Redirect to Pages library after creating item in pages library folder!

Hi All,
I'm facing one problem while creating item in publishing pages library.
Whenever I create an item inside the folder, after creation of item SharePoint redirect me to root level of the library. Its happening in pages library only.
Does any one face this issue or it's a know SharePoint issue or is there any workaround?
Thanks
Shubham

Hi Shubham,
I did a test, however I could not reproduce your issue.
In my testing, I created a folder in the Pages library, then created a page in the folder. After creation, it went to the folder level, not the top level of the library.
Please check whether you installed some updates for your SharePoint 2010.
For narrowing down the scope of this issue, please verify the followings:
Please create a new site at the same site collection, then test again, compare the result.
Please create a new site collection, test again, compare the result.
Best Regards,
Wendy
Wendy Li
TechNet Community Support

Similar Messages

  • Pivot Table, "Insert Page Break After Each Item" Setting Only Works for the First Item Change

    I have a flattened pivot table generated from Powerpivot and I would like to insert a page break for each change in the row item.
    When I use the pivot table Field Settings>Insert Page Break After Each Item, Excel inserts the first page break then returns to normal pagination for the rest of the output.
    Is there another setting required to maintain the page breaks after the item change?
    Thanks.

    We are experiencing the same problem. Did you ever find a solution?

  • How do i keep the original manual sort of my photos that i had in previous library after a rebuild in iphoto library manager?

    how do i keep the original manual sort of my photos that i had in previous library after a rebuild in iphoto library manager? and keep the events in the same order with blank events also

    Not sure you can.
    Library Manager creates an entirely new library. It will then copy (or try to) your photos and all the associated metadata and versions to this new Library, and arrange it as close as it can to what you had in the damaged Library. It does this based on information it finds in the iPhoto sharing mechanism - but that means that things not shared won't be there, so no slideshows, books or calendars, for instance - but it should get all your events, albums and keywords, faces and places back.

  • After creating a new photo library....

    Just got my MacBook last week, everything was fine until I tried to learn more.
    I have created a new iphoto library, creating some additional login names, do some settings to expose/spaces....
    Now I have faced some problems:
    1. RAW file could no longer be edited
    2. RAW file opened appears very blur
    3. RAW file opened cannot be seen after flipping forward and backward to other phots (appear as white screen in window format, appears as black screen in full screen mode)
    I am wondering whether could this be related to some settings that I have set unintentionally?
    Additional questions:
    - how do we remove/delete additional iphoto library?
    - how to move photos from 1 library to another?
    please help....

    TD
    I was exploring and trying to create a new library, I first drag the original 'photo library' to 'document' folder in the Hard Disk and rename it, then create a new photo library and drag back my 1st library into iphoto. when restarting iphoto, hold down the option key and select to open in the 1st library (the one renamed)
    other than that didnt do any thing else.
    is there any mistake in my above steps?
    When you mentioned 'elements', do you mean the photo inside?
    Called up applecare, was guided:
    1. drag and put all the very first photos imported (inside 'Data' folder) into Desktop
    2. thrash all the iphoto library
    3. go library>preferences and trash com.apple.iPhoto.plist
    4. create back iphoto library and drag back all the photos from the Desktop
    the major problem here is that all photos now becoming JPG (guess all RAW converted to JPG in the Data folder) and all <50KB.
    now I have loss the RAW file and dont think the quality of JPG will be good when developed...
    I still yet to try again RAW file editing in the new library created. will update after I got home later.

