Redirecting the message Max User Limit Reached to page

Hi Gurus,
We have set a user limit parameter in portal to limit the no of users logging into portal at a time...This parameter was set for each server node.
Now as soon as the limit reached on any of the sap server, then that triggers the message to the new user that "MAX_USER_LIMIT_REACHED".
We wanted to redirect this message/page to a different page where we say that user has to try after 15 minutes as the system is loaded now....
Can Anyone help me in knowing how to get this message/page redirected.
Regards,
Radhe.
Edited by: radhe# on Mar 12, 2010 6:56 AM

Hi I am not sure at all .....though I do know IMgur means an Internet Image sharing website....Are you actually trying to log into My O2? http://www.o2.co.uk/myo2Maybe you need to contact O2 and ask them to look at reprovisioning your account. Its the only other thing I can think of. I presume you have rebooted your phone numerous times?http://www.o2.co.uk/contactus

Similar Messages

Error: Max processing time or Max records limit reached

Hi All,
While I run the report in Infoview, I get the below error:
Unable to retrieve object:
Max processing time or Max records limit reached
Kindly suggest me.
Thanks,
Meena

There is a default limit on the number of records returned and on the time out of an 'idle' connection..These could be set in the CMC , however first try to check the query for that report and see if it is applying your record selection criteria at the database level ( use the Show Sql option and see if all your selection criteria have been turned into WHERE clauses)
- this will drastically reduces both the number of records returned to the Crystal and the time it takes for...
You can find setting here:
CMC>servers>page server>properties
Its always not recommended to set it to unlimited as page server is not a robust server, you need to schedule such reports that uses job server which is more robust.
Regards,
Parsa.

Solaris-x86 mount fat32 partition, the partition max size limit?

solaris10 x86, laptop, 10G FAT32 partition for windows & x86 exchange data.
the fat32 partition mount as normal, can be read fine.
but write some file by x86, that can not find by windows.
anyboy know did the solaris-x86 mount fat32 partition, the partition max size limit? or no limit, why this problem occur?

Mounting Windows partition in Solaris
The easiest way to share data now is to do it through a FAT32 partition. Solaris
recognises it as partition of type pcfs. It is specified as device:drive where drive is
either the DOS logical drive letter (c through z) or a drive number (1 through 24).
Drive letter c is equivalent to drive number 1 and represents the Primary DOS partition
on the disk; drive letters d through z are equivalent to drive numbers 2 through 24,
and represent DOS drives within the Extended DOS partition.Syntax is
mount -F pcfs device:drive /directroy-name
where directory name specifies the location where the file system is mounted.
To mount the first logical drive (d:) in the Extended DOS partition from an IDE hard
disk in the directory /d use
mount -F pcfs /dev/dsk/c0d0p0:d /d
You can use mount directory-name after appending following line is in
/etc/vfstab file
device:drive directory-name pcfs no rw
for example
c0d0s0:c /c pcfs no rw
If your windows partition like the following means
C: - NTFS, D:-FAT32, E:-NTFS, F:-FAT32
Then you can only mount D, F not C & E.
Mounting D Drive:
mount -F pcfs /dev/disk/c0d0p0:c /mountpoint
Mounting F Drive
mount -F pcfs /dev/disk/c0d0p0:d /mountpoint
The driveletter only for fat not including other file systems (ntfs or any linux filesystems).

On start up I get the message "C:\users\login name\Appdata\local\temp\225704Log.in iiss Lost"

on start up I get the message "C:\users\login
name\Appdata\local\temp\225704Log.in iiss Lost"
I've gorn though so many discussions on this trying to fix it I've
do everything and it is still poping up every time i turn my desktop on what do i do?

