REDO log files lost!!!!!

Hi,
I lost my REDO log files, How i can recover???
Thanks
Ashish Jain

It failes at the recovery! Is there anything else i can do? Btw Thanks for helping me with this problem!
SQL> recover database until cancel;
ORA-00283: recovery session canceled due to errors
ORA-01610: recovery using the BACKUP CONTROLFILE option must be done
ORA-00905: missing keyword
SQL> recover database using backup controlfile until cancel
ORA-00279: change 21344768 generated at 09/10/2008 11:54:49 needed for thread 1
ORA-00289: suggestion :
/u01/app/oracle/infrastructure/flash_recovery_area/ASDBDEV/archivelog/2008_09_11
/o1_mf_1_2545_%u_.arc
ORA-00280: change 21344768 for thread 1 is in sequence #2545
Specify log: {<RET>=suggested | filename | AUTO | CANCEL}
cancel
ORA-01547: warning: RECOVER succeeded but OPEN RESETLOGS would get error below
ORA-01194: file 1 needs more recovery to be consistent
ORA-01110: data file 1: '/u02/oradata/asdbdev/asdbdev/system01.dbf'
ORA-01112: media recovery not started

Similar Messages

Redo log files lost in Disk Corruption/failure

DB version:10gR2
In one of our test databases, I have lost all members of a group due to disk corruption(it was a bad practise to store both members on the same filesystem)
Database is still up. We don't have a backup of the lost redo log group. Altogether we had 3 redo log groups. this is what i am going to do to fix this issue.
Step 1. Add a redo log group
ALTER DATABASE
ADD LOGFILE ('/u04/oradata/ora67tst/log4a.rdo',
   '/u05/oradata/ora67tst/log4b.rdo') SIZE 15m;Step 2. Drop the corrupted redo log group
ALTER DATABASE DROP LOGFILE GROUP 2;Is this the right way to go about fixing this issue?
The documentation says that you need to make sure a redo log group is archived before you DROP it.
When i use the query
SQL>SELECT GROUP#, ARCHIVED, STATUS FROM V$LOG;
    GROUP# ARC STATUS
         1 YES ACTIVE
         2 NO CURRENT
         3 NO INACTIVE
How can i force the archiving of a redo log group 2?
Edited by: Citizen_2 on May 28, 2009 10:10 AM
Edited by: Citizen_2 on May 28, 2009 10:11 AM

Citizen_2 wrote:
How can i force the archiving of a redo log group 2?How could you archive a log group when you have lost all members of that group?
Have you checked out this documentation: [Recovering After the Loss of Online Redo Log Files|file://///castle/1862/Home%20Directories/Vaillancourt/Oracle%2010gR2%20Doc/backup.102/b14191/recoscen008.htm#sthref1872]
More specifically:
If the group is . . .      Current
Then . . .
It is the log that the database is currently writing to.
And you should . . .
Attempt to clear the log; if impossible, then you must restore a backup and perform incomplete recovery up to the most recent available redo log.
>
HTH!

Dataguard Solution for standby redo log file groups

Respected Experts,
My database version is 10.2.0.1.0 and Red Hat 5 os.I want to create a standby database using RMAN.
Can any one help me with the full steps.And i'm also confuse about number of standby redo log file members
need to be created.
Thanks and Regards
Monoj Das

My database version is 10.2.0.1.0 and Red Hat 5 os.I want to create a standby database using RMAN.To configure standby either you can use duplicate target database for standby
or
1) restore standby controlfile
2) mount standby database
3) restore database
and configure standby paraemter then start MRP, will do.
http://docs.oracle.com/cd/B19306_01/server.102/b14239/create_ps.htm
Can any one help me with the full steps.And i'm also confuse about number of standby redo log file members
need to be created.It depends which parameter you want to use, if you mention log_archive_dest_2='service ARCH ' then no need to create any standby redo log file groups,
If you use log_archive_dest_2='service LGWR ' here transport will be in terms of redo and you need standby redo log files on standby database. Which is realtime.
When you use LGWR, data lost will be less if in case of any online redo log file lost. which is recommended.
HTH.

