Redirecting LR5 from prime image location to backup location?
I have two 3TB external drives (Drive E & F) running on my PC (Window7), Drive E has all of my images (~60k) and Drive F is used as my backup where I copy over almost all of the files (some are silly images that I don't care if I lose). Drive E just crashed. How do I now redirect LR5 to link up with my backup Drive F? As a side note - I backup my LR settings on my core drive, which is also where LR5 resides. Thanks, bill
One way would be to change the drive letter of F: to E: assuming the path on F: is the same as was on E: aside from the drive letter.
The LR way is to right-click on the top-level folder(s) and choose Locate Missing Folder or whatever the exact phrasing is, nowadays, then browse over to the copy on F:.
Similar Messages
-
Images I move from one folder into another are disappearing, at first it was occurring immediately and only if I did not copy and paste the images. Today however I found out that images I had been using for days just up and vanished from their new location. A few of these images had copies in another folder that remained and the ones I couldn't find may or may not have ever had copies. I had backed up my system with time machine recently as well, so I went into the backup to retreive the lost images. When I searched and found the backup copies I got the error "the file alias cannot be opened because the original cannot be located". The crazy thing is that the images that remained on my computer did not give me the same error and opened like they should.
In short images that I am creating, saving, and using are disapearing so epically that even time machine versions are affected when retrieval is attempted. Any suggestions as to what I could be doing wrong without realizing it? Or perhaps other people have had similar bugs that are software related and have a solution?Hi Kevin,
I understand what you tried to do but it doesn't work that way. Swapping drive names will just mess things up.
You should be able to reconnect the files though: in the Locate Referenced Files dialog make sure you click the Show Reconnect Options button — this will give you access to all the connected drives. Locate one of the files and hit Reconnect All. Should do the trick.
Best -
I hope there has been found a more efficiant solution for this, how can I restore a single image from an aperture time machine backup, I really hope I don't have to restore the entire library? that does not make sense
any suggestions?Did you try browsing your backups in the Finder ? That is, do not go and "Enter Time Machine". Instead, navigate to your Time Machine backup via Finder and then manually go to the time period (by folder name) you are looking for ... when you find your Aperture library you can then "Show Package Contents" and find the Master you are looking for.
-
I have about 10000 images of different persons with dimension of 640*480. I wan to crop face from these images to dimension of 200*280. The location of face varies in differnt pics. So, please let me know step by step how can I perform this using the Lightroom software. Also I wan to know what should be the aspect ratio to do so.Thank you in advance
The aspect ratio should be set to 200x280, or equivalently 5x7.
I don't think it is possible to do the cropping automatically in Lightroom, you'd have to do this image by image to crop the faces correctly. -
I get an error message when running a back-up from my Macbook Pro: The backup disk image Macbook.sparsebundle could not be accessed (error-1) and the backup did not complete? What is the issue?
Try Here > http://pondini.org/TM/C12.html
More Info here > http://pondini.org/TM/Time_Capsule.html -
Message from my time capsule"The backup disk image"/volumes/data/bob mertie's imacsparse bundle could not be accessed" Any help?
Welcome to Apple Support Communities
There are different reasons for that error. Read > http://pondini.org/TM/C17.html -
Prime Infrastructure 2.1 Image Location
I am trying to setup PI to auto deploy routers. I think I have things configured correctly? I am running into a snag with the image deployment, the router boots and gets the CNS config. In the plug and play status i get an error "Image activation failed", with the details showing "Image destination filesystem does not exist"? I am assuming this has something to do with the plug and play profile and the Image Location setting?
I changed the location to blank and now I get this error:
The Inventory status is FAIL. Response with Error Code(AUTHENTICATION FAILURE) and additional info(AUTHENTICATION_FAILURE (Errcode=CNS_AUTHENTICATION_FAILED Info=not allowed to use that server url)). -
LR5 and external image editing.
When editing an image or images in an external editor, such as CS5, OnOne, Nik, etc, LR5 places the images (when it works) at the end of the image sequence instead of where the origonal image came from and stacking the edited images with it. This is different than LR3 or LR4. LR5 does not seem to play well with Nik software either. After editing three images in Nik DHR Efex Pro 2 the saved image did not reapear in LR5. This was never a problem in LR4. Is there some 'tweeking' that needs to be done in LR5??
I expect that your Sort Order just needs to be changed, in order to always put the edited images next to the originals they are based on.
For example, if you sort by Capture time they will appear together - because the information about what date / time the shutter fired, is the same for all derived versions (external edit copies, virtual copies included). If you sort by date added, or date edited, then the Filmstrip and Grid view will reflect the working sequence instead.
