
Value: 56, 0, 99, 0, 53, 0, 101, 0, 55, 0, 102, 0, 100, 0, 97, 0, 45, 0, 101, 0, 56, 0, 98, 0, 102, 0, 45, 0, 52, 0, 97, 0, 57, 0, 54, 0, 45, 0, 57, 0, 97, 0, 56, 0, 53, 0, 45, 0,
97, 0, 54, 0, 101, 0, 50, 0, 51, 0, 97, 0, 56, 0, 99, 0, 54, 0, 51, 0, 53, 0, 99, 0, 0, 0
State: Enabled
GPO: SRV_NO_ICT
Folder Id: Software\Policies\Microsoft\Windows\Server\InitialConfigurationTasks\DoNotOpenAtLogon
Value: 1, 0, 0, 0
State: Enabled
GPO: TS_SETTING_DEV
Folder Id: SOFTWARE\Policies\Microsoft\Windows NT\Terminal Services\fDisableCcm
Value: 1, 0, 0, 0
State: Enabled
GPO: WSUS_INT_SRV
Folder Id: Software\Policies\Microsoft\Windows\WindowsUpdate\AU\NoAutoUpdate
Value: 0, 0, 0, 0
State: Enabled
GPO: ALL_POWERSHELL_ALLOW
Folder Id: Software\Policies\Microsoft\Windows\PowerShell\EnableScripts
Value: 1, 0, 0, 0
State: Enabled
GPO: SRV_NO_ICT
Folder Id: Software\Policies\Microsoft\Windows\Server\ServerManager\DoNotOpenAtLogon
Value: 1, 0, 0, 0
State: Enabled
GPO: Default Domain Policy
Folder Id: Software\Policies\Microsoft\Windows\System\GroupPolicyRefreshTimeDC
Value: 5, 0, 0, 0
State: Enabled
GPO: TS_SETTING_DEV
Folder Id: SOFTWARE\Policies\Microsoft\Windows NT\Terminal Services\fDenyTSConnections
Value: 0, 0, 0, 0
State: Enabled
GPO: TS_SETTING_DEV
Folder Id: SOFTWARE\Policies\Microsoft\Windows NT\Terminal Services\PerSessionTempDir
Value: 0, 0, 0, 0
State: Enabled
GPO: WSUS_INT_SRV
Folder Id: Software\Policies\Microsoft\Windows\WindowsUpdate\AU\AutoInstallMinorUpdates
Value: 1, 0, 0, 0
State: Enabled
GPO: WSUS_INT_SRV
Folder Id: Software\Policies\Microsoft\Windows\WindowsUpdate\AU\DetectionFrequency
Value: 20, 0, 0, 0
State: Enabled
GPO: WSUS_INT_SRV
Folder Id: Software\Policies\Microsoft\Windows\WindowsUpdate\AU\RebootWarningTimeout
Value: 5, 0, 0, 0
State: Enabled
GPO: IE_Security
Folder Id: Software\Policies\Microsoft\Windows\CurrentVersion\Internet Settings\Url History\DaysToKeep
Value: 180, 0, 0, 0
State: Enabled
GPO: ALL_DNS_SETTING
Folder Id: Software\Policies\Microsoft\Windows NT\DNSClient\SearchList
Value: 116, 0, 105, 0, 110, 0, 107, 0, 46, 0, 108, 0, 111, 0, 99, 0, 97, 0, 108, 0, 44, 0, 116, 0, 105, 0, 110, 0, 107, 0, 113, 0, 97, 0, 46, 0, 116, 0, 105, 0, 110, 0, 107, 0, 46,
0, 108, 0, 111, 0, 99, 0, 97, 0, 108, 0, 44, 0, 116, 0, 105, 0, 110, 0, 107, 0, 116, 0, 97, 0, 99, 0, 46, 0, 116, 0, 105, 0, 110, 0, 107, 0, 46, 0, 108, 0, 111, 0, 99, 0, 97, 0, 108, 0, 44, 0, 116, 0, 105, 0, 110, 0, 107, 0, 112, 0, 114, 0, 111, 0, 100, 0,
46, 0, 99, 0, 116, 0, 105, 0, 46, 0, 108, 0, 111, 0, 99, 0, 97, 0, 108, 0, 44, 0, 115, 0, 50, 0, 105, 0, 46, 0, 99, 0, 111, 0, 109, 0, 44, 0, 115, 0, 50, 0, 105, 0, 119, 0, 101, 0, 98, 0, 46, 0, 99, 0, 111, 0, 109, 0, 44, 0, 116, 0, 105, 0, 110, 0, 107, 0,
110, 0, 101, 0, 116, 0, 46, 0, 99, 0, 97, 0, 0, 0
State: Enabled
GPO: WSUS_INT_SRV
Folder Id: Software\Policies\Microsoft\Windows\WindowsUpdate\WUStatusServer
Value: 104, 0, 116, 0, 116, 0, 112, 0, 58, 0, 47, 0, 47, 0, 98, 0, 117, 0, 114, 0, 116, 0, 105, 0, 110, 0, 107, 0, 119, 0, 115, 0, 117, 0, 115, 0, 48, 0, 50, 0, 46, 0, 116, 0, 105,
0, 110, 0, 107, 0, 46, 0, 108, 0, 111, 0, 99, 0, 97, 0, 108, 0, 0, 0
State: Enabled
GPO: IE_Security
Folder Id: Software\Policies\Microsoft\Internet Explorer\Control Panel\AdvancedTab
State: disabled
GPO: TS_SETTING_DEV
Folder Id: SOFTWARE\Policies\Microsoft\Windows NT\Terminal Services\fDisableCdm
Value: 1, 0, 0, 0
State: Enabled
GPO: Default Domain Policy
Folder Id: Software\Policies\Microsoft\Windows\System\AllowX-ForestPolicy-and-RUP
Value: 1, 0, 0, 0
State: Enabled
GPO: TS_SETTING_DEV
Folder Id: SOFTWARE\Policies\Microsoft\Windows NT\Terminal Services\fDisableLPT
Value: 1, 0, 0, 0
State: Enabled
GPO: WSUS_INT_SRV
Folder Id: Software\Policies\Microsoft\Windows\WindowsUpdate\AU\ScheduledInstallTime
Value: 1, 0, 0, 0
State: Enabled
GPO: WSUS_INT_SRV
Folder Id: Software\Policies\Microsoft\Windows\WindowsUpdate\AU\ScheduledInstallDay
Value: 1, 0, 0, 0
State: Enabled
GPO: ALL_POWERSHELL_ALLOW
Folder Id: Software\Policies\Microsoft\Windows\PowerShell\ExecutionPolicy
Value: 85, 0, 110, 0, 114, 0, 101, 0, 115, 0, 116, 0, 114, 0, 105, 0, 99, 0, 116, 0, 101, 0, 100, 0, 0, 0
State: Enabled
USER SETTINGS
Last time Group Policy was applied: 8/27/2014 at 4:44:06 PM
Group Policy was applied from: N/A
Group Policy slow link threshold: 500 kbps
Domain Name: TMPBLEMAYW2K12