Hi,
The suggestion provided by Maffiow is worthy to try. Msconfig can tell you some on things loaded on startup. Do any of the items listed refer to that file?
In addition, it states that your windows 7 is missing some system files. And definitely it would be some important to file to your windows. You better check it with performing a Clean Boot.
How to perform a clean boot to troubleshoot a problem in Windows 8, Windows 7, or Windows Vista
http://support.microsoft.com/kb/929135
The path which you have shown here is a path for temporary file. I think there will be something wrong with your system temp folder. For this Clear the redundant files in temporary folder. You can do this by performing the following steps.
a. Restart the computer to Safe Mode.
b. Click Start and click Control Panel.
c. Click Classic View and choose Folder Options.
d. Click View tab, choose Show hidden files and folders box, click Apply and click OK.
e. Click Start -> Computer.
f. Go to C:\Users\your user name\AppData\Local\Temp folder.
g. Select all files in the Temp folder and delete them. Click Yes when prompted.
h. Restart the computer to Normal Mode for a test.
Hope it helps.
Regards,
Blair Deng
Blair Deng
TechNet Community Support

My phone will not send emails even after the IOS 8 update. I continue to get the message of user name or password for my email are incorrect.

My phone will not send emails even after the IOS 8 update. I continue to get the message of user name or password for my email are incorrect.

Did you try to delete the mail account, restart the phone and add the mail account again?
iOS: Setting up an email account
This article provides morse tips, if you can't connect or you receive an error in Mail.

Max processing time or Max records limit reached (Crystal Reports Server)

Although my report runs fine from with Crystal Reports (designer), I get an error when I try to run it from the Crystal Reports Server portal.
I get an error u201CMax processing time or Max records limit reachedu201D.
How can I solve this problem?
Iu2019m accessing a DB2 database on an iSeries Server thru ODBC. I know that the report uses a lot of data. Therefore I have set u201Callow query timeout yesu201D within the ODBC data source. The data connection itself is not the problem, I have no problem running other reports on the same connection.
PS. A do not know whether or not this is the right forum for my post. I first posted within "Java Development - BusinessObjects Enterprise, BusinessObjects Edge, Crystal Reports Server" but I did not get any response.

I found the answer to my problem:
1) Log onto the CMC
2) Goto "Servers" in the dropdown menu
3) Expand "Service Categories"
4) Select "Crystal Reports Services
5) In the right window will be listed the currently running services. The 2 services that Dell mentioned are in there under "Description": CrystalReportsProcessingServer and CrystalReports2013ProcessingServer
Hope this helps somebody else.

Customize the message "Welcome, user !".

Hello,
When we login to Obiee, we get the mesage "Welcome, <user> !".
We need to customize this to show it as <user>, at position <postion variable>.
Could anyone let me know how to do it.
Thanks

The "Welcome" message comes from a message xml file, uimessages.xml which allows for a single parameter insert which is coded for the Display Name session variable. There is typically an init block in the rpd that sets the Display Name. OOTB this is the "LOGIN Properties" init block. You can try to modify the SQL for this init block so the Display Name includes the extended information you want to display. Of course, if Display Name is used anywhere else then it will also include the extended information.

Intercept in BI 4.x the message 'concurrent users reached'

Hi all,
is possible to intercept in BI 4.x, and then alert the user, when the maximum number of concurrent users has been reached without generating a generic error?
Thanks in advance

Thanks Konduru,
I also think that we can do with the SDK but I hope someone responds that he has already done.
Regards.

I am unable to receive and send mail, the message says "user name or password is incorrect"

i deleted my hotmail account and re set but still its same problem, i checked hotmail account on desk top and its ok i can open it there

Delete the email account and re-enter it from scratch.

I'm getting the message: C:\Users\Jane\AppData\Local\Temp\topics_politics_intermediate-11.mp3 could not be opened, because the associated helper application does not exist. Change the association in your preferences.

At first I thought it was a broken file, but then realised it was all MP3s.
The same MP3 downloads fine in Internet Explorer.
Thanks.

Do you have any setting for MP3 in Tools > Options > Applications ?
You usually need the QuickTime plugin to play MP3 files on Windows because that is the only plugin that supports that file extension if there is no MIME type specified to play the file with another plugin like Windows Media Player or RealPlayer.

