Redirecting domain to prosite

I have a site i pushed live with bc in muse and now want my domain to be my prosite website through behance and I must be doing something wrong.  I added my custom domain name I went to BC and tried to redirect but it is not working. I check the staus on prosite and it says error, the domain is pointed to some other IP.  I do not understand what info is required in what fiel under what drop down menu. I am admittedly a novice, so any spelled out help, like I was in kindergarten, would be most appreciated.  Thank you.  Amanda

BC is not a domain host. If you no longer want your domain to point to your BC site and to something else you need to delete your domains in your BC site and go to your domain registra and change the NS records or A-record (depends on which was set up) and point that to your new sites required details

Similar Messages

  • How to redirect domain controller address to another one without changing IP Helper

    Hi All
    Basically we have been told that our domain controller's address is going to change, we have many switches 200+ that have the current address as the IP Helper address. The topology is basically a core 6509 that goes out to approx 45 distribution switches 3560s that then have multiple access switches hanging off 3560s, 2950s and 2960s. There are also many workstations that have  the domain controllers IP statically assigned.
    My question is is there a way that this server can be decomisioned and replaced with a new one with a different IP without having to change all of the devices IP Helper address static DNS etc. but to just redirect requests for that address to another at a higher level? Like say the core receives requests for the old IP and redirects requests to the new address? We have tried suggesting they keep the same IP for the new server but it's not going to happen.
    thanks

    You can use NAT to do that. Be careful though because that is really a band-aid and not a resolution to the problem.
    http://www.cisco.com/en/US/tech/tk648/tk361/tk438/tsd_technology_support_sub-protocol_home.html

  • Redirecting domain name

    Sorry people, this whole stuff with domains, DNS, A-Records etc. is very cryptic...
    My Problem:
    I own the domain "designformat.de". Host was the german company "1&1.de". I built the side with Muse now and published it on BC (CC-Membership). I made a redirection for the domain name to BC. It works, but the url shown is "designformat01.businesscatalyst.com. How do I change this into "designformat.de" ?
    Thanks for help!

    Using a frame redirection is probably not the most effective ways to redirect your domain to Business Catalyst.  You should call up 1&1 and tell them that you want to remove your "frame redirection" and add an A record pointing to "54.246.209.120" for your "www" and naked domains.
    Once you do this, login to BC and add your custom domain name under Site Settings > Site Domains > Add New Domain
    When adding your domain, make sure to check "Use an external server" and if you want your custom domain to be the main domain for the site, click the "Default" checkbox too, making it the default domain/URL for your BC site.
    Adding frame redirection might be easier but you'll see some hits in your SEO for sure.

  • Redirecting Domain & Uploading Changes through Muse

    My site is hosted in business catalyst, but my domain is with GoDaddy. I keep redirecting my A records and Nameservers but the site appears then later is saying it's temporarily unavilable. Addtional to this, when the site does load on and off I try to upload changes and Muse says it is successful but days later nothing will have changed.
    Here is the site:
    <http://www.rawmountainfoods.com>
    Someone please help!

    Hi Candace,
    I did DNS look up for your site http://www.rawmountainfoods.com and found you are using external Name Server and you have correctly add A record to point to our data center IP address. I then checked your site and its working fine on our end. Please confirm whether or not, your issue is resolved. If not, please contact support directly, either by initiating chat from http://helpx.adobe.com/contact.html or log a ticket.
    Regards,
    Aish

  • Redirect domain to fixed IP adres

    Is it possible to configured the DNS of my E4200 to return a specific configured IP instead of actually go out and resolve it? So for example: www.google.com should return 192.168.1.1

    Not possible.

  • Redirecting traffic based on source address on CSS11503

    Hi all,
    I need to redirect HTTP traffic originating from a specific range of IPs to a specific farm of HTTP servers. More specifically, I need request comming to CSS's outside VIP address on port 80/tcp to be redirected to the HTTP farm (2 boxes with RFC1918 addresses) on port 30084/tcp.
    The trick is that this rule should only apply for a certain range of source IP addresses. The rest should be content switched normally. I.e. 80/tcp -> 80/tcp, etc.
    Is this possible with ACL or somthing similar?
    I'm running WebNS 7.20 on a CSS11503.
    Thanks,
    haver

    you could create a 2nd VIP like x.x.x.x:81 and
    a service like
    service redirect
    domain x.x.x.x:81
    type redirect
    keepalive type none
    Under the Vip x.x.x.x:81, you configure the 2 services with private ip addresses and port 30084.
    Then you create an ACL
    acl 10
    clause 10 permit tcp destination content prefer redirect
    clause 99 permit any any destination any
    apply circuit-VLAN...
    Don't forget you will need an ACL permit any any on all other interfaces to avoid blocking the rest of the traffic.
    What this will do is tell the browser to close the current connection to vip:80 and reopen a new one to vip:81 and this will be loadbalanced to the private servers.
    Gilles.

  • HTTP redirects

    Hi,
    I want to configure http to https redirects on CCS 11501. Could someone guide me on how to implemet HTTPS redirect for a sub-directory.
    Say I have www.xyz.com by default it goes to http, which is fine. But if someone types in http://www.xyz.com/login or http://www.xyz.com/login/secure/index.html then it should be redirected to httpS://www.xyz.com/login or http://www.xyz.com/login/secure/index.html. Basically anything in and under login directory should be HTTPS.
    I have setup following but I am getting redirect loop
    content DEFAULT
    vip address 10.1.1.1
    protocol tcp
    port 80
    url "/*"
    add service Server1
    add service Server2
    advanced-balance arrowpoint-cookie
    active
    content SSL_RULE
    protocol tcp
    vip address 10.1.1.1
    port 443
    add service SSL_SERVICE
    active
    content LOGIN
    vip address 10.1.1.1
    protocol tcp
    port 80
    url "//www.xyz.com/login/*"
    add service LOGIN_RD
    active
    ==========================
    service LOGIN_RD
    ip address 2.2.2.2
    keepalive type none
    type redirect
    domain https://www.xyz.com
    active
    service SSL_SERVICE
    type ssl-accel
    slot 2
    add ssl-proxy-list SSL_LIST1
    keepalive type none
    active
    I would greatly appreciate any help.

    Your getting a redirect loop because you do not have an alternate port were the redirected traffic can be processed. The inbound request that contains "/login" will get redirected to the HTTPS equivalent however with your current configuration the connection will simply fall under the same redirect content rule and you will never resolve content correctly(redirect loop).
    The following configuration will work:
    content DEFAULT
    vip address 10.1.1.1
    protocol tcp
    port 80
    url "/*"
    add service Server1
    add service Server2
    advanced-balance arrowpoint-cookie
    active
    content DEFAULT
    vip address 10.1.1.1
    protocol tcp
    port 81
    url "/*"
    add service Server1
    add service Server2
    advanced-balance arrowpoint-cookie
    active
    content SSL_RULE
    protocol tcp
    vip address 10.1.1.1
    port 443
    add service SSL_SERVICE
    active
    content LOGIN
    vip address 10.1.1.1
    protocol tcp
    port 80
    url "/login*"
    add service LOGIN_RD
    active
    ==========================
    service LOGIN_RD
    type redirect
    no prepend-http
    keepalive type none
    domain https://www.xyz.com
    active
    service SSL_SERVICE
    type ssl-accel
    slot 2
    add ssl-proxy-list SSL_LIST1
    keepalive type none
    active
    Update the ssl-proxy-list with an alternate port to send the decrypted traffic too.
    ssl-server 1 cipher all-cipher-suites 10.1.1.1 81
    I chose port 81 as the alternate decrypted port, however you can choose any other port. Please be sure that your servers are setup to accept traffic on that alternate port as well. If not, you can simply setup a NAT rule and hardset the destination port on the services to port 80. This will allow the CSS to re-write the destination port to port 80 when the decrypted traffic gets sent to the alternate port 81 content rule.
    Hope this info helps.
    - Jason

  • Trying to capture a URL String after a redirect.