Domain Type: Windows 2008 or later
Applied Group Policy Objects
N/A
The following GPOs were not applied because they were filtered out
Local Group Policy
Filtering: Not Applied (Empty)
The user is a part of the following security groups
None
Everyone
Local account and member of Administrators group
BUILTIN\Administrators
BUILTIN\Users
NT AUTHORITY\INTERACTIVE
CONSOLE LOGON
NT AUTHORITY\Authenticated Users
This Organization
Local account
LOCAL
NTLM Authentication
High Mandatory Level
The user has the following security privileges
Bypass traverse checking
Manage auditing and security log
Back up files and directories
Restore files and directories
Change the system time
Shut down the system
Force shutdown from a remote system
Take ownership of files or other objects
Debug programs
Modify firmware environment values
Profile system performance
Profile single process
Increase scheduling priority
Load and unload device drivers
Create a pagefile
Adjust memory quotas for a process
Remove computer from docking station
Perform volume maintenance tasks
Impersonate a client after authentication
Create global objects
Change the time zone
Create symbolic links
Increase a process working set -
How to enable printer redirection in server 2012 (client printer should map in server 2012)
Hello All
I have 3 new 2012 servers by default client printer should map in 2012 server i have enabled in RDP properties but no luck can any one have the idea about this issue.Hi Mohan,
You can refer below links to configure Printer redirection in Windows Server 2012.
Print and Document Services Overview
Configuring Printer Redirection Settings
Printer Redirection
Regards,
Manjunath Sullad -
Printer redirection using Server 2008 R2 RDS
Hi
I have a server 2008 R2 (not a domain controller) running as a remote desktop session host with 2 remote XP SP3 client PCs connecting to it. Up until Friday last week these client PCs could successfully print via the redirected printer using the RD Easy
Print Driver. As from this week though all printing has ceased! No updates have been installed on either server or clients in the interim. When I try to send a test print from the server (logged on using RD 7 for XP) it tells me that the test print has failed,
do I want to run the troubleshooter? If I say yes then the troubleshooter fails with an unexpected error, the details of which include error code 0x80070057. If i try to print from the server using notepad I get the error "the parameter is incorrect". If I
print from wordpad the document appears briefly in the queue but nothing prints. If I manually add a printer (using specific printer driver - not easy print driver) and choose the correct redirected port and then print using this printer, the print job appears
briefly in the queue and then disappears - nothing appears in the print queue on the client PC and nothing prints. Initially printing like this caused the client TsWpfWrp.exe to fail but upgrading the version of TsWpfWrp.exe stopped this problem. I have tried
updating to .net 4.0 on the client PC, upgrading from RD 6.1 to 7.0, XP SP2 to SP3 all to no avail.
Does anyone know the solution to this problem? I am at a complete loss as to the way forward. I have checked all group policies and set all the correct permissions on the spool and PRINTERS folder in system32 on the server and nothing seems to help.
Thanks for your help!Hi,
Please try to check the following items.
1.
Remove the Remote desktop easy print from Print Management console.
2.
Remove the complete package.
3.
Then install the Remote desktop easy print driver again.
Please also check if the
fenableRDR key still exists in the HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Terminal Server\Wds\rdpwd.
Technology changes life…… -
Redirect print server webpage in a 2008 R2 Failover Cluster.
I am configuring a 2 node 2008 R2 Failover Cluster with print services as a resource. On a client, i can install a printer by going to the website http://virtualprintserver.domain/printers/, selecting a printer and click on connect.
To prevent showing the default IIS page, i want to redirect http://virtualprintserver.domain to http://virtualprintserver.domain/printers/.
How can i achieve this? I have searched in IIS manager, but could not find anything.
Thank you for your help.Solved!
