Redirect requests to access internet abnormal
Good morning
below a small question I want to propose you:
I manage a distributed within local network and users connecting to the Internet only through a proxy.
What should I do to be able to carry all abnormal requests (no proxy) on a server that will always be on the same LAN, but network different. Currently I am using OSPF as a routing protocol and do not have default-rout outward.
I would like to avoid a default-gateway
Stefano
Are you testing from a system in the IP-range from 192.168.0.128-254? Then your Object-definition used for nat is wrong:
object network INSIDE_NET
subnet 192.168.0.0 255.255.255.128
should be:
object network INSIDE_NET
subnet 192.168.0.0 255.255.255.0
Don't stop after you've improved your network! Improve the world by lending money to the working poor:
http://www.kiva.org/invitedby/karsteni
Similar Messages
-
My IPad connects with my hotel wifi, but does not indicate that it is a secure wifi, even though it requires a password to access - no lock symbol appears against the wifi network, hence no password request, hence no internet access - help. My collegue who also has an Ipad can access the same wifi with ease, so it must be something to do with the settings on my machine, although checking the two machines, there appears to be no difference in the settings.
My experience with hotel wifi is that it's an open, and unsecured, connection, but unless you agree to their terms on a launch page, you can't go any further or connect. Sometimes I need to force safari to come up and even make it go to a page, to trigger the auto load of the 'agree to our terms' page.
Unless your machine is work provided so maybe could be blocked from unsecured net access? -
Help needed to access internet while roaming
Hi, I m new to this community and do not know properly how to get support. I have I pad mini with retina display, WiFi & Cellular, 32 GB, OS: iOS 7.1.2. To use internet I have taken Vodafone SIM (UP, West, India) which is a handmade nano SIM. I am able to use internet facility when present in home circle. However, when I visit to other states I can not access internet (even after the setting change as a roaming). Whenever I open the browser, message comes on screen "Could not activate cellular data network" or "You are not subscribed to a cellular network service". In this connection I contacted ISP (Vodafone), but they say there is no problem with ISP and suggest me to contact Apple. I made contact with apple too. They made all the heat and trial with the setting but the result was the same. Finally they say this problem could be because of hand cut nano SIM and suggested me to get factory cut nano SIM. I am still having hand cut SIM. I request all of you to help me in this regard so that I could use internet while traveling.
Thank you
Arun VermaGet a factory cut nano sim as Vodaphone suggested. The handout sim seems
to have a problem. Is there some reason you don't want to follow the suggestion
you have been given? -
Request online access to your existing individual account
Hi,
Can anyone please give the steps to create registration process of - 'Request online access to your existing individual account'
What is the information required for the registration process, as i want to raise Service Request using without Product (using the SR# or Order No)
But am not able to create the Account / Register the Account giving the following error: "The specified Order Number is not recognized by the system "
Can anyone give the steps to raise Service Request without Product (using either SR# or Order No)
ThanksThanks for your reply.
In the existing environment there are two AD sites, Two AD and Two exchange server 2010 (ALL roles) are in 1st AD sites. And another one AD and Two exchange server 2010 (ALL roles) 2nd AD sites.
user cannot facing any problem to login using owa and outlook on 1st AD sites. but user when trying to login owa/outlook on 2nd sites, they facing problem.
The Error "A server configuration change is temporarily preventing access to your account. Please close all Internet Explorer windows and try again in a few minutes. If the problem continues, contact your helpdesk"
Need suggestion regarding this issue. please suggest in details how to resolve this issue.
If you need more information i will provide you. Please suggest. I'm waiting for the reply.
Thanks.. -
Malformed HTTP request in access.log
Hi,
we're running a quite standard web application on a weblogic server 9.1, clients are using Internet Explorer 6, and lately, I checked the access.log, and sometimes, logged HTTP requests look malformed, for example:
access.log00575:xxx.xxx.xxx.xxx - - [25/Aug/2006:13:47:01 +0200] "ntent-Type: application/x-www-form-urlencoded HTTP/0.9" 501 990
access.log00568:xxx.xxx.xxx.xxx - - [25/Aug/2006:10:32:30 +0200] "&GET /img/console/entete.gif HTTP/1.1" 501 990
access.log00639:xxx.xxx.xxx.xxx - - [27/Nov/2006:12:38:00 +0100] "&POST /ajax/heartbeat HTTP/1.1" 501 80
access.log00460:xxx.xxx.xxx.xxx - - [21/Aug/2006:16:51:01 +0200] "OST /ajax/daily_commission HTTP/1.1" 501 78
I once was successful in reproducing the problem, and during this test, I was sniffing the network, and apparently, the sent HTTP requests looked fine, whereas it appeared as a corrupted request in access.log.
Have anyone seen something like this before ?