    I'm trying to capture a URL string after a redirect. Is this possible? Am I going at this the wrong way?
    They code below always comes back; isURLInaccessible: true
    I've tried mutliple attempts of using Security.loadPolicyFile, still no luck.
    Both the URLRequest domain and the redirect domain have crossdomain files with access set to *.
    [CODE]
    public function init():void{
              var loader:Loader = new Loader();
              loader.contentLoaderInfo.addEventListener(ProgressEvent.PROGRESS, progressHandler);
              var request:URLRequest = new URLRequest(myVideoURL);
              loader.load(request);
    private function progressHandler(pe:ProgressEvent):void{
              var info:LoaderInfo = LoaderInfo(pe.target.loader.contentLoaderInfo)
                     if(info.isURLInaccessible){
                         trace("isURLInaccessible: " + info.isURLInaccessible);
                     }else{
                        trace(info.url);
    [CODE]

    use an Event.COMPLETE listener and listener function to check that property.

  • Moving from Debian to Arch and exim Problem!

    hello all,
    I Installed arch linux and trying to get exim to work. I use to have Debian with exim and would like to same exim configuration on the new Arch.
    Here my exim configuration:
    exim.conf
    MAIN_TLS_ENABLE = true
    daemon_smtp_ports = 25
    exim_path = /usr/sbin/exim
    .ifndef CONFDIR
    CONFDIR = /etc/mail
    .endif
    UPEX4CmacrosUPEX4C = 1
    domainlist local_domains = @:localhost:dsearch;/etc/mail/virtual.d
    domainlist relay_to_domains = MAIN_RELAY_TO_DOMAINS
    hostlist relay_from_hosts = '10.0.1.0/24;10.0.0.0/24'
    .ifndef MAIN_PRIMARY_HOSTNAME_AS_QUALIFY_DOMAIN
    .ifndef MAIN_QUALIFY_DOMAIN
    qualify_domain = ETC_MAILNAME
    .else
    qualify_domain = MAIN_QUALIFY_DOMAIN
    .endif
    .endif
    .ifdef MAIN_LOCAL_INTERFACES
    local_interfaces = MAIN_LOCAL_INTERFACES
    .endif
    .ifndef LOCAL_DELIVERY
    LOCAL_DELIVERY=mail_spool
    .endif
    gecos_pattern = ^([^,:]*)
    gecos_name = $1
    .ifndef CHECK_RCPT_LOCAL_LOCALPARTS
    .endif
    .ifndef CHECK_RCPT_REMOTE_LOCALPARTS
    .endif
    .ifndef MAIN_LOG_SELECTOR
    MAIN_LOG_SELECTOR = +tls_peerdn
    .endif
    .ifndef MAIN_ACL_CHECK_MAIL
    MAIN_ACL_CHECK_MAIL = acl_check_mail
    .endif
    acl_smtp_mail = MAIN_ACL_CHECK_MAIL
    .ifndef MAIN_ACL_CHECK_RCPT
    MAIN_ACL_CHECK_RCPT = acl_check_rcpt
    .endif
    acl_smtp_rcpt = MAIN_ACL_CHECK_RCPT
    .ifndef MAIN_ACL_CHECK_DATA
    MAIN_ACL_CHECK_DATA = acl_check_data
    .endif
    acl_smtp_data = MAIN_ACL_CHECK_DATA
    .ifdef MESSAGE_SIZE_LIMIT
    message_size_limit = MESSAGE_SIZE_LIMIT
    .endif
    .ifdef MAIN_ALLOW_DOMAIN_LITERALS
    allow_domain_literals
    .endif
    .ifndef DC_minimaldns
    .ifndef MAIN_HOST_LOOKUP
    MAIN_HOST_LOOKUP = *
    .endif
    host_lookup = MAIN_HOST_LOOKUP
    .endif
    .ifdef MAIN_HARDCODE_PRIMARY_HOSTNAME
    primary_hostname = MAIN_HARDCODE_PRIMARY_HOSTNAME
    .endif
    .ifdef MAIN_SMTP_ACCEPT_MAX_NOMAIL_HOSTS
    smtp_accept_max_nonmail_hosts = MAIN_SMTP_ACCEPT_MAX_NOMAIL_HOSTS
    .endif
    .ifndef MAIN_FORCE_SENDER
    local_from_check = false
    local_sender_retain = true
    untrusted_set_sender = *
    .endif
    .ifndef MAIN_IGNORE_BOUNCE_ERRORS_AFTER
    MAIN_IGNORE_BOUNCE_ERRORS_AFTER = 2d
    .endif
    ignore_bounce_errors_after = MAIN_IGNORE_BOUNCE_ERRORS_AFTER
    .ifndef MAIN_TIMEOUT_FROZEN_AFTER
    MAIN_TIMEOUT_FROZEN_AFTER = 7d
    .endif
    timeout_frozen_after = MAIN_TIMEOUT_FROZEN_AFTER
    .ifndef MAIN_FREEZE_TELL
    MAIN_FREEZE_TELL = postmaster
    .endif
    freeze_tell = MAIN_FREEZE_TELL
    .ifndef SPOOLDIR
    SPOOLDIR = /var/spool/exim
    .endif
    spool_directory = SPOOLDIR
    .ifndef MAIN_TRUSTED_USERS
    MAIN_TRUSTED_USERS = uucp
    .endif
    #trusted_users = MAIN_TRUSTED_USERS
    .ifdef MAIN_TRUSTED_GROUPS
    trusted_groups = MAIN_TRUSTED_GROUPS
    .endif
    smtp_banner = \t$smtp_active_hostname ESMTP $tod_full
    .ifdef
    .ifndef MAIN_TLS_ADVERTISE_HOSTS
    MAIN_TLS_ADVERTISE_HOSTS = *
    .endif
    tls_advertise_hosts = MAIN_TLS_ADVERTISE_HOSTS
    .ifdef MAIN_TLS_CERTKEY
    tls_certificate = MAIN_TLS_CERTKEY
    .else
    .ifndef MAIN_TLS_CERTIFICATE
    MAIN_TLS_CERTIFICATE = /etc/ssl/certs/mail.crt
    .endif
    tls_certificate = MAIN_TLS_CERTIFICATE
    .ifndef MAIN_TLS_PRIVATEKEY
    MAIN_TLS_PRIVATEKEY = /etc/ssl/private/mail.key
    .endif
    tls_privatekey = MAIN_TLS_PRIVATEKEY
    .endif
    .ifndef MAIN_TLS_VERIFY_CERTIFICATES
    MAIN_TLS_VERIFY_CERTIFICATES = ${if exists{/etc/ssl/certs/mail.crt}\
    {/etc/ssl/certs/mail.crt}\
    {/dev/null}}
    .endif
    tls_verify_certificates = MAIN_TLS_VERIFY_CERTIFICATES
    .ifdef MAIN_TLS_VERIFY_HOSTS
    tls_verify_hosts = MAIN_TLS_VERIFY_HOSTS
    .endif
    .ifndef MAIN_TLS_TRY_VERIFY_HOSTS
    MAIN_TLS_TRY_VERIFY_HOSTS = *
    .endif
    tls_try_verify_hosts = MAIN_TLS_TRY_VERIFY_HOSTS
    .endif
    .ifdef MAIN_LOG_SELECTOR
    log_selector = MAIN_LOG_SELECTOR
    .endif
    begin acl
    acl_local_deny_exceptions:
    accept
    hosts = ${if exists{CONFDIR/host_local_deny_exceptions}\
    {CONFDIR/host_local_deny_exceptions}\
    accept
    senders = ${if exists{CONFDIR/sender_local_deny_exceptions}\
    {CONFDIR/sender_local_deny_exceptions}\
    accept
    hosts = ${if exists{CONFDIR/local_host_whitelist}\
    {CONFDIR/local_host_whitelist}\
    accept
    senders = ${if exists{CONFDIR/local_sender_whitelist}\
    {CONFDIR/local_sender_whitelist}\
    .ifdef LOCAL_DENY_EXCEPTIONS_LOCAL_ACL_FILE
    .include LOCAL_DENY_EXCEPTIONS_LOCAL_ACL_FILE
    .endif
    .ifdef WHITELIST_LOCAL_DENY_LOCAL_ACL_FILE
    .include WHITELIST_LOCAL_DENY_LOCAL_ACL_FILE
    .endif
    acl_check_mail:
    .ifdef CHECK_MAIL_HELO_ISSUED
    deny
    message = no HELO given before MAIL command
    condition = ${if def:sender_helo_name {no}{yes}}
    .endif
    accept
    acl_check_rcpt:
    accept
    hosts = :
    .ifdef CHECK_RCPT_LOCAL_LOCALPARTS
    deny
    domains = +local_domains
    local_parts = CHECK_RCPT_LOCAL_LOCALPARTS