After consulting a colleague with web design knowledge we came up with the following solution:
Go to %SystemDrive%\inetpub\wwwroot\
Rename iisstart.htm in iisstart.htm.old
Create a new index.htm file with the code: <html><head><title></title><meta http-equiv="refresh" content="0;URL=http://virtualprintserver.domain/printers" /></head><body></body></html>
Reset IIS -
Servlet redirecting at Server side
Hi,
I need to redirect to a Servlet on another Servlet.
response.sendRedirect("http://www.xyz.com/servlet/customerserviceServlet.TestServlet.do");
I need to pass some request parameter. I know one method is to pass the parameter through the URL.
However due to some security constraints I cannot use this method.
Is there an alternate approach to this? Can I send the parameters using Header. If yes, then how?
Thanks!!You cannot. Besides, being able to modify the header is just as big a security risk as sending the parameters as part of the url. Any idiot can install a packet sniffer and see what is inside the header. Perhaps encrypting the parameters is better?
-
Don't Want to Give User URL of server/pls/portal30 How Do I Redirect User?
Hi,
How do I perform a redirect so if my portal application is at
myserver/pls/portal30, but all i want is for my end-users to
type in the server name and it redirects them to the portal
app? I also do not want end-users obviously to hit the Apache
page.
Thanks in Advance,
AndyJust create an html file with this code :
<html>
<body onload=window.location.replace("server/pls/portal30")>
</body>
</html>
Save it in the path $OAS9i_HOME/Apache/Apache/htdocs as
index.html.
When the user access http://server the html file is going to
make the redirection.
Another solutions is putting this line in apache config file
(httpd.conf located on $OAS9i_HOME/Apache/Apache/conf):
Redirect / http://server/pls/portal30
Good look. -
i play games on facebook: cityville, frontierville...when you try to help others with missions. you click on things they need which then directs you to a page that registers what you sent in that specific game/or to open the game. There are times when I am redirected there / then there are times I am not. Here lately I am getting a white screen which says the page isn't redirecting properly, server redirecting in a way that will never be completed...it also says this problem can sometime be caused by disabling or refusing to accept cookies..I went to the firefox site and did what was suggested by firefox when there may be a cookie problem with to no avail...please help
If clearing the cookies doesn't help then it is possible that the file <i>cookies.sqlite</i> that stores the cookies is corrupted.
Rename (or delete) <b>cookies.sqlite</b> (cookies.sqlite.old) and delete <b>cookies.sqlite-journal</b> and <b>cookies.txt</b>, if they exist, in the [http://kb.mozillazine.org/Profile_folder_-_Firefox Profile Folder] in case the file cookies.sqlite got corrupted.
* http://kb.mozillazine.org/Cookies#Removing_cookies -
Redirect Remote App to a Particular server
Hi Guys,
I have a terminal services farm with 2 RDS host servers
We are using published applications. Users logon and get their applications and then get redirected to either of the servers in the farm server 1 & server 2
We seem to have an issue with one of the servers...I have published Wordpad to test this but I cannot seem to get logged onto server2 when I want to simulate the issue and begin troubleshooting
I need to either be able to publish this app to just one server ? like Citrix ..but i dont think this can be achieved?
Or have a user always logon to this server2 each time and not server 1 .
I know I can disable logon for the server 1 but that would effect all apps.....
Anyone have any ideas?Hi,
Sorry to say but all servers which are member of same RD Farm name are expected to have access of all application installed. We cannot control which specific server in a RD Farm a user is directed to. Still we can configure RemoteApp under RDSH server and assign
the user to connect to the specific RemoteApp by assigning RemoteApp User Assignment.
By this way, suppose we install WordPad as RemoteApp on RDSH server 1 and Notepad as RemoteApp on RDSH server 2 then provide the access to the specific user to access that RemoteApp under user assignment and don’t allow under other App so that specific user
can only access the assigned RemoteApp.
Anyway for redirection of server is managed by RDCB and there are different ways now to handle such as DNS RR, NLB, Hardware Load balancer or Dedicated Farm redirection and it depends on you what you prefer for your environment.
More detail.
Introducing RemoteApp User Assignment
http://blogs.msdn.com/b/rds/archive/2009/06/12/introducing-remoteapp-user-assignment.aspx
Hope it helps!
Thanks.
Dharmesh Solanki
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Support, contact [email protected] -
Unable to start the managed server throw NodeManager
Hello!
We have a problem to start Managed Servers throw Node manager.
