Redirect to web authentication not working on Cisco 5508 Wireless Controller
Hi,
I have a wlan with web authentication:
http://i55.tinypic.com/w145zk.png
and
http://i51.tinypic.com/344sfm0.png
When I connect to the SSID (I get correct IP from the Cisco 5508 Controller) and try to surf, I do not get redirected to the web authentication page (https://1.1.1.1/login.html), when I manually insert the URL I get "cannot display the webpage". Any idea?
The virtual interface is 1.1.1.1.
Here is a screenshot of interface and internal dhcp:
http://i52.tinypic.com/2vkm1d2.png
Any idea why clients are not redirecting?
Thanks!
Thanks for the reply dmantil!
When I changed the Virtual DNS name to 1.1.1.1 (the same as the IP) I get redirected if I use http://198.133.219.25, but not with http://cisco.com, I get redirected only if I use IP.
I forgot to mention that the controller is in a lab with no access to DNS server. Does the controller check if the domain is valid before redirecting users? I cant find any documentation on how the controller redirect users.
Similar Messages
-
I cannot get my IPad2 to print (it cannot find the printer) using a Laserjet CP1525nw color printer across a wireless network using a Cisco 1508 Wireless Controller with 49 wireless access points. HELP!!!!
What is the secret to getting Bonjour to work on it?
I can get the IPad2 to locate the HP CP1525nw printer without a hitch using a low budget Netgear WAG102 stand alone wireless access point on the same network.If it helps somebody, here is what you need to do.
It worked for me, but only in Multicast-Unicast mode.
http://www.cisco.com/en/US/products/hw/wireless/ps4570/products_tech_note09186a0 080bb1d7c.shtml -
Cisco Ise Central Web authentication not working
Hello Guys,
CWA is not working. It says that authentication suceeded but posture status is pending. No error in my Monitor--authentication. Checking it in my Windows 7, it does not shows the CWA portal.
What might be the possible problem of this.?
thanksKindly review the below links:
http://www.cisco.com/en/US/products/ps11640/products_configuration_example09186a0080ba6514.shtml
http://www.cisco.com/en/US/products/ps11640/products_configuration_example09186a0080bead09.shtml -
Cisco 5508 Wireless Controller with Splash Page Disclaimer
How do one configure a splash disclaimer page on a Cisco Wireless Controller 5508 with no authentication?
JimmyThere are many options to you in this scenario, but if you're looking to simply provide a splash page via the WLC without interacting with any other web servers, you can configure Local Web Authentication (LWA) as seen in this configuration example.
http://www.cisco.com/c/en/us/support/docs/wireless-mobility/wlan-security/69340-web-auth-config.html?referring_site=RE&pos=1&page=http://www.cisco.com/c/en/us/support/docs/wireless-mobility/wlan-security/71881-ext-web-auth-wlc.html
If you are not wanting the authentication, you can choose the "passthrough" method which will not require any credentials, only accepting an AUP or whatever you want. -
Cisco 5508 Wireless Controller in HA mode
Hello,
is there a support of 1+1 mode (HA mode) at 5508 Controller?
If yes Is there a HA bundle or do we have to order two identical 5508 controller ?
Thanks for response.
RichardHello Richard,
FYI, WLC 7.3 has been released that includes HA features. Following are the links for your reference,
https://supportforums.cisco.com/docs/DOC-26827
http://www.cisco.com/en/US/prod/collateral/wireless/ps6302/ps8322/ps10315/qa_c67-714540.html
http://www.cisco.com/en/US/products/ps10315/products_tech_note09186a0080bd3504.shtml#req -
301 Wiki SSL redirect via Server Admin not working
I can't get http://myserver.com/wiki to redirect to https://myserver.com/wiki. I have other 301 redirects to send users to https pages working fine. How can I fix this? Thanks for your time - it's much appreciated. (Mavericks/Server Admin 3.1.2)
Regarding the redirect, I don't really understand why it's not possible. You can edit the non-SSL website in Web and add a 301 for /Wiki to redirect to https://myserver.com/wiki. In fact you can redirect the entire site to SSL - but that is problematic. I can understand why Mavericks server would be designed to automatically use SSL for wiki logins, if it's available. I only looked at redirects because this was not working. Without a redirect or with a redirect - I can login to Wiki via non-SSL or SSL. Where (specifically in which text file) are these redirects created using Server Admin written to? I can't find them in apache2/httpd.conf. Thanks again for your help.