Current redo log file is lost

Hi All,
I got a scenario in which my current redo log file is lost:
Do I need to:
1)Clear log file group
(or)
2)I should perform incomplete recovery.
What are the steps I should follow to recover this current redo log file?
1)*If it is inactive* I can make use of
ALTER DATABASE CLEAR LOGFILE UNARCHIVED GROUP 2;
which will drop and recreate the log file.To recover from loss of an active online log group in NOARCHIVELOG mode:
If the media failure is temporary, then correct the problem so that the database can reuse the group when required.
Restore the database from a consistent, whole database backup (datafiles and control files) as described in "Restoring Datafiles Before Performing Incomplete Recovery". For example, enter:
% cp /disk2/backup/*.dbf $ORACLE_HOME/oradata/trgt/
Mount the database:
STARTUP MOUNT
Because online redo logs are not backed up, you cannot restore them with the datafiles and control files. In order to allow the database to reset the online redo logs, you must first mimic incomplete recovery:
RECOVER DATABASE UNTIL CANCEL
CANCEL
Open the database using the RESETLOGS option:
ALTER DATABASE OPEN RESETLOGS;
Shut down the database consistently. For example, enter:
SHUTDOWN IMMEDIATE
Make a whole database backup.
To recover from loss of an active online redo log group in ARCHIVELOG mode:
If the media failure is temporary, then correct the problem so that the database can reuse the group when required. If the media failure is not temporary, then use the following procedure.
Begin incomplete media recovery, recovering up through the log before the damaged log.
Ensure that the current name of the lost redo log can be used for a newly created file. If not, then rename the members of the damaged online redo log group to a new location. For example, enter:
ALTER DATABASE RENAME FILE "?/oradata/trgt/redo01.log" TO "/tmp/redo01.log";
ALTER DATABASE RENAME FILE "?/oradata/trgt/redo01.log" TO "/tmp/redo02.log";
Open the database using the RESETLOGS option:
ALTER DATABASE OPEN RESETLOGS;
My question is when the redo log file is current. What steps we should follow?
Best regards,
Rafi.
http://rafioracledba.blogspot.com/
2)If it is active then I can make use of below steps:

Rafi (Oracle DBA) wrote:
Hi Asif,
This link I have seen by refering to previous post.I just have a slight doubt in mind.
1)Do I need to make use of statement:
Alter database clear unarchived log file group#;
(or)
Only if your group is current(or you are not able to drop it) and is not archived then you should use above query.
We should perform incomplete recovery for this.If we have to perform incomplete recovery what are the steps I should follow?
I doubt you should be performing incomplete recovery for this.
Eg:Let us say my group 1 is dropped it has only one member and it is in active state.How to recover database?Can I get the steps?
You would not be able to drop it if it is in active state, did you meant it is corrupted? If yes then you can use below query
Alter database clear [unarchived] LOGFILE GROUP #;>
Best regards,
Rafi
http://rafioracledba.blogspot.com/
Make sure to backup your database after above activity.
Regards
Anurag

Dataguard lost both Primary redo log and standby redo log files

Hi,
I am new to data guard, i came acorss a scenario where we loose both primary redo log file and standby redo log files.
Can someone please help me understand how to recover from this situation.
Thanks!

>loose both primary redo log file and standby redo log files
We have to be very clear.
There are (set A) online redo log files and (set B) standby redo log files at (location 1) Primary and (location 2) Standby.
The standby redo log files, depending on the configuration, aren't strictly mandatory. The standby can be applying redo without online redo log files present as well, depending on how it was setup.
So, the question is : Did you lose online redo log files at the primary ? Didn't the primary shutdown itself then ? If so, you have to do an incomplete recovery at the primary OR switch over to the standby (which may or may not have received the last transaction, depending on how it was configured and operating) OR restore from the standby (again, with possible loss of transactions) to the primary.
Hemant K Chitale