We get an error:
<Jan 26, 2012 2:17:54 PM> <INFO> <peoplesoft> <PIA1> <Boot identity properties saved to "/software/psoft/pt851/webserv/peoplesoft/servers/PIA1/data/nodemanager/boot.properties">
Jan 26, 2012 2:17:54 PM weblogic.nodemanager.server.ServerManager log
INFO: Boot identity properties saved to "/software/psoft/pt851/webserv/peoplesoft/servers/PIA1/data/nodemanager/boot.properties"
<Jan 26, 2012 2:17:54 PM> <INFO> <peoplesoft> <PIA1> <Startup configuration properties saved to "/software/psoft/pt851/webserv/peoplesoft/servers/PIA1/data/nodemanager/startup.properties">
Jan 26, 2012 2:17:54 PM weblogic.nodemanager.server.ServerManager log
INFO: Startup configuration properties saved to "/software/psoft/pt851/webserv/peoplesoft/servers/PIA1/data/nodemanager/startup.properties"
<Jan 26, 2012 2:17:54 PM> <INFO> <peoplesoft> <PIA1> <Server error log also redirected to server log>
Jan 26, 2012 2:17:54 PM weblogic.nodemanager.server.LogFileRotationUtil log
INFO: Server error log also redirected to server log
<Jan 26, 2012 2:17:54 PM> <INFO> <peoplesoft> <PIA1> <Starting WebLogic server with command line: /software/psoft/pt851/webserv/peoplesoft/bin/startManagedWebLogic.sh >
Jan 26, 2012 2:17:54 PM weblogic.nodemanager.server.ServerManager log
INFO: Starting WebLogic server with command line: /software/psoft/pt851/webserv/peoplesoft/bin/startManagedWebLogic.sh
<Jan 26, 2012 2:17:54 PM> <INFO> <peoplesoft> <PIA1> <Working directory is '/software/psoft/pt851/webserv/peoplesoft'>
Jan 26, 2012 2:17:54 PM weblogic.nodemanager.server.ServerManager log
INFO: Working directory is '/software/psoft/pt851/webserv/peoplesoft'
<Jan 26, 2012 2:17:54 PM> <INFO> <peoplesoft> <PIA1> <Rotated server output log to "/software/psoft/pt851/webserv/peoplesoft/servers/PIA1/logs/PIA1.out00001">
Jan 26, 2012 2:17:54 PM weblogic.nodemanager.server.LogFileRotationUtil log
INFO: Rotated server output log to "/software/psoft/pt851/webserv/peoplesoft/servers/PIA1/logs/PIA1.out00001"
<Jan 26, 2012 2:17:54 PM> <INFO> <peoplesoft> <PIA1> <Server error log also redirected to server log>
Jan 26, 2012 2:17:54 PM weblogic.nodemanager.server.LogFileRotationUtil log
INFO: Server error log also redirected to server log
<Jan 26, 2012 2:17:54 PM> <INFO> <peoplesoft> <PIA1> <Server output log file is '/software/psoft/pt851/webserv/peoplesoft/servers/PIA1/logs/PIA1.out'>
Jan 26, 2012 2:17:54 PM weblogic.nodemanager.server.ServerManager log
INFO: Server output log file is '/software/psoft/pt851/webserv/peoplesoft/servers/PIA1/logs/PIA1.out'
<Jan 26, 2012 2:17:54 PM> <INFO> <peoplesoft> <PIA1> <Server failed during startup so will not be restarted>
Jan 26, 2012 2:17:54 PM weblogic.nodemanager.server.ServerManager log
INFO: Server failed during startup so will not be restarted
<Jan 26, 2012 2:17:54 PM> <WARNING> <Exception while starting server 'PIA1'>
java.io.IOException: Server failed to start up. See server output log for more details.
at weblogic.nodemanager.server.ServerManager.start(ServerManager.java:331)
at weblogic.nodemanager.server.Handler.handleStart(Handler.java:567)
at weblogic.nodemanager.server.Handler.handleCommand(Handler.java:118)
at weblogic.nodemanager.server.Handler.run(Handler.java:70)
at java.lang.Thread.run(Thread.java:662)
Jan 26, 2012 2:17:54 PM weblogic.nodemanager.server.Handler handleStart
WARNING: Exception while starting server 'PIA1'
java.io.IOException: Server failed to start up. See server output log for more details.
at weblogic.nodemanager.server.ServerManager.start(ServerManager.java:331)
at weblogic.nodemanager.server.Handler.handleStart(Handler.java:567)
at weblogic.nodemanager.server.Handler.handleCommand(Handler.java:118)
at weblogic.nodemanager.server.Handler.run(Handler.java:70)
at java.lang.Thread.run(Thread.java:662)
Additional information:
weblogic 10.3.3
PT8.51.11
Linux x86_64 RH5
When we starting Manged servers manualy, it's works fine.
Thank you.I'm pretty sure this is the wrong forum for this question. Why don't you try here: WebLogic Server - General
-
In Admin Console We are unable to start Managed Server.
Hi,
We are using Weblogic 10.3.1.0 version.
Totaly 4 Managed Severs
1 Admin Server
with Nodemanger.
In Admin Console When ever we going to Stop the Manged Servers.
1. Environment ----- > Servers ---- > Control ----------- > Mananged Server 1 -----------> Force shutdown
2. Then click refresh button ---- showing "FAILED_NOT_RESTARTABLE"
3. after that when ever we going to start the Managed Server in Admin console
First its Showing ----- Starting
and next its showing ----- FAILED_NOT_RESTARTABLE
4. its not coming to Running State.