    message = restricted characters in address
    .endif
    .ifdef CHECK_RCPT_REMOTE_LOCALPARTS
    deny
    domains = !+local_domains
    local_parts = CHECK_RCPT_REMOTE_LOCALPARTS
    message = restricted characters in address
    .endif
    accept
    .ifndef CHECK_RCPT_POSTMASTER
    local_parts = postmaster
    .else
    local_parts = CHECK_RCPT_POSTMASTER
    .endif
    domains = +local_domains : +relay_to_domains
    .ifdef CHECK_RCPT_VERIFY_SENDER
    deny
    message = Sender verification failed
    !acl = acl_local_deny_exceptions
    !verify = sender
    .endif
    deny
    !acl = acl_local_deny_exceptions
    senders = ${if exists{CONFDIR/local_sender_callout}\
    {CONFDIR/local_sender_callout}\
    !verify = sender/callout
    accept
    hosts = +relay_from_hosts
    control = submission/sender_retain
    accept
    authenticated = *
    control = submission/sender_retain
    require
    message = relay not permitted
    domains = +local_domains : +relay_to_domains
    require
    verify = recipient
    deny
    !acl = acl_local_deny_exceptions
    recipients = ${if exists{CONFDIR/local_rcpt_callout}\
    {CONFDIR/local_rcpt_callout}\
    !verify = recipient/callout
    deny
    message = sender envelope address $sender_address is locally blacklisted here. If you think this is wrong, get in touch with postmaster
    !acl = acl_local_deny_exceptions
    senders = ${if exists{CONFDIR/local_sender_blacklist}\
    {CONFDIR/local_sender_blacklist}\
    deny
    message = sender IP address $sender_host_address is locally blacklisted here. If you think this is wrong, get in touch with postmaster
    !acl = acl_local_deny_exceptions
    hosts = ${if exists{CONFDIR/local_host_blacklist}\
    {CONFDIR/local_host_blacklist}\
    .ifdef CHECK_RCPT_REVERSE_DNS
    warn
    message = X-Host-Lookup-Failed: Reverse DNS lookup failed for $sender_host_address (${if eq{$host_lookup_failed}{1}{failed}{deferred}})
    condition = ${if and{{def:sender_host_address}{!def:sender_host_name}}\
    {yes}{no}}
    .endif
    .ifdef CHECK_RCPT_SPF
    deny
    message = [SPF] $sender_host_address is not allowed to send mail from ${if def:sender_address_domain {$sender_address_domain}{$sender_helo_name}}. \
    Please see http://www.openspf.org/Why?scope=${if def:sender_address_domain {mfrom}{helo}};identity=${if def:sender_address_domain {$sender_address}{$sender_helo_name}};ip=$sender_host_address
    log_message = SPF check failed.
    !acl = acl_local_deny_exceptions
    condition = ${run{/usr/bin/spfquery --ip \"$sender_host_address\" --mail-from \"$sender_address\" --helo \"$sender_helo_name\"}\
    {no}{${if eq {$runrc}{1}{yes}{no}}}}
    defer
    message = Temporary DNS error while checking SPF record. Try again later.
    condition = ${if eq {$runrc}{5}{yes}{no}}
    warn
    message = Received-SPF: ${if eq {$runrc}{0}{pass}{${if eq {$runrc}{2}{softfail}\
    {${if eq {$runrc}{3}{neutral}{${if eq {$runrc}{4}{unknown}{${if eq {$runrc}{6}{none}{error}}}}}}}}}}
    condition = ${if <={$runrc}{6}{yes}{no}}
    warn
    log_message = Unexpected error in SPF check.
    condition = ${if >{$runrc}{6}{yes}{no}}
    warn
    message = X-SPF-Guess: ${run{/usr/bin/spfquery --ip \"$sender_host_address\" --mail-from \"$sender_address\" \ --helo \"$sender_helo_name\" --guess true}\
    {pass}{${if eq {$runrc}{2}{softfail}{${if eq {$runrc}{3}{neutral}{${if eq {$runrc}{4}{unknown}\
    {${if eq {$runrc}{6}{none}{error}}}}}}}}}}
    condition = ${if <={$runrc}{6}{yes}{no}}
    defer
    message = Temporary DNS error while checking SPF record. Try again later.
    condition = ${if eq {$runrc}{5}{yes}{no}}
    .endif
    .ifdef CHECK_RCPT_IP_DNSBLS
    warn
    message = X-Warning: $sender_host_address is listed at $dnslist_domain ($dnslist_value: $dnslist_text)
    log_message = $sender_host_address is listed at $dnslist_domain ($dnslist_value: $dnslist_text)
    dnslists = CHECK_RCPT_IP_DNSBLS
    .endif
    .ifdef CHECK_RCPT_DOMAIN_DNSBLS
    warn
    message = X-Warning: $sender_address_domain is listed at $dnslist_domain ($dnslist_value: $dnslist_text)
    log_message = $sender_address_domain is listed at $dnslist_domain ($dnslist_value: $dnslist_text)
    !senders = ${if exists{CONFDIR/local_domain_dnsbl_whitelist}\
    {CONFDIR/local_domain_dnsbl_whitelist}\
    dnslists = CHECK_RCPT_DOMAIN_DNSBLS
    .endif
    .ifdef CHECK_RCPT_LOCAL_ACL_FILE
    .include CHECK_RCPT_LOCAL_ACL_FILE
    .endif
    accept
    domains = +relay_to_domains
    endpass
    verify = recipient
    accept
    acl_check_data:
    .ifdef CHECK_DATA_VERIFY_HEADER_SYNTAX
    deny
    message = Message headers fail syntax check
    !acl = acl_local_deny_exceptions
    !verify = header_syntax
    .endif
    .ifdef CHECK_DATA_VERIFY_HEADER_SENDER
    deny
    message = No verifiable sender address in message headers
    !acl = acl_local_deny_exceptions
    !verify = header_sender
    .endif
    .ifdef CHECK_DATA_LOCAL_ACL_FILE
    .include CHECK_DATA_LOCAL_ACL_FILE
    .endif
    accept
    begin routers
    .ifdef MAIN_ALLOW_DOMAIN_LITERALS
    domain_literal:
    debug_print = "R: domain_literal for $local_part@$domain"
    driver = ipliteral
    domains = ! +local_domains
    transport = remote_smtp
    .endif
    hubbed_hosts:
    debug_print = "R: hubbed_hosts for $domain"
    driver = manualroute
    domains = "${if exists{CONFDIR/hubbed_hosts}\
    {partial-lsearch;CONFDIR/hubbed_hosts}\
    fail}"
    same_domain_copy_routing = yes
    route_data = ${lookup{$domain}partial-lsearch{CONFDIR/hubbed_hosts}}
    transport = remote_smtp
    .ifdef DCconfig_internet
    dnslookup_relay_to_domains:
    debug_print = "R: dnslookup_relay_to_domains for $local_part@$domain"
    driver = dnslookup
    domains = ! +local_domains : +relay_to_domains
    transport = remote_smtp
    same_domain_copy_routing = yes
    no_more
    dnslookup:
    debug_print = "R: dnslookup for $local_part@$domain"
    driver = dnslookup
    domains = ! +local_domains
    transport = remote_smtp
    same_domain_copy_routing = yes
    ignore_target_hosts = 0.0.0.0 : 127.0.0.0/8 : 192.168.0.0/16 :\
    172.16.0.0/12 : 10.0.0.0/8 : 169.254.0.0/16 :\