Db restore non archive mode lost redo log file..restore from controlfile tr

i have a db 11g I had taken non archive backup but failed to take redo log files backup...
so while i restored the db ... after formatting the machine ..the oracle instance wont start.
I create a controlfile trace but when i run it i get errors.
since i dont have the older log files.. how do i get around with this issue
Thanks
Following is the sample of control file trace ..Note i cannot create the redo log file
since db wont be mounted at most it shall be in nonmount mode
and below is my created controlfile ....
CREATE CONTROLFILE REUSE DATABASE "XE" NORESETLOGS NOARCHIVELOG
MAXLOGFILES 16
MAXLOGMEMBERS 3
MAXDATAFILES 100
MAXINSTANCES 8
MAXLOGHISTORY 292
LOGFILE
GROUP 1
'C:\ORACLEXE\APP\ORACLE\FLASH_RECOVERY_AREA\XE\ONLINELOG\O1_MF_1_80L7C259_.LOG'
SIZE 50M BLOCKSIZE 512,
GROUP 2
'C:\ORACLEXE\APP\ORACLE\FLASH_RECOVERY_AREA\XE\ONLINELOG\O1_MF_2_80L7C375_.LOG'
SIZE 50M BLOCKSIZE 512
-- STANDBY LOGFILE
DATAFILE
'C:\ORACLEXE\APP\ORACLE\ORADATA\XE\SYSTEM.DBF',
'C:\ORACLEXE\APP\ORACLE\ORADATA\XE\UNDOTBS1.DBF',
'C:\ORACLEXE\APP\ORACLE\ORADATA\XE\SYSAUX.DBF',
'C:\ORACLEXE\APP\ORACLE\ORADATA\XE\USERS.DBF'
CHARACTER SET AL32UTF8
I dont have these 2 files ..what do i do to get around this situation
'C:\ORACLEXE\APP\ORACLE\FLASH_RECOVERY_AREA\XE\ONLINELOG\O1_MF_1_80L7C259_.LOG'
SIZE 50M BLOCKSIZE 512,
GROUP 2
'C:\ORACLEXE\APP\ORACLE\FLASH_RECOVERY_AREA\XE\ONLINELOG\O1_MF_2_80L7C375_.LOG'
SIZE 50M BLOCKSIZE 512
-- STANDBY LOGFILE
DATAFILE
Edited by: zycoz100 on Feb 27, 2013 10:57 PM

If you have a cold backup (database shutdown properly) without the redo logs, change this :
CREATE CONTROLFILE REUSE DATABASE "XE" NORESETLOGS NOARCHIVELOGto
CREATE CONTROLFILE REUSE DATABASE "XE" RESETLOGS NOARCHIVELOGYou have to change the NORESETLOGS to RESETLOGS for Oracle to recreate the online redo logs.
Hemant K Chitale

How to disable write to redo log file in oracle7.3.4

in oracle 8, alter table no logged in redo log file like: alter table tablename nologging;
how to do this in oracle 7.3.4?
thanks.

user652965 wrote:
Thanks very much for your help guys. I appreciate it. unfortunately none of these commands worked for me. I kept getting error on clearing logs that redo log is needed to perform recovery so it can't be cleared. So I ended up restoring from earlier snapshot of my db volume. Database is now open.
Thanks again for your input.And now, as a follow-up, at a minimum you should make sure that all redo log groups have at least 3 members. Then, if you lose a single redo log file, all you have to do is shutdown the db and copy one of the good members (of the same group as the lost member) over the lost member.
And as an additional follow-up, if you value your data you will run in archivelog mode and take regular backups of the database and archivelogs. If you fail to do this you are saying that your data is not worth saving.

Restore in noarchivelog mode ( redo log files have been dropped )

1, A full backup taken using RMAN is available on disk.
2, The current control files were NOT damaged and do not need to be restored.
3, All data files are damaged .
4, The database is in NOARCHIVELOG mode.
I restore database :
1. RMAN> STARTUP MOUNT
2. RMAN> RESTORE DATABASE;
3. RMAN> recover database;
in this step , I got the information about needing redo log files ; but the redo log
files have been dropped , what should i do ?
else
I want to know there is the command 'recover database using backup control file'
in rman or not ?
Tks

Possibly loss of data (because information in online redo logs is lost):
recover database until cancel;
(cancel immediately)
alter database open resetlogs; (to build a new set of redo logs)
It's not necessary to use a backup controlfile here.

