Redisgn for performance enhance.

Hi experts,
I have a problem which is a bit unclear at this point of the time. I have a program with two subroutines and its performance is very poor. So we decided to redesign it into three different individual programs. One for each subroutine and a'HAT' program which calls these two programs. Please let me know if this enhances the performance and if it is feasible.
regards,
anirvesh

Hi Rob,
The code is very large. Actually in one subroutine we are identifying the records to be updated and in the other subroutine we are updating the records. So the actual plan is to do parallel processing. So if doing parallel processing does the splitting of the program helps??
Thanks.

Similar Messages

IViews for Performance Management - EP 4

Hello Experts,
Please, I would like to know what are the iviews (MSS and ESS) for Performance Management in Flexible scenario, with Enhancement Package 4.
Thanks in advance!
Sinavi

Hi,
basically all HAP* - iviews:
HAP_A_ESS_START_PAGE
HAP_A_MSS_START_PAGE
HAP_CONFIGURATION
HAP_DOCUMENT_LINK
HAP_MAIN_DOCUMENT
HAP_QUALIFICATION_PROFILE
HAP_START_PAGE_POWL_UI_ESS
HAP_START_PAGE_POIWL_UI_MSS
Wilfred.

How to write the ABAP code for Datasource Enhancment

Hi Team,
Can you please help me how to write the code for the enhancement i have made to the standard datasource
i have added the fields ZZPayer and ZZPayer_access.
I just wanted to know how to write the ABAP code to populate the data for these fields.
Regards,
Pradeep P.

Hi
From a performance point of view would like to suggest a few changes :
WHEN '<DS name>'.
select zzfields from <table> into itab
for all entries in c_t_data where <condition>.
If sy_subrc = 0.
loop at c_t_data assiging f_c_t_data.
read itab into wa_itab where key = f_c_t_data-key.
f_c_t_data-zzfield = wa-itab-zzfield.
endloop.
refresh itab.
regards,
aparna
endif.

For performance point, in data loading what we need to do?

Hi,
1.for performance point, in data loading what we need to do?
2.How to increase Cube performance & query Performance?
Thanks,
Basava Raju

Hi,
In addition to the above steps, especially for data loading, make sure that if you have custom code, its enhanced for performance both on the R3 side and the BI side as well.
For generic data sources, try to make them generic deltas or try pseudo deltas for them.
From a query pespective, in filters, try putting include conditions wheree ver possible instead of exclusions.
Cheers,
Kedar

Getting this error while opening a folder : This file does not have a program associated with it for performing this action. Please install a program or, if one is already installed, create an association in the Default Programs control panel

Hi,
While trying to open a folder on my Windows 7 Home Premium, an error comes "This file does not have a program associated with it for performing this
action. Please install a program or, if one is already installed, create an association in the Default Programs control panel." I tried searching on the net but did not get great support for the issue when it happens with folder opening.