Sorting options are on the Toolbar at the bottom of the Grid screen (above the filmstrip), press T if that is not showing. If sorting does not show up on the Toolbar, enable that using the arrow at the right hand end of the Toolbar strip.
When you edit an image into (e.g.) a Nik utility, this is basically the same as when you send an image to any other external editor: you will need to save your work to the filename that Lightroom has defined, and which LR is therefore "watching", in order for the changes made to appear back in LR.
If you fail to save into the filename which LR is aware of, your work will not appear there - and if you save into a file LR is not aware of, then it will... be unaware of that (grin)..
The only situation AFAIK where LR is going to pick up on some other ad-hoc filename and location, is when you edit into Photoshop via a compatible ACR version. In this case (only) the two products go into a specially-scripted interaction, where the image is seen at first in a "not yet saved" state, with LR kept specially "in the loop" as to what then happens - either saving the edit to a file, or else cancelling and discarding the edit.
One way to distinguish when PS is working in this specially-compatible way, rather than in the more usual way described above, is that your document window will be titled something like "document1", while an image is (so far) unsaved. But I would not expect to ever see this when a third-party utility or plugin is used. -
Acces images located on a static web applications
HI everybody,
I need to put images and html pages on IBM http server, I've created for that a web static application that I've deployed on the http server. I have also a dynamic web appliocation running on websphere 6 where I've puted all my jsp and servlets. I've instaled the IBM http plugin and both servers seems to be communicating correctly.
my first question is: what is the best practices to access the images located on the webserver from my jsp files, I dont like the idea to use the full url:http://webserverIPAdress:port/staticContext/imagesFolder, is there a way to map the images folder path in my websphere application, or to tell the jsp page to go to the http server to lokup the image?????
The second questions , do I need to do somethig to manage the redirection of the users requests: I'm planing to make my webserver as the front facade, I mean if a user asks for html page he will get it from the http webserver, but if he is requestiong a servlet how the request would be redirected to the websphere application????
regarding the plugin if alredy installed it and i have performed the snoopServlets test comming with the IBM http server documention , it seems to be working fine, it means that both servers communicate well. so what the convenience of generation plugin functionality which is on the sever page on the websphere admin console????, do I need to that also???
any kind of help would be appriciated , as you see I'm new with IBM servers.HI everybody,
I need to put images and html pages on IBM http server, I've created for that a web static application that I've deployed on the http server. I have also a dynamic web appliocation running on websphere 6 where I've puted all my jsp and servlets. I've instaled the IBM http plugin and both servers seems to be communicating correctly.
my first question is: what is the best practices to access the images located on the webserver from my jsp files, I dont like the idea to use the full url:http://webserverIPAdress:port/staticContext/imagesFolder, is there a way to map the images folder path in my websphere application, or to tell the jsp page to go to the http server to lokup the image?????
The second questions , do I need to do somethig to manage the redirection of the users requests: I'm planing to make my webserver as the front facade, I mean if a user asks for html page he will get it from the http webserver, but if he is requestiong a servlet how the request would be redirected to the websphere application????
regarding the plugin if alredy installed it and i have performed the snoopServlets test comming with the IBM http server documention , it seems to be working fine, it means that both servers communicate well. so what the convenience of generation plugin functionality which is on the sever page on the websphere admin console????, do I need to that also???
any kind of help would be appriciated , as you see I'm new with IBM servers. -
I need helping configuring RDP access to my local server from a remote location on my Cisco ASA 5505 Firewall.
I have attempted to configure rdp access but it does not seem to be working for me Could I please ask someone to help me modify my current configuration to allow this? Please do step by step as I could use all the help I could get.
I need to allow the following IP addresses to have RDP access to my server:
66.237.238.193-66.237.238.222
69.195.249.177-69.195.249.190
69.65.80.240-69.65.80.249
My external WAN server info is - 99.89.69.333
The internal IP address of my server is - 192.168.6.2
The other server shows up as 99.89.69.334 but is working fine.
I already added one server for Static route and RDP but when I try to put in same commands it doesnt allow me to for this new one. Please take a look at my configuration file and give me the commands i need in order to put this through. Also please tell me if there are any bad/conflicting entries.
THE FOLLOWING IS MY CONFIGURATION FILE
Also I have modified IP information so that its not the ACTUAL ip info for my server/network etc... lol for security reasons of course
Also the bolded lines are the modifications I made but that arent working.