How to recover from one corrupted redo log file in NOARCHIVE mode?

Oracle 10.2.1.
The redo log file was corrupted and Oracle can't work.
When I use STARTUP mount, I got no error msg.
SQL> startup mount
ORACLE instance started.
Total System Global Area 1652555776 bytes
Fixed Size 1251680 bytes
Variable Size 301991584 bytes
Database Buffers 1342177280 bytes
Redo Buffers 7135232 bytes
Database mounted.
But I have some applications which are depended on Oracle can't be started.
So, I tried STARTUP open. But I got error msg.
SQL> startup open
ORACLE instance started.
Total System Global Area 1652555776 bytes
Fixed Size 1251680 bytes
Variable Size 301991584 bytes
Database Buffers 1342177280 bytes
Redo Buffers 7135232 bytes
Database mounted.
ORA-00368: checksum error in redo log block
ORA-00353: log corruption near block 497019 change 42069302 time 11/07/2007
23:43:09
ORA-00312: online log 4 thread 1:
'G:\ORACLE\PRODUCT\10.2.0\ORADATA\NMDATA\REDO04.LOG'
So, how can I restore and recover my database?
If use RMAN, how to do that?
Any help will be appreciated.
Thanks.

Hi, Yingkuan,
Thanks for the helps.
Actually, I have 10 redo log files exists. All of them are here.
I tried your suggestion:
alter database clear unarchived logfile group 4;
The error msg I got is the same as before:
SQL> alter database clear unarchived logfile group 4;
alter database clear unarchived logfile group 4
ERROR at line 1:
ORA-01624: log 4 needed for crash recovery of instance nmdata (thread 1)
ORA-00312: online log 4 thread 1:
'G:\ORACLE\PRODUCT\10.2.0\ORADATA\NMDATA\REDO04.LOG'
Compared to losing all the data, it is OK for me lose some of them.
I have more than 1 TB data stored and 99.9% of them are raster images.
The loading of these data were the headache. If I can save them, I can bear the lost.
I want to grasp the last straw.
But I don't know how set the parameter: allowresetlogs_corruption
I got the error msg:
SQL> set allowresetlogs_corruption=true;
SP2-0735: unknown SET option beginning "_allow_res..."
I have run the command:
Recover database until cancel
Alter database open resetlogs
The error msg I got is the following:
SQL> recover database until cancel
ORA-00279: change 41902930 generated at 11/05/2007 22:01:48 needed for thread 1
ORA-00289: suggestion :
D:\ORACLE\PRODUCT\10.2.0\FLASH_RECOVERY_AREA\NMDATA\ARCHIVELOG\2007_11_09\O1_MF_
1_1274_%U_.ARC
ORA-00280: change 41902930 for thread 1 is in sequence #1274
Specify log: {<RET>=suggested | filename | AUTO | CANCEL}
cancel
ORA-01547: warning: RECOVER succeeded but OPEN RESETLOGS would get error below
ORA-01194: file 1 needs more recovery to be consistent
ORA-01110: data file 1: 'D:\ORACLE\PRODUCT\10.2.0\ORADATA\NMDATA\SYSTEM01.DBF'
ORA-01112: media recovery not started
SQL>
From the log file, I got the following:
ALTER DATABASE RECOVER database until cancel
Fri Nov 09 00:12:48 2007
Media Recovery Start
parallel recovery started with 2 processes
ORA-279 signalled during: ALTER DATABASE RECOVER database until cancel ...
Fri Nov 09 00:13:20 2007
ALTER DATABASE RECOVER CANCEL
Fri Nov 09 00:13:21 2007
ORA-1547 signalled during: ALTER DATABASE RECOVER CANCEL ...
Fri Nov 09 00:13:21 2007
ALTER DATABASE RECOVER CANCEL
ORA-1112 signalled during: ALTER DATABASE RECOVER CANCEL ...
Thank you very much. and I am looking forward to your followup input.