    255.255.255.255
    no_more
    .endif
    .ifdef DCconfig_local
    nonlocal:
    debug_print = "R: nonlocal for $local_part@$domain"
    driver = redirect
    domains = ! +local_domains
    allow_fail
    data = :fail: Mailing to remote domains not supported
    no_more
    .endif
    .ifdef DCconfig_smarthost DCconfig_satellite
    smarthost:
    debug_print = "R: smarthost for $local_part@$domain"
    driver = manualroute
    domains = ! +local_domains
    transport = remote_smtp_smarthost
    route_list = * DCsmarthost byname
    host_find_failed = defer
    same_domain_copy_routing = yes
    no_more
    .endif
    COND_LOCAL_SUBMITTER = "\
    ${if match_ip{$sender_host_address}{:@[]}\
    {1}{0}\
    real_local:
    debug_print = "R: real_local for $local_part@$domain"
    driver = accept
    domains = +local_domains
    condition = COND_LOCAL_SUBMITTER
    local_part_prefix = real-
    check_local_user
    transport = LOCAL_DELIVERY
    vdom_aliases:
    driver = redirect
    allow_defer
    allow_fail
    domains = dsearch;/etc/mail/virtual.d
    data = ${expand:${lookup{$local_part}lsearch*@{/etc/mail/virtual.d/$domain}}}
    retry_use_local_part
    pipe_transport = address_pipe
    file_transport = address_file
    no_more
    system_aliases:
    debug_print = "R: system_aliases for $local_part@$domain"
    driver = redirect
    domains = +local_domains
    allow_fail
    allow_defer
    data = ${lookup{$local_part}lsearch{/etc/aliases}}
    .ifdef SYSTEM_ALIASES_USER
    user = SYSTEM_ALIASES_USER
    .endif
    .ifdef SYSTEM_ALIASES_GROUP
    group = SYSTEM_ALIASES_GROUP
    .endif
    .ifdef SYSTEM_ALIASES_FILE_TRANSPORT
    file_transport = SYSTEM_ALIASES_FILE_TRANSPORT
    .endif
    .ifdef SYSTEM_ALIASES_PIPE_TRANSPORT
    pipe_transport = SYSTEM_ALIASES_PIPE_TRANSPORT
    .endif
    .ifdef SYSTEM_ALIASES_DIRECTORY_TRANSPORT
    directory_transport = SYSTEM_ALIASES_DIRECTORY_TRANSPORT
    .endif
    .ifdef DCconfig_satellite
    hub_user:
    debug_print = "R: hub_user for $local_part@$domain"
    driver = redirect
    domains = +local_domains
    data = ${local_part}@DCreadhost
    check_local_user
    hub_user_smarthost:
    debug_print = "R: hub_user_smarthost for $local_part@$domain"
    driver = manualroute
    domains = DCreadhost
    transport = remote_smtp_smarthost
    route_list = * DCsmarthost byname
    host_find_failed = defer
    same_domain_copy_routing = yes
    check_local_user
    .endif
    userforward:
    debug_print = "R: userforward for $local_part@$domain"
    driver = redirect
    domains = +local_domains
    check_local_user
    file = $home/.forward
    require_files = $local_part:$home/.forward
    no_verify
    no_expn
    check_ancestor
    allow_filter
    forbid_smtp_code = true
    directory_transport = address_directory
    file_transport = address_file
    pipe_transport = address_pipe
    reply_transport = address_reply
    skip_syntax_errors
    syntax_errors_to = real-$local_part@$domain
    syntax_errors_text = \
    This is an automatically generated message. An error has\n\
    been found in your .forward file. Details of the error are\n\
    reported below. While this error persists, you will receive\n\
    a copy of this message for every message that is addressed\n\
    to you. If your .forward file is a filter file, or if it is\n\
    a non-filter file containing no valid forwarding addresses,\n\
    a copy of each incoming message will be put in your normal\n\
    mailbox. If a non-filter file contains at least one valid\n\
    forwarding address, forwarding to the valid addresses will\n\
    happen, and those will be the only deliveries that occur.
    procmail:
    debug_print = "R: procmail for $local_part@$domain"
    driver = accept
    domains = +local_domains
    check_local_user
    transport = procmail_pipe
    require_files = ${local_part}:\
    ${if exists{/etc/procmailrc}\
    {/etc/procmailrc}{${home}/.procmailrc}}:\
    +/usr/bin/procmail
    no_verify
    no_expn
    maildrop:
    debug_print = "R: maildrop for $local_part@$domain"
    driver = accept
    domains = +local_domains
    check_local_user
    transport = maildrop_pipe
    require_files = ${local_part}:${home}/.mailfilter:+/usr/bin/maildrop
    no_verify
    no_expn
    .ifndef FIRST_USER_ACCOUNT_UID
    FIRST_USER_ACCOUNT_UID = 0
    .endif
    .ifndef DEFAULT_SYSTEM_ACCOUNT_ALIAS
    DEFAULT_SYSTEM_ACCOUNT_ALIAS = :fail: no mail to system accounts
    .endif
    COND_SYSTEM_USER_AND_REMOTE_SUBMITTER = "\
    ${if and{{! match_ip{$sender_host_address}{:@[]}}\
    {<{$local_user_uid}{FIRST_USER_ACCOUNT_UID}}}\
    {1}{0}\
    lowuid_aliases:
    debug_print = "R: lowuid_aliases for $local_part@$domain (UID $local_user_uid)"
    check_local_user
    driver = redirect
    allow_fail
    domains = +local_domains
    condition = COND_SYSTEM_USER_AND_REMOTE_SUBMITTER
    data = ${if exists{/etc/mail/lowuid-aliases}\
    {${lookup{$local_part}lsearch{/etc/mail/lowuid-aliases}\
    {$value}{DEFAULT_SYSTEM_ACCOUNT_ALIAS}}}{DEFAULT_SYSTEM_ACCOUNT_ALIAS}}
    local_user:
    debug_print = "R: local_user for $local_part@$domain"
    driver = accept
    domains = +local_domains
    check_local_user
    local_parts = ! root
    transport = LOCAL_DELIVERY
    cannot_route_message = Unknown user
    mail4root:
    debug_print = "R: mail4root for $local_part@$domain"
    driver = redirect
    domains = +local_domains
    data = /var/mail/mail
    file_transport = address_file
    local_parts = root
    user = mail
    group = mail
    begin transports
    .ifdef HIDE_MAILNAME
    REMOTE_SMTP_HEADERS_REWRITE=*@+local_domains $1@DCreadhost frs : *@ETC_MAILNAME $1@DCreadhost frs
    REMOTE_SMTP_RETURN_PATH=${if match_domain{$sender_address_domain}{+local_domains}{${sender_address_local_part}@DCreadhost}{${if match_domain{$sender_address_domain}{ETC_MAILNAME}{${sender_address_local_part}@DCreadhost}fail}}}
    .endif
    .ifdef REMOTE_SMTP_HELO_FROM_DNS
    REMOTE_SMTP_HELO_DATA=${lookup dnsdb {ptr=$sending_ip_address}{$value}{$primary_hostname}}
    .endif
    address_file:
    debug_print = "T: address_file for $local_part@$domain"