In Logs
Domain log
-----------> <1273141345460> <BEA-000450> <Socket 8 internal data record unavailable (probable closure due idle timeout), event received 17>
####<06-May-2010 11:54:40 o'clock BST> <Alert> <WebLogicServer> <ukirt156> <twpserver1> <[ACTIVE] ExecuteThread: '2' for queue: 'weblogic.kernel.Default (self-tuning)'> <weblogic> <> <> <1273143280738> <BEA-000396> <Server shutdown has been requested by weblogic>
####<06-May-2010 11:54:40 o'clock BST> <Notice> <WebLogicServer> <ukirt156> <twpserver1> <[ACTIVE] ExecuteThread: '2' for queue: 'weblogic.kernel.Default (self-tuning)'> <weblogic> <> <> <1273143280771> <BEA-000365> <Server state changed to FORCE_SUSPENDING>
####<06-May-2010 11:54:40 o'clock BST> <Notice> <Cluster> <ukirt156> <twpserver1> <[ACTIVE] ExecuteThread: '2' for queue: 'weblogic.kernel.Default (self-tuning)'> <weblogic> <> <> <1273143280844> <BEA-000163> <Stopping "async" replication service>
####<06-May-2010 11:54:41 o'clock BST> <Notice> <WebLogicServer> <ukirt156> <twpserver1> <[ACTIVE] ExecuteThread: '2' for queue: 'weblogic.kernel.Default (self-tuning)'> <weblogic> <> <> <1273143281061> <BEA-000365> <Server state changed to ADMIN>
####<06-May-2010 11:54:41 o'clock BST> <Notice> <WebLogicServer> <ukirt156> <twpserver1> <[ACTIVE] ExecuteThread: '2' for queue: 'weblogic.kernel.Default (self-tuning)'> <weblogic> <> <> <1273143281064> <BEA-000365> <Server state changed to FORCE_SHUTTING_DOWN>
####<06-May-2010 11:54:41 o'clock BST> <Notice> <Server> <ukirt156> <twpserver1> <DynamicListenThread[Default]> <<WLS Kernel>> <> <> <1273143281113> <BEA-002607> <Channel "Default" listening on 172.21.149.168:7003 was shutdown.>
####<06-May-2010 11:56:30 o'clock BST> <Error> <NodeManager> <ukirt156> <AdminServer> <[ACTIVE] ExecuteThread: '45' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1273143390016> <BEA-300048> <Unable to start the server twpserver1 : Exception while starting server 'twpserver1': java.io.IOException: Server failed to start up. See server output log for more details.>
AdminServer log
<06-May-2010 11:56:30 o'clock BST> <Error> <NodeManager> <BEA-300048> <Unable to start the server twpserver1 : Exception while starting server 'twpserver1': java.io.IOException: Server failed to start up. See server output log for more details.>
<06-May-2010 11:57:33 o'clock BST> <Error> <NodeManager> <BEA-300048> <Unable to start the server twpserver1 : Exception while starting server 'twpserver1': java.io.IOException: Server failed to start up. See server output log for more details.>
<06-May-2010 12:07:02 o'clock BST> <Error> <NodeManager> <BEA-300048> <Unable to start the server twpserver1 : Exception while starting server 'twpserver1': java.io.IOException: Server failed to start up. See server output log for more details.>
ManagedServer Log
<06-May-2010 11:54:40 o'clock BST> <Alert> <WebLogicServer> <BEA-000396> <Server shutdown has been requested by weblogic>
06-May-2010 11:54:41 org.quartz.core.QuartzScheduler shutdown
INFO: Scheduler DefaultQuartzScheduler_$_NON_CLUSTERED shutting down.
06-May-2010 11:54:41 org.quartz.core.QuartzScheduler pause
INFO: Scheduler DefaultQuartzScheduler_$_NON_CLUSTERED paused.
06-May-2010 11:54:41 org.quartz.core.QuartzScheduler shutdown
INFO: Scheduler DefaultQuartzScheduler_$_NON_CLUSTERED shutdown complete.
<06-May-2010 11:54:54> <Debug> <NodeManager> <Waiting for the process to die: 19316>
<06-May-2010 11:54:54> <Info> <NodeManager> <Server was shut down normally>
<06-May-2010 11:54:54> <Debug> <NodeManager> <runMonitor returned, setting finished=true and notifying waiters>
NodeManager Log
<06-May-2010 11:54:54> <Info> <twp_domain> <twpserver1> <Server was shut down normally>
<06-May-2010 11:56:21> <Info> <twp_domain> <twpserver1> <Boot identity properties saved to "/appl/weblogic/scripts/servers/twpserver1/data/nodemanager/boot.properties">
<06-May-2010 11:56:21> <Info> <twp_domain> <twpserver1> <Startup configuration properties saved to "/appl/weblogic/scripts/servers/twpserver1/data/nodemanager/startup.properties">
<06-May-2010 11:56:21> <Info> <twp_domain> <twpserver1> <Rotated server output log to "/appl/weblogic/scripts/servers/twpserver1/logs/twpserver1.out00020">
<06-May-2010 11:56:21> <Info> <twp_domain> <twpserver1> <Server error log also redirected to server log>
<06-May-2010 11:56:21> <Info> <twp_domain> <twpserver1> <Starting WebLogic server with command line: /appl/weblogic/oracle/middleware/jrockit_160_05_R27.6.2-20/jre/bin/java -Dweblogic.Name=twpserver1 -Djava.security.policy=/appl/weblogic/oracle/middleware/wlserver_10.3/server/lib/weblogic.policy -Dweblogic.management.server=http://ukirt156:7001 -Djava.library.path="/appl/weblogic/oracle/middleware/jrockit_160_05_R27.6.2-20/jre/lib/i386/jrockit:/appl/weblogic/oracle/middleware/jrockit_160_05_R27.6.2-20/jre/lib/i386:/appl/weblogic/oracle/middleware/jrockit_160_05_R27.6.2-20/jre/../lib/i386::/appl/nsm/CA/UnicenterNSM/lib:/appl/nsm/CA/SharedComponents/JRE/1.4.2_09/lib/i386/client:/appl/nsm/CA/SharedComponents/JRE/1.4.2_09/lib/i386:/appl/nsm/CA/SharedComponents/ccs/dia/dna/lib:/appl/nsm/CA/SharedComponents/ccs/dia/lib:/usr/lib:/opt/CA/CAlib:/appl/nsm/CA/SharedComponents/lib:/appl/nsm/CA/SharedComponents/Csam/SockAdapter/lib:/appl/weblogic/oracle/middleware/wlserver_10.3/server/native/linux/i686:/appl/weblogic/oracle/middleware/wlserver_10.3/server/native/linux/i686/oci920_8" -Djava.class.path=/data/share/package/twp/WEB-INF/lib/ojdbc14.jar:/appl/weblogic/oracle/middleware/wlserver_10.3/server/lib/weblogic_sp.jar:/appl/weblogic/oracle/middleware/wlserver_10.3/server/lib/weblogic.jar -Dweblogic.system.BootIdentityFile=/appl/weblogic/scripts/servers/twpserver1/data/nodemanager/boot.properties -Dweblogic.nodemanager.ServiceEnabled=true -Dweblogic.security.SSL.ignoreHostnameVerification=false -Dweblogic.ReverseDNSAllowed=false -Xmanagement:port=7091,ssl=false,authenticate=false -Xms=1200m -Xmx=1200m -Xverbose:gc,gcpause -Dreflexis.scheduler=true -Dreflexis.server=twpserver1 -Djava.awt.headless=true -Dclient.encoding.override=UTF-8 -Doracle.jdbc.V8Compatible=true weblogic.Server >