Redo log files in case of NOARCHIVELOG Mode.

Question is related with the oracle architure..
database requires a minimum of two redo log files to guarantee that one is always available for writing while the other is being archived, this sounds perfect when DB is running in ARCHIVELOG mode but at the same time it also forces database to have 2 redo log files even when the DB is running in NOARCHIVELOG mode?
Any particular reason..
I would look for reasons not answers on what redo log is and what information it holds etc..

pgoel wrote:
If you had only one file all further changes would have to stop until all changed data blocks had been written to disc. By insisting on a minimum of two log files Oracle can allow the log writer to fill the second log file as the database writer writes out the dirty blocks covered by changes desrcibed in the first log file.What about having a big size redo log file instead of two? Checkppoint being initiated when the redo log file is half filled
I mean, understand the logic, two is better, even best.. but still not getting convinced. I am just trying to think, can not Oracle work with 1 group with 1 big file..specailly when Noarch mode ? Having
Edited by: pgoel on Mar 12, 2011 7:27 PMNo, you still didn't understand and I am not sure how else we can say it. Okay, think about log groups as two buckets which are used to fill the redo content. The LGWR is filling one bucket at a time till it can't accept any more content. Once filled, rather than spilling the content out, it jumps over to the second bucket. Now, taking your statement of big sized redo, Pgoel, it doesn't matter how big sized bucket you bring in, eventually it will fill in. Its not possible that you wont be able to fill it , it just would take more longer than the normal timings. Thats all. So in any case , you need the second bucket. And I am not sure that why you are struck on the archivelog mode. I hope you do understand that its an optional mode. This means, this may or may not be there. If there, its a good thing that before doing the flush of the redo content, Oracle would be able to save the contents in the archived (think about the name, it's very meaning is to preserve, to archive) log file. If not, the redo content wuold be lost and there won't be any record of transactions leaving you to reenter the lost transactions. Its a meaningless point on which you are struck i.e. the archive or no-archivelog mode. Be it whatever, Oracle would still need minimum of the two log groups.
HTH
Aman....

Delete old and unused Archived Redo Log Files

Hello forum!
My db was in ARCHIVELOG mode and It created 9GB of archived redo log files.
Now I put the db in NOARCHIVELOG mode, can I delete all the ARLF? am I sure that the DB never need those files in the future?
If yes, how can I delete them? I will use 'del' operative system command?
In addition, I found this command:
SQL>alter database open resetlogs;
is it useful for my purpose?
thank you!

You are safe to remove those archivelog files if you altered your database to no archive log mode. Just remove them from OS level
Please bear in mind that database in no archivelog mode will lost data in the event of disaster.
SQL>alter database open resetlogs;Doesn't help in your situation, it's use to bring up database after incomplete recovery.

Removing Redo Log Files? What's Normal?

Hello,
I'm new to Oracle and I've been using Informix for years. We currently have Oracle 9.2 running on Windows 2000 Server machine and apparently the redo log files keep filling up the disk drives they reside on. This is happening about every two weeks since we go out and delete the files when we remember.
My question is does Oracle have a "normal" way of removing old redo logs automatically rather than having to remove them manually? In the Informix world I can set the logical logs so that they write over previously used logs once they are no longer used. Is there a similar way to configure Oracle?
Thanks for helping out.
Gregg Walker

Do not delete your old log files: you need them.
That's how Oracle does recovery when you lose a datafile or a drive. You copy over the missing stuff from your back-up and then Oracle re-applies the chnages from the REDO logs thereby bringing your database back up to date. No work lost. Result!
Of course, if you don't take up a backup then holding on to REDO logs is pointless. In which case, set the database to run in NOARCHIVELOG mode.
However, I strongly advise you to run in ARCHIVELOG mode. You may find this part of the administrator's guide informative: http://download-west.oracle.com/docs/cd/B10501_01/server.920/a96521/archredo.htm#4553
Cheers, APC