  • Exception after creating a new page in a new project

    Hello all,
    I have started a new module for which i have created a new project and al.
    I created my first page of the new project and i found an exception which i am not able to solve.I tested with a page having only StyledText but that also is not opening.Kindly help
    Exception:
    oracle.apps.fnd.framework.OAException: Could not load application module xx.xx.xxx.xxx.server.abcAM'.
         at oracle.apps.fnd.framework.webui.OAJSPApplicationRegistry.registerApplicationModule(OAJSPApplicationRegistry.java:279)
         at oracle.apps.fnd.framework.webui.OAJSPApplicationRegistry.registerApplicationModule(OAJSPApplicationRegistry.java:78)
         at oracle.apps.fnd.framework.webui.OAPageBean.preparePage(OAPageBean.java:1166)
         at oracle.apps.fnd.framework.webui.OAPageBean.preparePage(OAPageBean.java:497)
         at oracle.apps.fnd.framework.webui.OAPageBean.preparePage(OAPageBean.java:418)
         at OA.jspService(OA.jsp:40)
         at com.orionserver.http.OrionHttpJspPage.service(OrionHttpJspPage.java:56)
         at oracle.jsp.runtimev2.JspPageTable.service(JspPageTable.java:317)
         at oracle.jsp.runtimev2.JspServlet.internalService(JspServlet.java:465)
         at oracle.jsp.runtimev2.JspServlet.service(JspServlet.java:379)
         at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
         at com.evermind.server.http.ServletRequestDispatcher.invoke(ServletRequestDispatcher.java:727)
         at com.evermind.server.http.ServletRequestDispatcher.forwardInternal(ServletRequestDispatcher.java:306)
         at com.evermind.server.http.HttpRequestHandler.processRequest(HttpRequestHandler.java:767)
         at com.evermind.server.http.HttpRequestHandler.run(HttpRequestHandler.java:259)
         at com.evermind.server.http.HttpRequestHandler.run(HttpRequestHandler.java:106)
         at EDU.oswego.cs.dl.util.concurrent.PooledExecutor$Worker.run(PooledExecutor.java:803)
         at java.lang.Thread.run(Thread.java:534)
    ## Detail 0 ##
    java.lang.ClassCastException
         at oracle.apps.fnd.framework.webui.OAJSPApplicationRegistry.registerApplicationModule(OAJSPApplicationRegistry.java:208)
         at oracle.apps.fnd.framework.webui.OAJSPApplicationRegistry.registerApplicationModule(OAJSPApplicationRegistry.java:78)
         at oracle.apps.fnd.framework.webui.OAPageBean.preparePage(OAPageBean.java:1166)
         at oracle.apps.fnd.framework.webui.OAPageBean.preparePage(OAPageBean.java:497)
         at oracle.apps.fnd.framework.webui.OAPageBean.preparePage(OAPageBean.java:418)
         at OA.jspService(OA.jsp:40)
         at com.orionserver.http.OrionHttpJspPage.service(OrionHttpJspPage.java:56)
         at oracle.jsp.runtimev2.JspPageTable.service(JspPageTable.java:317)
         at oracle.jsp.runtimev2.JspServlet.internalService(JspServlet.java:465)
         at oracle.jsp.runtimev2.JspServlet.service(JspServlet.java:379)
         at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
         at com.evermind.server.http.ServletRequestDispatcher.invoke(ServletRequestDispatcher.java:727)
         at com.evermind.server.http.ServletRequestDispatcher.forwardInternal(ServletRequestDispatcher.java:306)
         at com.evermind.server.http.HttpRequestHandler.processRequest(HttpRequestHandler.java:767)
         at com.evermind.server.http.HttpRequestHandler.run(HttpRequestHandler.java:259)
         at com.evermind.server.http.HttpRequestHandler.run(HttpRequestHandler.java:106)
         at EDU.oswego.cs.dl.util.concurrent.PooledExecutor$Worker.run(PooledExecutor.java:803)
         at java.lang.Thread.run(Thread.java:534)

    Hi
    thanks for your response.The thing id when i am creating everything new i.e. page ,EO,Vo,AM then it is not working but if i associate it with oracle default AM ---> oracle.apps.fnd.framework.server.OAApplicationModule then it is working.
    If i create it in my previous projects with new EO,VO,AM then also it is working ....
    Thats y it is not a settings problem..But still i am not getting the cause of the problem.
    Please help

  • Photo Page, Add albums, creates new "Album Pages", style?

    Working with iWeb09, I created a single photo gallery page, then I drop in an album from iPhoto, looks and works great. I edit the resulting page and it looks great, but when I add another iPhoto album, it creates a new photo page automatically. How can I get that page to look the same as the previous pages? It seems to default to the template default.

    ADDENDUM: This might work but may be more effort than just editing the layout.
    1 - select the page that the album creates and duplicate it (select and type Command+D) - Page A
    2 - add the new album.
    3 - go to the new album's page - Page B, select and copy the thumbnail box.
    4 - go to Page-A, click on the thumbnail box, select all of the photos in it and delete.
    5 - Do a paste to bring in the new photos from B.
    6 - delete page B and rename A to what B was named.
    7 - change any text boxes as needed.
    8 - select the image for the second album, go to the Inspector/Link/Hyperlink and link it to page A via the Link to one of my pages menu.
    Sounds like a lot but may be quicker than modifying the layout each time. Or not.

  • I can not see my husbands Itunes library after he has shared his library

    My husband has shared his Itunes Library, but I can not see it on my computer. Any suggestions?

    So what sync settings do you currently have enabled from under the iPod's Summary and Music tabs?  Any error messages when you try to sync?
    To be sure, reset sync warnings. To do this, right->click the iPod under Devices and choose Reset Warnings. Then resync your iPod.
    B-rock

  • Create Item button on personalization page.