    driver = appendfile
    delivery_date_add
    envelope_to_add
    return_path_add
    address_pipe:
    debug_print = "T: address_pipe for $local_part@$domain"
    driver = pipe
    return_fail_output
    address_reply:
    debug_print = "T: autoreply for $local_part@$domain"
    driver = autoreply
    mail_spool:
    debug_print = "T: appendfile for $local_part@$domain"
    driver = appendfile
    file = /var/mail/$local_part
    delivery_date_add
    envelope_to_add
    return_path_add
    group = mail
    mode = 0660
    mode_fail_narrower = false
    maildir_home:
    debug_print = "T: maildir_home for $local_part@$domain"
    driver = appendfile
    .ifdef MAILDIR_HOME_MAILDIR_LOCATION
    directory = MAILDIR_HOME_MAILDIR_LOCATION
    .else
    directory = $home/Maildir
    .endif
    .ifdef MAILDIR_HOME_CREATE_DIRECTORY
    create_directory
    .endif
    .ifdef MAILDIR_HOME_CREATE_FILE
    create_file = MAILDIR_HOME_CREATE_FILE
    .endif
    delivery_date_add
    envelope_to_add
    return_path_add
    maildir_format
    .ifdef MAILDIR_HOME_DIRECTORY_MODE
    directory_mode = MAILDIR_HOME_DIRECTORY_MODE
    .else
    directory_mode = 0700
    .endif
    .ifdef MAILDIR_HOME_MODE
    mode = MAILDIR_HOME_MODE
    .else
    mode = 0600
    .endif
    mode_fail_narrower = false
    maildrop_pipe:
    debug_print = "T: maildrop_pipe for $local_part@$domain"
    driver = pipe
    path = "/bin:/usr/bin:/usr/local/bin"
    command = "/usr/bin/maildrop"
    return_path_add
    delivery_date_add
    envelope_to_add
    procmail_pipe:
    debug_print = "T: procmail_pipe for $local_part@$domain"
    driver = pipe
    path = "/bin:/usr/bin:/usr/local/bin"
    command = "/usr/bin/procmail"
    return_path_add
    delivery_date_add
    envelope_to_add
    remote_smtp:
    debug_print = "T: remote_smtp for $local_part@$domain"
    driver = smtp
    .ifdef REMOTE_SMTP_HOSTS_AVOID_TLS
    hosts_avoid_tls = REMOTE_SMTP_HOSTS_AVOID_TLS
    .endif
    .ifdef REMOTE_SMTP_HEADERS_REWRITE
    headers_rewrite = REMOTE_SMTP_HEADERS_REWRITE
    .endif
    .ifdef REMOTE_SMTP_RETURN_PATH
    return_path = REMOTE_SMTP_RETURN_PATH
    .endif
    .ifdef REMOTE_SMTP_HELO_FROM_DNS
    helo_data=REMOTE_SMTP_HELO_DATA
    .endif
    remote_smtp_smarthost:
    debug_print = "T: remote_smtp_smarthost for $local_part@$domain"
    driver = smtp
    hosts_try_auth = <; ${if exists{CONFDIR/passwd.client} \
    ${lookup{$host}nwildlsearch{CONFDIR/passwd.client}{$host_address}}\
    .ifdef REMOTE_SMTP_SMARTHOST_HOSTS_AVOID_TLS
    hosts_avoid_tls = REMOTE_SMTP_SMARTHOST_HOSTS_AVOID_TLS
    .endif
    .ifdef REMOTE_SMTP_HEADERS_REWRITE
    headers_rewrite = REMOTE_SMTP_HEADERS_REWRITE
    .endif
    .ifdef REMOTE_SMTP_RETURN_PATH
    return_path = REMOTE_SMTP_RETURN_PATH
    .endif
    .ifdef REMOTE_SMTP_HELO_FROM_DNS
    helo_data=REMOTE_SMTP_HELO_DATA
    .endif
    address_directory:
    debug_print = "T: address_directory for $local_part@$domain"
    driver = appendfile
    delivery_date_add
    envelope_to_add
    return_path_add
    check_string = ""
    escape_string = ""
    maildir_format
    begin retry
    * * F,2h,15m; G,16h,1h,1.5; F,4d,6h
    begin rewrite
    .ifndef NO_EAA_REWRITE_REWRITE
    *@+local_domains "${lookup{${local_part}}lsearch{/etc/email-addresses}\
    {$value}fail}" Ffrs
    *@ETC_MAILNAME "${lookup{${local_part}}lsearch{/etc/email-addresses}\
    {$value}fail}" Ffrs
    .endif
    begin authenticators
    login_saslauthd_server:
    driver = plaintext
    public_name = LOGIN
    server_prompts = "Username:: : Password::"
    server_condition = ${if saslauthd{{$auth1}{$auth2}}{1}{0}}
    server_set_id = $auth1
    .ifndef AUTH_SERVER_ALLOW_NOTLS_PASSWORDS
    server_advertise_condition = ${if eq{$tls_cipher}{}{}{*}}
    .endif
    cram_md5:
    driver = cram_md5
    public_name = CRAM-MD5
    client_name = ${extract{1}{:}{${lookup{$host}nwildlsearch{CONFDIR/passwd.client}{$value}fail}}}
    client_secret = ${extract{2}{:}{${lookup{$host}nwildlsearch{CONFDIR/passwd.client}{$value}fail}}}
    PASSWDLINE=${sg{\
    ${lookup{$host}nwildlsearch{CONFDIR/passwd.client}{$value}fail}\
    {\\N[\\^]\\N}\
    {^^}\
    plain:
    driver = plaintext
    public_name = PLAIN
    .ifndef AUTH_CLIENT_ALLOW_NOTLS_PASSWORDS
    client_send = "<; ${if !eq{$tls_cipher}{}\
    {^${extract{1}{:}{PASSWDLINE}}\
    ^${sg{PASSWDLINE}{\\N([^:]+:)(.*)\\N}{\\$2}}\
    }fail}"
    .else
    client_send = "<; ^${extract{1}{:}{PASSWDLINE}}\
    ^${sg{PASSWDLINE}{\\N([^:]+:)(.*)\\N}{\\$2}}"
    .endif
    login:
    driver = plaintext
    public_name = LOGIN
    .ifndef AUTH_CLIENT_ALLOW_NOTLS_PASSWORDS
    client_send = "<; ${if and{\
    {!eq{$tls_cipher}{}}\
    {!eq{PASSWDLINE}{}}\
    {}fail}\
    ; ${extract{1}{::}{PASSWDLINE}}\
    ; ${sg{PASSWDLINE}{\\N([^:]+:)(.*)\\N}{\\$2}}"
    .else
    client_send = "<; ${if !eq{PASSWDLINE}{}\
    {}fail}\
    ; ${extract{1}{::}{PASSWDLINE}}\
    ; ${sg{PASSWDLINE}{\\N([^:]+:)(.*)\\N}{\\$2}}"
    .endif
    plain_server:
    driver = plaintext
    public_name = PLAIN
    server_condition = "${if crypteq{$auth3}{${extract{1}{:}{${lookup{$auth2}lsearch{CONFDIR/passwd}{$value}{*:*}}}}}{1}{0}}"
    server_set_id = $auth2
    server_prompts = :
    .ifndef AUTH_SERVER_ALLOW_NOTLS_PASSWORDS
    server_advertise_condition = ${if eq{$tls_cipher}{}{}{*}}
    .endif
    update-exim4.conf.conf
    dc_eximconfig_configtype='internet'
    dc_other_hostnames='mail.mydomain.com; mail;localhost.localdomain; localhost'
    dc_local_interfaces=''
    dc_readhost=''
    dc_relay_domains=''
    dc_minimaldns='false'
    # HOSTS THAT CAN CONNECT NO MATTER WHAT
    dc_relay_nets='10.0.1.0/24;10.0.0.0/24'
    #xxx.xxx.xxx.xxx is the the Internet IP Address
    dc_smarthost='xxx.xxx.xxx.xxx'
    CFILEMODE='644'
    dc_use_split_config='false'
    dc_hide_mailname=''
    dc_mailname_in_oh='true'
    dc_localdelivery='maildir_home'
    #dc_localdelivery='maildir_home'
    In Debian it seem that update-exim4.conf.conf get load before exim.conf and use what is declared  on update-exim4.conf.conf for exim.conf. How can i do the same thing in Arch ?
    Any help would be much appreciated.