Thanks.I wish that were true. I've disconnected Server Admin from the server and then quit the application. The log entries are still comin'.
localhost - - [15/Jul/2009:13:05:11 -0500] "GET /server-status?auto HTTP/1.1" 200 2222 "-" "servermgrd (unknown version) CFNetwork/438.12 Darwin/9.7.0 (i386) (MacPro4%2C1)"
localhost - - [15/Jul/2009:13:05:11 -0500] "GET /server-status?auto HTTP/1.1" 200 2222 "-" "servermgrd (unknown version) CFNetwork/438.12 Darwin/9.7.0 (i386) (MacPro4%2C1)"
localhost - - [15/Jul/2009:13:06:11 -0500] "GET /server-status?auto HTTP/1.1" 200 2223 "-" "servermgrd (unknown version) CFNetwork/438.12 Darwin/9.7.0 (i386) (MacPro4%2C1)"
localhost - - [15/Jul/2009:13:06:11 -0500] "GET /server-status?auto HTTP/1.1" 200 2223 "-" "servermgrd (unknown version) CFNetwork/438.12 Darwin/9.7.0 (i386) (MacPro4%2C1)"
Thanks for trying.
B. Bodger -
ASA 5505 Anyconnect VPN Users can't access Internet
Vpn user cannot access the internet but able to ping the lan network (192.168.1.0).. it seem like im missing a lan or nat rule.. Possibly allowing the vpn subnet 192.168.2.0 /24 to pass through to the internet. Im looking to accomplish this without split tunneling.. Thanks
on 8.2.5 version or lower: Let say your inside hosts are accessing Internet by using dynamic nat index "1" and now you can use the same nat index "1" allow your vpn-pool range to be part of the same dynamic-nat index "1" to access the Internet. Note I am natting source interface is be outside for vpn-client users because they (vpn-users) are physically coming off the outside interface.
nat (outside) 1 192.168.2.0 255.255.255.0
on 8.3 version or greater:
object network vpn-user-subnet
subnet 192.168.2.0 255.255.255.0
nat (outside,outside) dynamic interface
Hope this helps.
Thanks
Rizwan Rafeek -
VPN Client cannot access Internet
I am currently using PIX 501 and VPN 3000. Everything is running fine except that VPN Client cannot access internet after they logged in via Cisco System VPN CLient. I can't any solution to this problem and is really lost. This is a very important task assign to me.
Hope someone can help me asap.
Thanks YouYou need to enable split tunneling. This link is for VPN client to router. The same equivalent config may apply to a PIX as well.
http://www.cisco.com/application/pdf/en/us/guest/products/ps6659/c1650/cdccont_0900aecd80313bf8.pdf -
Cannot access internet after upgrading to IOS 6.1.2 on iphone 4
cannot access internet after upgrading to IOS 6.1.2 on iphone 4.
ok here is the issue.
After i upgraded the IOS to IOS 6.1.2 I'm not able to use mobile internet as i have a data sim card.
As the settings provided by the service provider are not compatible with IOS 6.1.2 and the service provider cannot do anything about it, as it's something that has to be ressolved by apple. -
I have a MacBook Pro and I need to be able to access Internet Explorer in order to login to my remote work server (Microsoft server) and Online Business Banking system (Bank of America Cash Pro). How do I do it if Internet Explorer is not supported on Macs? Is there another option? Please help.
I also feel like such a moron as I am really new to Apple computers and don't even know what operating system I am using. The below is what I have. Sorry to all that are well beyond me in the Mac world. Have been a windows user for my whole life and haven't quite figured out where to find everything I need on my new laptop yet. Thanks!
With the following configuration:
PROCESSOR 065-0154 2.7GHz Dual-core Intel Core i7
MEMORY 065-0156 8GB 1333MHz DDR3 SDRAM - 2x4GB
HARD DRIVE 065-0159 750GB Serial ATA Drive @ 5400
OPTICAL DRIVE 065-0161 8x Double-Layer SuperDrive
DVI Adapter 065-0162 None
VGA Adapter 065-0164 None
REMOTE 065-0166 None
Apple Software - iWork 065-7672 No iWork preinstalled
Apple Software - Final Cut Exp 065-7682 Final Cut Express preinstalled
Apple Software - Aperture 065-0338 Aperture preinstalled
Apple Software - Logic Express 065-7675 No Logic Express Preinstalled
Apple Software - Filemaker 065-8307 No FileMaker Preinstalled
Apple Software - MS Office 065-0278 MSO-HOME & BUSINESS EDITION
KEYBOARD AND DOCUMENTATION 065-0172 Keyboard/Users Guide
COUNTRY KIT 065-0175 Country KitIf you are New to Mac... you may also find these links of Value
Mac 101
http://www.apple.com/support/mac101/
http://www.apple.com/support/switch101/ Switching from PC
MBP Support
http://www.apple.com/support/macbookpro
Cheers, -
Will I be able to use Google translate app in France? Can I just access Internet abroad? Any directives?