    Hi,
    I have Personailze Self Service Defn profile option enabled at site level. (User also set to YES).
    However I don't see create item button on many pages personalization screen, (like HomePage, or some other page).
    And on functional administrator responsibility's any page (like profile page in core, create Item is there).
    Its been checked on other instances that the create item button appears there for the same pages in problem.
    What can be the reason?
    Abdul Wahid

    Hi,
    Talked to Anil enabled "FND: Personalization Seeding Mode / FND_PERSONALIZATION_SEEDING_MODE" personalization link. It worked (even though the documentation says that its only for oracle's internal usage).
    Also related diagnostic story got via other cooleague with deeper cause of the problem and solution.
    Need to set system profiles to change old personalizations - expected?
    Abdul Wahid

  • Creating new publishing page and viewing Properties throwing exeption

    Hi,
    I am creating new OOB publishing page using “Article Page” layout.
    Please note Versioning and approval enabled on this “Pages” library. Also there is no workflow attached to this.
    Steps I am following:
    Goto Pages library.
    Create new Article page from add new item
    After that select that item and click on “View Properties” button from top ribbon. please not I have not checkedin page yet. It’s throwing exception as below.
     System.ArgumentException: Item does not exist. It may have been deleted by another user.   
    at Microsoft.SharePoint.SPList.GetItemById(String strId, Int32 id, String strRootFolder, Boolean cacheRowsetAndId, String strViewFields, Boolean bDatesInUtc, Boolean bExpandQuery)    
    at Microsoft.SharePoint.SPList.GetItemById(String strId, Int32 id, String strRootFolder, Boolean cacheRowsetAndId, String strViewFields, Boolean bDatesInUtc)    
    at Microsoft.SharePoint.Publishing.CachedListItem.FetchAllFields()    
    at Microsoft.SharePoint.Publishing.CachedListItem.GetFieldContents(String index, Boolean refetchIfFieldNotFound)    
    at Microsoft.SharePoint.Publishing.WebControls.SummaryLinkFieldControl.CreateChildControls()    
    at System.Web.UI.Control.EnsureChildControls()    
    at Microsoft.SharePoint.We...              
    896a6c9c-e172-e000-b2f5-76c261783eb4
    however same steps followed in our DEV environment and seems ok. only this issue with our another environments.
    Also once I check in page and then goto "View Properties" then it's working.
    Thanks in advance! Br,KS

    Do you have any workflow on the publishing library?  The error you mention I've seen sometimes when uses have created workflows that reference custom columns which are then deleted or removed.
    Additionally, if a user has insufficient permissions to start an attached workflow, this error can also be encountered.
    Steven Andrews
    SharePoint Business Analyst: LiveNation Entertainment
    Blog: baron72.wordpress.com
    Twitter: Follow @backpackerd00d
    My Wiki Articles:
    CodePlex Corner Series
    Please remember to mark your question as "answered" if this solves (or helps) your problem.

  • Newly created item through personalization not visible

    Hi All,
    I have added on new item , in a page,
    Howerver when I clicked apply on that item , once I define the required properties of the item.
    I am getting this error
    "Attachment item "%ITEM" has been created successfully, however, it does not have an Entity Map associated with it. To avoid a runtime error, please either create an Entity Map for this attachment item, or delete attachment item "%ITEM"."
    I am not able to locate that item , anywhere * either in personalzied page nor in application page

    I have gone to personalize page -> selected LOVRN -> create item ->
    level - Site
    Item Type - MessageLOVInput
    Prompt - some custom prompt
    Id - some custom id
    External LOV- given exisitng seeded path for LOV with region name in the last
    apply .
    Then the error appeared as
    Attachment item "%ITEM" has been created successfully, however, it does not have an Entity Map associated with it. To avoid a runtime error, please either create an Entity Map for this attachment item, or delete attachment item "%ITEM". appeared
    After the above steps complete. I have again gone to personalization ->complete view . But I am not able to locate the item created in above mentioned steps.
    One thing to note, I have tried creating new item , however everytime I am getting the above error after clicking on apply. In one occasion I have given incomplete path in the external LOV field mentioned above.(i.e. I forgot to mention the region Name )
    Please help....

  • "Create Book from Page" Question

    In the Table of Contents Pod, I can right-click on a topic/page and select "Create Book from Page." When I do so, the resulting "book" is not selectable. I have to bring in the page again and place it below the "Book" title. This can't be right! What am I doing wrong, or what should I be doing?