    what is the correct way to add/remove a program from startup at kde4?
    I'm not sure this is the correct way, but it worked for me for starting up yakuake on KDE4's startup. 
    1) Open Konqueror
    2) Go to <<user home>>/.kde4/share/autostart/
    3) Right Click > Create New > Link to Application
    4) You can type in the name (if you know it) or click the icon and do a search for the app name

  • Inputstream.java.io.IOException  ,  applet connection

    I'm working on a problem with the failure of a java
    applet connection to a java servlet.
    The connection is via the internet, and over port 80.
    the java console loggin reports the following
    There was an attempt to redirect a url request,
    but the attempt was not allowed by the client. IOException caught in run
    could some one let me know what the URL re-direction is here,
    much apreciated,
    slainte

    I have often found this problem with inexperts java programmers.
    I could tell you better luck next time, but today I feel generous, so I will answer.
    There is a redirect domain problem. When you try to connect the site you receive an ICMP error message, which is the responsable of the error message you can see. That occurs because the URL connects to another URL different (surely because its original URL has changed to another) and you only have to discover the new URL, and try to connect to it.

  • 5760 guest network not receiving IP address

    I'm testing a pair of 5760s for a near-term production rollout.  I have the dot1x employee wlan working, but am having trouble with the guest web-auth wlan.  We have a foreign controller with connected APs and an anchor controller in the DMZ.  We're using an external redirect to the ISE guest portal.  ISE is working with our production equipment and hasn't been changed.  However, I'm not able to get an IP address assignment to test the ISE redirect.  When I remove all of the web-auth configuration, I'm getting an IP address without issues.  My configuration is attached below, and would appreciate an extra set of eyes.
    !! Anchor controller
    aaa group server radius ISE
     server name iseservername
    aaa authentication login ISE-MethodList group ISE
    parameter-map type webauth global
     type webauth
     virtual-ip ipv4 x.x.127.1 virtual-host guest-redirect.domain.com
    parameter-map type webauth Guest-param-map
     type webauth
     redirect for-login https://guestportal.domain.com:8443/guestportal/portal.jsp
     redirect portal ipv4 x.x.164.35
    ip access-list extended Guest-preauth
     permit udp any any eq domain
     permit udp any eq domain any
     permit udp any any range bootps bootpc
     permit tcp any any eq 8443
     permit tcp any any established
    ip access-list extended Guest-redirect-acl
     permit tcp any any eq www
    radius server iseservername
     address ipv4 x.x.164.35 auth-port 1812 acct-port 1813
     key [verysecretkey]
    wlan Guest 1 Guest
     client vlan 330
     ip access-group web Guest-preauth
     mobility anchor
     no security wpa
     no security wpa akm dot1x
     no security wpa wpa2
     no security wpa wpa2 ciphers aes
     security web-auth
     security web-auth authentication-list ISE-MethodList
     security web-auth parameter-map Guest-param-map
     no shutdown
    !! Foreign Controller
    wireless management interface Vlan60
    wlan Guest 1 Guest 1
     client vlan 60
     mobility anchor x.x.60.160
     no security wpa
     no security wpa akm dot1x
     no security wpa wpa2
     no security wpa wpa2 ciphers aes
     security web-auth
     no shutdown

    Have you tried this by enabling DHCP snooping for the vlan 330 on your 5760  & trust 5760 uplink ? In the below I have assume 10G port of 5760 is map to a etherchannel (Po1). Otherwise trust the physical interface.
    ip dhcp snooping
    ip dhcp snooping vlan 330
    interface Port-channel x
     switchport trunk native vlan x
     switchport trunk allowed vlan x,y,z
     switchport mode trunk
     ip dhcp snooping trust
    HTH
    Rasika
    **** Pls rate all useful responses ****

  • CSS Load Balancing

    I am new to CSS. I have CSS 1150 with IOS 7.3. I want to load balancing two servers 192.168.210.55 and 192.168.210.56 on port 80.
    My CSS is connected in single arm configuration. Core switch is dong the Inter VLAN routing and CSS is connected in the VLAN 200 access Port.
    Servers and CSS are connected to same Layer 3 switch.
    CSS is in VLAN 200  (192.168.200.10)
    Servers are in VLAN 210
    Below is the configuration of my CSS
    ================================================================================
    CSS11501(config)# show run
    !Generated on 04/03/2011 16:47:41
    !Active version: sg0730106
    configure
    !*************************** GLOBAL ***************************
      username net des-password xxxxxx superuser
      logging subsystem flowmgr level debug-7
      logging disk log.log
      ip route 0.0.0.0 0.0.0.0 192.168.200.1 1
    !************************* INTERFACE *************************
    interface e1
      phy 100Mbits-FD
      bridge port-fast enable
      bridge vlan 2
    interface e2
      bridge vlan 2
      bridge port-fast enable
      phy 100Mbits-FD
    interface e4
      bridge port-fast enable
      phy 100Mbits-FD
    interface e8
      bridge port-fast enable
      phy 100Mbits-FD
    !************************** CIRCUIT **************************
    circuit VLAN1
      ip address 192.168.200.10 255.255.255.0
    !************************** SERVICE **************************
    service Citrix_Xenapp
      ip address 192.168.210.55
      keepalive port 80
      active
    service Citrix_Xenapp_2
      ip address 192.168.210.56
      keepalive port 80
      active
    !*************************** OWNER ***************************
    owner ENOC_Citrix_XENAPP
      content Citrix_XENAPP
        add service Citrix_Xenapp
        add service Citrix_Xenapp_2
        vip address 192.168.200.52
        protocol tcp
        port 80
        active
    CSS11501(config)# show service
    Services (3 entries):
    Name: Citrix_Xenapp     Index: 0    
      Type: Local            State: Alive
      Rule ( 192.168.210.55  ANY  ANY )
      Session Redundancy: Disabled
      Redirect Domain: 
      Redirect String: 
      Keepalive: (ICMP   5   3   5 )
      Last Clearing of Stats Counters: 04/03/2011 16:38:49
      Mtu:                       1500        State Transitions:            14
      Total Local Connections:   0           Total Backup Connections:     0
      Current Local Connections: 0           Current Backup Connections:   0
      Total Connections:         0           Max Connections:              65534
      Total Reused Conns:        0        
      Weight:                    1           Load:                         2
      DFP:                       Disable   
    Name: Citrix_Xenapp_2   Index: 6    
      Type: Local            State: Alive
      Rule ( 192.168.210.56  ANY  ANY )
      Session Redundancy: Disabled
      Redirect Domain: 
      Redirect String: 
      Keepalive: (ICMP   5   3   5 )
      Last Clearing of Stats Counters: 04/03/2011 16:39:40
      Mtu:                       1500        State Transitions:            12
      Total Local Connections:   1           Total Backup Connections:     0
      Current Local Connections: 0           Current Backup Connections:   0
      Total Connections:         1           Max Connections:              65534
      Total Reused Conns:        0        
      Weight:                    1           Load:                         2
      DFP:                       Disable   
    CSS11501(config)# sh version
    Version:               sg0730106 (07.30.1.06)
    Flash (Locked):        07.20.2.06
    Flash (Operational):   07.30.1.06
    Type:                  PRIMARY
    Licensed Cmd Set(s):   Standard Feature Set
    CSS11501(config)# sh run
    !Generated on 04/03/2011 17:39:46
    !Active version: sg0730106
    configure
    !*************************** GLOBAL ***************************
      username net des-password xxxxx superuser
      logging subsystem flowmgr level debug-7
      logging disk log.log
      ip route 0.0.0.0 0.0.0.0 192.168.200.1 1
    !************************* INTERFACE *************************
    interface e1
      phy 100Mbits-FD
      bridge port-fast enable
      bridge vlan 2
    interface e2
      bridge vlan 2
      bridge port-fast enable
      phy 100Mbits-FD
    interface e4
      bridge port-fast enable
      phy 100Mbits-FD
    interface e8
      bridge port-fast enable
      phy 100Mbits-FD
    !************************** CIRCUIT **************************
    circuit VLAN1
      ip address 192.168.200.10 255.255.255.0
    !************************** SERVICE **************************
    service Citrix_Xenapp
      ip address 192.168.210.55
      keepalive port 80
      active
    service Citrix_Xenapp_2
      ip address 192.168.210.56
      keepalive port 80
      active
    !*************************** OWNER ***************************
    owner ENOC_Citrix_XENAPP
      content Citrix_XENAPP
        add service Citrix_Xenapp
        add service Citrix_Xenapp_2
        vip address 192.168.200.52
        protocol tcp
        port 80
        active
    CSS11501(config)#  show service
    Services (3 entries):
    Name: Citrix_Xenapp     Index: 0    
      Type: Local            State: Alive
      Rule ( 192.168.210.55  ANY  ANY )
      Session Redundancy: Disabled
      Redirect Domain: 
      Redirect String: 
      Keepalive: (ICMP   5   3   5 )
      Last Clearing of Stats Counters: 04/03/2011 16:38:49
      Mtu:                       1500        State Transitions:            14
      Total Local Connections:   0           Total Backup Connections:     0
      Current Local Connections: 0           Current Backup Connections:   0
      Total Connections:         0           Max Connections:              65534
      Total Reused Conns:        0        
      Weight:                    1           Load:                         2
      DFP:                       Disable   
    Name: Citrix_Xenapp_2   Index: 6    
      Type: Local            State: Alive
      Rule ( 192.168.210.56  ANY  ANY )
      Session Redundancy: Disabled
      Redirect Domain: 
      Redirect String: 
      Keepalive: (ICMP   5   3   5 )
      Last Clearing of Stats Counters: 04/03/2011 16:39:40
      Mtu:                       1500        State Transitions:            12
      Total Local Connections:   1           Total Backup Connections:     0
      Current Local Connections: 0           Current Backup Connections:   0
      Total Connections:         1           Max Connections:              65534
      Total Reused Conns:        0        
      Weight:                    1           Load:                         2
      DFP:                       Disable   
    CSS11501(config)# show content
    Content Database:
       Pieces of content for module: 1
                       Total Content: 56
    CSS11501(config)# show owner
    Owner Configuration:
    Name:           ENOC_Citrix_XENAPP
    Billing Info: 
    Address:      
    Email Address:
    DNS Policy:     none
    Case Matching:  Insensitive
    CSS11501(config)# show owner ?
      <cr>                Execute command
      ENOC_Citrix_XENAPP
    CSS11501(config)# show owner ENOC_Citrix_XENAPP ?
      <cr>                Execute command
      statistics          Show owner statistical information
    CSS11501(config)# show owner ENOC_Citrix_XENAPP
    Owner Configuration:
    Name:           ENOC_Citrix_XENAPP
    Billing Info: 
    Address:      
    Email Address:
    DNS Policy:     none
    Case Matching:  Insensitive
    CSS11501(config)# show owner ENOC_Citrix_XENAPP statistics
    Owner Statistics for <ENOC_Citrix_XENAPP>:
    DNS Policy:                        None  Case Sensitivity:                   Off
    Hits:                                 1  Reject Overload:                      0
    Bytes:                               52  Reject No Services                    0
    Frames:                               1  Drops                                 0
    Redirects                             0  NAT Translations:                     0
    Spoofs:                               0
    CSS11501(config)#
    The load balaning IP is 192.168.200.52 but I cant ping this virtual IP and cant telnet on port 80 on this IP address.
    CSS11501(config)# ping 192.168.205.55
    Pinging 192.168.205.55 1 time(s)...
    Working(-) 0/1
    0% Success.
    %% Ping Failure
    CSS11501(config)# ping 192.168.210.55
    Pinging 192.168.210.55 1 time(s)...
    Working(-) 1/1
    100% Success.
    CSS11501(config)# ping 192.168.210.56
    Pinging 192.168.210.56 1 time(s)...
    Working(-) 1/1
    100% Success.
    CSS11501(config)# ping 192.168.210.1
    Pinging 192.168.210.1 1 time(s)...
    Working(-) 1/1
    100% Success.
    CSS11501(config)# ping 192.168.200.1
    Pinging 192.168.200.1 1 time(s)...
    Working(-) 1/1
    100% Success.
    Network connectivity is there. Please let me know what I am missing and how to solve this problem.
    Thanks in advance.