-
Content Search Web Part not work for Office Web Apps
Hi ,
In Content Search Web Part word documents are not able to open in browser,but in document library its working.
Office Web Apps not work in Content search web part
Please help me
Regards
SachinBelow is the display template to open the document in OWA.
<html xmlns:mso="urn:schemas-microsoft-com:office:office" xmlns:msdt="uuid:C2F41010-65B3-11d1-A29F-00AA00C14882">
<head>
<title>AdSpace Picture on top, 3 lines on bottom</title>
<!--[if gte mso 9]><xml>
<mso:CustomDocumentProperties>
<mso:TemplateHidden msdt:dt="string">0</mso:TemplateHidden>
<mso:ManagedPropertyMapping msdt:dt="string">'Picture URL'{Picture URL}:'PublishingImage;PictureURL;PictureThumbnailURL','Link URL'{Link URL}:'Path','Line 1'{Line
1}:'Title','Line 2'{Line 2}:'Description','Line 3'{Line 3}:'','FileExtension','SecondaryFileExtension','ContentTypeId','ServerRedirectedURL'</mso:ManagedPropertyMapping>
<mso:MasterPageDescription msdt:dt="string">This Item Display Template will show a 304x100 picture of the item on top. The title and the default item description will display to the bottom of the picture with an additional line that is available
for a custom managed property.</mso:MasterPageDescription>
<mso:ContentTypeId msdt:dt="string">0x0101002039C03B61C64EC4A04F5361F385106603</mso:ContentTypeId>
<mso:TargetControlType msdt:dt="string">;#Content Web Parts;#</mso:TargetControlType>
<mso:HtmlDesignAssociated msdt:dt="string">1</mso:HtmlDesignAssociated>
<mso:_dlc_DocId msdt:dt="string">ZRMVMDDDEAE7-1-215</mso:_dlc_DocId>
<mso:_dlc_DocIdItemGuid msdt:dt="string">583b0835-32ff-4d1c-983f-b6ff4a0ef956</mso:_dlc_DocIdItemGuid>
<mso:_dlc_DocIdUrl msdt:dt="string">http://sp2013-dev-6:7000/sites/adspace/_layouts/15/DocIdRedir.aspx?ID=ZRMVMDDDEAE7-1-215, ZRMVMDDDEAE7-1-215</mso:_dlc_DocIdUrl>
<mso:HtmlDesignConversionSucceeded msdt:dt="string">True</mso:HtmlDesignConversionSucceeded>
<mso:HtmlDesignStatusAndPreview msdt:dt="string">http://sp2013-dev-6:7000/sites/adspace/_catalogs/masterpage/Display Templates/Content Web Parts/Item_PictureOnTop.html, Conversion successful.</mso:HtmlDesignStatusAndPreview>
</mso:CustomDocumentProperties>
</xml><![endif]-->
</head>
<body>
<!--
Warning: Do not try to add HTML to this section. Only the contents of the first <div>
inside the <body> tag will be used while executing Display Template code. Any HTML that
you add to this section will NOT become part of your Display Template.
-->
<script>
$includeLanguageScript(this.url, "~sitecollection/_catalogs/masterpage/Display Templates/Language Files/{Locale}/CustomStrings.js");
</script>
<!--
Use the div below to author your Display Template. Here are some things to keep in mind:
* Surround any JavaScript logic as shown below using a "pound underscore" (#_ ... _#) token
inside a comment.
* Use the values assigned to your variables using an "underscore pound equals"
(_#= ... =#_) token.