Hi Nikunj Shah,
First, I suggest you download
Microsoft Safety Scanner or
Malicious Software Removal Tool to run a full scan.
The error messages here seems to be caused by the corrupted registries, which related with the folder association.
You may take a try to merge the following registry settings to reset the folder association, before that, remember to backup your registry settings first:
How to back up and restore the registry in Windows
Copy and paste the following commands into Notepad, and save it to a .reg file:
=================
Windows Registry Editor Version 5.00
[HKEY_CLASSES_ROOT\Folder]
"ContentViewModeLayoutPatternForBrowse"="delta"
"ContentViewModeForBrowse"="prop:~System.ItemNameDisplay;~System.LayoutPattern.PlaceHolder;~System.LayoutPattern.PlaceHolder;~System.LayoutPattern.PlaceHolder;System.DateModified"
"ContentViewModeLayoutPatternForSearch"="alpha"
"ContentViewModeForSearch"="prop:~System.ItemNameDisplay;System.DateModified;~System.ItemFolderPathDisplay"
@="Folder"
"EditFlags"=hex:d2,03,00,00
"FullDetails"="prop:System.PropGroup.Description;System.ItemNameDisplay;System.ItemTypeText;System.Size"
"NoRecentDocs"=""
"ThumbnailCutoff"=dword:00000000
"TileInfo"="prop:System.Title;System.ItemTypeText"
[HKEY_CLASSES_ROOT\Folder\DefaultIcon]
@=hex(2):25,00,53,00,79,00,73,00,74,00,65,00,6d,00,52,00,6f,00,6f,00,74,00,25,\
00,5c,00,53,00,79,00,73,00,74,00,65,00,6d,00,33,00,32,00,5c,00,73,00,68,00,\
65,00,6c,00,6c,00,33,00,32,00,2e,00,64,00,6c,00,6c,00,2c,00,33,00,00,00
[HKEY_CLASSES_ROOT\Folder\shell\explore]
"MultiSelectModel"="Document"
"ProgrammaticAccessOnly"=""
"LaunchExplorerFlags"=dword:00000018
[HKEY_CLASSES_ROOT\Folder\shell\explore\command]
"DelegateExecute"="{11dbb47c-a525-400b-9e80-a54615a090c0}"
[HKEY_CLASSES_ROOT\Folder\shell\open]
"MultiSelectModel"="Document"
[HKEY_CLASSES_ROOT\Folder\shell\open\command]
"DelegateExecute"="{11dbb47c-a525-400b-9e80-a54615a090c0}"
@=hex(2):25,00,53,00,79,00,73,00,74,00,65,00,6d,00,52,00,6f,00,6f,00,74,00,25,\
00,5c,00,45,00,78,00,70,00,6c,00,6f,00,72,00,65,00,72,00,2e,00,65,00,78,00,\
65,00,00,00
[HKEY_CLASSES_ROOT\Folder\shell\opennewprocess]
"MUIVerb"="@shell32.dll,-8518"
"MultiSelectModel"="Document"
"Extended"=""
"LaunchExplorerFlags"=dword:00000003
"ExplorerHost"="{ceff45ee-c862-41de-aee2-a022c81eda92}"
[HKEY_CLASSES_ROOT\Folder\shell\opennewprocess\command]
"DelegateExecute"="{11dbb47c-a525-400b-9e80-a54615a090c0}"
[HKEY_CLASSES_ROOT\Folder\shell\opennewwindow]
"MUIVerb"="@shell32.dll,-8517"
"MultiSelectModel"="Document"
"OnlyInBrowserWindow"=""
"LaunchExplorerFlags"=dword:00000001
[HKEY_CLASSES_ROOT\Folder\shell\opennewwindow\command]
"DelegateExecute"="{11dbb47c-a525-400b-9e80-a54615a090c0}"
[HKEY_CLASSES_ROOT\Folder\ShellEx\ContextMenuHandlers\BriefcaseMenu]
@="{85BBD920-42A0-1069-A2E4-08002B30309D}"
[HKEY_CLASSES_ROOT\Folder\ShellEx\ContextMenuHandlers\Library Location]
@="{3dad6c5d-2167-4cae-9914-f99e41c12cfa}"
[HKEY_CLASSES_ROOT\Folder\ShellEx\ContextMenuHandlers\Offline Files]
@="{474C98EE-CF3D-41f5-80E3-4AAB0AB04301}"
[HKEY_CLASSES_ROOT\Folder\ShellEx\DragDropHandlers\{BD472F60-27FA-11cf-B8B4-444553540000}]
@=""
[HKEY_CLASSES_ROOT\Folder\ShellEx\PropertySheetHandlers\BriefcasePage]
@="{85BBD920-42A0-1069-A2E4-08002B30309D}"
[HKEY_CLASSES_ROOT\Folder\ShellEx\PropertySheetHandlers\Offline Files]
@="{7EFA68C6-086B-43e1-A2D2-55A113531240}"
[-HKEY_CLASSES_ROOT\Folder\ShellNew]
[HKEY_CLASSES_ROOT\Folder\ShellNew]
"Directory"=""
"IconPath"=hex(2):25,00,53,00,79,00,73,00,74,00,65,00,6d,00,52,00,6f,00,6f,00,\
74,00,25,00,5c,00,73,00,79,00,73,00,74,00,65,00,6d,00,33,00,32,00,5c,00,73,\
00,68,00,65,00,6c,00,6c,00,33,00,32,00,2e,00,64,00,6c,00,6c,00,2c,00,33,00,\
00,00
"ItemName"="@shell32.dll,-30396"
"MenuText"="@shell32.dll,-30317"
"NonLFNFileSpec"="@shell32.dll,-30319"
[HKEY_CLASSES_ROOT\Folder\ShellNew\Config]
"AllDrives"=""
"IsFolder"=""
"NoExtension"=""
==================
Once done, right-click the REG file and choose Merge. Alternately, you can open the Registry Editor and then using the
Import option from the File menu, to merge the REG file contents.
Let me know if you need any further help.
Best regards
Michael Shao
TechNet Community Support