    Thanks for the reply, But I have modified my configuration. Now I am load balancing VLAN 200 Servers where the CSS also located in the same VLAN. Attach is the updated configuration.
    I can only ping the VIP but not able to telnet on VIP (192.168.200.65 80).
    configure
    !*************************** GLOBAL ***************************
      username net des-password net@dmin superuser
      no restrict web-mgmt
      logging subsystem flowmgr level debug-7
      logging disk log.log
      ip route 0.0.0.0 0.0.0.0 192.168.200.1 1
    !************************* INTERFACE *************************
    interface e1
      phy 100Mbits-FD
      bridge port-fast enable
      bridge vlan 2
    interface e2
      bridge vlan 2
      bridge port-fast enable
      phy 100Mbits-FD
    interface e4
      bridge port-fast enable
      phy 100Mbits-FD
    interface e8
      bridge port-fast enable
      phy 100Mbits-FD
    !************************** CIRCUIT **************************
    circuit VLAN1
      ip address 192.168.200.10 255.255.255.0
    !************************** SERVICE **************************
    service Citrix_Xenapp
      ip address 192.168.210.55
      keepalive port 80
      active
    service Citrix_Xenapp_2
      ip address 192.168.210.56
      keepalive port 80
      active
    service ENOC_EFAX_1
      ip address 192.168.200.66
      keepalive type none
      protocol tcp
      port 80
      active
    service ENOC_EFAX_2
      ip address 192.168.200.67
      keepalive type none
      port 80
      protocol tcp
      active
    !*************************** OWNER ***************************
    owner ENOC_Citrix_XENAPP
      content Citrix_XENAPP
        add service Citrix_Xenapp
        add service Citrix_Xenapp_2
        vip address 192.168.200.52
        protocol tcp
        port 80
        active
    owner ENOC_EFAX
      content EFAX
        add service ENOC_EFAX_2
        add service ENOC_EFAX_1
        vip address 192.168.200.65
        protocol tcp
        port 80
        active
    !*************************** GROUP ***************************
    group EFAX
      vip address 192.168.200.65
      add service ENOC_EFAX_1
      add service ENOC_EFAX_2
      active
    =====================
    CSS11501(config)# show flow
      flow-timeout        Display flow-timeout values.
      flows               Show flow summary information
    CSS11501(config)# show flow 0.0.0.0
                           ^
    %% Invalid input detected at '^' marker.
    CSS11501(config)# show flows 0.0.0.0
    Src Address     SPort Dst Address     DPort NAT Dst Address Prt InPort  OutPort
    192.168.80.89   4567  192.168.200.65  80    192.168.200.67  TCP e8        e8
    192.168.200.67  80    192.168.80.89   4567  192.168.80.89   TCP e8        e8
    192.168.80.89   2474  192.168.200.10  23    0.0.0.0         TCP e8        Ipv4
    CSS11501(config)# show service
    Services (5 entries):
    Name: Citrix_Xenapp     Index: 0    
      Type: Local            State: Alive
      Rule ( 192.168.210.55  ANY  ANY )
      Session Redundancy: Disabled
      Redirect Domain: 
      Redirect String: 
      Keepalive: (ICMP   5   3   5 )
      Last Clearing of Stats Counters: 04/04/2011 21:57:17
      Mtu:                       1500        State Transitions:            0
      Total Local Connections:   0           Total Backup Connections:     0
      Current Local Connections: 0           Current Backup Connections:   0
      Total Connections:         0           Max Connections:              65534
      Total Reused Conns:        0        
      Weight:                    1           Load:                         2
      DFP:                       Disable   
    Name: Citrix_Xenapp_2   Index: 6    
      Type: Local            State: Alive
      Rule ( 192.168.210.56  ANY  ANY )
      Session Redundancy: Disabled
      Redirect Domain: 
      Redirect String: 
      Keepalive: (ICMP   5   3   5 )
      Last Clearing of Stats Counters: 04/04/2011 21:57:17
      Mtu:                       1500        State Transitions:            0
      Total Local Connections:   0           Total Backup Connections:     0
      Current Local Connections: 0           Current Backup Connections:   0
      Total Connections:         0           Max Connections:              65534
      Total Reused Conns:        0        
      Weight:                    1           Load:                         2
      DFP:                       Disable   
    Name: ENOC_EFAX_1       Index: 1    
      Type: Local            State: Alive
      Rule ( 192.168.200.66  TCP  80 )
      Session Redundancy: Disabled
      Redirect Domain: 
      Redirect String: 
      Keepalive: (NONE   5   3   5 )
      Last Clearing of Stats Counters: 04/04/2011 21:57:17
      Mtu:                       1500        State Transitions:            0
      Total Local Connections:   1           Total Backup Connections:     0
      Current Local Connections: 0           Current Backup Connections:   0
      Total Connections:         1           Max Connections:              65534
      Total Reused Conns:        0        
      Weight:                    1           Load:                         2
      DFP:                       Disable   
    Name: ENOC_EFAX_2       Index: 2    
      Type: Local            State: Alive
      Rule ( 192.168.200.67  TCP  80 )
      Session Redundancy: Disabled
      Redirect Domain: 
      Redirect String: 
      Keepalive: (NONE   5   3   5 )
      Last Clearing of Stats Counters: 04/04/2011 21:57:17
      Mtu:                       1500        State Transitions:            0
      Total Local Connections:   2           Total Backup Connections:     0
      Current Local Connections: 1           Current Backup Connections:   0
      Total Connections:         2           Max Connections:              65534
      Total Reused Conns:        0        
      Weight:                    1           Load:                         2
      DFP:                       Disable   
    CSS11501(config)# show service summary
    Service Name                     State     Conn  Weight  Avg   State
                                                             Load  Transitions
    Citrix_Xenapp                    Alive         0      1     2            0
    Citrix_Xenapp_2                  Alive         0      1     2            0
    ENOC_EFAX_1                      Alive         0      1     2            0
    ENOC_EFAX_2                      Alive         1      1     2            0
    CSS11501(config)# show rule
    Content Rules:
    ///\\\  The Duke of Url.
    { O--O }
      [||]
    >>>>>>>>
    Name:                    EFAX   Owner:               ENOC_EFAX
    State:                 Active   Type:                     HTTP
    Balance:          Round Robin   Failover:                  N/A
    Persistence:          Enabled   Param-Bypass:         Disabled
    Session Redundancy:  Disabled
    IP Redundancy:    Not Redundant
    L3:         192.168.200.65
    L4:         TCP/80
    Url:       
    Redirect: ""
    TCP RST client if service unreachable: Disabled
    Rule Services & Weights:
    1: ENOC_EFAX_1-Alive, S-1
    2: ENOC_EFAX_2-Alive, S-1
    >>>>>>>>
    Name:           Citrix_XENAPP   Owner:      ENOC_Citrix_XENAPP
    State:                 Active   Type:                     HTTP
    Balance:          Round Robin   Failover:                  N/A
    Persistence:          Enabled   Param-Bypass:         Disabled
    Session Redundancy:  Disabled
    IP Redundancy:    Not Redundant
    L3:         192.168.200.52
    L4:         TCP/80
    Url:       
    Redirect: ""
    TCP RST client if service unreachable: Disabled
    Rule Services & Weights:
    1: Citrix_Xenapp-Alive, S-1
    2: Citrix_Xenapp_2-Alive, S-1
    CSS11501(config)# show content
    Content Database:
       Pieces of content for module: 1
                       Total Content: 56
    CSS11501(config)# show owner
    Owner Configuration:
    Name:           ENOC_EFAX
    Billing Info: 
    Address:      
    Email Address:
    DNS Policy:     none
    Case Matching:  Insensitive
    Name:           ENOC_Citrix_XENAPP
    Billing Info: 
    Address:      
    Email Address:
    DNS Policy:     none
    Case Matching:  Insensitive
    CSS11501(config)#
    Please let me know what I am missing and also one link is not working.
    To configure source nat you can refer to the following:
    http://www.cisco.com/en/US/partner/docs/app_ntwk_services/data_center_app_services/css11500series/v8.20/configuration/content_lb/guide/SGrp.html