    Here's what I found as to how to associate a topic with the book:
    You’ll have to create a topic to associate with that book. Here’s one way to do that:
    Right click the book icon in the Table of Contents (TOC).
    Point to New in the right-click menu. Then, click Page in the sub-menu that displays.
      This places that topic in the level under that book. Now you just need to associate that topic with that book (so that when you click on the book, this topic displays). 
    Right-click the book icon again. This time select Properties in the right-click menu that displays. This displays the TOC Book Properties dialog.
    Select the checkbox preceding Book with Link on this dialog. Now, scroll through the Existing Topics list to locate the topic you want to associate with that book. Click that topic in the list. Then, click OK on the dialog.
      To see if your topic is now associated with your book: 
    Right-click the book icon. If options Edit Item and Preview topic display on the right-click menu, you have been successful in associating that topic with that book. By the way, once you have associated a topic with a book, you must right-click the book icon to view or edit that topic from the TOC pod. (Of course, you can always edit it directly using the Topic List or Project manager pods.)
    But... (see the second bullet above) After I click "page" I think it wants me to select a page from the list of topics. When I select the proper page and continue through the process, the topic page is still below the Book title and the Book still isn't clickable!
    It appears I'm doing something wrong on the association part, but I don't know what!

  • Problem after creating a Photo Book

    After creating a 100 Pages Hardcover Book, I can't buy it, because Iphoto opens a window, saying that not all pages are filled with photos. verity I try, it goes back to one page, but this page is perfectly filled like all the others, no missing photos or empty frames at all.
    ried to change photos and layout, with no result. Cant buy this book.
    What can I do? I don't want to create a whole new Book

    You may have still a placeholder photo as the backdrop for your pictures.  Check the page layout, if it is using an image background. Then you need to change the background or add background picture:
    If you used the Golden Gate Bridge background, drag a photo to the background.

  • Bdc MB02 page down after 7items

    I am doing the mb02 change
    I have 15 items for the  material document number1 and 5 items for material document nmber 2 etc and 13 items for material document 3, I have recorded the page down in shdb.
    In mbo2 only 7 items are there per page.
    Now i am looping at the finaltable.
    Now how to tell to the system that material doc1 is having 15 items , ie how to handle page down after 7th item for material doc1.
    For material doc 2 only 5items so we need to bypass page down , please tell how to handle this in this loop and endloop of bdc.
    Loop at itab.
    Pagedown logic please.
    call transaction tcode MB02.
    ENDLOOp.

    Hi,
    No need of page down.
    There is one option in EDIT-> POSITIOn CURSOR menu. It will ask for ITEM number. Whatever item number you have provided that will come in the first line.So reord only first line everytime.
    then you can select and chenage them. this will be easier instead of page down where you need to know when you have to page down.
    Regards,
    Shanmugavel chandrasekaran.

  • I cant use the option "view in browser" after creating my webpage.

    I am creating a webpage for my project. After creating the front page, when I tried to view it in the browser, the "view in the browser"option was unavailable. Kindly help me.

    Hi Rebecca,
    Thank you for posting in MSDN forum.
    >> I  am creating a webpage for my project. After creating the front page, when I tried to view it in the browser, the "view in the browser"option was unavailable.
    Based on your issue, first of all, I suggest you could try to save the web page you created and then right click your solution or web project->build your solution/project and then check this issue again.
    You could also try to use the Ctrl+Shift+W to check if you could view your web page in the browser.
    Generally, I know that when we choose the "view in browser" option by right-click a .aspx web page. So to check if this issue is related to the VS IDE or the specified project, I suggest you could try to create a simple ASP.NET project and
    the add a .aspx file, then check if you can see the "view in browser" option by right-click the .aspx web page.
    (1) If you still could not see the "view in browser" option, I suggest you could try to reset the VS setting file by clicking the TOOLS->Import and Export Settings... check this issue again.
    If it sill could not help you, maybe you will need to repair or re-install the VS IDE check this issue.
    (2) If you could see the "view in browser" option, I assume that the issue maybe related to your code for your web page. So please you ask this issue directly to the ASP.NET forum:http://forums.asp.net/ you
    will get better support.
    In addition, if you did not install and use the IE for this web page, I suggest you could try to install the IE and then check this issue.
    Best Regards,
    We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
    Click
    HERE to participate the survey.

  • Creating a dynamic page for each record.

    So I understand how to grab a single row from a database for use on a dynamic page.  Now creating 1,000 pages for each row would be rather tedious even with copy and paste.  So can anyone provide me some information on how to do this without creating each page manually?

    >See what im saying?
    No.
    >What you are suggesting wouldn't actually produce a page for that product which can be linked to from other areas of the site.
    Yes it would. You create a link to a dynamic page and pass it the id of the item you want to display. So instead of using a link to a static page like this:
    <a href="mywidget_01.html">My Widget 101</a>
    You would link to a dynamic page like this:
    <a href="widgets.php?id=101">My Widget 101</a>
    The widgets.php would read the query string and pull the correct data for widget 101 from the database. You could even use url rewriting so the url of the dynamic page for widget 101 would be http://example.com/widget101
    >What I need is an easier way to produce 40,000 static pages.
    That's crazy. It defeats the whole purpose of dynamic sites. Before you start on this, make sure you fully understand your options.

Maybe you are looking for