How to recover from corrupt redo log file in non-archived 10g db

Hello Friends,
I don't know much about recovering databases. I have a 10.2.0.2 database with corrupt redo file and I am getting following error on startup. (db is non archived and no backup) Thanks very much for any help.
Database mounted.
ORA-00368: checksum error in redo log block
ORA-00353: log corruption near block 6464 change 9979452011066 time 06/27/2009
15:46:47
ORA-00312: online log 1 thread 1: '/dbfiles/data_files/log3.dbf'
====
SQL> select Group#,members,status from v$log;
GROUP# MEMBERS STATUS
1 1 CURRENT
3 1 UNUSED
2 1 INACTIVE
==
I have tried this so far but no luck
I have tried following commands but no help.
SQL> ALTER DATABASE CLEAR UNARCHIVED LOGFILE GROUP 3;
Database altered.
SQL> alter database open resetlogs;
alter database open resetlogs
ERROR at line 1:
ORA-01139: RESETLOGS option only valid after an incomplete database recovery
SQL> alter database open;
alter database open
ERROR at line 1:
ORA-00368: checksum error in redo log block
ORA-00353: log corruption near block 6464 change 9979452011066 time 06/27/2009
15:46:47
ORA-00312: online log 1 thread 1: '/dbfiles/data_files/log3.dbf'

user652965 wrote:
Thanks very much for your help guys. I appreciate it. unfortunately none of these commands worked for me. I kept getting error on clearing logs that redo log is needed to perform recovery so it can't be cleared. So I ended up restoring from earlier snapshot of my db volume. Database is now open.
Thanks again for your input.And now, as a follow-up, at a minimum you should make sure that all redo log groups have at least 3 members. Then, if you lose a single redo log file, all you have to do is shutdown the db and copy one of the good members (of the same group as the lost member) over the lost member.
And as an additional follow-up, if you value your data you will run in archivelog mode and take regular backups of the database and archivelogs. If you fail to do this you are saying that your data is not worth saving.

Is it possible to use Archive Redo log file

Hi friends,
My database is runing in archive log mode.I had taken cold backup on Sunday but i am taking archive log file daily evening.
Wednesday my database crash that means i lost all control file,redo log file,datafile etc.
I have archived log file backup till Tuesday Night and other files like control file,datafile etc of Sunday .
1)Is it possible to recover database till tuesday if yes HOW to use archive log file.
(See SCN no of control file and datafiles is same ,if we use RECOVER DATABASE command oracle shows that media recovery is not requide.)
we don't have current control file we had lost in media crash.
null

Dear friend
In this scenario
you lost the contorl file
1>If you have old copy of Contorl file,
which has the current structure of the
database and all the archive files then
you can recover the database with
Ponint in time recovery (Using Backup Controlfile)
suresh

Recover from missing files(redo log file/control file) and state of the DB

Hello,
i hv go through the doc. as well. But have some doubts what will happen in each on these situations.
Pls help me to clarify these!
Scenario is like this;
hv 3 redo log files - multiplxed
hv 3 control files - multiplxed
- What will happen if 1 redo log file missing when starting the DB?
- What will happen if 1 redo log file missing when using(performing operations) the DB?
(will it recover automatically/db abort/even redo log lost will the DB run as usual... ?)
-How to recover this lost redo log?
- What will happen if 1 control file missing when starting the DB?
- What will happen if 1 control file missing when using(performing operations) the DB?
(will it recover automatically/db abort/even control file lost will the DB run as usual... ?)
-How to recover this lost redo log?
thanks

- What will happen if 1 redo log file missing when starting the DB?IF you have multiplexed the members you can drop the lost file and will be able to open the DB
What will happen if 1 redo log file missing when using(performing operations) the DB?Again if multiplexed it will drop a warinign in the alert log and contnue to write on othere members
http://download.oracle.com/docs/cd/B19306_01/backup.102/b14191/recoscen.htm#sthref1385
- What will happen if 1 control file missing when starting the DB?Just remove the entry from the init.ora and start the DB
What will happen if 1 control file missing when using(performing operations) the DB?Will shutdown

REDO log files lost!!!!!

Similar Messages

Maybe you are looking for