<06-May-2010 11:56:21> <Info> <twp_domain> <twpserver1> <Working directory is "/appl/weblogic/scripts">
<06-May-2010 11:56:21> <Info> <twp_domain> <twpserver1> <Rotated server output log to "/appl/weblogic/scripts/servers/twpserver1/logs/twpserver1.out00021">
<06-May-2010 11:56:21> <Info> <twp_domain> <twpserver1> <Server error log also redirected to server log>
<06-May-2010 11:56:21> <Info> <twp_domain> <twpserver1> <Server output log file is "/appl/weblogic/scripts/servers/twpserver1/logs/twpserver1.out">
<06-May-2010 11:56:29> <Info> <twp_domain> <twpserver1> <Server failed during startup so will not be restarted>
<06-May-2010 11:56:29> <Warning> <Exception while starting server 'twpserver1': java.io.IOException: Server failed to start up. See server output log for more details.>
java.io.IOException: Server failed to start up. See server output log for more details.
at weblogic.nodemanager.server.ServerManager.start(ServerManager.java:332)
at weblogic.nodemanager.server.Handler.handleStart(Handler.java:542)
at weblogic.nodemanager.server.Handler.handleCommand(Handler.java:119)
at weblogic.nodemanager.server.Handler.run(Handler.java:66)
at java.lang.Thread.run(Thread.java:619)
Server logs
<06-May-2010 12:06:57> <Info> <NodeManager> <Server output log file is "/appl/weblogic/scripts/servers/twpserver1/logs/twpserver1.out">
[INFO ][memory ] GC mode: Garbage collection optimized for throughput, initial strategy: Generational Parallel Mark & Sweep
[INFO ][memory ] heap size: 1228800K, maximal heap size: 1228800K, nursery size: 614400K
[INFO ][memory ] <s>-<end>: GC <before>K-><after>K (<heap>K), <pause> ms
[INFO ][memory ] <s/start> - start time of collection (seconds since jvm start)
[INFO ][memory ] <end> - end time of collection (seconds since jvm start)
[INFO ][memory ] <before> - memory used by objects before collection (KB)
[INFO ][memory ] <after> - memory used by objects after collection (KB)
[INFO ][memory ] <heap> - size of heap after collection (KB)
[INFO ][memory ] <pause> - total sum of pauses during collection (milliseconds)
[INFO ][memory ] run with -Xverbose:gcpause to see individual pauses
[JRockit] Management server started on port 7091, ssl=false, authenticate=false.
<06-May-2010 12:06:59 o'clock BST> <Info> <WebLogicServer> <BEA-000377> <Starting WebLogic Server with BEA JRockit(R) Version R27.6.2-20_o-108500-1.6.0_05-20090120-1115-linux-ia32 from BEA Systems, Inc.>
<06-May-2010 12:07:00 o'clock BST> <Critical> <Security> <BEA-090518> <Could not decrypt the username attribute value of {AES}xvFgPysVi5b89pYwaAppoqPXQ5wFVW13yoFhzhKmuQo= from the file /appl/weblogic/scripts/servers/twpserver1/data/nodemanager/boot.properties. If you have copied an encrypted attribute from boot.properties from another domain into /appl/weblogic/scripts/servers/twpserver1/data/nodemanager/boot.properties, change the encrypted attribute to its cleartext value then reboot the server. The attribute will be re-encrypted. Otherwise, change all encrypted attributes to their cleartext values, then reboot the server. All encryptable attributes will be re-encrypted. The decryption failed with the exception weblogic.security.internal.encryption.EncryptionServiceException: com.rsa.jsafe.JSAFE_PaddingException: Could not perform unpadding: invalid pad byte..>
<06-May-2010 12:07:00 o'clock BST> <Critical> <Security> <BEA-090518> <Could not decrypt the password attribute value of {AES}WSsjiXk6ppStq4WFajxaXkqCwpcBwaMJni7vk/pqXvk= from the file /appl/weblogic/scripts/servers/twpserver1/data/nodemanager/boot.properties. If you have copied an encrypted attribute from boot.properties from another domain into /appl/weblogic/scripts/servers/twpserver1/data/nodemanager/boot.properties, change the encrypted attribute to its cleartext value then reboot the server. The attribute will be re-encrypted. Otherwise, change all encrypted attributes to their cleartext values, then reboot the server. All encryptable attributes will be re-encrypted. The decryption failed with the exception weblogic.security.internal.encryption.EncryptionServiceException: com.rsa.jsafe.JSAFE_PaddingException: Could not perform unpadding: invalid pad byte..>
Enter username to boot WebLogic server:<06-May-2010 12:07:00 o'clock BST> <Info> <Management> <BEA-141107> <Version: WebLogic Server 10.3.1.0 Thu Jun 11 00:26:56 EDT 2009 1227385 >
<06-May-2010 12:07:01 o'clock BST> <Info> <Management> <BEA-141223> <The server name twpserver1 specified with -Dweblogic.Name does not exist. The configuration includes the following servers {AdminServer}.>
<06-May-2010 12:07:01 o'clock BST> <Critical> <WebLogicServer> <BEA-000362> <Server failed. Reason:
There are 1 nested errors:
weblogic.management.ManagementException: [Management:141223]The server name twpserver1 specified with -Dweblogic.Name does not exist. The configuration includes the following servers {AdminServer}.