-->
<div id="Item_PictureOnTop">
<!--#_
var useWACUrl = !$isEmptyString(ctx.CurrentItem.ServerRedirectedURL);
if(ctx.ScriptApplicationManager && ctx.ScriptApplicationManager.states){
useWACUrl = (useWACUrl && !ctx.ScriptApplicationManager.states.openDocumentsInClient);
var appAttribs = "";
if(!useWACUrl)
if (!$isEmptyString(ctx.CurrentItem.csr_OpenApp)) { appAttribs += "openApp=\"" + $htmlEncode(ctx.CurrentItem.csr_OpenApp) + "\"" };
if (!$isEmptyString(ctx.CurrentItem.csr_OpenControl)) { appAttribs += " openControl=\"" + $htmlEncode(ctx.CurrentItem.csr_OpenControl) + "\"" };
var url = ctx.CurrentItem.csr_Path;
if($isEmptyString(url)){
if(useWACUrl)
url = ctx.CurrentItem.ServerRedirectedURL;
} else {
url = ctx.CurrentItem.Path;
var encodedId = $htmlEncode(ctx.ClientControl.get_nextUniqueId() + "_pictureOnTop_");
var linkURL = $getItemValue(ctx, "Link URL");
linkURL.overrideValueRenderer($urlHtmlEncode);
var iconURL = Srch.ContentBySearch.getIconSourceFromItem(ctx.CurrentItem);
var line1 = $getItemValue(ctx, "Line 1");
var setLineHeightRenderer = function(valueInfoObj)
if(!$isNull(valueInfoObj) && !valueInfoObj.isEmpty)
if(!$isNull(valueInfoObj.defaultValueRenderer))
return valueInfoObj.defaultValueRenderer(valueInfoObj);
else
return valueInfoObj.toString();
else
return " ";
var line2 = $getItemValue(ctx, "Line 2");
line2.overrideValueRenderer(setLineHeightRenderer);
var line3 = $getItemValue(ctx, "Line 3");
line3.overrideValueRenderer(setLineHeightRenderer);
var pictureURL = $getItemValue(ctx, "Picture URL");
var pictureId = encodedId + "picture";
var pictureMarkup = Srch.ContentBySearch.getPictureMarkup(pictureURL, 304, 100, ctx.CurrentItem, "cbs-pictureOnTopImg", line1, pictureId);
var containerId = encodedId + "container";
var pictureLinkId = encodedId + "pictureLink";
var pictureContainerId = encodedId + "pictureContainer";
var dataContainerId = encodedId + "dataContainer";
var line1LinkId = encodedId + "line1Link";
var line1Id = encodedId + "line1";
var line2Id = encodedId + "line2";
var line3Id = encodedId + "line3";
_#-->
<div class="top-content-box" id="_#= containerId =#_" data-displaytemplate="ItemPictureOnTop">
<div class="top-content-img" id="_#= pictureContainerId =#_">
<a class="cbs-pictureImgLink" href="_#= $urlHtmlEncode(url) =#_" title="_#= $htmlEncode(line1) =#_" target="_blank" id="_#= pictureLinkId =#_">
_#= pictureMarkup =#_
</a>
</div>
<h3 id="_#= line1Id =#_"><a class="cbs-pictureOnTopLine1Link" target="_blank" href="_#= $urlHtmlEncode(url) =#_" title="_#= $htmlEncode(line1) =#_"
id="_#= line1LinkId =#_"> _#= line1 =#_ </a></h3>
<span class="content-date" title="_#= $htmlEncode(line2) =#_" id="_#= line2Id =#_"><img class="cbs-Thumbnail" src="_#= $urlHtmlEncode(iconURL) =#_"
alt="_#= $htmlEncode(line1.defaultValueRenderer(line1)) =#_" id="_#= pictureId =#_" />_#=line2=#_</span>
</div>
</div>
</body>
</html>
Basically,ctx.CurrentItem.ServerRedirectedURL is calculated by a managed property ServerRedirectedURL which needs to be included in the display template.
Problem solved.
Nehal Bhandari,ATL, Nagarro Softwares -
Revision: 1720
Author: [email protected]
Date: 2008-05-14 14:50:06 -0700 (Wed, 14 May 2008)
Log Message:
Bugs: LCDS-304 - Authentication not working in all cases when using security constraint with NIO endpoints.
QA: Yes
Doc: No
Details:
Update to the TomcatLoginCommand to work correctly with NIO endpoints.
Ticket Links:
http://bugs.adobe.com/jira/browse/LCDS-304
Modified Paths:
blazeds/branches/3.0.x/modules/opt/src/tomcat/flex/messaging/security/TomcatLoginCommand. javaRevision: 1720
Author: [email protected]
Date: 2008-05-14 14:50:06 -0700 (Wed, 14 May 2008)
Log Message:
Bugs: LCDS-304 - Authentication not working in all cases when using security constraint with NIO endpoints.
QA: Yes
Doc: No
Details:
Update to the TomcatLoginCommand to work correctly with NIO endpoints.