ASA Version 7.2(4)
hostname ciscoasa
domain-name default.domain.invalid
enable password DowJbZ7jrm5Nkm5B encrypted
passwd 2KFQnbNIdI.2KYOU encrypted
names
interface Vlan1
nameif inside
security-level 100
ip address 192.168.6.254 255.255.255.0
interface Vlan2
nameif outside
security-level 0
ip address 99.89.69.233 255.255.255.248
interface Ethernet0/0
switchport access vlan 2
interface Ethernet0/1
interface Ethernet0/2
interface Ethernet0/3
interface Ethernet0/4
interface Ethernet0/5
interface Ethernet0/6
interface Ethernet0/7
ftp mode passive
dns server-group DefaultDNS
domain-name default.domain.invalid
object-group network EMRMC
network-object 10.1.2.0 255.255.255.0
network-object 192.168.10.0 255.255.255.0
network-object 192.168.11.0 255.255.255.0
network-object 172.16.0.0 255.255.0.0
network-object 192.168.9.0 255.255.255.0
object-group service RDP tcp
description RDP
port-object eq 3389
object-group service GMED tcp
description GMED
port-object eq 3390
object-group service MarsAccess tcp
description MarsAccess
port-object range pcanywhere-data 5632
object-group service MarsFTP tcp
description MarsFTP
port-object range ftp-data ftp
object-group service MarsSupportAppls tcp
description MarsSupportAppls
port-object eq 1972
object-group service MarsUpdatePort tcp
description MarsUpdatePort
port-object eq 7835
object-group service NM1503 tcp
description NM1503
port-object eq 1503
object-group service NM1720 tcp
description NM1720
port-object eq h323
object-group service NM1731 tcp
description NM1731
port-object eq 1731
object-group service NM389 tcp
description NM389
port-object eq ldap
object-group service NM522 tcp
description NM522
port-object eq 522
object-group service SSL tcp
description SSL
port-object eq https
object-group service rdp tcp
port-object eq 3389
access-list outside_1_cryptomap extended permit ip 192.168.6.0 255.255.255.0 object-group EMRMC
access-list inside_nat0_outbound extended permit ip 192.168.6.0 255.255.255.0 192.168.0.0 255.255.0.0
access-list inside_nat0_outbound extended permit ip 192.168.6.0 255.255.255.0 object-group EMRMC
access-list outside_access_in extended permit tcp 69.16.158.128 255.255.255.128 host 99.89.69.334 eq pcanywhere-data
access-list outside_access_in extended permit udp 69.16.158.128 255.255.255.128 host 99.89.69.334 eq pcanywhere-status
access-list outside_access_in extended permit tcp 69.16.158.128 255.255.255.128 host 99.89.69.334 object-group RDP
access-list outside_access_in extended permit tcp 69.16.158.128 255.255.255.128 192.168.6.0 255.255.255.0 eq ftp
access-list outside_access_in extended permit tcp 69.16.158.128 255.255.255.128 192.168.6.0 255.255.255.0 eq ldap
access-list outside_access_in extended permit tcp 69.16.158.128 255.255.255.128 192.168.6.0 255.255.255.0 eq h323
access-list outside_access_in extended permit tcp 69.16.158.128 255.255.255.128 192.168.6.0 255.255.255.0 eq telnet
access-list outside_access_in extended permit tcp 69.16.158.128 255.255.255.128 192.168.6.0 255.255.255.0 eq www
access-list outside_access_in extended permit tcp 69.16.158.128 255.255.255.128 host 99.89.69.334 object-group SSL
access-list outside_access_in extended permit tcp 69.16.158.128 255.255.255.128 192.168.6.0 255.255.255.0 object-group NM522
access-list outside_access_in extended permit tcp 69.16.158.128 255.255.255.128 192.168.6.0 255.255.255.0 object-group NM1731
access-list outside_access_in extended permit tcp 173.197.144.48 255.255.255.248 host 99.89.69.334 object-group RDP
access-list outside_access_in extended permit tcp any interface outside eq 3389
access-list outside_access_in extended permit tcp host 66.237.238.194 host 99.89.69.333
access-list outside_access_in extended permit tcp host 66.237.238.194 host 99.89.69.333 object-group rdp
access-list outside_access_in extended permit tcp any host 99.89.69.333 object-group rdp
access-list out_in extended permit tcp any host 192.168.6.2 eq 3389
pager lines 24
logging enable
logging asdm informational
mtu inside 1500
mtu outside 1500
icmp unreachable rate-limit 1 burst-size 1
asdm image disk0:/asdm-524.bin
no asdm history enable
arp timeout 14400
global (outside) 1 interface
nat (inside) 0 access-list inside_nat0_outbound
nat (inside) 1 0.0.0.0 0.0.0.0
static (inside,outside) tcp 99.89.69.334 3389 192.168.6.1 3389 netmask 255.255.255.255