at weblogic.management.provider.internal.RuntimeAccessImpl.<init>(RuntimeAccessImpl.java:149)
at weblogic.management.provider.internal.RuntimeAccessService.start(RuntimeAccessService.java:41)
at weblogic.t3.srvr.ServerServicesManager.startService(ServerServicesManager.java:461)
at weblogic.t3.srvr.ServerServicesManager.startInStandbyState(ServerServicesManager.java:166)
at weblogic.t3.srvr.T3Srvr.initializeStandby(T3Srvr.java:749)
at weblogic.t3.srvr.T3Srvr.startup(T3Srvr.java:488)
at weblogic.t3.srvr.T3Srvr.run(T3Srvr.java:446)
at weblogic.Server.main(Server.java:67)
>
<06-May-2010 12:07:01 o'clock BST> <Notice> <WebLogicServer> <BEA-000365> <Server state changed to FAILED>
<06-May-2010 12:07:01 o'clock BST> <Error> <WebLogicServer> <BEA-000383> <A critical service failed. The server will shut itself down>
<06-May-2010 12:07:01 o'clock BST> <Notice> <WebLogicServer> <BEA-000365> <Server state changed to FORCE_SHUTTING_DOWN>
<06-May-2010 12:07:02> <Debug> <NodeManager> <Waiting for the process to die: 19443>
<06-May-2010 12:07:02> <Info> <NodeManager> <Server failed during startup so will not be restarted>
<06-May-2010 12:07:02> <Debug> <NodeManager> <runMonitor returned, setting finished=true and notifying waiters>
Note: if i start the manged servers through WLST scripts its working fine.
[twpuser@ukirt156 /appl/weblogic/scripts]$ java weblogic.WLST
Initializing WebLogic Scripting Tool (WLST) ...
Welcome to WebLogic Server Administration Scripting Shell
Type help() for help on available commands
wls:/offline> nmConnect('weblogic', 'w3bl0g1c', 'ukirt156', '5556', 'twp_domain', '/appl/weblogic/oracle/middleware/user_projects/domains/twp_domain', 'plain')
Connecting to Node Manager ...
Successfully Connected to Node Manager.
wls:/nm/twp_domain> nmStart('twpserver1')
Starting server twpserver1 ...
Successfully started server twpserver1 ...
Please provide the solution, how to solve this issue.
Thanks
SRKIn my question some content was strike.... now again i updated...pls see now...
Server logs
<06-May-2010 12:06:57> <Info> <NodeManager> <Server output log file is "/appl/weblogic/scripts/servers/twpserver1/logs/twpserver1.out">
[INFO ][memory ] GC mode: Garbage collection optimized for throughput, initial strategy: Generational Parallel Mark & Sweep
[INFO ][memory ] heap size: 1228800K, maximal heap size: 1228800K, nursery size: 614400K
[INFO ][memory ] <s>-<end>: GC <before>K-><after>K (<heap>K), <pause> ms
[INFO ][memory ] <s/start> - start time of collection (seconds since jvm start)
[INFO ][memory ] <end> - end time of collection (seconds since jvm start)
[INFO ][memory ] <before> - memory used by objects before collection (KB)
[INFO ][memory ] <after> - memory used by objects after collection (KB)
[INFO ][memory ] <heap> - size of heap after collection (KB)
[INFO ][memory ] <pause> - total sum of pauses during collection (milliseconds)
[INFO ][memory ] run with -Xverbose:gcpause to see individual pauses
[JRockit] Management server started on port 7091, ssl=false, authenticate=false.