'Max identity limit reached for same contact number' - question

Hi everyone, I need some help figuring out what this error means. It happend ever since I switched from pay as you go to pay monthly a while back. When O2 made the switch I noticed some weird behavoir on my account, for example every time I log in to O2.co.uk I have to reset my password regardless if it is correct or not, and also the iphone app has never seemded to work for me. I found this error the other day trying to reset my contact details and I think it may be related.http://imgur.com/igeW5kI Any information on how to fix this would be really helpful as I am not sure what exactly has happened here.. Thanks all,Dave

Hi I am not sure at all .....though I do know IMgur means an Internet Image sharing website....Are you actually trying to log into My O2? http://www.o2.co.uk/myo2Maybe you need to contact O2 and ask them to look at reprovisioning your account. Its the only other thing I can think of. I presume you have rebooted your phone numerous times?http://www.o2.co.uk/contactus

Cannot contact Windows Help and Support Centre as I receive the message "An ActiveX control on this page is not safe, your current settings prohibit running unsafe controls on this page". My ISP says this is a Mozilla incompatibility?

I run Windows XPSP2, my ISP is BT Broadband, security suite is BT NetProtect Plus which is essentially a McAfee product. I am having trouble with a printer connection - when I turn it on I receive a message "USB Device not recognised". I have done usual things turned off, unplugged, replugged with identical lead that is known to be OK, uninstalled software and tried to reinstall from CD (cannot complete as message recived again as oon as I turn on printer). Final solution is to click on this message as it advises to obtain USB troubleshooting advice from Microsoft Help and Support Centre. This is when I get message in my original question which prevents me going further. I have accessed Windows/Contol Panel/Internet/Security and set level to medium but this makes no difference. Contacting my ISP, I was told this was an incompatibility issue with Mozilla. If so I have no way of finding out what my connection problem is.

ActiveX is an Internet Explorer plugin system and will not work on Firefox or many other browsers. To use ActiveX you will need to use Internet Explorer.

Max Menu Items Reached in Step Type Palettes

Hi,
I am seeing a greyed out text in some of my step type palettes 'Max Menu Items Reached' which is probably derived from the Resource string SEQ_MAXIMUM_MENU_ITEMS_REACHED.
What defines the maximum number of menu items in the type palettes and can it be changed.
Regards
Ray Farmer

Ray,
The maximum number of menu items for TestStand 2.0.1 is set to be 256. This is pre-defined and cannot be changed. The message "'Max Menu Items Reached" should be displayed once you have inserted 256 menu items.
Hope that helps!
Shannon Rariden
Applications Engineer
National Instruments

Logfile size limit reached - logging stopped

From time to time, quite often, a pop-up window appears on my screen and says:Logfile size limit reached - logging stopped. I only can push "Accept" button or close it, but it rises again some time later. I haven't found any information on the web.

Hello,
I had this problem too, but I found the cause of it. It's comes from the extension 'IPLogger 1.6'.
This extension store, for every connexion, your IP adresse in a logfile, so after some times the file is full and the message "Logfile size limit reached" is displayed.
The best solution is to completely remove this extension, and replace it by similar one, like 'External IP'.
Now, the problem is solved for me :)
p.s. This problem should be considered as a bug for extension IPLogger. The logfile should be cleared when full instead of diplaying this annoyinf message !

Could I redirect a message passing by the conversion channel

I Have IMS 5.2 p1, and I am searching about how I can forward a message to a certain mailbox depending on the message attachment. I can only delete the attachment, or hold the message. but cannot redirect the message to another destination recipient ?
Is there a way to do this ?
Please if anyone could help, it is very urgent.
Thanks.

I Have IMS 5.2 p1, and I am searching about how I can
forward a message to a certain mailbox depending on
the message attachment. I can only delete the
attachment, or hold the message. but cannot redirect
the message to another destination recipient ? Actually you probably could redirect this by using
a sieve filter easier than a conversion channel.
But it is possible if you write the appropriate
headers replacing the envelope to: be the new
recipient you could "forward" the message I believe.
For detail support of this nature, I suggest
you call support who can better diagnose
what it is you're trying to do and how best
to accomplish it.
>
Is there a way to do this ?
Please if anyone could help, it is very urgent.
Thanks.

Redirecting the message Max User Limit Reached to page

Similar Messages

Maybe you are looking for