Abap Logic for performance tuning not working when using Internal tables

Hi,
I wrote this piece of code that is working correctly that is select SUM of cost from DSO where Plant is the same for Sales Items.
LOOP AT RESULT_PACKAGE INTO rp.
SELECT SUM( /N/S_STRDCOST ) FROM /N/ADSP_DPIT00 INTO
rp-/N/S_STRDCOST
WHERE /N42/S_SALESITEM = rp-/N42/S_ITEMID AND /N42/S_PLPLANT EQ
rp-/N42/S_SOURCE.
MODIFY RESULT_PACKAGE FROM rp.
Clear rp.
ENDLOOP.
Now I try to rewrite it for performance tunning using internal table but I am getting 0 values. can't figure out whats the problem and been struggling fixing it.
TYPES : begin of ty_DSO_TABLE,
         /N42/S_STRDCOST TYPE /N/ADSP_DSPC00-/N/S_STRDCOST,
         /N42/S_ITEMID TYPE /N/ADSP_DSPC00-/N/S_ITEMID,
       end of ty_DSO_TABLE.
DATA: it_DSO_TABLE type hashed table of ty_DSO_TABLE with unique key
/N/S_ITEMID,
     wa_DSO_TABLE type ty_DSO_TABLE.
Field-symbols: <rp> TYPE tys_TG_1.
LOOP AT RESULT_PACKAGE assigning <rp>.
clear wa_DSO_TABLE.
Read table IT_DSO_TABLE into wa_DSO_TABLE with table key /N/S_ITEMID
= <rp>-/N/S_ITEMID.
if sy-subrc ne 0.
      select SUM( /N/S_STRDCOST ) into CORRESPONDING
      FIELDS OF wa_DSO_TABLE from
      /N/ADSP_DPIT00 WHERE /N/S_SALESITEM = <rp>-/N/S_ITEMID AND
      /N/S_PLPLANT EQ <rp>-/N/S_SOURCE.
     if sy-subrc eq 0.
          <rp>-/N/S_STRDCOST = wa_DSO_TABLE-/N/S_STRDCOST.
     endif.
endif.
ENDLOOP.
Any idea whats wrong with the code
thanks

Hi Vaidya,
According to the code which you have written, there is no value in table IT_DSO_TABLE when you are trying to read the values.And after the read statement you have given a condition for sy-subrc. Hence the select statement is actually not even getting executed. *Also you have not assigned the final value back to the ResultPackage.*_
So Kindly correct your code as follows:
Data: wa_dso type ty_DSO_TABLE.
LOOP AT RESULT_PACKAGE assigning <rp>.
clear wa_DSO_TABLE.
select SUM( /N/S_STRDCOST ) into CORRESPONDING
FIELDS OF wa_DSO_TABLE from
/N/ADSP_DPIT00 WHERE /N/S_SALESITEM = <rp>-/N/S_ITEMID AND
/N/S_PLPLANT EQ <rp>-/N/S_SOURCE.
if sy-subrc eq 0.
<rp>-/N/S_STRDCOST = wa_DSO_TABLE-/N/S_STRDCOST.
MODIFY RESULT_PACKAGE FROM <rp>.
endif.
ENDLOOP.
Hope this helps you.
Regards,
Satyam

Sample Code for CRM enhancement in BADI

hi,
can anybody please give me sample code for BADI for CRM enhancement.
i have added couple of z field in a extract structure. now i have to write code in BADI to populate those fields.
please do not send code for user exit.
Regards
Subrata

Hi Aviral,
Please consider below thread :
http://scn.sap.com/thread/2069370
Best regards - Christophe

Model wage type for performance pay and additional pay

Hi gurus,
my client wants performance pay and additional pay in the additional payments. I am confused what model wage types to be copied for this. i tried copying m2sf for these but the prob is if if the employee is joining in the mid of month say 15th , then if i am trying to give performane pay of 10,000 rs then it is calculating only 15 days pay n giving 5000 in the payroll n payslip.
if i try to copy the other wage types like m200,m281 n m282, i have the same problem . but if i copy m280 for both of these w.ts ,then it is giving the flat amount irrespective of the joining date of employee. but my question is does it have any implications on the calculation of the tax. coz i observed different model wage types deduct different amounts of tax. i.e if i copy m281 for performance apy n give the value as 10,000 then ,it give some x amount of tax on 10,000 similarly if i copy some other model w.t , for same amount of 10,000 it gives some other amount of tax.
im really confused ,plzz help

Hi ramm,
I have checked the w.t amount in /434
/434 Total Incom                                                   182,060.00
n my other w.t amounts are:
4MOB Mobile Reim                                                    25,000.00
4PER Performance                                                    15,000.00
5CEA Child Educa                                                       193.55
5CON Conveyance                                                      1,451.61
5HRA House Rent                                                      4,838.71
5SPL Special All                                                    19,354.84
/001 Valuation b01                          179.90
/002 Valuation b01                          179.90
/118 PTax Basis 01                                                  75,516.13
/119 PTax Basis 01                       96,774.19                  35,516.13
2CAN Canteen Ded01                                                   2,000.00-
2NOT Notice Deuc01                                                   2,000.00-
2OTH Other Deduc01                                                   1,500.00-
5BAS BASIC      01                                                   9,677.42
I dont know how to check the slabs, i am new to payroll,can u guide plzz

Every time I update or repair in the control panel it comes up with a error message like, this file does not have a program associated with it for performing this action, please install a program if it is installed create an association to the default pro