Ticket Links:
http://bugs.adobe.com/jira/browse/LCDS-304
Modified Paths:
blazeds/branches/3.0.x/modules/opt/src/tomcat/flex/messaging/security/TomcatLoginCommand. java -
Web links not working in iPhone calendar notes. Used to work. Ideas?
Web links not working in iPhone calendar notes. Used to work. Ideas?
Basic troubleshooting from the User's Guide is reset, restart, restore (first from backup then as new). Has any of this been tried?
-
Some web sites not working in FF but they are OK in Safari.
A couple of times lately I have had web sites not work correctly with Firefox. I need to switch to Safari to complete the tasks I needed to do. My FF is running on Mountain Lion and is up to date.
Thanks,
MJTHello michaeljt, the sites you have problem, is it with a lot of flash content ?
Many site issues can be caused by corrupt cookies or cache. In order to try to fix these problems, the first step is to clear both cookies and the cache.
Note: ''This will temporarily log you out of all sites you're logged in to.''
To clear cache and cookies do the following:
#Go to Firefox > History > Clear recent history or (if no Firefox button is shown) go to Tools > Clear recent history.
#Under "Time range to clear", select "Everything".
#Now, click the arrow next to Details to toggle the Details list active.
#From the details list, check ''Cache'' and ''Cookies'' and uncheck everything else.
#Now click the ''Clear now'' button.
Further information can be found in the [[Clear your cache, history and other personal information in Firefox]] article.
Please reload the webpage while bypassing the cache using '''one''' of the following steps:
*Hold down the ''Shift'' key and click the ''Reload'' button with the left mouse key.
OR
*Press ''Ctrl'' + ''F5'' or ''Ctrl'' + ''Shift'' + ''R'' (Windows and Linux)
*Press ''Command'' + ''Shift'' + ''R'' (Mac)
See if this helps solve the issues you had and please report back to us!
thank you -
"no serializer is registered..." error with a web service not working
I'm using JDeveloper 10.1.3
EJB 3.0
I'm having issues with the web service not working after I create a client for it. The web service works fine up until I generate the proxy on the other side.
ERROR An error occurred for port: {http://buslogic/}MyWebService1SoapHttpPort: no serializer is registered for (class buslogic.runtime.....
I saved the file before I added the proxy and the wsdl looks the same between the working one and the non working one. I can not pin point the when the change to the web service is occuring. It seemed to work once all the way up until I had a ADF page trying to retrieve data, another time it failed when the proxy was created.
I can get the version that I saved to work immediately after the version that does not fails.
Any help would be greatly appreciated,
DanI'm using JDeveloper 10.1.3
EJB 3.0
I'm having issues with the web service not working after I create a client for it. The web service works fine up until I generate the proxy on the other side.
ERROR An error occurred for port: {http://buslogic/}MyWebService1SoapHttpPort: no serializer is registered for (class buslogic.runtime.....
I saved the file before I added the proxy and the wsdl looks the same between the working one and the non working one. I can not pin point the when the change to the web service is occuring. It seemed to work once all the way up until I had a ADF page trying to retrieve data, another time it failed when the proxy was created.
I can get the version that I saved to work immediately after the version that does not fails.
Any help would be greatly appreciated,
Dan -
Flash player download web site not working
After uninstalling flash player, I can't get the web site to reinstall it. I go to the web site click the agree and install now and gos to the next page but nothing pops up like it said it should.
http://get.adobe.com/flashplayer/thankyou/activex/?installer=Flash_Player_10_for_Windows_I nternet_Explorer&i=McAfee_Security_Scan_Plus&d=Google_Toolbar_6.3Hi eidnolb,
My OS is windows 7 Ultimate. There no Service packs listed Microsoft don't have one for it yet. My brower is Internet explorer 8 version: 8.0.7600.16385. My firewall is not causeing problems and the popup blocker didn't even activate.
Date: Wed, 14 Apr 2010 10:01:33 -0600
Subject: Flash Player flash player download web site not working
Hi newcomer76, Please post back your operating system and if any applicable Service Packs, any and all browsers that you use with the versions.
With that information, I'll be able to give you instructions and the links you need.
Thanks,
eidnolb
> -
The web controls not work(windows phone)
Hi
I have a web app.after I make an animation in this page(like a transition page in loading page), the web controls not work more.
the site is shown but any thing not work like scrolling or tap in linksCan you please explain more clearly what you are doing and what you need help with? What is your overall scenario, what exactly is your code doing, what behaviour do you expect and how is that different from what you actually see?