static (inside,outside) tcp interface 3389 192.168.6.2 3389 netmask 255.255.255.255
access-group outside_access_in in interface outside
route outside 0.0.0.0 0.0.0.0 99.89.69.338 1
timeout xlate 3:00:00
timeout conn 1:00:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02
timeout sunrpc 0:10:00 h323 0:05:00 h225 1:00:00 mgcp 0:05:00 mgcp-pat 0:05:00
timeout sip 0:30:00 sip_media 0:02:00 sip-invite 0:03:00 sip-disconnect 0:02:00
timeout sip-provisional-media 0:02:00 uauth 0:05:00 absolute
http server enable
http 192.168.6.0 255.255.255.0 inside
http 0.0.0.0 0.0.0.0 outside
no snmp-server location
no snmp-server contact
snmp-server enable traps snmp authentication linkup linkdown coldstart
crypto ipsec transform-set ESP-3DES-MD5 esp-3des esp-md5-hmac
crypto map outside_map 1 match address outside_1_cryptomap
crypto map outside_map 1 set peer 68.156.148.5
crypto map outside_map 1 set transform-set ESP-3DES-MD5
crypto map outside_map interface outside
crypto isakmp enable outside
crypto isakmp policy 10
authentication pre-share
encryption 3des
hash md5
group 1
lifetime 86400
crypto isakmp policy 30
authentication pre-share
encryption 3des
hash md5
group 2
lifetime 86400
telnet timeout 5
ssh timeout 5
console timeout 0
dhcpd auto_config outside
tunnel-group 68.156.148.5 type ipsec-l2l
tunnel-group 68.156.148.5 ipsec-attributes
pre-shared-key *
class-map inspection_default
match default-inspection-traffic
policy-map type inspect dns preset_dns_map
parameters
message-length maximum 512
policy-map global_policy
class inspection_default
inspect dns preset_dns_map
inspect ftp
inspect h323 h225
inspect h323 ras
inspect rsh
inspect rtsp
inspect esmtp
inspect sqlnet
inspect skinny
inspect sunrpc
inspect sunrpc
inspect xdmcp
inspect sip
inspect netbios
inspect tftp
service-policy global_policy global
prompt hostname context
Cryptochecksum:f47dfb2cf91833f0366ff572eafefb1d
: end
ciscoasa(config-network)#Unclear what did not work. In your original post you include said some commands were added but don't work:
static (inside,outside) tcp interface 3389 192.168.6.2 3389 netmask 255.255.255.255
and later you state you add another command that gets an error:
static (inside,outside) tcp 99.89.69.333 3389 192.168.6.2 3389 netmask 255.255.255.255
You also stated that 99.89.69.333 (actually 99.89.69.233, guessing from the rest of your config and other posts) is your WAN IP address.
The first static statement matches Cisco's documentation, which states that a static statement must use the 'interface' directive when you are trying to do static PAT utilizing the IP address of the interface. Since 99.89.69.333 is the assigned IP address of your WAN interface, that may explain why the second statement fails.
Any reason why you are using static PAT (including the port number 3389) instead of just skipping that directive? Static PAT usually makes sense when you need to change the TCP port number. In your example, you are not changing the TCP port 3389. -
I'm trying a full restore in Lion, but it won't. States that there isn't enough space on the Mac HD. How do I restore everything from a recent Time Machine Backup?
Thanks but I think it has something to do with the 'restore'. in the newest iTunes 11, when I click on the tab "iphone", it redirects me to the "welcome to your new iphone" page and asks about doing a 'restore'. I already did a 'restore', but it went to the original factory settings and I want to 'restore' to my lastest back up as of April 12. When I choose that option, it says my iphone doesn't have enough space. I don't know how much I need to delete in order to make it work. I've deleted lots, but it only has 4.1 GB available. I'm not sure why this isn't enough to do a 'restore'. I don't want to delete all my photos and videos, but maybe I will have to?...7.7GB is used up for that. I can't sync or do ANYTHING...
-
Extract Image in thrid-party System using Image Location
Hi All,
I am working in an Interface project. I need your help in one of the requirement.
The data will flow from third-party system as an XML file and we are using Webservice to extract the data.
The requirement is the third-party system will send the image location in the XML file and we need to extract the Image stored in the third-party system using that Image Location.