EVERYTIME I UPDATE SOFTWARE OR GO INTO THE CONTROL PANEL TO ITUNES TO REPAIR OR CHANGE IT GIVES ME AN ERROR MESSAGE
THIS FILE DOES NOT HAVE A PROGRAM ASSOCIATED WITH IT FOR PERFORMING THIS ACTION. PLEASE INSTALL A PROGRAM, IF IT IS INSTALLED CREATE AN ASSOCIATION TO THE DEFAULT PROGRAMS CONTROL PANEL

STOP SHOUTING! Or at the very least, get the CAPS lock key fixed.
Remove iTunes.
Download and install the current version of iTunes from http://www.apple.com/itunes/download

Tying to install itunes and I get error message "This file does not have a program associated with it for performing this action. Please install a program, or if one is already installed, create an association in the Default Programs control panel. Help

am tTying to install itunes and I get error message "This file does not have a program associated with it for performing this action. Please install a program, or if one is already installed, create an association in the Default Programs control panel. Can anyone help me?

Hi,
Here is a similar thread for your reference:
There is no email program associated to perform the requested action. Please install an email program or, if one is already installed, create an association in the Default programs control panel
http://social.technet.microsoft.com/Forums/en/w7itproappcompat/thread/036e3cf6-bff7-4ef2-bd0a-555cd2399ad4
Hope this helps
Vincent Wang
TechNet Community Support

ITunes installation error: does not have program associated with it for performing this action

Repeated tries to install iTunes continues to fail. Installing on Acer laptop using Windows 7.
Error: does not have program associated with it for performing this action
We have done the following: open Default programs, clicked associate a file type, clicked on change program button and selected a program to open with and clicked OK/enter.
The installation continues. we get to the finish window; click finish.
Next error: iTunes has been installed incorrectly.
So, what do we do to get iTunes working?
Thank you.

Hi normeagle,
Welcome to Apple Support Communities.
You may find this article helpful for troubleshooting your iTunes installation:
Trouble installing iTunes or QuickTime for Windows
http://support.apple.com/kb/HT1926
Best,
Jeremy

How to c heck if exicse invoice is executed for performa invoice ,

how to c heck if exicse invoice is executed for performa invoice , cos u cannot see the excise invoice in doc flow where exactly can i see the excise num against the proforma,,, pls help

Hi,
Go to J1IIN->Excise Invoice>Change
Select Alternate Selection-->Enter the Billing Document and Press Document Flow..
Here u can see the full document flow
Thanks,
Sam

Powershell shortcut gives"this file does not have a program associated with it for performing this action"

Hi,
We have a server where powershell gives an error. The shortcut or the context menu for start button (replaced cmd in context menu) gives an error saying "this file does not have a program associated with it for performing this action".
In some events, like going to C:\ProgramData\Microsoft\Windows\Start Menu\Programs\System Tools\Windows PowerShell.lnk and opening it results in bupkus. Nothing happens.
Browsing to C:\Windows\system32\WindowsPowerShell\v1.0\ and running powershell.exe directly or opening cmd.exe and typing powershell <enter> runs powershell as it should.
What gives?
This posting is provided "AS IS" with no warranties or guarantees and confers no rights

Hi,
I'd probably try asking here:
https://social.technet.microsoft.com/Forums/en-us/home?forum=winserver8gen&filter=alltypes&sort=lastpostdesc
This is more of an OS issue than a PowerShell issue, IMHO.
Good luck.
Don't retire TechNet! -
(Don't give up yet - 13,085+ strong and growing)

This file does not have a program associated with it for performing this ac

Hi all,
After creating an application for a WebDynpro project, when I execute the project (Deploy New Archive and Run) the application I am receiving then following error message.
"This file does not have a program associated with it for performing this action. Create an association in folder options in control panel."
Pls can anyone provide the solution.
Regards
Ravi

Maybe the problem its on the Run part. It is supposed to open a navigator and go to the URL of the application you just deployed.
Try deploying on one step and then Running on other.
If it is the Run then open the navigator and test your App.

TS3989 Mssage when opening Photo Stream on-"This file does not have a program associated with it for performing this action. Please install a program or, if one is already installed, create an association in the Default Programs control panel" Help!!!

Mssage when opening Photo Stream on-"This file does not have a program associated with it for performing this action. Please install a program or, if one is already installed, create an association in the Default Programs control panel" Help!!!

You are posting in the "icloud on my mac" forum, but your profile mentions Windows. If using a mac, you need to have iphoto or aperture installed in order to receive new photos via photo stream. If using windows, try posting in the iCloud on a PC forum. You'll get better help there.
https://discussions.apple.com/community/icloud/icloud_on_my_pc

Redisgn for performance enhance.

Similar Messages

Maybe you are looking for