<06-May-2010 12:06:59 o'clock BST> <Info> <WebLogicServer> <BEA-000377> <Starting WebLogic Server with BEA JRockit(R) Version R27.6.2-20_o-108500-1.6.0_05-20090120-1115-linux-ia32 from BEA Systems, Inc.>
<06-May-2010 12:07:00 o'clock BST> <Critical> <Security> <BEA-090518> <Could not decrypt the username attribute value of {AES}xvFgPysVi5b89pYwaAppoqPXQ5wFVW13yoFhzhKmuQo= from the file /appl/weblogic/scripts/servers/twpserver1/data/nodemanager/boot.properties. If you have copied an encrypted attribute from boot.properties from another domain into /appl/weblogic/scripts/servers/twpserver1/data/nodemanager/boot.properties, change the encrypted attribute to its cleartext value then reboot the server. The attribute will be re-encrypted. Otherwise, change all encrypted attributes to their cleartext values, then reboot the server. All encryptable attributes will be re-encrypted. The decryption failed with the exception weblogic.security.internal.encryption.EncryptionServiceException: com.rsa.jsafe.JSAFE_PaddingException: Could not perform unpadding: invalid pad byte..>
<06-May-2010 12:07:00 o'clock BST> <Critical> <Security> <BEA-090518> <Could not decrypt the password attribute value of {AES}WSsjiXk6ppStq4WFajxaXkqCwpcBwaMJni7vk/pqXvk= from the file /appl/weblogic/scripts/servers/twpserver1/data/nodemanager/boot.properties. If you have copied an encrypted attribute from boot.properties from another domain into /appl/weblogic/scripts/servers/twpserver1/data/nodemanager/boot.properties, change the encrypted attribute to its cleartext value then reboot the server. The attribute will be re-encrypted. Otherwise, change all encrypted attributes to their cleartext values, then reboot the server. All encryptable attributes will be re-encrypted. The decryption failed with the exception weblogic.security.internal.encryption.EncryptionServiceException: com.rsa.jsafe.JSAFE_PaddingException: Could not perform unpadding: invalid pad byte..>
Enter username to boot WebLogic server:<06-May-2010 12:07:00 o'clock BST> <Info> <Management> <BEA-141107> <Version: WebLogic Server 10.3.1.0 Thu Jun 11 00:26:56 EDT 2009 1227385 >
<06-May-2010 12:07:01 o'clock BST> <Info> <Management> <BEA-141223> <The server name twpserver1 specified with -Dweblogic.Name does not exist. The configuration includes the following servers {AdminServer}.>
<06-May-2010 12:07:01 o'clock BST> <Critical> <WebLogicServer> <BEA-000362> <Server failed. Reason:
There are 1 nested errors:
weblogic.management.ManagementException: [Management:141223]The server name twpserver1 specified with -Dweblogic.Name does not exist. The configuration includes the following servers {AdminServer}.
at weblogic.management.provider.internal.RuntimeAccessImpl.<init>(RuntimeAccessImpl.java:149)
at weblogic.management.provider.internal.RuntimeAccessService.start(RuntimeAccessService.java:41)
at weblogic.t3.srvr.ServerServicesManager.startService(ServerServicesManager.java:461)
at weblogic.t3.srvr.ServerServicesManager.startInStandbyState(ServerServicesManager.java:166)
at weblogic.t3.srvr.T3Srvr.initializeStandby(T3Srvr.java:749)
at weblogic.t3.srvr.T3Srvr.startup(T3Srvr.java:488)
at weblogic.t3.srvr.T3Srvr.run(T3Srvr.java:446)
at weblogic.Server.main(Server.java:67)
>
<06-May-2010 12:07:01 o'clock BST> <Notice> <WebLogicServer> <BEA-000365> <Server state changed to FAILED>
<06-May-2010 12:07:01 o'clock BST> <Error> <WebLogicServer> <BEA-000383> <A critical service failed. The server will shut itself down>
<06-May-2010 12:07:01 o'clock BST> <Notice> <WebLogicServer> <BEA-000365> <Server state changed to FORCE_SHUTTING_DOWN>
<06-May-2010 12:07:02> <Debug> <NodeManager> <Waiting for the process to die: 19443>
<06-May-2010 12:07:02> <Info> <NodeManager> <Server failed during startup so will not be restarted>
<06-May-2010 12:07:02> <Debug> <NodeManager> <runMonitor returned, setting finished=true and notifying waiters>
Note: if i start the manged servers through WLST scripts its working fine.
[twpuser@ukirt156 /appl/weblogic/scripts]$ java weblogic.WLST
Initializing WebLogic Scripting Tool (WLST) ...
Welcome to WebLogic Server Administration Scripting Shell
Type help() for help on available commands
wls:/offline> nmConnect('weblogic', 'w3bl0g1c', 'ukirt156', '5556', 'twp_domain', '/appl/weblogic/oracle/middleware/user_projects/domains/twp_domain', 'plain')
Connecting to Node Manager ...
Successfully Connected to Node Manager.
wls:/nm/twp_domain> nmStart('twpserver1')
Starting server twpserver1 ...
Successfully started server twpserver1 ...
Please provide the solution, how to solve this issue.
Thanks
SRK
Maybe you are looking for
-
How do you change the size of a photo file?
I volunteer for an animal rescue organization, and I need to post some digital photos I took of some kittens I am fostering on petfinder.org as soon as possible. The photos I have are too large for the website to handle - I need to reduce the file si
-
64-bit, 32-bit Porting - Problem with file locking
Hi, OS: Solaris 8 I am trying to port the existing 32-bit code to 64-bit. I am facing the following problem. The executable works fine with 32-bit compilation, but fails with the 64-bit compilation. I am trying to lock a file, but it is failing with
-
JAVA_HOME is not defined correctly
Hi everyone. I'm trying to run a java program I made for school but I keep getting the message in the debugger console: [ Session started at 2010-09-07 01:52:54 -0400. ] Error: JAVA_HOME is not defined correctly. We cannot execute /System/Library/Fra
-
IE to Firefox Bookmarks using Nokia PC Suite
Hi, May be someone can help me out. Is there anyway by using Nokia PC Suite's mobile bookmarks, i can transfer my Internet explorer saved bookmarks to Firefox bookmarks... IE bookmarks to Nokia Device Nokia Device to Firefox Is it possible?
-
Jdeveloper 10.1.3.1 how to add Oracle App server 10g 10.1.3
In our company we have installed IAS 10.1.3 on server which ip si: 10.1.5.230.. the home path is: /oracle/ias10g/... I would like to add application server in Jdeveloper but I allways get the error: Error getting OC4J Process for: opmn-home+oc4j-10.1