-
Can't add my new license on my cisco 2500 wireless controller
hello,
i already have 25 license installed on my Cisco 2500 wireless controller.
but when i need add my new bundle license, i can't see him on my admin panel.
i following this steps for installing my new license :
1- i go on WLC panel
2- management => software activation => commands
3- i select "install license"
4- i setting a correct path
5- when i clic on "install license", i can see two following message : "File transfer operation started" and "Installation Process Completed ". but when i go on "licenses" i can't see
tanks for helpHi Serge,
In case you have another license installed on the controller with higher license than the one that you are installing, then the license installation will fail.
In case you want to install a new license with higher number of AP count, then you can install it, then save and reboot the controller.
Also I noticed when you install a new license and the summation of the previously installed license and the newly installed license is exceeding the max allowed AP count on the controller, then the installation will fail.
In such scenario, deactivate the current license by making the evaluation license priority to high, then after that install the new license and then change the priority to medium and make the evaluation license to low in addition to the previous license.
Kind Regards
Mohammad Setan -
Web-Auth not working on Apple IOS devices
I am using L3 web-auth (when no mac filter match). I currently have downloaded the custom page to the controller. It works fine with Windows and Android. I can not get to the redirect page on Apple IOS though.
In my pre-auth ACL I have added rules to allow any traffic to and from 17.0.0.0/8. I can see that it is getting hits.
I have also tried the config netwrok web-auth captive-bypass enable command.
Neither of these have helped.
My Apple client is getting an IP address.
Any ideas? ThanksWLAN on Anchor controller:
(Cisco Controller) >show wlan 2
WLAN Identifier.................................. 2
Profile Name..................................... HopeNet
Network Name (SSID).............................. HopeNet
Status........................................... Enabled
MAC Filtering.................................... Enabled
Broadcast SSID................................... Disabled
AAA Policy Override.............................. Disabled
Network Admission Control
Client Profiling Status ....................... Disabled
DHCP ......................................... Disabled
HTTP ......................................... Disabled
Radius-NAC State............................... Disabled
SNMP-NAC State................................. Disabled
Quarantine VLAN................................ 0
Maximum number of Associated Clients............. 0
Maximum number of Clients per AP Radio........... 200
Number of Active Clients......................... 2
Exclusionlist Timeout............................ 60 seconds
Session Timeout.................................. 3600 seconds
CHD per WLAN..................................... Enabled
--More-- or (q)uit
Webauth DHCP exclusion........................... Disabled
Interface........................................ guest-dmz
Multicast Interface.............................. Not Configured
WLAN IPv4 ACL.................................... unconfigured
WLAN IPv6 ACL.................................... unconfigured
DHCP Server...................................... Default
DHCP Address Assignment Required................. Disabled
Static IP client tunneling....................... Disabled
PMIPv6 Mobility Type............................. none
Quality of Service............................... Silver
Per-SSID Rate Limits............................. Upstream Downstream
Average Data Rate................................ 0 0
Average Realtime Data Rate....................... 0 0
Burst Data Rate.................................. 0 0
Burst Realtime Data Rate......................... 0 0
Per-Client Rate Limits........................... Upstream Downstream
Average Data Rate................................ 0 0
Average Realtime Data Rate....................... 0 0
Burst Data Rate.................................. 0 0
Burst Realtime Data Rate......................... 0 0
Scan Defer Priority.............................. 4,5,6
Scan Defer Time.................................. 100 milliseconds
WMM.............................................. Allowed
--More-- or (q)uit
WMM UAPSD Compliant Client Support............... Disabled
Media Stream Multicast-direct.................... Disabled
CCX - AironetIe Support.......................... Enabled
CCX - Gratuitous ProbeResponse (GPR)............. Disabled
CCX - Diagnostics Channel Capability............. Disabled
Dot11-Phone Mode (7920).......................... Disabled
Wired Protocol................................... None
Passive Client Feature........................... Disabled
Peer-to-Peer Blocking Action..................... Drop
Radio Policy..................................... All
DTIM period for 802.11a radio.................... 1
DTIM period for 802.11b radio.................... 1
Radius Servers
Authentication................................ Disabled
Accounting.................................... Disabled
Dynamic Interface............................. Disabled