You can check if the app does require internet by going into airplane mode or turning off WiFi and re launching the app. If it does not work, google "offline translater app for iOS".
-
How to view only specific authentication requests in access tracker
Requirement:
How to view only "Healthy/Unhealthy" requests from a specific Webauth service.
Solution:
If we have more than one Webauth service (based on conditions such as Device type or NAS IP or posture status etc) and we need only Healthy/Unhealthy requests from a specific service in access tracker for administrative use; we need to create a custom Data filter.
Configuration:
Below are the steps to achieve the same:
Navigate to Monitoring > Data filters > Click on "Add" option to create a new filter
Specify a name on the "Filter" tab
Select the "Rule" tab to specify the unique condition (to filter the access tracker request)
Create the below conditions:
( Commonystem-Posture-Token CONTAINS Healthy )
- AND - ( Commonervice CONTAINS Windows-health-check )
5. Save this filter
Now we can use this Data filter in access tracker to only view Healthy Webauth requests from "Windows-health-check" service.
Verification
So now we can verify the output by looking at the access tracker.
At present we can see "Eight" webauth requests in access tracker. Now we want to see only Healthy web-auth request from "Windows-health-check" service.
We change the data filter to the Custom "healthy-filter" and now only see one request in access tracker as per our requirement.Hi Vignesh,
ANy luck on this ? I am trying the almost same thing...and stuck at same point.
Please let us know if you have any more information. -
Hi All,
we are calling sharepoint webservice from our web application but we are getting below error while calling webservice.
Server was unable to process request. ---> Access is denied. (Exception from HRESULT: 0x80070005 (E_ACCESSDENIED))
Our code is as below.
We used below 2 options but we got same error for both scenario,
1)
ListService.Lists objLists = new ListService.Lists();
NetworkCredential objNetworkCredential = new NetworkCredential("username", "password");
objLists.Credentials = objNetworkCredential;
System.Xml.XmlNode objXmlNode = objLists.GetListItems("Tasks", null, null, null, null, null, null);
2) ListService.Lists objLists = new ListService.Lists();
objLists.Proxy = new WebProxy("proxyaddress",true);
NetworkCredential objNetworkCredential = new NetworkCredential("username", "password");
objLists.Credentials = objNetworkCredential;
System.Xml.XmlNode objXmlNode = objLists.GetListItems("Tasks", null, null, null, null, null, null);
Please help me what is the problem while calling this service.
Thanks in advance.
Regards,
Kaivan ShahHi ,
Here is a similar case ,you can have a look at this .
Access is denied. (Exception from HRESULT: 0x80070005 (E_ACCESSDENIED)) -Accessing the sharepoint site:
http://social.msdn.microsoft.com/Forums/en-NZ/sharepointworkflow/thread/5eab2116-7d7c-4bf3-bfa1-48bd8992dded
Thanks,
Entan Ming -
Dear all readers of this writing,
I truly want to get help or advice of solving my blue screen problem called "bad_pool_caller".
Even, I nicknamed myself as "bad_pool_caller of death" because this caused several painful experiences while playing online games. Furthermore I am just a beginner about computers, so even this small problem makes me crazy.
Let me introduce my problem and what I have done to solve this problem.
-Symptoms
this bad_pool_caller problem does not occur in offline. I found that none of problem occurs even while playing single player games over 7 hours like Far cry3 or bioshock infinite.
Only while accessing Internet, this problem occurs.
Especially, while playing any youtube videos
even also other sort of video players, almost within 20 seconds, my computer shut down by bad_pool_caller error.
and video's buffering is extremely slow.
This is not just a Internet access problem I think, because I have another my own laptop and when I play youtube video of my laptop, it plays well.
Also, when I enter a posting linked with bgm files, and try to install and play online games like starcraft 2, same things happens.
(Although the frequency is lower than that of bad poor caller, Driver IRQL Less or equal error
pops up while playing online games.
During surfing Internet without these, bad pool caller error does not happen, so I think these three things(youtube video, listening bgm, online games) have much to do with my error.
-What I have done
I tried to solve by myself after I found this link.
http://social.technet.microsoft.com/Forums/windows/en-US/e5e06b4e-6ed0-4eab-80ab-56c334f924be/windows-8-blue-screen-of-death-bsod-badpoolcaller?forum=w8itproperf
I was very happy when I found this because the situation of the writer in upper link is almost same with that of mine.
As the answer written, I format my C drive(Toshiba) and install windows 8.1 full version completely and upgraded graphic drive(GTX 760) and upgraded latetest windows 8.1 beta version upgrade of Wireless lan card drive(Netgear N900).