Is this feasible and if so how?
With Regards,
GurulakshmiHi,
No. We will store the image in Livelink(Third-party Storage Location) and attach that image against SAP Notifications which is created using T.code: IW21
With Regards,
Gurulakshmi -
Removing keywords from multiple images when the keyword isn't in the list?
So, I know that the method for removing a keyword from multiple images is to select the images, type the keyword in the inspector and press Shift-Return.
However, that doesn't seem to work if the keyword I want to remove is not in the keyword database (i.e. it's not in the keyword HUD).
For example, I deleted the iPhoto keyword group from the keyword HUD because I decided I didn't like that. I've got a bunch of photos that still have keywords like "Beach (iPhoto)". Typing "Beach" Shift-Return does nothing. Typing "Beach (iPhoto)" Shift-Return does nothing.
Adding an iPhoto group back to the HUD and a child keyword of Beach and then Typing "Beach" Shift-Return works, but I can't believe that's how it's supposed to work.
Is that the only way to do this? I've got a lot of those old iPhoto keywords to remove and that's going to be a major pain... there must be a better way.
PowerMac Dual G5 2.0 Mac OS X (10.4.6)I don't know if this will help you or not but it contains the roots of what you would need to script the removal of unwanted and unlisted keywords.
-- script begins
tell application "Aperture"
-- set the target to the "Smart beetles" album at the top level of the library.
tell album "Smart beetles" of folder ""
-- get a list of the images in the album.
set x to every image version
-- move through the images one by one, deleting and creating the appropriate keywords
repeat with i from 1 to x's length
tell x's item i
-- Note. if the keyword is top level, then the parents value is "".
delete (every keyword whose name is "Australia" and parents is "Location")
make new keyword with properties {name:"Sydney", parents:"Location"}
end tell
end repeat
end tell
end tell
-- script ends -
Problem with image location when converting word document to pdf
Hello all,
I am new to all this and this question may be already answered, but when I try to convert a word (2003-2007) document containing images (inserted photos) into a pdf document using Adober Reader 8, the images are moved from their original location and the size and ratio are changed. Is there either a process for preserving the images as they are in the word doucment or a way to fix the problem? Thanks for any help you can give.
Regards,
RoseReally not sure what you are trying to do since you can not import images into Reader. Since Reader can not create PDFs, we are at a loss of your problem. If you mean Acrobat, then tell us exactly the steps you are using to create the and what versions of both programs Like AA8.1., WORD 2003 (possibly release also) or WORD 2007. The different versions of WORD also also interact with Acrobat differently.
-
I am creating an IDML file by using the properties from a MIF file. I have an Image object in MIF file. Its location is represented by using Left, Top, Height and Width. But in IDML file location representations are different. How can I include Image location in IDML file?
Have you read the specification? Try example 15!
Have you exported an sample Indesign document?
Coordinates are pasteboard (not spread) coodinates in units of points,
per section 10.3.3. You need not apply any transformation and can use
the identity, ItemTransform="1 0 0 1 0 0." But you could do othre
things if you wanted to.
Your PathPoint anchors will correspond to the 4 corners. So you'll use
Left for the X values of the upper-left and lower-left corners, top
for the Y values of hte upper-left and upper-right corners, and
sum Left+Width for the X values of the right corners and sum Top+Height
for hte Y values of the bottom corners.
This is pretty well-documented stuff. Please take the time to read the
documentation before asking for help.
Maybe you are looking for
-
Address Book/iSync - email addresses moving to phone number fields
I'm not sure what is causing this, but I'm noticing that email addresses in my cards are moving to phone number fields. I originally thought this had something to do with cards that had no phone number in them, only an email address, but now I"m real
-
Can I create a PDF document that can be commented on by others using READER
I have dozens (hundreds?) of PDF Books that I've purchased. Whoever created them made them so anyone using Adobe Reader 5 or better can make highlights and comments on the text. I use the feature to correct typos and send them back to the publisher.
-
Lenovo Ideapad U410: Display not working after sleep and/or restart
Hello all, I am recently having some inconsistent display issues with my Lenovo U410 laptop i7 1TB with a Windows 8 PRO upgrade (came with windows 7). When I press the Power Button on my laptop to put it to sleep, the Screen turns black as if it is
-
I lost my recovery partition for hp dv6 63300ee, with windows 7 home,, what can i do to back it?
i lost my recovery partition for hp dv6 63300ee, with windows 7 home,, what can i do to back it?
-
Put the current date and time in a string
I am having trouble trying to put the current date and time from my Calendar object into a string any ideas?