LDAP Servers
Server 1...................................... 10.4.21.177 389
Server 2...................................... 10.4.21.178 389
Local EAP Authentication......................... Disabled
Security
802.11 Authentication:........................ Open System
--More-- or (q)uit
FT Support.................................... Enabled
Static WEP Keys............................... Disabled
802.1X........................................ Disabled
Wi-Fi Protected Access (WPA/WPA2)............. Disabled
Wi-Fi Direct policy configured................ Disabled
EAP-Passthrough............................... Disabled
CKIP ......................................... Disabled
Web Based Authentication...................... Enabled-On-MACFilter-Failure
IPv4 ACL........................................ web-auth-test
IPv6 ACL........................................ Unconfigured
Web-Auth Flex ACL............................... Unconfigured
Web Authentication server precedence:
1............................................... local
2............................................... radius
3............................................... ldap
Web-Passthrough............................... Disabled
Conditional Web Redirect...................... Disabled
Splash-Page Web Redirect...................... Disabled
Auto Anchor................................... Enabled
FlexConnect Local Switching................... Disabled
flexconnect Central Dhcp Flag................. Disabled
flexconnect nat-pat Flag...................... Disabled
flexconnect Dns Override Flag................. Disabled
--More-- or (q)uit
FlexConnect Vlan based Central Switching ..... Disabled
FlexConnect Local Authentication.............. Disabled
FlexConnect Learn IP Address.................. Enabled
Client MFP.................................... Optional but inactive (WPA2 not configured)
Tkip MIC Countermeasure Hold-down Timer....... 60
Call Snooping.................................... Disabled
Roamed Call Re-Anchor Policy..................... Disabled
SIP CAC Fail Send-486-Busy Policy................ Enabled
SIP CAC Fail Send Dis-Association Policy......... Disabled
KTS based CAC Policy............................. Disabled
Band Select...................................... Disabled
Load Balancing................................... Disabled
Multicast Buffer................................. Disabled
Mobility Anchor List
WLAN ID IP Address Status
2 10.241.15.5 Up
802.11u........................................ Disabled
MSAP Services.................................. Disabled
WLAN on foreign controller:
WLAN Identifier.................................. 4
Profile Name..................................... HopeNet
Network Name (SSID).............................. HopeNet
Status........................................... Enabled
MAC Filtering.................................... Enabled
Broadcast SSID................................... Disabled
AAA Policy Override.............................. Disabled
Network Admission Control
Client Profiling Status ....................... Disabled
DHCP ......................................... Disabled
HTTP ......................................... Disabled
Radius-NAC State............................... Disabled
SNMP-NAC State................................. Disabled
Quarantine VLAN................................ 0
Maximum number of Associated Clients............. 0
Maximum number of Clients per AP Radio........... 200
Number of Active Clients......................... 2
Exclusionlist Timeout............................ 60 seconds
Session Timeout.................................. 3600 seconds
CHD per WLAN..................................... Enabled
--More-- or (q)uit
Webauth DHCP exclusion........................... Disabled
Interface........................................ management
Multicast Interface.............................. Not Configured
WLAN IPv4 ACL.................................... unconfigured
WLAN IPv6 ACL.................................... unconfigured
DHCP Server...................................... Default
DHCP Address Assignment Required................. Disabled
Static IP client tunneling....................... Disabled
PMIPv6 Mobility Type............................. none
Quality of Service............................... Silver
Per-SSID Rate Limits............................. Upstream Downstream
Average Data Rate................................ 0 0
Average Realtime Data Rate....................... 0 0
Burst Data Rate.................................. 0 0
Burst Realtime Data Rate......................... 0 0
Per-Client Rate Limits........................... Upstream Downstream
Average Data Rate................................ 0 0
Average Realtime Data Rate....................... 0 0
Burst Data Rate.................................. 0 0
Burst Realtime Data Rate......................... 0 0
Scan Defer Priority.............................. 4,5,6
Scan Defer Time.................................. 100 milliseconds
WMM.............................................. Allowed
--More-- or (q)uit
WMM UAPSD Compliant Client Support............... Disabled
Media Stream Multicast-direct.................... Disabled
CCX - AironetIe Support.......................... Enabled
CCX - Gratuitous ProbeResponse (GPR)............. Disabled