However, you know, still this error occurs...
-Guess the cause
I know that most bad pool caller problem arise from Hard drive and memory corruption.
But, my desktop PC is bought only a month ago and I bought quite a good SSD and HDD and Ram for playing high quality games.
So I don't think the main cause is my SSD or HDD. My graphic card is also a new one.
I suspect the cause is my network adapter, wireless lan card (USB) because this connects Internet access between my desktop PC and Louter.
I am living in University dorm and using louter using with other students together.
For getting Internet access of my desktop PC, I've bought wireless lan card (Netgear N 900) and I think this lan card causes problem such as windows 8.1 compatible
But I fully upgraded and updated lan card driver and reinstalled several times and this N900 is not bad lan card so I don't determine this is the real cause.
Here is link of my minidump record files.
https://onedrive.live.com/#cid=CF99CE81DCA9027A&id=CF99CE81DCA9027A%21943
(most error is about bad_pool_caller, but one is about Driver_IRQL_Less or Equal)
and sorry for my poor English writing skills because I am international student arrived US only 3 months. If you have some things that cannot understand of my writing, just ask me again.
Thanks for your help in advance.2: kd> lmvm NETIO
start end module name
fffff800`00800000 fffff800`00879000 NETIO (private pdb symbols)
Loaded symbol image file: NETIO.SYS
Mapped memory image file: Image path: \SystemRoot\system32\drivers\NETIO.SYS
Image name: NETIO.SYS
Timestamp: Thu Aug 22 19:37:08 2013 (5215F7E4)
CheckSum: 0007A220
ImageSize: 00079000
File version: 6.3.9600.16384
Product version: 6.3.9600.16384
File flags: 0 (Mask 3F)
File OS: 40004 NT Win32
File type: 3.6 Driver
File date: 00000000.00000000
Translations: 0409.04b0
CompanyName: Microsoft Corporation
ProductName: Microsoft® Windows® Operating System
InternalName: netio.sys
OriginalFilename: netio.sys
ProductVersion: 6.3.9600.16384
FileVersion: 6.3.9600.16384 (winblue_rtm.130821-1623)
FileDescription: Network I/O Subsystem
LegalCopyright: © Microsoft Corporation. All rights reserved.
Hi,
As you said,you have updated your NIC driver.
Did this issue happend when you used the wired LAN?
I think this is related to wireless driver.
I suggest that you try other wirless card to test this issue.
Regards,
Kelvin Xu
TechNet Community Support -
I can no longer access internet on my iphone.
When I try to access internet on safari or any apps requiring internet the apple icon spins and says loading but never loads. I have tried reseting phone to factory setting but still can not access internet. I re-downloaded apps to phone using itunes sync, and kids can play apps fine, but not if internet access required. Safari still does same also.
What about wifi?
If you're attemtping on 3G, talk to your provider. There's not much else available for troubleshooting. -
Just bought new Ipod Touch 5g. I found out it can't access Internet in home network. not really cannot access, but very slow to open any web page, App Store failed to access, etc. But, OK with other Wifi (office & starbucks). Others existing iOS devices (Iphone4 & Ipad2) have no problem like this. I'm using Linksys E4200 router at home. anyone has any idea why?
Try:
- Reset the iPod. Nothing will be lost
Reset iPod touch: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Power off and then back on the router
- Reset network settings: Settings>GeneralReset>Reset Network Settings
- iOS: Troubleshooting Wi-Fi networks and connections
- iOS: Recommended settings for Wi-Fi routers and access points
- Restore from backup
- Restore to factory settings/new iPod.
- Make an appointment at the Genius Bar of an Apple store.
Apple Retail Store - Genius Bar
Maybe you are looking for
-
I had been using my unlocked iPhone4s in Australia for few months and it worked with every carriers. Now I'm in Taiwan and I cannot use it. What should I do?
-
Upgading Final Cut Express to Final Cut Pro
I bought Final Cut Express HD 3.5 yesterday. Is it possible to upgrade to Final Cut Pro. Apple store sales guy said I can. But I dont see this possibility in the apple website. Mac powerbook G4 12" Mac OS X (10.4.8)
-
A/r Invoice- Service Module
Hi, Iam unable to raise an Invoice from the Service Module. All the row fields appear disabled. Any answers
-
Color PS1 in runlevel 3 -how? [SOLVED\]
I have found this in the wiki to be pleasing to the eye: http://wiki.archlinux.org/index.php/Pos - p_your_PS1 But it only works in X terminal emulators, not in the runlevel 3 console. I do have colorized output from pacman and man pages in runlevel 3
-
Am requesting help, can't seem to get it to install or run. I have been able to run through the install program "successfully", but can't run the 'console' or start the application server. pls help could the problem be related to my platform - if so