  • ACE class-map match url syntax

    Can someone help me with the string that would match a url with no path specified?  For instance; user types "https://outlook.domain.net" into their browser and I want the ACE to redirect that request to https://outlook.domain.net/owa".
      2 match http url oulook\.domain\.net\

    Adam and Shday,
    I'll give you a hand on this =)
    Adam we can solve your problem only if you're doing SSL offloading on the ACE as the layer 5 information that needs to be checked is being sent encrypted.
    In case SSL termination is configured then the configuration would be like this:
    rserver redirect OWA
      webhost-redirection https://%h/owa 301
      inservice
    serverfarm redirect OWA
      rserver OWA
        inservice
    class-map type http loadbalance match-any OWA
    2 match http header Host header-value "outlook.domain.net"
    policy-map type loadbalance first-match OWA
    class OWA
      serverfarm OWA
    class class-default
      serverfarm Backend
    Shday yours is pretty much the same but you need to decide if class-default needs
    to be in place:
    rserver redirect Domain
    webhost-redirection http://%h/any_path 301
    inservice
    serverfarm redirect Domain
       rserver Domain
         inservice
    class-map type http loadbalance match-any Any
    2 match http url /.*
    class-map type http loadbalance match-any Domain
    2 match http header Host header-value "domain.com"
    policy-map type loadbalance first-match Domain
    class Any
      serverfarm Backend
    class Domain
      serverfarm Domain
    HTH
    Pablo

  • Severe Site Slow-Down with multiple DNS/Sites

    Alright.. this is a bit of a strange situation, any help is appreciated because I'm pretty much out of troubleshooting options.
    Mac OS X Server hosting a few important sites and then several "redirect" sites.
    - A PHP/MySQL system
    - 2 normal PHP/MySQL websites
    - 8 Redirects (domain.bz, domain.biz, domain.name, etc..)
    The redirects are set up like so:
    - A DNS entry with a "www" alias pointing to the local machine.
    - A site with a .html file containing a meta-refresh to domain.com
    The Redirects work just fine when they are enabled, www.domain.biz goes to www.domain.com, etc.. however, the 3 sites that run on the server experience severe slow-down to the point of not even loading.
    Normally the sites are blazingly fast..
    Anyway, if the redirect site entries are disabled, the slow-down disappears.
    As an added oddity.. if Safari is experiencing the slowdown, but I cancel the site load.. the site pulls up missing images/css in varying degrees, depending on when I cancel, so it's like something is "hanging".
    There's nothing apparent in the error logs other than a report that 'there is a mismatch between the domain name and reverse DNS' etc.. 'may cause some services to not work properly'.

    Nevermind, I found the problem.
    The performance cache was enabled for the redirect sites.

  • Bc & Plesk Panel

    Is it possible to offer more than one panel option(one being Bc) to clients from a single website ?
    From a technical/design stand point, what would be the best way to achieve this ?
    example : from 1 website, offer Bc & Plesk 11.
    obviously Plesk cannot integrate into Bc and Bc cannot integrate into Plesk.
    to offer both, both admistration panels would have to be set up on their respective individual servers,
    but the main website would be best set up to offer both services on Plesk or Bc and how in God's good name would this be achieved,
    without redirecting domain names when client chooses either service ? people get "bommy" when they are redirected or see a different domain name when making any sort or purchase.
    i hope i have explained myself clearly.
    even if this forum is not suited for a suitable solution,
    may someone please point me in a suitable direction ?
    & obviously i will have to post the same on "Parallels" forum.
    Any kind assistance in this would be greatly appreciated.
    Kind regards,
    RC.

    much appreciated.
    i actually did contact bcgurus directly but they referred me to their forums, which i shall do soon.
    i cant get much feed back because i guess no one else has the same idea.
    i would like to share my reasons for such implementation if anyone really cares and also i guess for the same reason i cant get much of a response.
    the Bc community (at least the devout followers) seems to me to be pushing a silly "us and them" concept sometimes.
    "Bc vs Wordpress". "its either or". "Bc is an all in one solution", "what good is open source if it does not give you leads" etc. etc. how silly, immature and stupid the human species can be sometimes.
    there are actually people, (millions of market share) that do not need or want a lot of what Bc offers.
    would it not be wise to offer customers a panel solution of their choice ?
    that way, they win and we, the partners, web hosters, designers etc also profit.
    maybe in the future Bc could consider integration options the way cpanel and plesk and many others do.
    depending on our few Bc followers alone to build web apps will not be sufficient for the competition.

Maybe you are looking for