CCX - Diagnostics Channel Capability............. Disabled
Dot11-Phone Mode (7920).......................... Disabled
Wired Protocol................................... None
Passive Client Feature........................... Disabled
Peer-to-Peer Blocking Action..................... Drop
Radio Policy..................................... All
DTIM period for 802.11a radio.................... 1
DTIM period for 802.11b radio.................... 1
Radius Servers
Authentication................................ Disabled
Accounting.................................... Disabled
Dynamic Interface............................. Disabled
Local EAP Authentication......................... Disabled
Security
802.11 Authentication:........................ Open System
FT Support.................................... Disabled
Static WEP Keys............................... Disabled
802.1X........................................ Disabled
--More-- or (q)uit
Wi-Fi Protected Access (WPA/WPA2)............. Disabled
Wi-Fi Direct policy configured................ Disabled
EAP-Passthrough............................... Disabled
CKIP ......................................... Disabled
Web Based Authentication...................... Enabled-On-MACFilter-Failure
IPv4 ACL........................................ Unconfigured
IPv6 ACL........................................ Unconfigured
Web-Auth Flex ACL............................... Unconfigured
Web Authentication server precedence:
1............................................... local
2............................................... radius
3............................................... ldap
Web-Passthrough............................... Disabled
Conditional Web Redirect...................... Disabled
Splash-Page Web Redirect...................... Disabled
Auto Anchor................................... Enabled
FlexConnect Local Switching................... Disabled
flexconnect Central Dhcp Flag................. Disabled
flexconnect nat-pat Flag...................... Disabled
flexconnect Dns Override Flag................. Disabled
FlexConnect Vlan based Central Switching ..... Disabled
FlexConnect Local Authentication.............. Disabled
FlexConnect Learn IP Address.................. Enabled
--More-- or (q)uit
Client MFP.................................... Optional but inactive (WPA2 not configured)
Tkip MIC Countermeasure Hold-down Timer....... 60
Call Snooping.................................... Disabled
Roamed Call Re-Anchor Policy..................... Disabled
SIP CAC Fail Send-486-Busy Policy................ Enabled
SIP CAC Fail Send Dis-Association Policy......... Disabled
KTS based CAC Policy............................. Disabled
Band Select...................................... Disabled
Load Balancing................................... Disabled
Multicast Buffer................................. Disabled
Mobility Anchor List
WLAN ID IP Address Status
4 10.241.15.5 Up
802.11u........................................ Disabled
MSAP Services.................................. Disabled
Interface detailed virtual on Anchor controller:
(Cisco Controller) >show interface detailed virtual
Interface Name................................... virtual
MAC Address...................................... 68:ef:bd:93:bd:00
IP Address....................................... 1.1.1.1
Virtual DNS Host Name............................ anchor.stjude.org
AP Manager....................................... No
Guest Interface.................................. No
Interface detailed virtual on Foreign controller:
(30-WiSM2-slot2-1) >show interface detailed virtual
Interface Name................................... virtual
MAC Address...................................... 2c:54:2d:3a:51:a0
IP Address....................................... 1.1.1.1
Virtual DNS Host Name............................ Disabled
AP Manager....................................... No
Guest Interface.................................. No
Maybe you are looking for
-
SSD Crucial M500 is not seen in Windows 8.1 setup but it is seen in Windows 7 setup
Hello, I have problem with new SSD Crucial M500 on new notebook HP 250 G3 (J0Y29EA). Notebook has Windows 8.1 and latest BIOS. I want to replace HDD with SSD. So I created 4 DVDs with "HP Recovery Media Creation". Then I format SSD in Disk Management
-
Hi For past year or so my mac book has been getting gradually worse. Spinning wheel, and overheating, last night I had trouble just getting it to start in Safe Mode (been using the on/off button a lot lately!) Problem may be related to media - iMovie
-
Since I upgraded to IOS5, my Smart Playlists are in a random order. Since I use it for listening to Talking Books this makes it useless. How can I control the order of a Smart Playlist?
-
SQL extraction from network trace?
Anyone know of a way to easily extract SQL statements from a ".cap" file created from a protocol analyzer like "snoop" or MS Network Monitor? It seems too useful for someone not to have created such a utility. I can use something like Ethereal to bro
-
Best place to buy iBook battery in UK
I reckon my battery needs replacing. Can anyone recommend a good place in the UK to get one for my G3/800 iBook? I know I know Google could give me an answer, but put in iBook Battery and it really is a bit of a mammouth trawl to find exactly what I'